LDKDX6500736CP-DX650

Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Regulatory Compliance and Safety Information for Cisco Desktop Collaboration Experience This document provides international agency compliance, safety, and statutory information for Cisco Desktop Collaboration Experience phones. Contents This document contains the following sections: •Translated Safety Warnings, page 2 •Japanese Electric Appliance and Radio Laws, page 26 •Cell Phone Interference Caution, page 26 •Using External Devices with Your Cisco Desktop Collaboration Experience Phone, page 27 •European Directives, page 27 •Compliance and Safety Information, page 30 •Obtaining Documentation and Submitting a Service Request, page 38 2 Regulatory Compliance and Safety Information for Cisco Desktop Collaboration Experience OL-28934-01 Translated Safety Warnings This section repeats in multiple languages the basic warnings appropriate for Cisco Desktop Collaboration Experience phones. Statement 1071—Warning Definition WarningIMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken. Voordat u aan enige apparatuur gaat werken, dient u zich bewust te zijn van de bij elektrische schakelingen betrokken risico's en dient u op de hoogte te zijn van de standaard praktijken om ongelukken te voorkomen. Gebruik het nummer van de verklaring onderaan de waarschuwing als u een vertaling van de waarschuwing die bij het apparaat wordt geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES Varoitus TÄRKEITÄ TURVALLISUUSOHJEITA Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET Attention IMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents. Pour prendre connaissance des traductions des avertissements figurant dans les consignes de sécurité traduites qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS 3 Regulatory Compliance and Safety Information for Cisco Desktop Collaboration Experience OL-28934-01 Warnung WICHTIGE SICHERHEITSHINWEISE Dieses Warnsymbol bedeutet Gefahr. Sie befinden sich in einer Situation, die zu Verletzungen führen kann. Machen Sie sich vor der Arbeit mit Geräten mit den Gefahren elektrischer Schaltungen und den üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Avvertenza IMPORTANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qualsiasi apparecchiatura, occorre essere al corrente dei pericoli relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person. Før du begynner å arbeide med noe av utstyret, må du være oppmerksom på farene forbundet med elektriske kretser, og kjenne til standardprosedyrer for å forhindre ulykker. Bruk nummeret i slutten av hver advarsel for å finne oversettelsen i de oversatte sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE Aviso INSTRUÇÕES IMPORTANTES DE SEGURANÇA Este símbolo de aviso significa perigo. Você está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conhecimento dos perigos envolvidos no manuseio de circuitos elétricos e familiarize-se com as práticas habituais de prevenção de acidentes. Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES ¡Advertencia! INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo. GUARDE ESTAS INSTRUCCIONES 4 Regulatory Compliance and Safety Information for Cisco Desktop Collaboration Experience OL-28934-01 Varning! VIKTIGA SÄKERHETSANVISNINGAR Denna varningssignal signalerar fara. Du befinner dig i en situation som kan leda t…

Text truncated - open the document above for the full version.

Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1) First Published: February15, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-28931-01 THE SPECIFICATIONSAND INFORMATION REGARDINGTHE PRODUCTSIN THIS MANUALARE SUBJECTTO CHANGEWITHOUTNOTICE.ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONSIN THIS MANUALARE BELIEVEDTO BE ACCURATE BUT ARE PRESENTEDWITHOUTWARRANTYOF ANY KIND, EXPRESSOR IMPLIED.USERSMUSTTAKE FULL RESPONSIBILITYFOR THEIRAPPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSEAND LIMITEDWARRANTYFOR THE ACCOMPANYINGPRODUCTARE SET FORTH IN THE INFORMATION PACKETTHAT SHIPPEDWITH THE PRODUCTAND ARE INCORPORATED HEREINBY THIS REFERENCE.IF YOU ARE UNABLETO LOCATE THE SOFTWARE LICENSEOR LIMITEDWARRANTY, CONTACT YOURCISCOREPRESENTATIVE FOR A COPY. The followinginformationis for FCC complianceof Class A devices:This equipmenthas been tested and found to complywith the limits for a Class A digital device,pursuantto part 15 of the FCC rules. These limits are designedto providereasonableprotectionagainstharmfulinterferencewhen the equipmentis operatedin a commercialenvironment.This equipment generates,uses, and can radiateradio-frequencyenergy and, if not installedand used in accordancewith the instructionmanual,may cause harmfulinterferenceto radio communications. Operationof this equipmentin a residentialarea is likely to cause harmfulinterference,in which case users will be requiredto correctthe interferenceat their own expense. The followinginformationis for FCC complianceof Class B devices:This equipmenthas been tested and found to complywith the limits for a Class B digital device,pursuantto part 15 of the FCC rules. These limits are designedto providereasonableprotectionagainstharmfulinterferencein a residentialinstallation.This equipmentgenerates,uses and can radiateradio frequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterference will not occur in a particularinstallation.If the equipmentcauses interferenceto radio or televisionreception,which can be determinedby turningthe equipmentoff and on, users are encouragedto try to correctthe interferenceby using one or more of the followingmeasures: • Reorientor relocatethe receivingantenna. • Increasethe separationbetweenthe equipmentand receiver. • Connectthe equipmentinto an outlet on a circuit different from that to which the receiveris connected. • Consultthe dealer or an experiencedradio/TVtechnicianfor help. Modificationsto this productnot authorizedby Cisco could void the FCC approvaland negate your authorityto operatethe product The Cisco implementationof TCP headercompressionis an adaptationof a programdevelopedby the Universityof California,Berkeley(UCB)as part of UCB’s public domainversion of the UNIX operatingsystem.All rights reserved.Copyright © 1981, Regentsof the Universityof California. NOTWITHSTANDINGANYOTHERWARRANTYHEREIN,ALLDOCUMENTFILESANDSOFTWAREOFTHESESUPPLIERSAREPROVIDED"ASIS"WITHALLFAULTS. CISCOAND THE ABOVE-NAMEDSUPPLIERSDISCLAIMALL WARRANTIES,EXPRESSEDOR IMPLIED,INCLUDING,WITHOUTLIMITATION, THOSEOF MERCHANTABILITY,FITNESSFORAPARTICULARPURPOSEANDNONINFRINGEMENTORARISINGFROMACOURSEOFDEALING,USAGE,ORTRADEPRACTICE. IN NO EVENTSHALLCISCOOR ITS SUPPLIERSBE LIABLEFOR ANY INDIRECT, SPECIAL,CONSEQUENTIAL,OR INCIDENTAL DAMAGES,INCLUDING,WITHOUT LIMITATION, LOST PROFITSOR LOSS OR DAMAGETO DATA ARISINGOUT OF THE USE OR INABILITYTO USE THIS MANUAL,EVENIF CISCOOR ITS SUPPLIERS HAVE BEEN ADVISEDOF THE POSSIBILITYOF SUCHDAMAGES. Cisco and the Cisco logo are trademarksor registeredtrademarksof Cisco and/or its affiliatesin the U.S. and other countries.To view a list of Cisco trademarks,go to this URL:http:// www.cisco.com/go/trademarks. Third-partytrademarksmentionedare the propertyof their respectiveowners.The use of the word partnerdoes not imply a partnership relationshipbetweenCisco and any other company. (1110R) AnyInternetProtocol(IP)addressesusedinthisdocumentarenotintendedtobeactualaddresses.Anyexamples,commanddisplayoutput,andfiguresincludedinthedocumentareshown for illustrativepurposesonly. Any use of actual IP addressesin illustrativecontentis unintentionaland coincidental. Cisco and the Cisco logo are trademarksor registeredtrademarksof Cisco and/or its affiliatesin the U.S. and other countries.To view a list of Cisco trademarks,go to this URL:http:// www.cisco.com/go/trademarks. Third-partytrademarksmentionedare the propertyof their respectiveowners.The use of the word partnerdoes not imply a partnership relationshipbetweenCisco and any other company. (1110R) The Bluetoothword mark and logo are registeredtrademarksownedby BluetoothSIG, Inc., and any use of such marks by Cisco Systems,Inc., is under license. Google,GooglePlay, Androidand certainother marks are trademarksof GoogleInc. © 2013 Cisco Systems,Inc. All rights reserved. CONTENTS CHAPTER 1 Preface1 Guide organization1 Relateddocumentation1 Additionalinformation2 Obtainingdocumentationand submittingservicerequest2 CHAPTER 2 Phonefeatures3 Buttonsand hardware3 Cisco DesktopCollaborationExperienceDX650buttonsand hardware3 Phone cable installation5 Hookswitchclip removal5 TAPS registration6 Handset6 Headset6 Headsetsupport7 Audio quality7 3.5 mm headsets7 Wireless headset7 Speakerphone8 AutoAnswerwith headsetor speakerphone8 Phone cable lock9 Line and call definitions9 Line and call icons9 Energy savings10 Android10 Gestures11 Lock screen11 Unlockscreen12 Cisco Desktop Collaboration Experience DX600 Series User Guide, Release 10.0(1) OL-28931-01iii Place emergency call from Lock screen12 Add PIN12 Add password12 Reset lost PIN or password13 Awake to Phone application13 Cisco ExtensionMobility14 Sign In to ExtensionMobilityfrom Lock screen14 Sign in to ExtensionMobilityfrom Settings15 Sign Out …

