LDKAGORA0916ASR 901S Series Aggregation Services Router Module

REVIEW DRAFT—CISCO CONFIDENTIAL v Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router OL-31066-01 Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router November 29, 2013 OL-31066-01 This document provides international agency compliance, safety, and statutory information for the Cisco ASR 901S routers. Read this document before installing or servicing Cisco ASR 901S routers. NoteOnly trained and qualified service personnel (as defined in IEC 60950 and AS/NZS 3260) should install, replace, or service the equipment. Install the system in accordance with the U.S. National Electric Code if you are in the United States. WarningThis warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. This document includes the following sections: •Document Revision History, page vi •Cisco ASR 901 Routers, page vi •Translated Safety Warnings, page vi •European Directives, page lxix •Regulatory Standards Compliance, page lxix •Electromagnetic Compatibility, page lxxi •GR-1089-CORE Issue 6 Documentation Statements, page lxxvii •Obtaining Documentation and Submitting a Service Request, page lxxix REVIEW DRAFT—CISCO CONFIDENTIAL vi Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router OL-31066-01 Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router Document Revision History Document Revision History The Document Revision History table below records technical changes to this document. The table shows the document revision number for the change, the date of the change, and a brief summary of the change. Note that not all Cisco documents use a Document Revision History table. Cisco ASR 901 Routers The Cisco ASR 901S product line consists of the following models: •A901S-4SG-F-D •A901S-3SG-F-D •A901S-2SG-F-D Translated Safety Warnings This section includes translations in multiple languages of the warnings appropriate for the Cisco ASR 901S. These warnings may appear in other documents related to this publication. Translations of the following warnings are included in this section: •Statement 4—Power Supply Warning •Statement 12—Power Supply Disconnection Warning •Statement 38—Power Cabling Warning •Statement 43—Jewelry Removal Warning •Statement 122—Exposed DC Power Wire Warning •Statement 1001—Work During Lightning Activity •Statement 1002—DC Power Supply •Statement 1003—DC Power Disconnection •Statement 1004—Installation Instructions •Statement 1005—Circuit Breaker •Statement 1006—Chassis Warning for Rack-Mounting and Servicing •Statement 1008—Class 1 Laser Product •Statement 1017—Restricted Area •Statement 1018—Supply Circuit Warning •Statement 1019—Main Disconnecting Device •Statement 1021—SELV Circuit •Statement 1022—Disconnect Device •Statement 1023—No. 26 AWG RevisionDateChange Summary OL-31066-01December 2013Initial version of this document. REVIEW DRAFT—CISCO CONFIDENTIAL vii Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router OL-31066-01 Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router Translated Safety Warnings •Statement 1024—Ground Conductor •Statement 1025—Use Copper Conductors Only •Statement 1026—WAN Port Static Shock •Statement 1028—More Than One Power Supply •Statement 1030—Equipment Installation •Statement 1031—EU Public Network Port •Statement 1033—SELV-IEC 60950 DC Power Supply •Statement 1035—Proximity to Water •Statement 1036—Telephone Jacks in Wet Locations •Statement 1037—Uninsulated Wires and Terminals •Statement 1040—Product Disposal •Statement 1041—Disconnecting Telephone-Network Cables •Statement 1043—Installation Hazard •Statement 1045—Short-circuit Protection •Statement 1046—Installing or Replacing the Unit •Statement 1047—Overheating Prevention •Statement 1048—Rack Stabilization •Statement 1052—Installing and Grounding the Antenna •Statement 1058—Power and Relay Connector •Statement 1064—Grounded Equipment Warning •Statement 1065—Console Cable Connection •Statement 1071—Warning Definition •Statement 1074—Comply with Local and National Electrical Codes Statement 4—Power Supply Warning WarningDo not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is connected. For systems without a power switch, line voltages are present within the power supply when the power cord is connected. Waarschuwing U dient de voeding niet aan te raken zolang het netsnoer aangesloten is. Bij systemen met een stroomschakelaar zijn er lijnspanningen aanwezig in de voeding, zelfs wanneer de stroomschakelaar uitgeschakeld is en het netsnoer aangesloten is. Bij systemen zonder een stroomschakelaar zijn er lijnspanningen aanwezig in de voeding wanneer het netsnoer aangesloten is. REVIEW DRAFT—CISCO CONFIDENTIAL viii Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router OL-31066-01 Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation Services Router Translated Safety Warnings Varoitus Älä kosketa virtalähdettä virtajohdon ollessa kytkettynä. Virrankatkaisimella varustetuissa järjestelmissä on virtalähteen sisällä jäljellä verkkojännite, vaikka virrankatkaisin on katkaistu-asennossa virtajohdon ollessa kytkettynä. Järjestelmissä, joissa ei ole virrankatkaisinta, on virtalähteen sisällä verkkojännite, kun virtajohto on kytkettynä. Attention Ne pas toucher le bloc d'alimentation quand le cordon d'alimentation est branché. Avec les systèmes munis d'un commutateur marche-arrêt, des tensions de ligne so…

