L2C0093TRWireless Charging Module

Letter of Authorization and Anti- Drug Statement Applicant Name: APTIV Address: 5725 Innovation Drive, Troy, MI, 48098, USA Product Name: WIRELESS CHARGER Model Number: WCPMA-TX FCC ID: L2C0093TR We authorize: CETECOM Inc., to act on our behalf on all matters concerning the above named equipment. We declare that CETECOM Inc. is allowed to forward all information related to the approval project to the Federal Communications Commission and discuss any issues concerning the approval application. The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes. Does the applicant or authorized agent so certify? ☐ Yes I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application. If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time. Signature of Authorized Person Filing: Title: EGM – EMC Design Date: 13FE24

Aptiv Services US, LLC, 13085 Hamilton Crossing Blvd, Carmel INDIANA 46032 USA Federal Communication Commission 7435 Oakland Mills Road Columbia, MD 21046 14FEB24 Attestation Statement according to 2.911(d)(5)(i) and 2.911(d)(5)(ii) FCC ID: L2C0093TR TO WHOM IT MAY CONCERN: Hereby we certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Further we certify that, as of the date of the filing of the application, Aptiv Services US, LLC is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, _______________ Aptiv Services US, LLC 13085 Hamilton Crossing Blvd, Carmel, INDIANA 46032 USA Brian Johnson NARTE Certified Master EMC Engineer +1 765.867.4179 [email protected]

Aptiv Services US, LLC, 13085 Hamilton Crossing Blvd, Carmel INDIANA 46032 USA Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA 13FE24 Attestation Statement according to 2.911(d)(7) (FRN) 0025770405 FCC ID: L2C0093TR TO WHOM IT MAY CONCERN: Aptiv Services US, LLC, 13085 Hamilton Crossing Blvd, Carmel, INDIANA 46032 USA with FCC Registration Number (FRN) 0025770405 Certifies that, as of the date of this filing of the application with the TCB, Brian W. Johnson is our designated US agent for service of process for the above referenced FCC ID. Aptiv Services US, LLC accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. Aptiv Services US, LLC with FCC Registration Number (FRN) 0025770405 Accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above referenced FCC ID. Sincerely _______________ Aptiv Services US, LLC 13085 Hamilton Crossing Blvd, Carmel, INDIANA 46032 USA Brian Johnson NARTE Certified Master EMC Engineer +1 765.867.4179 [email protected]

Agency Authorization Aptiv Services US, LLC, 13085 Hamilton Crossing Blvd, Carmel INDIANA 46032 USA I herewith authorize Rami Saman Senior Manager Project Management & ITA CETECOM Inc., 411 Dixon Landing Road, Milpitas, CA 95035 USA to act on our behalf in all matters relating to the application for authorization of the equipment < L2C0093TR, WCPMA-TX> at the Federal Communications Commission (FCC) and Industry Canada (IC) and according to the applicable FCC and IC rule parts. We confirm that we are aware of the responsibilities of applicants / grantees related to the authorization of the identified equipment, including those applying for the period after the authorization has been granted and that those responsibilities still reside with us. by / on: __________________________ __ Brian Johnson ____ (signature / date) (print name) title: ___ NARTE Certified Master EMC Engineer ___ on behalf of: __ Aptiv Services US, LLC __ (company name) Telephone & Email: ___+1 765.867.4179______ [email protected] __________

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: Subject: Request for Short Term Confidentiality FCC-ID: L20093TR To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, Full Company Name hereby requests short term confidentiality for documents filed under the following exhibit types: 1. External Photographs 2. Internal Photographs 3. User / Instruction Manual 4. Test Set-up Photographs until the product will be publicly announced. Short term confidentiality release date / period: 180 days from grant issue date These items contain detailed system and equipment description and related information about the product which Aptiv Services US, LLC considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Aptiv Services US, LLC also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are informed and aware of our obligation that we have to inform the involved TCB in written and in due time if we intend to market the product prior to the above specified confidentiality release date so that the short term confidentiality classification can be reset prior to product launch. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Best Regards, ____________________________________ Signature Name: Brian Johnson Title: EGM – EMC Design Company Name: Aptiv Services US, LLC, Address: 13085 Hamilton Crossing Blvd, Carmel, INDIANA 46032, USA 13FE24