Text truncated - open the document above for the full version.

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com March 11, 2013 Federal Communications Commission Authorization and Evaluation Division Equipment authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: We, the undersigned, hereby authorize American Certification Body, Inc. (ACB) to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by American Certification Body, Inc. (ACB) on our behalf shall have the same effect as acts of our own. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b) to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you. Best Regards, Kenny Wee Manager, Engineering Cisco Systems, Inc.

Phillip Carranco EMC Compliance Engineer Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 Phone: (330) 523-2094 Fax: (330) 523-2002 E-Mail: [email protected] April 26, 2013 Re: FCC ID: LDKDX6500736 Applicant: Cisco Systems Inc Re: KDB 594280 Our phones have a framework based on certificates that prevent any images that are not explicitly signed by Cisco from being executed. The ability of creating a signed image is not provided to any third party and it is restricted to Cisco development, and therefore end users have no ability to change the code in our radios. We comply with KDB 594280 Guidelines. Best Regards, Phillip Carranco EMC Compliance Engineer

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-­‐1706 Phone 408 526-­‐4000 Fax: 408 526 –4100 http://www.cisco.com March 13, 2013 Federal Communications Commission Office of Engineering and Technology Equipment Authorization division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality request for FCC ID LDKDX6500736 and IC ID 2461B-DX6500736 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that apart of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term n Permanent Block Diagrams n Short Term Permanent 1 Internal Photos Short Term n Permanent Operation Description/Theory of Operation Short Term n Permanent Parts List & Placement/BOM Short Term n Permanent Tune-Up Procedure Short Term n Permanent Schematics n Short Term Permanent* User’s Manual Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of _45 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, Kenny Wee Manager, Engineering Cisco Systems, Inc.