Text truncated - open the document above for the full version.

BETA DRAFT - CISCO CONFIDENTIAL Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide First Published: May 13, 2013 Last Modified: May 30, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-29732-01 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment causes interference to radio or television reception, which can be determined by turning the equipment off and on, users are encouraged to try to correct the interference by using one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’ s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED "AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL:http:// www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) © Cisco Systems, Inc. All rights reserved. CONTENTS Preface Prefacevii Audiencevii Organizationvii Conventionsviii Related Documentationx Obtaining Documentation and Submitting a Service Requestx CHAPTER 1 Introduction1 Hardware Description1 Cisco ASR 901S Series Aggregation Services Router: Front View2 Cisco ASR 901S Series Aggregation Services Router: Back View5 Cisco ASR 901S Series Aggregation Services Router: Top and Bottom View5 Safety Precautions9 Environmental Monitoring Temperature Sensor10 External Connections and Chassis Cable Ports10 CHAPTER 2 Preparing to Install the Router13 Safety Guidelines13 Safety with Equipment13 Safety with Electricity14 Preventing Electrostatic Discharge Damage15 Safety Warnings16 Prerequisites16 Site Planning17 Site Environment17 Method of Procedure17 Installation Checklist18 Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide OL-29732-01iii Unpacking the Router19 Router Package Contents19 Installation Checklist21 CHAPTER 3 Installing the Router23 Mounting Kits Overview23 General Safety Information for Mounting24 Contents of the Mounting Kits25 Pole Mount Kit25 Wall Mount Bracket Kit27 Band Strap Kit28 Strap Tool Kit28 Customer-Supplied Materials and Tools29 Router-Mounting Instructions…

Text truncated - open the document above for the full version.

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com November 6, 2013 Federal Communications Commission Office of Engineering and Technology Equipment Authorization division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality request for FCC ID LDKAGORA0916 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term n Permanent Block Diagrams n Short Term External Photos n Short Term Permanent* 1 Internal Photos Short Term n Permanent Operation Description/Theory of Operation Short Term n Permanent Parts List & Placement/BOM Short Term n Permanent Tune-Up Procedure Short Term n Permanent Schematics n Short Term Test Setup Photos n Short Term Permanent* User’s Manual Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _45 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Gerard Thorpe MANAGER.HARDWARE ENGINEERING Cisco Systems, Inc.

