LDKTG2050802.11 a/b/g/n AP Module

Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Cisco Wireless ISR and HWIC Access Point Configuration Guide December 2006 Text Part Number: 0L-6415-04 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCVP, the Cisco Logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0612R) Cisco Wireless ISR and HWIC Access Point Configuration Guide Copyright © 2006 Cisco Systems, Inc. All rights reserved. 3 Cisco Wireless Router and HWIC Configuration Guide OL-6415-04 CONTENTS Preface 9 Audience 9 Purpose 9 Organization 10 Conventions 10 Related Publications 12 Obtaining Documentation 13 Cisco.com 13 Product Documentation DVD 14 Ordering Documentation 14 Documentation Feedback 14 Cisco Product Security Overview 15 Reporting Security Problems in Cisco Products 15 Obtaining Technical Assistance 16 Cisco Technical Support & Documentation Website 16 Submitting a Service Request 16 Definitions of Service Request Severity 17 Obtaining Additional Publications and Information 17 CHAPTER 1Overview 1 Wireless Device Management 1 Network Configuration Example 2 Root Unit on a Wired LAN 2 Features 3 5 CHAPTER 2Configuring Radio Settings 1 Enabling the Radio Interface 2 Roles in Radio Network 2 Configuring Network or Fallback Role 3 Bridge Features Not Supported 4 Sample Bridging Configuration 4 Universal Client Mode 7 Contents 4 Cisco Wireless Router and HWIC Configuration Guide OL-6415-04 Configuring Universal Client Mode 7 Configuring Radio Data Rates 10 Configuring Radio Transmit Power 12 Limiting the Power Level for Associated Client Devices 13 Configuring Radio Channel Settings 14 DFS Automatically Enabled on Some 5-GHz Radio Channels 19 Enabling and Disabling World Mode 20 Enabling and Disabling Short Radio Preambles 21 Configuring Transmit and Receive Antennas 22 Disabling and Enabling Access Point Extensions 23 Configuring the Ethernet Encapsulation Transformation Method 23 Enabling and Disabling Reliable Multicast to Workgroup Bridges 24 Enabling and Disabling Public Secure Packet Forwarding 25 Configuring Protected Ports 26 Configuring Beacon Period and DTIM 26 Configuring RTS Threshold and Retries 27 Configuring Maximum Data Retries 27 Configuring Fragmentation Threshold 28 Enabling Short Slot Time for 802.11g Radios 28 Performing a Carrier Busy Test 29 CHAPTER 3Configuring Multiple SSIDs 1 Understanding Multiple SSIDs 2 SSID Configuration Methods Supported by Cisco IOS Releases 2 Configuring Multiple SSIDs 3 Creating an SSID Globally 3 Using a RADIUS Server to Restrict SSIDs 5 Configuring Multiple Basic SSIDs 6 Requirements for Configuring Multiple BSSIDs 6 Guidelines for Using Multiple BSSIDs 6 Enabling MBSSID and SSIDL at the same time 7 Sample Configuration for Enabling MBSSID and SSIDL 8 CHAPTER 4Configuring an Access Point as a Local Authenticator 1 Understand Local Authentication 2 Configure a Local Authenticator 2 Guidelines for Local Authenticators 3 Contents 5 Cisco Wireless Router and HWIC Configuration Guide OL-6415-04 Configuration Overview 3 Configuring the Local Authenticator Access Point 3 Configuring Other Access Points to Use the Local Authenticator 8 Configurin…

Text truncated - open the document above for the full version.

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide Text Part Number: OL-16193-07 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY. The following information is for FCC compliance of Class A devices: This equipment has been tested and found to comply with the l im i t s for a C l a ss A d ig i tal d e v ic e , p urs u a nt to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco’s installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications in part 15 of the FCC rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. Modifying the equipment without Cisco’s written authorization may result in the equipment no longer complying with FCC requirements for Class A or Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense. You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: • Turn the television or radio antenna until the interference stops. • Move the equipment to one side or the other of the television or radio. • Move the equipment farther away from the television or radio. • Plug the equipment into an outlet that is on a different circuit from the television or radio. (That is, make certain the equipment and the television or radio are on circuits controlled by different circuit breakers or fuses.) Modifications to this product not authorized by Cisco Systems, Inc. could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE. IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide © 2012 Cisco Systems, Inc. All rights reserved. iii Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-07 Preface This preface describes the objectives, audience, organization, and conventions of this guide, and describes related documents that have additional information. It contains the following sections: •Objective, page iii •Audience, page iii •Organization, page iv •Conventions, page iv •Related Documentation, page…

Text truncated - open the document above for the full version.

CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONDATEECO APPROVE MECH MFG A0 PRODUCTION RELASE.02/27/12 E107931 LT RD B0 CHASSIS BASE ADDS SIM COVER CUTOUT04/12/12E109483 LT RD SHT 1 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D REFDWG, TOP, 892, 896, 897, INCEPTION 02/13/12MFG R.DUZAC THIRD ANGLE PROJECTION 02/14/12ENG L.TINT UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES: TOLERANCES: .XX .01 .XXX .005 ANGLES: 1 02/14/12DES L.TINT DATEAPPROVAL THIS DRAWING CONTAINS INFORMATION WHICH IS THE PROPRIETARY PROPERTY OF CISCO SYSTEMS. THIS DRAWING IS CONFIDENTIAL AND ITS CONTENTS MAY NOT BE DISCLOSED WITHOUT PRIOR WRITTEN CONSENT OF CISCO SYSTEMS. MATERIAL: FINISH: 7$%/( 6.8(6 TAN MOTHEBOARD ASSEMBLY MOTHERBOARD VDSL/SHDSL CARD TOP GUN 2 WiFi CARD 892FSP-­K9800-­37585-­XX 74-­10062-­XXN/AN/A N/A 896VA-­K9 800-­37119-­XX 74-­10084-­XX 74-­10060-­XX 74-­7913-­XX N/A 897VA-­K9 800-­37120-­XX 74-­10087-­XX74-­7912-­XXN/A 897VA-­M-­K9 800-­37121-­XX 74-­10085-­XX 74-­10135-­XX 74-­7914-­XXN/A 897VAW-­A-­K9 800-­37123-­XX 74-­10088-­XX 74-­10061-­XX 74-­7912-­XX 74-­8619-­XX 897VAW-­E-­K9 897VAM-­W-­E-­9 800-­37125-­XX 74-­10090-­XX74-­7914-­XX NOTES: (UNLESS OTHERWISE SPECIFIED) 1. THIS IS A COMPUTER GENERATED DOCUMENT. ALL CHANGES MUST BE MADE IN THE MASTER DATABASE ONLY. 2. SHALL MEET MECHANICAL ACCEPTANCE SPEC: 95-­0669-­XX 3 REMOVE TE TOP COVER. PLACE THE ITEM 15 AT THE TICK MARKED LOCATION. DRY SURFACE SHOULD BE FAR SIDE. 4 INSTALL THE MOTHERBOARD ASSEMBLY. DSL CARDS WILL VARY BASED ON THE MB CONFIGURATION, SEE TABLE 1 IN DETAIL. PLACE THE ITEM 16 THERMAL PAD AND DRY SURFACE SHOULD BE NEAR SIDE FOR VDSL. 5 SECURE THE MOTHER BOARD WITH ITEM 3 IN SEQUENCE (A) FIRST, (B) SECOND. INSTALL THE HEAT SINK ITEM 13 WITH TWO M3 SCREWS IN SEQUENCE (C). THEN THE REST OF ITEM (3) TO SECURE. 6 TORQUE 6.0-­8.0 +/-­ 0.5 IN-­LBS TORQUE. DRIVE SPEED NOT TO EXCEED 550 RPM. 7 POE CARD IS THE CUSTOMER ORDERABLE OPTION. THE INSTALLATION PROCEDURE IS: INSTALL THREE STANDOFF AND PLUG THE CARD INTO THE MOTHERBOARD AND SECURE THE CARD WITH THREE 6-­32 SCREWS. 8 (A) ROUTE AND CONNECT THREE ANTENNA WIRES T0 TOP GUN II WIFI CARD AS SHOWN IN DETAIL B IF THE CARD IS PRESENT. (B) KEEP THE WIRE STRAIGHT TO AVOID JAMMING INTO THE COVER'S HOOK. THEN INSTALL THE COVER. 9 SECURE THE COVER WITH ITEM 4 AND 5. 10 INSTALL THE SCREW IF XDSL CARD IS PRESENT. 11 INSTALL IO LABEL ITEM 10 AND BEZEL LABEL ITEM 11 ACCORDING TO TABLE 2. MAKE SURE LED HOLES ON THE BEZEL LABEL, ITEM 11 NEED TO ALIGN WITH LED HOLES ON THE BEZEL. 12 CELI AND SERIAL LABEL ARE PLACED ON THE TICK MARKS ON IO LABELS. INSTALL ITEM 12 COMPLIANCE LABEL AT THE PROVIDED TICK MARKS. 13. REFER TO 95-­9878-­XX FOR CONNECTOR COSMETIC REQUIREMENT AND 95-­2733-­XX FOR ALL OTHER COSMETIC REQUIREMENTS. 