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21048 Date: 13FE24 Subject: Request for Permanent Confidentiality FCC ID: L20093TR To Whom It May Concern: In accordance with §0.457(d) and §0.459 of CFR 47, and KDB 726920, Full Company Name hereby requests permanent confidentiality for documents filed under the following exhibit types: 1. Block Diagram 2. Schematic Diagram 3. Part List 4. Operational Description These items contain detailed system and equipment description and related information about the product which Aptiv Services US, LLC considers to be proprietary, confidential and a custom design which otherwise would not be released to the general public. Since this design is a basis from which future technological products will evolve, Aptiv Services US, LLC also feels that this information would be of benefit to its competitors, and that the disclosure of the information in these exhibits would give our competitors an unfair advantage in the market. We are aware that exhibit types cover letters, attestations, label document, test reports, RF exposure information (SAR and MPE reports), cannot be requested to be classified confidential and are thus subject to publication, as will be documents of all other exhibits types for which we have not requested a confidentiality classification. Best Regards, _______________________________ Signature Name: Brian Johnson Title: EGM – EMC Design Company Name: Aptiv Services US, LLC, Address: 13085 Hamilton Crossing Blvd, Carmel, INDIANA 46032, USA

DT WCPM LABEL 35616611 A01OF 12:111 J.GUZDEK 10MY22 E.WALLACE10MY22 J.MECCA10MY22 J.LIVINGSTON10MY22 COPYRIGHT APTIV. ALL RIGHTS RESERVED. THIS DRAWING IS THE PROPERTY OF APTIV AND CONTAINS APTIV CONFIDENTIAL INFORMATION. THE REPRODUCTION, DISTRIBUTION AND UTILIZATION OF THIS DOCUMENT OR ITS RELATED CAD MATH DATA, AS WELL AS COMMUNICATION OF ANY CONTENT TO OTHERS, WITHOUT EXPRESS AUTHORIZATION, IS PROHIBITED. SEE BOM RI WARREN, OH CONNECTION SYSTEMS DWG STATUS REVISION HISTORY DATESTG N/P AUTH APVD 2 CHG APVD 1 ZONEDR REV A LINE DRAWN THROUGH A PART NUMBER INDICATES THAT PHYSICAL PARTS ARE NOT AVAILABLE FOR ORDERING. PART NUMBERS THAT DO NOT HAVE A LINE PRESENT INDICATE THAT PHYSICAL PARTS ARE AVAILABLE FOR ORDERING. CONTACT APTIV SALES TO ASSURE AVAILABILITY OF PARTS. DWG TYPE VOLUME (CM 3 ) STYLE DISTR CODE ALL DIMENSIONS ARE IN UNLESS OTHERWISE SPECIFIED REFERENCE DO NOT SCALE USE MATH DATA WEIGHT: 0.10g THIS DOCUMENT IS IN ACCORDANCE WITH ASME Y14.5-2009. SEE DELPHI