LFU00000001Cooker

SUNPENTOWN INDUCTION COOKTOP INSTRUCTION MANUAL FCC ID:LFU00000001 SR-17 Series SR-18 Series SR-19 Series Please read all instruction thoroughly before using this product. Key points before using the cooktop Before use: Place cooktop on flat surface, but keep away from the wall or other articles. For best results, leave at least 4 inches from all sides. When the air entrance or the air outlet is blocked, the internal temperature of the cooktop rises and may automatically shut off during cooking. Keep away from gas range or coal oil stove. If the surrounding temperature is high, cooker will stop heating. Keep away from water source; the cooktop will not work if the air inlet and the air outlet are wet. Please do not use this cooktop near credit card, disc, watch or radio. During use: Do not place a sealed can on the cooktop. It may explode. If the cooking oil is not enough or an empty pan is left on the cooktop for too long, it will damage the cookware. Do not place paper or cloth in between the cooktop and cookware to prevent over heat. Do not put heated oil in the pan during cooking. Please plug this cooktop in the correct 15 Amp outlet Do not share the outlet with other appliances and make sure it is correctly plugged in. Do not touch the ceramic plate immediately after cooking The surface of the cooktop may remain hot due to the heat transferred from the cooking pan. Do not insert anything in the inlet or outlet In case of the electric shock, do not insert any objects into the inlet and outlet. Do not damage the ceramic plate If the ceramic plate is broken, please turn off the unit and unplug the outlet immediately. Important: • If the electric cord is damaged, please contact our service technician for a replacement. • Although there’s a safety protector function to protect the cooktop from over heat, please do not put any of the small metal objects on the ceramic plate. For example, knife, fork, spoon and cover. These types of item will generate heat if it is placed on the cootop. • Anyone using the Pacemaker should contact his or her doctor for authorizations before using this item. • If the cooktop surface is broken, do not use the product anymore. If may cause electric shock. Emergency procedures: If the cooktop is not working property, please do not use this item and contact our service technician for service. Do not dissemble the unit yourself. Time Setting Function Time Setting Function is designed to set cook-time. This function is preceded by selecting Cooking/Warming operating, and then setting cook-time. When the time is up, the unit will shut off immediately. Press Minute Key to set cook time from 0 to 9 minutes. Press 10 Minutes Key to set cook time from 10 minutes to 90 minutes. When the timer is set, the minute key indicator will flash. Each flash count as a second and the cooking time decrease as the indicator light continue to flash. Warming Function Warming function is conducted by selecting this button. As the design of cooking function, there are 3 temperature settings L/M/H (keep warm from 122F/248F/392F) Press <- key to decrease the heating temperature. Press -> key to increase the heating temperature. Function Keys for (SR-1370/1770/1830/1860/1890/1930/1960/1990) Press this key to choose to boil water, make porridge, slow cooking for 35 minutes and slow cooking for 65 minutes. • The cooking pot must be in flat surface or this function may not work on the cooktop. • Do not use too little water or the water will dry out before the heating temperature of the cooking pot and the ceramic plate balance out. Do not use too much water, water must be 1.2 inches below the top edge of the pot or the water will over flow when it is boiled. • When this function is selected, it will start to cook after 10 seconds. During this operation, other functions will not be able to operate besides the off function. When the job is finished or the pot is lift from the cooktop, the cooktop will make 10 beeps then automatically shuts off. • If the cooking pot is not suitable for the cooktop, the water will not boil. Therefore, this function key will flashes and the cooktop shuts off. Boil Water When boiling the water, we recommend using cover so it will take less time to boil. Make Porridge This function can work with 1 cup of rice and 7 cups of water or 2 cups of rice and 14 cups of water. When cooking with 1 cup of rice, do not use cover. When cooking with 2 cups of rice, cover is needed. Slow Cooking When slow cook function is selected, the LED will show “35”. The cook time is set for 35 minutes. Press the same button once more, the LED will show “65”. When this function starts, the LED will show that the time is decrease from the selected time. Must use cover to cook when using this function. Safety Protection Use at least 3.2 inches or above in diameter cook wares on the cooktop. The reason for this is so that utensils in the pot will not heat and cause danger. If utensils are on the cooktop, the “keep Warm” light will blink and the unit will turn off after 10 minutes. Under pressure Protection If the voltage is too high, the temperature will decrease to prevent high temperature from over heating. A light will flash warning to check the cooktop. Automatically Shut-Off Function If no one is available to keep an eye on the cooktop, the cooktop will automatically shut off in 2 hours. Overheat Protection When the cooktop is in use, the heat will decrease automatically when it reaches 446ºF to prevent it from overheating. The light will switch from heat to keep warm. When the temperature of the cookware decreases, the cooktop will automatically turn back to heat. The cooktop will decrease in temperature if it overheats. It will restart again once the cooktop have lowered its temperature. A light will blink to indicate to check the cooktop. _____________________________________________________________________ To Use The Cooktop To turn on the cooktop, turn on the power and select L/M/H (Lo…

Text truncated - open the document above for the full version.