14. PRODUCT MUST CONFORM TO THE CISCO SYSTEMS PRODUCT WORKMANSHIP REQUIREMENTS SPEC: 95-­5981-­XX 15 16 TOP GUN 2 (WiFi) CARD 4 VDSL CARD 4 7 8 3 X12 4 (A) 3 (B) 4 5 6 4 5 6 (C) 13 CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONECO APPROVE MECH MFG SEE SHEET 1 SHT 2 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D ITEM QTY DESCRIPTION P/N 901 1 POE PCBA74-­7721-­XX 902 2 STANDOFF50-­1807-­XX 903 3 SCREW48-­0421-­XX 904 1 STANDOFF50-­1700-­XX 32(,167$//$7,21,)25'(5(' POE MODULE BOM 800-­IL-­PM-­4 903 901 902 X3 7 7 904 7 CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONECO APPROVE MECH MFG SEE SHEET 1 SHT 3 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D 1 2 3 3X 8A SEE DETAIL A DETAIL A SCALE 3/2    SCALE 1/1 8B CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONECO APPROVE MECH MFG SEE SHEET 1 SHT 4 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D 5 4 X4 6 9 6 9 3 6 10 CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONECO APPROVE MECH MFG SEE SHEET 1 SHT 5 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D 7$%/( 6.8(6 TAN IO LABELS BEZEL LABELS 892FSP-­K9 800-­37585-­01 47-­24422-­XX 47-­24442-­XX 896VA-­K9 800-­37119-­XX 47-­24417-­XX 47-­24430-­XX 897VA-­K9 800-­37120-­XX 47-­24418-­XX 897VA-­M-­K9 800-­37121-­XX 47-­24420-­XX 47-­24432-­XX 897VAW-­A-­K9 800-­37123-­XX 47-­24421-­XX 47-­24441-­XX 89V7VAW-­E-­K9 897VAM-­W-­E-­9 800-­37125-­XX 47-­24423-­XX 11 12 12 10 1 2 CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONECO APPROVE MECH MFG SEE SHEET 1 SHT 6 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D 11 11 SCALE 1/1 CAD TYPE: PROE 12345678 12345678 A B C D A B C D -­-­-­ REVISION -­-­-­ REVDESCRIPTIONECO APPROVE MECH MFG SEE SHEET 1 SHT 7 OF 7DO NOT SCALE DRAWINGSCALE 33/100 REV B0 DWG NO. 62-­22047-­01 SIZE D 12 12

For teleworkers, small offices, small to medium-sized businesses, and enterprise branch and head offices Cisco Router Guide Summer 2010 V.6 Cisco Router Guide Cisco Integrated Services Routers: Cisco 860, 880, 890, 1800 (fixed), 1800 (modular), 1900, 2800, 2900, 3800, 3900 Series; Cisco Aggregation Routers: Cisco 7200, 7301, 7304, ASR 1000, 7600, Catalyst 6500 Series Summer 2010 V.6 $UJHQWLQD‡$XVWUDOLD‡$XVWULD‡%HOJLXP‡%UD]LO‡%XOJDULD‡&DQDGD‡&KLOH‡&KLQD35&‡&RORPELD‡&RVWD5LFD‡&URDWLD‡&\SUXV‡&]HFK5HSXEOLF 'HQPDUN ‡ 'XEDL 8$( ‡ )LQODQG ‡ )UDQFH ‡ *HUPDQ\ ‡ *UHHFH ‡ +RQJ .RQJ 6$5 ‡ +XQJDU\ ‡ ,QGLD ‡ ,QGRQHVLD ‡ ,UHODQG ‡ ,VUDHO ‡ ,WDO\ -DSDQ ‡ .RUHD ‡ /X[HPERXUJ ‡ 0DOD\VLD ‡ 0H[LFR ‡ 7KH 1HWKHUODQGV ‡ 1HZ =HDODQG ‡ 1RUZD\ ‡ 3HUX ‡ 3KLOLSSLQHV ‡ 3RODQG ‡ 3RUWXJDO 3XHUWR 5LFR ‡ 5RPDQLD ‡ 5XVVLD ‡ 6DXGL $UDELD ‡ 6FRWODQG ‡ 6LQJDSRUH ‡ 6ORYDNLD ‡ 6ORYHQLD ‡ 6RXWK $IULFD ‡ 6SDLQ ‡ 6ZHGHQ 6ZLW]HUODQG ‡ 7DLZDQ ‡ 7KDLODQG ‡ 7XUNH\ ‡ 8NUDLQH ‡ 8QLWHG .LQJGRP ‡ 8QLWHG 6WDWHV ‡ 9HQH]XHOD ‡ 9LHWQDP ‡ =LPEDEZH &RS\ULJKW‹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isco.com Website at www.cisco.com/go/offices 7RRUGHU&LVFR&DWDO\VW6ZLWFKLQJ*XLGHJRWR www.cisco.com/go/routerguidestore This is your guide to Cisco ® Services Aggregation Routers and Cisco Integrated Services Routers, the broadest and most versatile portfolio of products for enabling