rooul8ug ocue{duro3 olpeu / JI IiI oxm8Y osof A/ @-7r7q __.. I t- ll 91 60YBOCY-Ar9V7, : (tr CI 9I60\TUOCVXflT :(It J3d sFporu JeprlususJl suruluos arr^ep srqJ : Eur,ttollog egt soptrs 6ur pollelsul lcnpord roJ leqq 'orper uo leq€l uo rsqr$nu tr f,V OI JJd onbrun rr/$o s.trr suq orp?.r or{J (9 '(uodsr E641 ses) I60I'g uud,{q pe}s}s su smsodxs SUJo sluaurermbsr eql s}saur oiper sq; (g ocuerlduroc $t 1.rsd uo luarueluls uo4ulsene ees) 96g'91 gu6 red s1uawannbeJ sqlq1r'u segdruoo Jolcorruor er{J (? 'selru SI 1:"dJo sluauro:rnbeJ uorssnuo snounds elqecqddu oril q4.t,{ldruoc o1 pa;rnber sr Surplarqs Isuolllpps ou pue ssoqtes CU l€tllrrc:aao Surplen{s lrvro s.ll ssrl osrlop or{I (g Suuagnq etrep pu? 3q:e119 pr€oq uo rrvro s.lr ssq or$op eqJ (Z 'pJso orpur eqt e8euep 11rm sa8eqoA rarllo te uorleredo puu o8e11o,r.oAf 'f,,1u slurado ol par,6rsap sr lI 'suorlep8u p.ruoq uo roJ sluaute;mber oW rp1,t\ sarlduror ecrlep eql 'uop€p8or relrod preoq uo ssq acrlop or{J (I '1u'rotdde alnporu peiFull ol acuurlduror dpo Surrurelc e.rc o,r 'lsoq eql uo,{1pg lou pue sssrAsp ocsr3 ur {lyeogrcads pelsel se&r }l aculs 'leaordde a1npou petFuli o} siuereqp€ ur slurod 9 Eultrollog oqt slaoru raqumu CI JI / OI JOd pmueroJor e^oqe or{J 'Jsllol lt,todde oppour pelgrlt roJ rro4€cggsnless lerrcrdde olnpow po]]tlr]l € sr srq] rsr11md 'rgtl -00yC il palels su lenordde slnporu JoJ sluaulaJrnbar snouuA erll sleew acrnop oAoq€ oqJ 9t60w0cY-sI9vT,: (tr f,I 9I60VU0$YX(1:(tr 3Jd 1u*o:ddy olnpo' { ur lucrue}e1s soqs}ssl}v t l0z '08 reqrue^oN ;et?cl

EDCS-1118874 Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com Exhibit : External Photos ASR901S router Connector end ASR901S router Antenna end ASR901S router Back side ASR901S router with Lid removed

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com Exhibit : Internal Photos Model: 73-15453-03 FCC ID: LDKAGORA0916 IC ID: 2461B-AGORA0916 Internal 73-15453-03 radio module (Top of card) Internal – 73-15453-03 Radio module (Bottom of card)

A B D C D C B A 4321 4321 CAD TYPE: PROE SHT 1 OF 1DO NOT SCALE DRAWINGSCALE 5/1 REV 01 DWG NO. 56-20709-01 SIZE C ATWK,RM MODULE,AGORA - 10/15/13MFG SRIKANTH N THIRD ANGLE PROJECTION 10/15/13ENG NAGARAJ A UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: TOLERANCES: .XX
#.01 .XXX
#.005 ANGLES:
#1 10/15/13DES SHANKAR DATEAPPROVAL THIS DRAWING CONTAINS INFORMATION WHICH IS THE PROPRIETARY PROPERTY OF CISCO SYSTEMS. THIS DRAWING IS CONFIDENTIAL AND ITS CONTENTS MAY NOT BE DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF CISCO SYSTEMS. MATERIAL: FINISH: ITEM NO.QTY PART NUMBERDESCRIPTION --- REVISION --- REVDESCRIPTIONECO APPROVE MECHMFG 01PROTO RELEASE-SGSN NOTES: (UNLESS OTHERWISE SPECIFIED) 1. THIS IS A COMPUTER GENERATED DOCUMENT. ALL CHANGES MUST BE MADE IN THE MASTER DATABASE ONLY. 2. FONT: CISCO SANS REGULAR, 4 PT & 7 PT. 3. LABELS FOR MECHANICAL USE - AS PER CISCO SPEC 95-6237-XX. 4. LABEL STOCK, ADHESIVE & PRINTING TEMPERATURE RANGE SHOULD BE -40
$CTO +85
$C. 5. REFERENCES: 95-6085-XX. 6. BLACK COLOR FONT AND LINES MODEL NO OF RADIO MODULE FCC ID OF RADIO MODULE IC OF RADIO MODULE

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com Exhibit : Label Location Model: FCC ID: LDKAGORA0916 IC ID: 2461B- AGORA0916 The location of the Compliance label.