ENGINEERING DESIGN STANDARD B6 2017 FOR ISO 1101:2004 RECONCILIATION REQUIREMENTS. THIRD ANGLE PROJECTION MILLIMETERS ANGULAR TOLERANCE DIMENSIONAL RANGE (MM)CHART TOLERANCE UNLESS OTHERWISE SPECIFIED FROM TO E 0 20 20 30 30 70 70 100 100 0.150.20.30.40.5 2 10MY22RAPRODUCTION RELEASED002828JGEWJM PART DRAWING D NOTES: 1. ALL CHARACTERS, TEXT, AND SYMBOLS SHALL BE POSITIONED APPROXIMATELY AS SHOWN. CHARACTERS SHOWN ARE FOR REFERENCE ONLY. THERE MUST BE A 2MM KEEPOUT ZONE BETWEEN THE LABEL AND ANY PRINTED TEXT OR GRAPHICS. 2. LABEL COLOR SHALL BE BLACK TEXT AND GRAPHICS ON A WHITE BACKGROUND. LABEL PRINTER OF 600 DPI SHALL BE USED (VERIFY WITH PML). 3. DATA STRUCTURE CHARACTERISTIC REQUIREMENTS: MINIMUM REQUIREMENTS OF THE DATA STRUCTURE/CHARACTERISTICS TO GUARANTEE A READABLE/SCANNABLE SYMBOL: NOTE 1) ADHERE TO ECC200 ERROR CORRECTION LEVEL FOR DATA MATRIX REFERENCED AIAG B 4 ISSUE 03 NOTE 2) ISOIEC 15415 - A GENERAL READABILITY STANDARD TO EVALUATE 2D DATA MATRIX SYMBOL PRINT QUALITY 4. 2D MATRIX SECTION: THE 2D DATA MATRIX SHOULD PRESENT INFORMATION AS A SINGLE STRING OF CHARACTERS WITH NO SPACES OR DEAD ZONES. 2MM WHITE SPACE REQUIRED ON ALL 4 SIDES OF 2D DATA MATRIX. CONTENTS TO BE: [)> R S 06 G S PCCCCCCCCCC G S 1PAAAAAAAAR G S SAAAAMYYDDDFFFFF R S E OT [)>= CHARACTERS AS SHOWN 06= NUMBERS SHOWN R S = RECORD SEPARATER (ASCII 30) G S = GROUP SEPARATER (ASCII 29) E OT = END OF TRANSMISSION (ASCII 04) P= "P", CUSTOMER PART NUMBER IDENTIFIER CCCCCCCCCC= CUSTOMER PN (SEE NOTE #6) 1P= "1P", APTIV PART NUMBER IDENTIFIER AAAAAAAAR= APTIV P/N AND REVISION LEVEL (SEE NOTE #7) S= SERIAL NUMBER IDENTIFIER AAAAMYYDDDFFFFF= SERIAL NUMBER (SEE NOTE #5) 5. SERIAL NUMBER SECTION: SAAAAMYYDDDFFFFF VALUE TO BE: S= SERIAL NUMBER IDENTIFIER AAAA= LAST 4 DIGITS OF THE APTIV P/N DEFINED ON PRODUCT FINAL ASSEMBLY PRINT M= "M", APTIV SUPPLIER CODE FOR MATAMOROS MEXICO PLANT YY= YEAR- LAST 2 DIGITS OF YEAR OF MANUFACTURE (IE FOR 2023 USE "23") DDD= JULIAN DATE FFFFF= SEQUENCE NUMBER- 5 DIGIT SERIAL CALCULATE BY SOFTWARE DAILY RESET. THIS IS BASE 10, 00001-99999 AND RESETS AT JULIAN DATE CHANGE. 6. CUSTOMER P/N SECTION: CCCCCCCCCC VALUE: 10 CHARACTER CUSTOMER P/N DEFINED ON PRODUCT FINAL ASSEMBLY PRINT (NOTE: THIS VALUE IS DIFFERENT FOR THE PRODUCT VARIANTS "WCPM1" AND "WCPM3). 7. APTIV P/N SECTION: AAAAAAAAR VALUE: 8 CHARACTER APTIV P/N FOLLOWED BY 1 CHARACTER REVISION LEVEL DEFINED ON PRODUCT FINAL ASSEMBLY PRINT (NOTE: THIS VALUE IS DIFFERENT FOR THE PRODUCT VARIANTS "WCPM1" AND "WCPM3). 