LDK102077802.11an Router

REVIEW DRAFT—CISCO CONFIDENTIAL Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco Aironet 600 Series OfficeExtend Access Point User Guide The Cisco Aironet 600 Series OfficeExtend Access Point User Guide includes the following information: •Unpacking the Cisco Aironet 600 Series OfficeExtend Access Point •Cisco Aironet 600 Series OfficeExtend Access Point Overview •Installation Guidelines •Cisco Aironet 600 Series OfficeExtend Access Point Radio Frequency Coverage •Understanding Cisco Aironet 600 Series OfficeExtend Access Point LEDs •Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point •Configuring a Primary IP Address on a Cisco Aironet 600 Series OfficeExtend Access Point •Viewing the Event Log •Accessing Online Help •Troubleshooting •Cisco Aironet 600 Series OfficeExtend Access Point Local Customer Interface •Declarations of Conformity and Regulatory Information Unpacking the Cisco Aironet 600 Series OfficeExtend Access Point Each Cisco Aironet 600 Series OfficeExtend Access Point package contains the following items: •Cisco Aironet 600 Series OfficeExtend Access Point •Ethernet Cable •Cisco Aironet AP600 Series Power Module (universal power supply) •Quick reference guide •Cisco product registration and Cisco documentation feedback cards REVIEW DRAFT—CISCO CONFIDENTIAL 2 Cisco Aironet 600 Series OfficeExtend Access Point User Guide Cisco Aironet 600 Series OfficeExtend Access Point Overview Cisco Aironet 600 Series OfficeExtend Access Point Overview 1Power Connector5Ethernet [E] LEDs 1 through 4 2Ethernet Ports 1 through 46Status LED 3WA N P o r t7Power Indicator LED 4Power Toggle Switch8 REVIEW DRAFT—CISCO CONFIDENTIAL 3 Cisco Aironet 600 Series OfficeExtend Access Point User Guide Installation Guidelines Installation Guidelines To install the Cisco Aironet 600 Series OfficeExtend Access Point, follow these steps: Step 1Plug the Ethernet cable into the Ethernet port. Step 2Insert the other end of the Ethernet cable into an Ethernet port 1, 2, or 3 of your router. NoteEthernet port 4 should not be used. Step 3Plug the power cord into the power connector. Step 4Plug the power cord into your power source. Step 5Press the power toggle switch to the on position. Step 6Use the 600 Series OfficeExtend Access Point LED table below (Ta b le 1) to better understand the Status LED and the Ethernet LEDs located on the top panel of the access point. NoteThe first time you connect the 600 Series OfficeExtend Access Point, the process may take anywhere between 2 and 15 minutes due to an image download. If more than 10 access points are joining, the process could take as long as 60 minutes. When associated, your access point Status LED on the top panel displays a solid blue. NoteYou do not need to configure any SSIDs for your 600 Series OfficeExtend Access Point to connect to your company’s network. The access point receives the company’s SSID when it connects to the company network by way of the Internet. If you have any problems connecting to your company’s network, contact your IT administrator. You can configure your local SSID WLAN for other devices. See “Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point” for more information. CautionBe careful when handling the 600 Series OfficeExtend Access Point. The bottom may be HOT. TipTo manage the heat generated from the access point, maintain air flow between the metal plate of the access point and the surface on which it is placed. A laptop cooling pad (such as ones containing gel or cooling crystals) is a possible option for an access point placed on a flat surface. Another option for managing the heat is to hang the access point on a wall. DSL/Cable Modem RouterOfficeExtended AP Client 275941 REVIEW DRAFT—CISCO CONFIDENTIAL 4 Cisco Aironet 600 Series OfficeExtend Access Point User Guide Cisco Aironet 600 Series OfficeExtend Access Point Radio Frequency Coverage NoteCisco Aironet 600 Series OfficeExtend access points are designed to work behind a router or other gateway device that is using network address translation (NAT). NAT allows a device, such as a router, to act as an agent between the Internet (public) and a personal network (private), thereby enabling an entire group of computers to be represented by a single IP address. In controller software release 6.0, only one Cisco Aironet 600 Series OfficeExtend access point can be deployed behind a single NAT device. Cisco Aironet 600 Series OfficeExtend Access Point Radio Frequency Coverage To ensure the best RF coverage for your access point, keep the following in mind: •Position the access point lower than or with the LED side facing your devices. NoteMost of the coverage area is located towards the LED side of the access point. •If the access point is in close proximity and above your device, the signal may become skewed. Understanding Cisco Aironet 600 Series OfficeExtend Access Point LEDs You can use the Status LED on the top panel or the Ethernet LED in the cable bay area to assess the unit status. The table below displays LED status indications for AP600s ( Ta b l e 1). Ta b l e 1LED Status Indications for AP600 Status LED (Top of Unit) Ethernet LED (Cable Bay Area)Description OffOffNormal bootloader operation. OffOffLinux start. Evora/CAPWAP start. FlashingOn if a local client is associated. Otherwise, off. CAPWAP Discovery Join in process. On if CAPWAP is connected On if a client is associated Association Status. OnFlashingSoftware Upgrade. FlashingFlashing out of sequence from Status LED (LED 1 on, LED 2 off, LED 1 off, LED2 of) No IP Address/Ethernet is not up. FlashingFlashing in sequence with Status LED Bootloader warnings. REVIEW DRAFT—CISCO CONFIDENTIAL 5 Cisco Aironet 600 Series OfficeExtend Access Point User Guide Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend Access Point Configuring a Personal SSID on a Cisco Aironet 600 Series OfficeExtend …

Text truncated - open the document above for the full version.