CAD TYPE: PROE 12345678 12345678 A B C D A B C D --- REVISION --- REVDESCRIPTIONECO APPROVE MECHMFG 01P4 BUILD---SGSN 02ART WORK UPDATE---SGSN 03 FCC & IC CODE ADDED,SPACE ADDED FOR CLEI DATE CODE SPACE REMOVED.NOTES UPDATED KDSN ITEM NO.QTY PART NUMBERDESCRIPTION SHT 1 OF 1DO NOT SCALE DRAWINGSCALE 3/2 REV 03 DWG NO. 56-20522-01 SIZE D ATWK COMPLIANCE, AGORA-FA 08/07/13MFG SRIKANTH N THIRD ANGLE PROJECTION -ENG - UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: TOLERANCES: .XX
# .XXX
#- ANGLES:
#- 08/07/13DES SHANKAR G DATEAPPROVAL THIS DRAWING CONTAINS INFORMATION WHICH IS THE PROPRIETARY PROPERTY OF CISCO SYSTEMS. THIS DRAWING IS CONFIDENTIAL AND ITS CONTENTS MAY NOT BE DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF CISCO SYSTEMS. MATERIAL: FINISH: NOTES: (UNLESS OTHERWISE SPECIFIED) 1. THIS IS A COMPUTER GENERATED DOCUMENT. ALL CHANGES MUST BE MADE IN THE MASTER DATABASE ONLY. 2. FONT: CISCO SANS REGULAR, 4 PT & 6 PT. 3. LABEL STOCK, ADHESIVE & PRINTING TEMPERATURE RANGE SHOULD BE -40
$CTO +85
$C. 4. SHALL MEET ADHESIVE REQUIREMENT AS PER DOCUEMNT NO.95-6085-XX. 5. COLOR: TEXT AND GRAPHICS - LOGO BLACK AS PER CISCO SPEC 95-5823-XX BACKGROUND - RAL 9002 & CISCO SAFETY YELLOW PER 95-5823-XX 6. MATERIAL: .002 PRESSURE SENSITIVE WHITE POLYESTER WITH PERMANENT ACRYLIC ADHESIVE. LAMINATION: .001 MATTE POLYESTER. (FLEXCON CLASSICS PLUS 13092 .001 MATTE POLYESTER OR CISCO APPROVED EQUIVALENT) ADHESIVE: ACRYLIC BASE PERMANENT PRESSURE SENSITIVE, OR CISCO APPROVED EQUIVALENT. ADHESIVE COVERED WITH PROTECTIVE PEEL-OFF LINER. 7 LABELS TO BE SUPPLIED IN DIE CUT SHEET FORM. SHEET TO BAGGED AND TAGGED WITH CISCO PART NUMBER, REVISION, AND VENDOR IDENTIFICATION PER CISCO SPECIFICATION 95-0669-XX 8 LABEL MUST BE PROCURED FROM A UL 969 AND CSA 0.15 CERTIFIED VENDOR AND SHALL BEAR THE AGREED UPON IDENTIFICATION MARK. 7 PEEL-OFF TAB CISCO LOGO VENDOR ID PLACEHOLDER CHINESE NAME OF CISCO AGENCY SYMBOLS VCCI-B CLASS 1 LASER WARNING SYMBOLS BACKGROUND COLOR CISCO SAFETY YELLOW CANADA CLASS B CHINESE CLASS B TRANSLATOR FCC CLASS B SYMBOL AND LABEL FOR ELECTROSTATIC SENSITIVE DEVICES BACKGROUND COLOR CISCO SAFETY YELLOW FCC & IC CODE OF RADIO MODULE

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com Exhibit : Internal Photos Model: 73-15453-03 FCC ID: LDKAGORA0916 IC ID: 2461B-AGORA0916 Internal 73-15453-03 radio module (Top of card) Internal – 73-15453-03 Radio module (Bottom of card)

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com Exhibit : Internal Photos Model: 73-15453-03 FCC ID: LDKAGORA0916 IC ID: 2461B-AGORA0916 Internal – PCB mains board of ASR901 router ( Top View) The 73-15453-03 radio module plugs into the mini PCIe slot of the ASR901 router main board here. Internal– PCB mains board of ASR901 router (Bottom) ASR901 Antenna cable connetion The 73-15453-03 radio module plugs into the antenna cable of the ASR901 router main board here.