8. S CODE SECTION: VALUE: 0C096 9. COUNTRY OF ORIGIN SECTION: VALUE: MADE IN MEXICO 10. HUMAN READABLE TEXT TO BE ARIAL NARROW BOLD OR EQUIVALENT AND 1.5MM HEIGHT UNLESS OTHERWISE SPECIFIED. 11. LABEL SHALL MEET PERFORMANCE REQUIREMENTS FOR NON-EXPOSED INTERIOR LABELS.... 12. PRINTED SAMPLE PARTS MUST BE APPROVED BY APTIV ENGINEERING. 13. LEAD (Pb) FREE (LESS THAN 0.1% HOMOGENEOUS MATERIAL). 14. APTIV ANTING, REV A=01, B=02, ETC. 15. QUALITY LINE: SOLID LINE OF 0.50MM THICKNESS TO BE PRINTED PERPENDICULAR TO PRINTER FEED (HORIZONTAL IN DRAWING VIEW) FOR VISUAL DETECTION OF BAD PRINT ELEMENTS. 16. WPC LOGO - QI SYMBOL SIZE 6.35MM MINIMUM HEIGHT 17. FCC ID SECTION: VALUE: "FCC ID: L2C0093TR" FONT: ARIAL NARROW FONT (CAPITALIZED WHERE APPLICABLE) HEIGHT: 1.00MM ITEM NO.PART NUMBERDESCRIPTIONQTY. 135670453LABEL BLANK 76MM X 48MM1 200088875RIBBONAR 25JL22RBP/N IN BOM WAS INCORRECT (35591280), CORRECTED 002849JGEWJM 18AU22RCADDED CUSTOMER P/N, APTIV P/N, S/ CODE ADDED REF DIMS 002888JGEWJM C CODEERROR CORRECTIONECC200 (NOTE 1) FORMATSQUARE DIMENSION XFORMRESOLUTION>0.4MM DIMENSION QUIET ZONE2 CELLS PER SIDE POLARITYBLACK ON WHITE TRANSPORT CAPACITY> 49 ALPHANUMERIC CHARACTERS 1 PRINT QUALITYISOIEC 15415: >3.0 (NOTE 2) 03NO22RDREVISED LABEL REQ, REF NOTES108065 9597 JGEWJM 13AP23RE108066 1035 JGEWJM 122 48 76 1 2.54 2.54 SEE NOTE 6 SEE NOTE 8 SEE NOTE 9 2 12 TRACEABILITY 2D DOT MATRIX SEE NOTE 4 E16 C16 C16 B16 A16 A16 H8 NOTE 4, 5 COMPLETELY NEW NOTES NOTE 6. ADDED CCCCCCCCCC NOTE 7 ADDED PPPPPPPPR VALUE WAS 8 CHARACTER P/N DEFINED ON PRODUCT FINAL ASSEMBLY PRINT NOTE 12 WAS PARTS MUST BE APPROVED..... ADDED NOTE 15 "HORIZONTAL LINE" ADDED APTIV SERVICES US, LLC E E E E E E C SEE NOTE 7 F 12OC23RH9ADDED MODEL: WCPMA REMOVED MOPAR OMEGA "M" ADDED (NOTE: THIS VALUE IS DIFFERENT FOR THE PRODUCT VARIANTS "WCPM1" AND "WCPM3" TO NOTES 6 & 7 108066 2757 JGEWJMF MOPAR SYMBOL SCALE 5:1 12 09NO23RGH9MODEL: WCPMA-TX WAS WCPMA108066 3023 JGEWJM G 04JA24RHNOTE 10 WAS HUMAN.....1.5MM HEIGHT ADDED NOTES 16-18, AND QI SYMBOL TO LABEL 10806 3476 JGEWJM SEE NOTE 15 PRELIMINARY DRAWING DO NOT USE FOR TOOLING OR DISTRIBUTION ECO C/N TBD 6.35 H QI SYMBOL SCALE 5:1 XXXXXXRIREMOVED NOTE: ISED - IC ID SECTION REMOVED SYMBOL ISED FROM LABEL ADDED COUNTRIES TO LABEL NOTES FOR ADDED COUNTRIES ADDED SECOND PAGE ADDED NOTES 18-31 TO SECOND PAGE XXXXXX XXXX JGEWJM SEE NOTE 16 SEE NOTE 17 C16 A16 A16 G8 I K B D 341110 B L 2 9 F 5 F 4 15 G E 8 M 6 A 1214 D H J K 16 E 13 G 681 C A 13 J 101 L 916 …