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 December 8, 2010 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern: I, the undersigned, hereby authorize Ms. Claire Hoque/Application Examiner of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Claire Hoque of CCS on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Jim Nicholson Compliance Engineer Cisco Systems, Inc

December 20, 2010 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: In reference to the application under FCC ID: LDK102077 and pursuant to Sections 0.457(d)(l)(ii) and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of the accompanying information as outlined below: Schematics Block Diagram Hardware Theories of Operation Antenna Specifications These documents contain detailed system and equipment description and related information about the product that Cisco considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Cisco considers that this information would be of benefit to its competitors, and that disclosure of the information in these documents would give competitors an unfair advantage in the market. Best Regards, Jim Nicholson EMC Compliance Engineer 4125 Highlander Parkway Richfield, Ohio 44286 Email: [email protected] Direct: (330)523-2094

EOAP602 External Photos

EOAP602 Internal Photos

Custom EMC Test Report No: EDCS - 959823 Page No: 1 of 72 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Test Report AIR-OEAP602I-A-K9 Cisco Aironet 802.11n Dual Band Access Point FCC ID: LDK102077, IC: 2461B-102077 Also covers AIR-OEAP602I-N-K9 and AIR-OEAP602I-T-K9 2400-2483.5 MHz Against the following Specifications: CFR47 Part 15.247 RSS210 Cisco Systems 170 West Tasman Drive San Jose, CA 95134 Custom EMC Test Report No: EDCS - 959823 Page No: 2 of 72 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential This test report has been electronically authorized and archived using the CISCO Engineering Document Control system. SECTION 1: OVERVIEW ......................................................................................................................................... 3 1.1 TEST SUMMARY ...................................................................................................................................................... 3 SECTION 2: ASSESSMENT INFORMATION ...................................................................................................... 4 2.1 GENERAL ................................................................................................................................................................. 4 2.4 TESTING FACILITIES ............................................................................................................................................... 5 2.6 EUT DESCRIPTION .................................................................................................................................................. 5 SECTION 4: SAMPLE DETAILS ............................................................................................................................. 6 APPENDIX A: EMISSION TEST RESULTS .................................................................................................. 7 APPENDIX B: EMISSION TEST RESULTS ................................................................................................ 44 MAXIMUM PERMISSIBLE EXPOSURE (MPE) CALCULATIONS .................................................................................. 70 APPENDIX C: TEST EQUIPMENT/SOFTWARE USED TO PERFORM THE TEST ............................... 72 Custom EMC Test Report No: EDCS - 959823 Page No: 3 of 72 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Section 1: Overview 1.1 Test Summary samples were assessed against the tests detailed in section 3 under the requirements of the following specifications: Emission Immunity CFR47 Part 15.247 RSS210 N/A The specifications listed above represent actual tests performed to demonstrate compliance against the specifications and basic standards listed on the front cover of this report. This list is not a one to one match to the front cover for one or more of the following reasons. 1. Basic standards call up many different test phenomena specifications such as the 61000-4-X series. The basic standards define which elements and levels shall be applied from these specifications and as such it is not appropriate to list the individual specifications on the front cover. 2. A Standard listed on the front cover may be required in a particular country but is not appropriate for the particular technologies included in the equipment under test. E.g. You cannot test a DC product to the mains Harmonics requirements in EN61000-3-2. See section 3.2. 3. Test results against a particular standard or specification may be included in a different test report. See section 3.2 for an EDCS reference of this data. 4. Where appropriate, Cisco may have substituted a later revision of a basic standard to those referenced in the specification on the front sheet of this test report. This decision was based upon improved test methodology and repeatability and/or where the newer revision represented a more stringent test. 5. Where relevant, testing has been carried out to the requirements of both EN and IEC Specifications. This was possible because of the similarities of the test methods involved and the Cisco EMC test procedures. 6. Testing may have been performed to an equivalent test that satisfies the requirements of the standards and specifications listed on the front cover of the report. See section 3.2. 7. Where radiated emissions testing has been performed to EN55022/CISPR22 the additional requirements of VCCI: V- 3/2006.04, EN55022: 1994 +A1/2 and CAN/CSA- CISPR 22-02 have also been evaluated unless otherwise stated. 8. Testing to the requirements of CFR47 Part 15 was performed against the CISPR22 limits. The results are therefore deemed satisfactory evidence of compliance with Industry Canada Interference Causing Equipment Standard ICES-003. 9. Where assessment has been performed to CISPR24, all the applicable test requirements may have not been covered. Refer to the results section for the tests performed. Notes: 1) Where a specification listed on the front cover of this report has deviations from the basic standards listed above, the additional technical requirements of the specification were also assessed. 2) Where appropriate, Cisco may have substituted a later revision of a basic standard to those referenced in the specification on the front sheet of this test report. This decision was based upon improved test methodology and repeatability and/or where the newer revision represented a more stringent test. 3) Where relevant, testing has been carried out to the requirements of both EN and IEC Specifications. This was possible because of the similarities of the test methods involved and the Cisco EMC test procedures. Custom EMC Test Report No: EDCS - 959823 Page No: 4 of 72 This d…