the deployment of multiple advanced services. Cisco is the worldwide leader in networking systems for organizations of all sizes, offering solutions that fully support enterprise-wide deployment of networked business applications. A foundation of the Intelligent Information Network, Cisco routers provide high availability, comprehensive security, integrated wireless, ease of management, and advanced Quality of Service (QoS) for today’s most demanding network services, including IP communications, video, customer relationship management, financial transactions, and other real-time applications. This guide shows how Cisco Services Aggregation Routers and Cisco Integrated Services Routers enable you to meet your current and future needs with modular designs, allowing incremental migration as your business and network requirements change. In this guide, you can see for yourself how Cisco delivers benefits beyond basic data access, providing services such as voice, security, and wireless as part of an integrated routing system that maximizes productivity and investment protection. Cisco Router Guide For Medium-sized Businesses, Enterprise Branches, Head Offices, and the Service Provider Edge Compatibility Quick Looks Cisco Interface Card Compatibility Quick Look ............................203 Cisco Advanced Integration Module Compatibility Quick Look...........205 Cisco Port Adapter Compatibility Quick Look . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209 Cisco Shared Port Adapter Compatibility Quick Look . . . . . . . . . . . . . . . . . . . . .213 Cisco USB Flash Memory Compatibility Quick Look.......................217 Cisco Router Guide Series Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Product Transition Matrix...................................................... 13 Integrated Services Routers Cisco 860 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Cisco 880 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cisco 890 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Regulatory Compliance and Safety Information for Cisco 800 Series Routers This document provides international regulatory and safety compliance information for Cisco 800 series routers. Use this document with the other publications for the Cisco 800 series router you have purch ased. This document contains the following sections: •Product Scope, page 1 •Electromagnetic Compatibility, page 7 •EMC Class A, page 7 •Telecommunications, page 10 •Radio, page 12 •Declarations of Conformity, page 18 •CE Marking, page 18 •European Union Statements, page 19 •Environmental Compliance, page 19 •Translated Safety Warnings, page 19 •Obtaining Documentation and Submitting a Service Request, page 86 Product Scope This section describes the Cisco product models addressed in this document. Ta b le 1 indicates the product model numbers and the following additional information: •Product classification •EMC class information •Wireless standard •Option