Text truncated - open the document above for the full version.

Radio Frequency Exposure Evaluation Report Brand: APTIV Services US LLC Model Number: WCPMA-TX Marketing Name: N/A Product Description: Vehicle wireless charger FCC ID: L2C0093TR Per: FCC KDB 680106 D01 Wireless Power Transfer v04 Report number: EMC_APTIV_006_23001_FCC_RF_Exposure DATE: 2024-03-11 CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 V5.0 2015-10-27 © Copyright by CETECOM Test Report #: EMC_APTIV_006_23001_FCC_RF_Exposure FCC ID: L2C0093TR Date of Report 2024-03-11 Page 2 of 8 Page 2 of 8 1 Assessment This RF Exposure evaluation report provides evidence for compliance of the below identified device with the RF Exposure limits for wireless power transfer devices as defined in FCC KDB 680106 D01 Wireless Power Transfer v04. The device meets the limits as stipulated by the above given FCC rule parts based on available specifications. Company Description Model # APTIV Services US LLC Vehicle wireless charger WCPMA-TX Report Reviewer: 2024-03-11 Compliance Guangcheng Huang (Senior EMC Test Engineer / Technical Consultant) Date Section Name Signature Responsible for the Report: 2024-03-11 Compliance Cheng Song (EMC Engineer) Date Section Name Signature Test Report #: EMC_APTIV_006_23001_FCC_RF_Exposure FCC ID: L2C0093TR Date of Report 2024-03-11 Page 3 of 8 Page 3 of 8 2 Administrative Data 2.1 Identification of the Testing Laboratory Issuing the Test Report Company Name: CETECOM Inc. Department: Compliance Street Address: 411 Dixon Landing Road City/Zip Code Milpitas, CA 95035 Country USA Telephone: +1 (408) 586 6200 Fax: +1 (408) 586 6299 Senior EMC Test Engineer / Technical Consultant: Guangcheng Huang Responsible Project Leader: Rami Saman 2.2 Identification of the Client / Manufacturer Client’s Name: APTIV Services US LLC Street Address: 13085 Hamilton Crossing Blvd City/Zip Code Carmel IN 46032 Country USA Identification of the Manufacturer Manufacturer’s Name: Aptiv / Luke Berry Manufacturers Address: 5725 Innovation Drive City/Zip Code Troy MI 48098 Country USA Test Report #: EMC_APTIV_006_23001_FCC_RF_Exposure FCC ID: L2C0093TR Date of Report 2024-03-11 Page 4 of 8 Page 4 of 8 3 Equipment under Assessment Brand APTIV Services US LLC FCC ID L2C0093TR Model Number WCPMA-TX Marketing Name N/A HW Version PV1 SW Version A3.0.2 Product Description Vehicle wireless charger Radio Information as declared Qi Antenna Information as declared N/A Max. declared Output Power: 15W Modulation: FSK Frequency Range / number of channels (All Radios) 115-205 KHz Fixed 127.7 kHz Power Supply/ Rated Operating Voltage Range 9 VDC – 16 VDC Operating Temperature Range Charging temp: -40°C – 55°C, Operating temp: -40°C – 85°C Sample Revision Production Pre-production EUT Diameter n < 60cm Note: Details about the Equipment Under Test (EUT) are provided by the client or applicant. Test Report #: EMC_APTIV_006_23001_FCC_RF_Exposure FCC ID: L2C0093TR Date of Report 2024-03-11 Page 5 of 8 Page 5 of 8 4 RF Exposure Requirement 4.1 FCC KDB 680106 D01 Wireless Power Transfer v04, section 3.1 Mobile Device and Portable Device Configurations Wireless power transfer devices must comply with RF exposure requirements for all design configurations in which they can operate. At a minimum, RF exposure must be evaluated for the worst-case scenario, typically when the transmitter, while delivering energy to a client device, is operating at maximum output power. RF exposure compliance for equipment authorization must be determined following the guidance of KDB 447498, which includes consideration of the different test requirements for Mobile Device and Portable Device exposure categories, as defined in §§ 2.1091 and 2.1093 of the Rules. Sometimes, a device may meet the RF exposure compliance requirements for a specified minimum distance for all but the most unlikely use conditions. For example, some typical desktop applications, such as wireless charging pads connected to household power, operate only when the active coil is covered and coupled with the target, and are characterized by a form factor that would discourage any on-body use because of size and/or weight. Thus, these devices may be considered to meet the § 2.1091-Mobile conditions (“generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the RF source's radiating structure(s) and [the nearest person]”), and may be tested for compliance according to the applicable procedures for Mobile devices that are less onerous than those for Portable devices. In other analogous cases, still for a Mobile device, RF Exposure compliance may be ensured only for a minimum separation distance that is greater than 20 cm, while use conditions at smaller distances can still be considered unlikely. For these scenarios, the equipment authorization of the device may be allowed, on a case-by-case basis, only after receiving FCC concurrence. This procedure requires the submittal of a KDB Inquiry selecting “Equipment Compliance Review” (ECR) as the first category, and “Minimum RF Exposure Compliance Distance” as the second category. Test Report #: EMC_APTIV_006_23001_FCC_RF_Exposure FCC ID: L2C0093TR Date of Report 2024-03-11 Page 6 of 8 Page 6 of 8 4.2 FCC KDB 680106 D01 Wireless Power Transfer v04, section 3.2 Equipment Authorization Procedures for Devices Operating at Frequencies Below 4 MHz The RF exposure limits, as set forth in § 1.1310, do not cover the frequency range below 100 kHz for Specific Absorption Rate (SAR) and below 300 kHz for Maximum Permitted Exposure (MPE). In addition, present limitations of RF exposure evaluation systems prevent an accurate evaluation of SAR below 4 MHz. For these reasons, a specific MPE-based RF Exposure compliance procedure for devices operating in the aforementioned low-frequency ranges…

Text truncated - open the document above for the full version.