Text truncated - open the document above for the full version.

Custom EMC Test Report No: EDCS - 959828 Page No: 1 of 48 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Test Report AIR-OEAP602I-A-K9 Cisco Aironet 802.11n Dual Band Access Point 5725-5850 MHz FCC ID: LDK102077, IC: 2461B-102077 Also covers AIR-OEAP602I-N-K9 and AIR-OEAP602I-T-K9 Against the following Specifications: CFR47 Part 15.247 RSS210 Cisco Systems 170 West Tasman Drive San Jose, CA 95134 Author: James Nicholson Approved By: Title: Custom EMC Test Report No: EDCS - 959828 Page No: 2 of 48 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential This test report has been electronically authorized and archived using the CISCO Engineering Document Control system. SECTION 1: OVERVIEW ......................................................................................................................................... 3 1.1 TEST SUMMARY ...................................................................................................................................................... 3 SECTION 2: ASSESSMENT INFORMATION ...................................................................................................... 4 2.1 GENERAL ................................................................................................................................................................. 4 2.4 TESTING FACILITIES ............................................................................................................................................... 5 2.6 EUT DESCRIPTION .................................................................................................................................................. 5 SECTION 4: SAMPLE DETAILS ............................................................................................................................. 6 APPENDIX A: EMISSION TEST RESULTS .................................................................................................. 7 APPENDIX B: EMISSION TEST RESULTS ................................................................................................ 29 MAXIMUM PERMISSIBLE EXPOSURE (MPE) CALCULATIONS ..................................................................................... 46 APPENDIX C: TEST EQUIPMENT/SOFTWARE USED TO PERFORM THE TEST ............................... 48 Custom EMC Test Report No: EDCS - 959828 Page No: 3 of 48 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Section 1: Overview 1.1 Test Summary samples were assessed against the tests detailed in section 3 under the requirements of the following specifications: Emission Immunity CFR47 Part 15.247 RSS210 N/A The specifications listed above represent actual tests performed to demonstrate compliance against the specifications and basic standards listed on the front cover of this report. This list is not a one to one match to the front cover for one or more of the following reasons. 1. Basic standards call up many different test phenomena specifications such as the 61000-4-X series. The basic standards define which elements and levels shall be applied from these specifications and as such it is not appropriate to list the individual specifications on the front cover. 2. A Standard listed on the front cover may be required in a particular country but is not appropriate for the particular technologies included in the equipment under test. E.g. You cannot test a DC product to the mains Harmonics requirements in EN61000-3-2. See section 3.2. 3. Test results against a particular standard or specification may be included in a different test report. See section 3.2 for an EDCS reference of this data. 4. Where appropriate, Cisco may have substituted a later revision of a basic standard to those referenced in the specification on the front sheet of this test report. This decision was based upon improved test methodology and repeatability and/or where the newer revision represented a more stringent test. 5. Where relevant, testing has been carried out to the requirements of both EN and IEC Specifications. This was possible because of the similarities of the test methods involved and the Cisco EMC test procedures. 6. Testing may have been performed to an equivalent test that satisfies the requirements of the standards and specifications listed on the front cover of the report. See section 3.2. 7. Where radiated emissions testing has been performed to EN55022/CISPR22 the additional requirements of VCCI: V- 3/2006.04, EN55022: 1994 +A1/2 and CAN/CSA- CISPR 22-02 have also been evaluated unless otherwise stated. 8. Testing to the requirements of CFR47 Part 15 was performed against the CISPR22 limits. The results are therefore deemed satisfactory evidence of compliance with Industry Canada Interference Causing Equipment Standard ICES-003. 9. Where assessment has been performed to CISPR24, all the applicable test requirements may have not been covered. Refer to the results section for the tests performed. Notes: 1) Where a specification listed on the front cover of this report has deviations from the basic standards listed above, the additional technical requirements of the specification were also assessed. 2) Where appropriate, Cisco may have substituted a later revision of a basic standard to those referenced in the specification on the front sheet of this test report. This decision was based upon improved test methodology and repeatability and/or where the newer revision represented a more stringent test. 3) Where relevant, testing has been carried out to the requirements of both EN and IEC Specifications. This was possible because of the similarities of the test methods involved and the Cisco EMC test procedures. Custom EMC Test Rep…

Text truncated - open the document above for the full version.