of outdoor antenna Draft - Not Final Version 2 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Product Scope Ta b l e 1Cisco Product Models Addressed in this Document Models Product Cl assificationEMC Class Wireless Standard Option of Outdoor Antenna 1.C812G+7-K9BNoneNo 2.C819G-4G-A-K9BNoneYe s 3.C819G-4G-G-K9BNoneYe s 4.C819G-4G-V-K9BNoneYe s 5.C819G+7-K9M2MBNoneNo 6.C819G-B-K9M2MBNoneNo 7.C812G-CIFI+7-E-K9B2.4 GHz, 5 GHz No 8.C812G-CIFI+7-N-K9B2.4 GHz, 5 GHz No 9.C812G-CIFI-S-A-K9B2.4 GHz, 5 GHz No 10.C812G-CIFI-V-A-K9B2.4 GHz, 5 GHz No 11.C819G-S-K9M2MBNoneNo 12.C819G-U-K9M2MBNoneNo 13.C819G-V-K9M2MBNoneNo 14.C819H-K9BNoneNo 15.C819HG-4G-A-K9BNoneYe s 16.C819HG-4G-G-K9BNoneYe s 17.C819HG-4G-V-K9BNoneYe s 18.C819HG+7-K9M2MBNoneYe s 19.C819HG-B-K9M2MBNoneYe s 20.C819HG-S-K9M2MBNoneYe s 21.C819HG-U-K9M2MBNoneYe s 22.C819HG-V-K9M2MBNoneYe s 23.C819HGW+7-A-A-K9B2.4 GHz, 5 GHz Ye s 24.C819HGW+7-E-K9B2.4 GHz, 5 GHz Ye s 25.C819HGW+7-N-K9B2.4 GHz, 5 GHz Ye s 26.C819HGW-S-A-K9B2.4 GHz, 5 GHz Ye s 27.C819HGW-V-A-K9B2.4 GHz, 5 GHz Ye s Draft - Not Final Version 3 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Product Scope 28.C819HWD-A-K9B2.4 GHz, 5 GHz Ye s 29.C819HWD-E-K9B2.4 GHz, 5 GHz Ye s 30.C866VAE-W-E-K9Multimode DSL B2.4 GHz, 5 GHz No 31.C867VAE-POE-W-A-K9Multimode DSL B2.4 GHz, 5 GHz No 32.C867VAE-W-A-K9Multimode DSL B2.4 GHz, 5 GHz No 33.C867VAE-W-E-K9Multimode DSL B2.4 GHz, 5 GHz No 34.C881-V-K9Vo i c eBNoneNo 35.C881G+7-A-K9EthernetBNoneNo 36.C881G+7-K9EthernetBNoneNo 37.C881G-B-K9EthernetBNoneNo 38.C881G-S-K9EthernetBNoneNo 39.C881G-U-K9EthernetBNoneNo 40.C881G-V-K9EthernetBNoneNo 41.C881SRST-K9EthernetBNoneNo 42.C881SRSTW-GN-A-K9EthernetB2.4 GHzNo 43.C881SRSTW-GN-E-K9EthernetB2.4 GHzNo 44.C881W-A-K9EthernetB2.4 GHzNo 45.C881W-E-K9EthernetB2.4 GHzNo 46.C881W-P-K9EthernetB2.4 GHzNo 47.C881WD-A-K9EthernetB2.4 GHz, 5 GHz No 48.C881WD-E-K9EthernetB2.4 GHz, 5 GHz No 49.C886VA-W-E-K9Multimode DSL A2.4 GHzNo 50.C886VAG+7-K9Multimode DSL ANoneNo 51.C887VA-V-K9Vo i c eANoneNo 52.C887VA-V-K9 Multimode DSL ANoneNo 53.C887VA-V-W-E-K9Multimode DSL A2.4 GHzNo Table 1Cisco Product Models Addressed in this Document Models Product ClassificationEMC Class Wireless Standard Option of Outdoor Antenna Draft - Not Final Version 4 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Product Scope 54.C887VA-W-A-K9Multimode DSL A2.4 GHzNo 55.C887VA-W-E-K9Multimode DSL A2.4 GHzNo 56.C887VA-WD-A-K9Multimode DSL A2.4 GHz, 5 GHz No 57.C887VA-WD-E-K9Multimode DSL A2.4 GHz, 5 GHz No 58.C887VAG+7-K9Multimode DSL ANoneNo 59.C887VAG-S-K9Multimode DSL ANoneNo 60.C887VAGW+7-A-K9Multimode DSL A2.4 GHz, 5 GHz No 61.C887VAGW+7-E-K9Multimode DSL A2.4 GHz, 5 GHz No 62.C887VAMG+7-K9Multimode DSL ANoneNo 63.C888EA-K9SHDSLANoneNo 64.C888EG+7-K9SHDSLANoneNo 65.C888ESRST-K9SHDSLANoneNo 66.C888ESRSTW-GNA-K9SHDSLA2.4 GHzNo 67.C888ESRSTW-GNE-K9SHDSLA2.4 GHzNo 68.C888SRST-K9SHDSLANoneNo 69.C888SRSTW-GN-A-K9SHDSLA2.4 GHzNo 70.C888SRSTW-GN-E-K9SHDSLA2.4 GHzNo 