Dimensions are shown in imperial (metric) Tolerances unless otherwise specified are: Dimensions Tolerance: P2C Tolerance: ± 0.25mm” ± 0.25mm” SCALE:1:1 SHEET:1 of 1 UNIT: INCHES ORIGINATIONDATECHECK BYDATE Rev.DescriptionECN Chan S. WM REF. No. Red Line is cut line LABEL FINISHED COPY: NOTES: A) Material 339-J1 (Worldmark) Mat Ref: Ribbon: LABELS/TILE: TILES/PACK: LABELS/PACK: Matrix Strip:YN B) COLORSC) FONTS 1)1) 2) 2) 3) 4) 5) 6) 7) 8) 3) 4) 5) 6) 7) 8) Grey graphics(matches DPW7424) Custom Black background Vanish Title:________________________________Date:______________ Approved By:___________________________________________ DELIVERY TIME CAN ONLY BE MET WITH YOUR COOPERATION. PLEASE ENSURE THE ARTWORK PROOF IS CHECKED CAREFULLY FOR LAYOUT, WORDING, SPELLING, SIZE, COLOR, ETC., THEN, RETURNED WITHIN 24 HOURS, TO ENSURE DELIVERY SCHEDULES ARE MET. THE COLORS DISPLAYED ON THIS PROOF MAY NOT BE ACCURATE; REFER TO PMS OR CISCO COLOR BOOK REFERENCES STATED FOR TRUE REPRESENTATION. IMPORTANT DWG/PN: See where specified AW: See where specified CUST. NAME: Tony ARTWORK PROOF:#2 02/13/12 DWG: 47-25533-01 Rev.01 AW:56-19461-01 Rev.01(Agency,lbl,Bourdon) Pre-printed label LINER WEBB WIDTH PERFORATION LINE BETWEEN LABEL SET. 52.00mm 44mm 21.824mm 73.5mm R 0.95mm 78.58mm 2.56mm(2X) LABEL COME OFF THIS WAY KISSCUT LINE Please provide the Cert# DYNAMIC PRINT DATE HERE (YYYY/MM) 003XXXXXXX 003XXXXXXX 003XXXXXXX Japan htt://cisco-returns.comMfg Date(Date de fabrication): MM/YYYY Product Name (产品名称 /Nom Du Produit ) : Model ( /modèle ) : CP-DX650 UC Phone ( UC 电话 ) Power input( 输/Alimentation Entrée ) 48 --- 0.38A(0,38A) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Manufacturer (制造商/Fabricant ) :Cisco Systems,Inc. FCC ID: LDKDX6500736 CANADA IC:2461B-DX6500736 R R T