EDCS#: 1297610 RF Exposure Study - Engineering Analysis per FCC 2.1093 Industry Canada RSS-102 2.4GHz WLAN Radio 802.1 b/g M/N : 73-15453-03 FCC ID : LDKAGORA0916 IC : 2461B-AGORA0916 Supplementary Appendix to Report EDCS# 1261389 Prepared By: Cisco Systems Inc 170 West Tasman San Jose, CA 95134 USA EDCS#: 1297610 1.0: Attestation Statement of Compliance The Cisco Systems 2.4GHz WLAN Radio PCIe card, 802.11 b/g P/N: 73-15453-03 has been evaluated for Maximum Permissible Exposure in compliance with 47 Code of Federal Regulations 2.1093. The evaluation was in accordance with methodology as referenced in FCC Bulletin OET 65C (rev 01-01) by Compliance Certification Services This report serves as the additional technical analysis of the Cisco radio modules This study addresses the addition of an additional pair of transmitters using the data derived in the afore mentioned report # 1261389. The limits used for this evaluation are in line with the recommendations of the World Health Organizations (WHO) International Committee on Non Ionizing Radiation Protection (ICNIRP) as well as the American National Standards Institute (ANSI) C95.1. The limits chosen are of General Population/Uncontrolled Exposure. The device is pole mounted. The device is high enough that it is not accessible by the general public This analysis also complies with the requirements stated in Industry Canada RSS-102 as well as the applicable Australian and New Zealand regulations. Only the following case scenario was used which are: 2.4GHz WLAN Module : FCC ID: LDKAGORA0916 , IC : 2461B-AGORA0916 Output power listed is conducted. The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons. Installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Based on the study this case scenario, the General Population/Uncontrolled Exposure and the minimum recommended distance is around 20cm (8 inches) from the antenna. Jose Aguirre Cisco Systems Inc Corporate Compliance and Certifications 125 West Tasman Drive San Jose, CA 95134 Email: [email protected] EDCS#: 1297610 2.0 EUT Description. 2.4GHz WLAN Radio PCIe card, 802.11 b/g P/N: 73-15453-03 3.0 Methodology All calculations were made in accordance with ANSI C95.1, and FCC OET 65C. 4.0 Technical Requirements 4.1 Single Band Operation – Limits FCC Limits for Maximum Permissible Exposure (MPE) (A) Limits for Occupational/Controlled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range Strength (E) Strength (H) (S) |E| 2 , |H| 2 or S (MHz) (V/m) (A/m) (mW/cm 2 ) (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f 2 )* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- f/300 6 1500-100,000 -- -- 5 6 (B) Limits for General Population/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time EDCS#: 1297610 Range Strength (E) Strength (H) (S) |E| 2 , |H| 2 or S (MHz) (V/m) (A/m) (mW/cm 2 ) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/1500 30 1500-100,000 -- -- 1.0 30 f = frequency in MHz *Plane-wave equivalent power density NOTE 1: See Section 1 for discussion of exposure categories. NOTE 2: The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source-based time-averaging requirements for mobile and portable transmitters. 5.0 Calculations The Power Density (mW/cm2) is calculated as follows: S = PG(Duty Cycle) / 4πR 2 (Equation 1) Solve for R R= sqrt ( !"!"#$ !"!#$ !" ! ) (Equation 2) Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) 6.0 Results Test Reports used in evaluation are : 2.4GHz WLAN Radio PCIe card, 802.11 b/g M/N: 73-15453-03 WLAN report : EDCS# 1261389 EDCS#: 1297610 EDCS#: 1297610 S=1mW/cm^2 maximum. The highest supported antenna gain is 3.4 dBi. Using the peak power levels recorded in the test report along with Equation 2 above, the MPE distances are calculated as follows. Frequency (MHz) Bit Rate (Mbps) Power Density (mW/cm^2) Peak Transmit Power (dBm) Antenna Gain (dBi) MPE Distance (cm) Limit (cm) Margin (cm) 24121113.13.41.882018.12 24371113.13.41.882018.12 24621113.03.41.862018.14 24126110.43.41.372018.63 24376112.93.41.842018.16 2462619.83.41.292018.71 Note: power levels taken from EDCS - 1261389 MPE Calculations To maintain compliance, installations will assure a separation distance of at least 20cm. Using Equation 1, the MPE levels (s) at 20 cm are calculated as follows: Frequency (MHz) Bit Rate (Mbps) MPE Distance (cm) Peak Transmit Power (dBm) Antenna Gain (dBi) Power Density (mW/cm^2) Limit (mW/cm^2) Margin (mW/cm^2) 241212013.13.40.0110.99 243712013.13.40.0110.99 246212013.03.40.0110.99 241262010.43.40.0011.00 243762012.93.40.0110.99 24626209.83.40.0011.00 The calculation is for General Population/Uncontrolled exposure. The minimum distance recommended is 20cm (8 inches). EDCS#: 1297610 References American National Standards Institute (ANSI), "Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz," ANSI/IEEE C95.1-1992 (previously issued as IEEE C95.1-1991). Copyright 1992 by the Institute of Electrical and Electronics Engineers, Inc. (IEEE), New York, N.Y. 10017. For copies contact the IEEE: 1-800-678-4333 or 1-908-981-1393. American National Standards Institute (ANSI), "Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields - RF and Microwave”. ANSI/IEEE C95.3- 1992. Copyright 1992, The Institute of Electrical and Electronics Engineers, Inc. (IEE…