A2LA Accredited IC recognized # 3462B CETECOM Inc. 411 Dixon Landing Road  Milpitas, CA 95035  U.S.A. Phone: + 1 (408) 586 6200  Fax: + 1 (408) 586 6299  E-mail: [email protected]  http://www.cetecom.com CETECOM Inc. is a Delaware Corporation with Corporation number: 2905571 © Copyright by CETECOM FCC Test Report Brand: APTIV Services US LLC Model: WCPMA-TX Marketing Name N/A Product Description: Vehicle wireless charger FCC ID: L2C0093TR Applied Rules and Standards: 47 CFR Parts: 18 REPORT #: EMC_APTIV_006_23001_FCC_18 DATE: 2024-03-12 Test Report #: EMC_APTIV_006_23001_FCC_18 FCC ID: L2C0093TR Date of Report 2024-03-12 Page 2 of 15 TABLE OF CONTENTS 1 ASSESSMENT .............................................................................................................................................................. 3 2 ADMINISTRATIVE DATA ............................................................................................................................................... 4 2.1 IDENTIFICATION OF THE TESTING LABORATORY ISSUING THE EMC TEST REPORT ........................................................................... 4 2.2 IDENTIFICATION OF THE CLIENT ............................................................................................................................................. 4 2.3 IDENTIFICATION OF THE MANUFACTURER ................................................................................................................................. 4 3 EQUIPMENT UNDER TEST (EUT) ................................................................................................................................... 5 3.1 EUT SPECIFICATIONS ......................................................................................................................................................... 5 3.2 EUT DETAILS ..................................................................................................................................................................... 6 3.3 ACCESSORY EQUIPMENT (AE) DETAILS ................................................................................................................................... 6 3.4 TEST SETUP CONFIGURATIONS ............................................................................................................................................. 6 3.5 MODE OF OPERATION DETAILS .............................................................................................................................................. 6 3.6 JUSTIFICATION FOR WORST CASE MODE OF OPERATION ............................................................................................................ 6 4 SUBJECT OF INVESTIGATION ...................................................................................................................................... 7 4.1 DATE OF TESTING: .............................................................................................................................................................. 7 4.2 MEASUREMENT UNCERTAINTY .............................................................................................................................................. 7 4.3 ENVIRONMENTAL CONDITIONS DURING TESTING: ...................................................................................................................... 7 4.4 DECISION RULE: ................................................................................................................................................................. 7 5 MEASUREMENT PROCEDURES .................................................................................................................................... 8 5.1 RADIATED MEASUREMENT .................................................................................................................................................... 8 5.2 SAMPLE CALCULATIONS FOR FIELD STRENGTH MEASUREMENTS ................................................................................................. 9 5.3 FIELD STRENGTH CORRECTION BASED ON DISTANCE ................................................................................................................ 9 6 MEASUREMENT RESULTS SUMMARY ........................................................................................................................ 10 7 TEST RESULT DATA .................................................................................................................................................. 11 7.1 RADIATED EMISSIONS MEASUREMENT ACCORDING TO CFR 47 PART 18.305. .............................................................................. 11 8 TEST SETUP PHOTOS ................................................................................................................................................ 14 9 TEST EQUIPMENT AND ANCILLARIES USED FOR TESTING ......................................................................................... 14 10 REVISION HISTORY ................................................................................................................................................... 15 Test Report #: EMC_APTIV_006_23001_FCC_18 FCC ID: L2C0093TR Date of Report 2024-03-12 Page 3 of 15 1 Assessment The following device as further described in section 3 of this report was evaluated against the applicable criteria specified in the Code of Federal Regulations Title 47 parts 18. No deficiencies were ascertained. Company Description Model # APTIV Services US LLC Vehicle wireless charger WCPMA-TX Report Reviewer: 2024-03-12 Compliance Guangcheng Huang (Senior EMC Test Engineer / Technical Consultant) Date Section Name Signature Responsible for the Report: 2024-03-12 Compliance Cheng Song (EMC Engineer) Date Section Name Signature The test results of this test report relate exclusively to the test item specified in Section3. CETECOM Inc. USA does not assume responsibility for any conclu…

Text truncated - open the document above for the full version.