Cisco Systems Inc EDCS # EDCS - 1229019 Model Number: CP-DX650-K9 series This report shall not be reproduced except in full without written permission by Cisco Systems Inc 1. Engineering Analysis per FCC 2.1093 Industry Canada RSS-102 Australian ARPANSA Requirements New Zealand Regulations For CP-DX650 Wireless IP Phone with Bluetooth ver 2.1 + EDR Prepared By: Phillip Carranco Cisco Systems Inc 170 West Tasman San Jose, CA 95134 USA Cisco Systems Inc EDCS # EDCS - 1229019 Model Number: CP-DX650-K9 series This report shall not be reproduced except in full without written permission by Cisco Systems Inc 2. 01/31/2013 1.0: Attestation Statement of Compliance The Cisco Systems Inc CP-DX650 Series Wireless IP Phone with Bluetooth Ver 2.1+EDR has been evaluated for Maximum Permissible Exposure in compliance with 47 Code of Federal Regulations 2.1093. The evaluation was in accordance with methodology as referenced in FCC Bulletin OET 65C (rev 01-01) This report serves as the technical analysis of Cisco of the radios in the CP-DX650 series. The technical information referenced for this study was derived from the FCC / Canada test report on the product. For purposes of this study, the evaluation was only done with the worse case antennae for each programmable power level. The limits used for this evaluation are in line with the recommendations of the World Health Organizations (WHO) International Committee on Non Ionizing Radiation Protection (ICNIRP) as well as the American National Standards Institute (ANSI) C95.1. This analysis also complies with the requirements stated in Industry Canada RSS-102 as well as the applicable Australian and New Zealand regulations. _______________________________________________ Phillip Carranco Compliance Engineer Cisco Systems Inc 170 W Tasman Dr San Jose, CA 93727 Phone: 408.527.9787 Email: [email protected] Cisco Systems Inc EDCS # EDCS - 1229019 Model Number: CP-DX650-K9 series This report shall not be reproduced except in full without written permission by Cisco Systems Inc 3. 2.0 EUT Description This is a Cisco Wireless IP Phone with Bluetooth Ver. 2.1 + EDR contains both an 802.11a/b/g/n radio and an 802.15 Bluetooth Ver. 2.1 + EDR Radio. 3.0 Methodology All calculations were made in accordance with ANSI C95.1, and FCC OET 65C. 4.0 Technical Requirements 4.1 Single Band Operation – Limits As referenced by OET 65C / RSS-102 (B) Limits for General Population/Uncontrolled Exposure Frequency Electric Field Magnetic Field Power Density Averaging Time Range Strength (E) Strength (H) (S) |E| 2 , |H| 2 or S (MHz) (V/m) (A/m) (mW/cm 2 ) (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 -- -- f/1500 30 1500-100,000 -- -- 1.0 30 f = frequency in MHz *Plane-wave equivalent power density NOTE 1: See Section 1 for discussion of exposure categories. NOTE 2: The averaging time for General Population/Uncontrolled exposure to fixed transmitters is not applicable for mobile and portable transmitters. See 47 CFR §§2.1091 and 2.1093 on source- based time-averaging requirements for mobile and portable transmitters. Cisco Systems Inc EDCS # EDCS - 1229019 Model Number: CP-DX650-K9 series This report shall not be reproduced except in full without written permission by Cisco Systems Inc 4. Excerpt from Australian Radiation Protection Standard REFERENCE LEVELS FOR TIME AVERAGED EXPOSURE TO RMS ELECTRIC AND MAGNETIC FIELDS (UNPERTURBED FIELDS) Exposure category Frequency range E-field strength (V/m rms) H-field strength (A/m rms) Equivalent plane wave power flux density Seq (W/m2) Occupational 100 kHz – 1 MHz 614 1.63 / f — 1 MHz – 10 MHz 614 / f 1.63 / f 1000 / f 2 (see note 5) 10 MHz – 400 MHz 61.4 0.163 10 (see note 5) 400 MHz – 2 GHz 3.07 × f 0.5 0.00814 × f 0.5 f/ 40 2 GHz – 300 GHz 137 0.364 50 General public 100 kHz – 150 kHz 86.8 4.86 — 150 kHz – 1 MHz 86.8 0.729 / f — 1 MHz – 10 MHz 86.8 / f 0.5 0.729 / f — 10 MHz – 400 MHz 27.4 0.0729 2 (see note 6) 400 MHz – 2 GHz 1.37 × f 0.5 0.00364 × f 0.5 f / 200 2 GHz – 300 GHz 61.4 0.163 10 5.0 Calculations The Power Density (mW/cm2) is calculated as follows: S = PG(Duty Cycle) / 4πR 2 Where: S = power density (in appropriate units, e.g. mW/cm2) P = power input to the antenna (in appropriate units, e.g., mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (appropriate units, e.g., cm) Cisco Systems Inc EDCS # EDCS - 1229019 Model Number: CP-DX650-K9 series This report shall not be reproduced except in full without written permission by Cisco Systems Inc 5. 6.0 Results Tx Fr e que nc y (MHz) MPE Distance (cm) Filter /Cable Loss dB Peak Tx Power (dBm) Effective power (dBm) Radio Power (mW) Ant Gain (dBi) Ant Gain (mW eq) Duty Cycle Power Density (mW/cm^2) Limit (mW/cm^2) % of Std Tx1 2412-247220015.5615.5635.9754.32.69210.0190.440.044 Tx2 2402-24802009.129.128.1664.32.69210.0040.430.010 Tx3 5150-5250 20014.7614.7629.9232.41.73810.0100.8550.012 Tx3 5250-5350 20014.2914.2926.8533.92.45510.0130.8550.015 Tx3 5470-5735 20015.3215.3234.0413.82.39910.0160.8550.019 Tx3 5745-5825 20015.0415.0431.9153.32.13810.0140.8550.016 Calculations with additional transmitters The Bluetooth radio operates in either the 2.4GHz or 5GHz Band but not both at same time. Scenario 1 : Bluetooth and 2.4GHz Radio Tx1Tx2Tx3% of Standard 0.0440.0100.054 D (estimate) = 20* D=4.648cm % Scenario 1 : Bluetooth and 5GHz Radio Tx1Tx2Tx3% of Standard 00.010.0190.029 D (estimate) = 20* D=3.406cm %