71.C892FSP-K9BNoneNo 72.C896VABNoneNo 73.C897VAMultimode DSL BNoneNo 74.C897VA-MMultimode DSL BNoneNo 75.C897VAM-WMultimode DSL B2.4 GHz, 5 GHz No 76.C897VAWMultimode DSL B2.4 GHz, 5 GHz No 77.C898EASHDSLANoneNo 78.CISCO861-K9EthernetBNoneNo 79.CISCO861-PCI-K9EthernetBNoneNo Table 1Cisco Product Models Addressed in this Document Models Product ClassificationEMC Class Wireless Standard Option of Outdoor Antenna Draft - Not Final Version 5 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Product Scope 80.CISCO861W-GN-A-K9EthernetB2.4 GHzNo 81.CISCO861W-GN-E-K9EthernetB2.4 GHzNo 82.CISCO861W-GN-P-K9EthernetB2.4 GHzNo 83.CISCO866VAEMultimode DSL BNoneNo 84.CISCO866VAE-K9Multimode DSL BNoneNo 85.CISCO867VAEMultimode DSL BNoneNo 86.CISCO867VAE-K9Multimode DSL BNoneNo 87.CISCO881-K9EthernetBNoneNo 88.CISCO881-PCI-K9EthernetBNoneNo 89.CISCO881-SEC-K9EthernetBNoneNo 90.CISCO881C-K9EthernetBNoneNo 91.CISCO881C-W-E-K9EthernetB2.4 GHzNo 92.CISCO881G-K9EthernetBNoneNo 93.CISCO881GC-K9EthernetBNoneNo 94.CISCO881GC-W-E-K9EthernetB2.4 GHzNo 95.CISCO881GW-GN-A-K9EthernetB2.4 GHz, 5 GHz No 96.CISCO881GW-GN-E-K9EthernetB2.4 GHz, 5 GHz No 97.CISCO881W-GN-A-K9EthernetB2.4 GHzNo 98.CISCO881W-GN-E-K9EthernetB2.4 GHzNo 99.CISCO881W-GN-P-K9EthernetB2.4 GHz, 5 GHz No 100.CISCO886VA-J-K9Multimode DSL ANoneNo 101.CISCO886VA-K9Multimode DSL ANoneNo 102.CISCO886VA-SEC-K9Multimode DSL ANoneNo 103.CISCO887V-K9Multimode DSL ANoneNo 104.CISCO887V-SEC-K9Multimode DSL ANoneNo 105.CISCO887VA-K9Multimode DSL ANoneNo Table 1Cisco Product Models Addressed in this Document Models Product ClassificationEMC Class Wireless Standard Option of Outdoor Antenna Draft - Not Final Version 6 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Product Scope 106.CISCO887VA-M-K9Multimode DSL ANoneNo 107.CISCO887VA-SEC-K9Multimode DSL …

Text truncated - open the document above for the full version.

59 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Translated Safety Warnings Aviso Esta unidade poderá ter mais de uma conexão de fonte de energia. Todas as conexões devem ser removidas para desligar a unidade. ¡Advertencia! Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por completo el suministro de energía, deben desconectarse todas las conexiones. Varning! Denna enhet har eventuellt mer än en strömförsörjningsanslutning. Alla anslutningar måste tas bort för att göra enheten strömlös. Aviso Esta unidade pode ter mais de uma conexão de fonte de alimentação. Todas as conexões devem ser removidas para interromper a alimentação da unidade. Advarsel Denne enhed har muligvis mere end en strømforsyningstilslutning. Alle tilslutninger skal fjernes for at aflade strømmen fra enheden. Draft - Not Final Version 60 Regulatory Compliance and Safety Information for Cisco 800 Series Routers OL-10260-06 Translated Safety Warnings Statement 1030—Equipment Installation WarningOnly trained and qualified personnel should be …

Text truncated - open the document above for the full version.