Text truncated - open the document above for the full version.

Radio Intentional Test Report No: EDCS - 1261389 FCC ID: LDKAGORA0916 IC ID : 2461B-AGORA0916 Page No: 1 of 64 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Radio Intentional EMC Test Report: EDCS - 1261389 For 2.4GHz WLAN Radio 802.1 b/g M/N : 73-15453-03 To be installed in Cisco ASR 901S Series Aggregation Services Routers Against the following Specifications : 47 CFR 15.247 RSS-210 RSS-102 Cisco Systems EMC Laboratory 170 West Tasman Drive San Jose, CA 95134 Testing - Certificate Number : 1178-01 Author: Jose Aguirre Approved By: Dilip Patel Title: Manager This report replaces any previously entered test report under EDCS - 1261389 Radio Intentional Test Report No: EDCS - 1261389 FCC ID: LDKAGORA0916 IC ID : 2461B-AGORA0916 Page No: 2 of 64 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Radio Intentional Test Report No: EDCS - 1261389 FCC ID: LDKAGORA0916 IC ID : 2461B-AGORA0916 Page No: 3 of 64 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential This test report has been electronically authorized and archived using the CISCO Engineering Document Control system. SECTION 1: OVERVIEW .......................................................................................................................................... 4 TEST SUMMARY ......................................................................................................................................................... 4 2.3 REPORT ISSUE DATE ............................................................................................................................................ 6 2.4 TESTING FACILITIES ............................................................................................................................................. 6 2.6 EUT DESCRIPTION ............................................................................................................................................... 7 2.7 SCOPE OF ASSESSMENT ........................................................................................................................................ 7 2.8 UNITS OF MEASUREMENT .................................................................................................................................... 7 2.9 REPORT TEMPLATE CONTROL NO. ....................................................................................................................... 8 SECTION 3: RESULT SUMMARY ......................................................................................................................... 9 3.1 RESULTS SUMMARY TABLE ................................................................................................................................. 9 SECTION 4: SAMPLE DETAILS ........................................................................................................................... 11 4.1 SAMPLE DETAILS ............................................................................................................................................... 11 4.2 SYSTEM DETAILS ............................................................................................................................................... 11 4.3 MODE OF OPERATION DETAILS ................................................................…

Text truncated - open the document above for the full version.