Radio Intentional Test Report No: EDCS - 1206158 FCC ID: LDKDX6500736 Page No: 1 of 104 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Radio Intentional EMC Test Report: EDCS - 1206158 For CP-DX650 2.4GHz Radio Against the following Specifications : 47 CFR 15.247 RSS-210 RSS-102 Cisco Systems EMC Laboratory 170 West Tasman Drive San Jose, CA 95134 Author: Phillip Carranco Approved By: Dilip Patel Title: Regulatory Compliance Manager This report replaces any previously entered test report under EDCS - 1206158 Radio Intentional Test Report No: EDCS - 1206158 FCC ID: LDKDX6500736 Page No: 2 of 104 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential This test report has been electronically authorized and archived using the CISCO Engineering Document Control system. SECTION 1: OVERVIEW .......................................................................................................................................... 3 TEST SUMMARY .......................................................................................................................................................... 3 2.3 REPORT ISSUE DATE ............................................................................................................................................. 5 2.4 TESTING FACILITIES .............................................................................................................................................. 5 2.6 EUT DESCRIPTION ................................................................................................................................................ 6 2.7 SCOPE OF ASSESSMENT ......................................................................................................................................... 6 2.8 UNITS OF MEASUREMENT ..................................................................................................................................... 6 2.9 REPORT TEMPLATE CONTROL NO. ....................................................................................................................... 7 EDCS#: 703456 ......................................................................................................................................................... 7 SECTION 3: RESULT SUMMARY .......................................................................................................................... 7 3.1 RESULTS SUMMARY TABLE .................................................................................................................................. 7 SECTION 4: SAMPLE DETAILS .............................................................................................................................. 8 4.1 SAMPLE DETAILS .................................................................................................................................................. 8 4.2 SYSTEM DETAILS .................................................................................................................................................. 8 4.3 MODE OF OPERATION DETAILS ............................................................................................................................ 8 SECTION 5: MODIFICATIONS ................................................................................................................................ 8 5.1 SAMPLE MODIFICATIONS PERFORMED DURING ASSESSMENT .............................................................................. 8 APPENDIX A: FORMAL TEST RESULTS ....................................................................................................... 9 6 DB BANDWIDTH ....................................................................................................................................................... 9 PEAK OUTPUT POWER .............................................................................................................................................. 23 POWER SPECTRAL DENSITY ...................................................................................................................................... 31 CONDUCTED SPURIOUS EMISSIONS ........................................................................................................................... 38 CONDUCTED BAND EDGE MEASUREMENTS ............................................................................................................. 46 RADIATED SPURIOUS AND HARMONICS EMISSIONS ................................................................................................. 60 RADIATED RECEIVER SPURIOUS MEASUREMENTS ................................................................................................... 86 CO-LOCATOR RADIATED SPURIOUS EMISSIONS ....................................................................................................... 88 APPENDIX B: ABBREVIATION KEY AND DEFINITIONS ..................................................................... 102 APPENDIX C: TEST EQUIPMENT USED TO PERFORM THE TEST ................................................... 103 APPENDIX D: TEST PROCEDURES ............................................................................................................ 104 Radio Intentional Test Report No: EDCS - 1206158 FCC ID: LDKDX6500736 Page No: 3 of 104 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Section 1: Overview Test Summary The samples were assessed against the tests detailed in section 3 under the requirements of the following standards: Emissions: CFR47 Part 15.247 RSS-210 RSS102 Notes: 1) Measurements were made in accordance with ET docket 96-8, KDB Publication No. 558074& measurement method of spuri…

Text truncated - open the document above for the full version.

Radio Intentional Test Report No: EDCS - 1206158 FCC ID: LDKDX6500736 Page No: 53 of 104 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Marker-Delta Measurements: Radiated Graph Results for 2462MHz Average (HT-20): Radiated Graph Results for 2462MHz Peak (HT-20): Radio Intentional Test Report No: EDCS - 1206158 FCC ID: LDKDX6500736 Page No: 54 of 104 This document is uncontrolled. Please refer to the electronic copy within EDCS for the most up to date version. Cisco Systems, Inc. Company Confidential Conducted Graph Results for 2462MHz (HT-20): Radiated Graph Results for 2422MHz Average (HT-40) Radio Intentional Test Report No: EDCS - 1206158 FCC ID: LDKDX6500736 Page No: 55 of 104 This document is uncontrolled. Please refer t…

Text truncated - open the document above for the full version.