FCC ID : LFU00000001 FRONT SIDE OF EUT Number 1 FCC ID : LFU00000001 REAR SIDE OF EUT Number 2

FCC ID : LFU00000001 FCC ID LOCATION

FCC ID : LFU00000001 Number 1 Mechanical Construction FCC ID : LFU00000001 Number 2 Mechanical Construction FCC ID : LFU00000001 Number 3 Mechanical Construction FCC ID : LFU00000001 Number 4 Front SIDE Main board FCC ID : LFU00000001 Number 5 REAR SIDE Main board FCC ID : LFU00000001 Number 6 Front SIDE Module board FCC ID : LFU00000001 Number 7 REAR SIDE Module board FCC ID : LFU00000001 Number 8 Front SIDE Control panel board FCC ID : LFU00000001 Number 9 REAR SIDE Control panel board FCC ID : LFU00000001 Number 10 FCC ID : LFU00000001 Number 11 FCC ID : LFU00000001 Number 12 FCC ID : LFU00000001 Number 13

1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:10-Dec-2002Sheet of File:I:\®]¥ÉμØ\SR-1710A.SCHDrawn By: BD D25XB60 F1 20A/250V L3110uH/V VA V150K14 R1~R2 18K 1/2W R2 C1 P2P2 P1P1 P3P3 P4P4 LN C5 5.6u MPDH IGBTIGBT R5 4.7 1/4W R6 15K ZD1 18-2 R7 18K R12 680 R11620 1/4W C7 47P Q1 C1815R10 10K 1/4W R9 6.8K R8 39K VD CS 16V C6 ¤p/0.6u R25 R24 R23~R25 0 R22 R21 R20 R17 1.00M 1% R19~R22 56.2K 1% R13 100K 1% R14 100K 1% R16 3.40K 1% R18 3.40K 1% R28 ¤p/30.1K 1% R27 2.21K 1% R26 ¤p/4.64K 1% 5 4 2 3 12 U1A LM339 7 6 1 U1B LM339 C11 ¤p/1500P PEI R33 22K C12 220P R29 16.9K 1% 1110 13 U1D LM339 R30 100K R316.8K C10 0.1u R32 1M SB R34 390K R3 360 R36 68K 9 8 14 U1C LM339 C13 PEI 6800P D3 1N4148 D2 1N4148 D4 1N4148 D5 1N4148 R37 24K 16V 5 4 2 3 12 U2A LM339 11 10 13 U2D LM339 VR1 100KB R38 11K C14 0.1u 16V R45 100 R40 82K C16 270P PWM R41 ¤p/221K 1% D7 1N4148 R42 5.6K R43 27K R44 3.6K 16V Q3 C1815 Q4 A1015 16V VD CS VD 16V 1 2 3 4 5 CN2CN2 GND 16V SB PWM AN1 R48 47K S5J53S5J53 R19 D8 1N4148 7 6 1 U2B LM339 9 8 14 U2C LM339 R47 15K R35 47K R46 82K D9 1N4148 R15 910 AN1 1 2 CN1 CN1 D10 1N4148 +C18 22u/50V R4 39K + C3 10u/50V + C4 22u/50V 5V C9 680P C8 4700P D1 1N5819 +C15 1u/50V C17 0.022u PEI 5V C2 4700P SB 5V Q2 C1815 16V ZD2 9A2 IGBT R39 18K IGBT L2 110uH/H C20 X 4.7u D6 1N4148 C19 0.1u L1 J12~14 R49 2.7K CT2 CT C21 6800PR50 18K 16V 1 2 3 CN10 CON3 CT1 R92 100 1/4W D21 1N4148 110V(120V) R1 ¤¤¤j/1200P PEI 16V 16V ¤¤¤j/0.4u R23 ¤¤¤j/26.7K 1% ¤¤/210K 1% ¤j/221K(182K)1% ¤¤/10.2K 1% ¤j/11.3K(14.3K)1%

1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:10-Dec-2002Sheet of File:D:\PCB°òªO\SCH\±± ̈îªO\SR-1718N.SCHDrawn By: R1 750 1/8W R2 560 1/8W R3 680 1/8W R4 910 1/8W R5 1.1K 1/8W R6 1.5K 1/8W R7 2K 1/8W R8 2.4K 1/8W R9 3.3K 1/8W R10 4.3K 1/8W SW10 SEL SW9 TEN SW8 ONE SW7 C/T SW6 MIN SW5 - SW4 MED SW3 + SW2 MAX SW1 OFF AN2 D1D1 5V Q2 C1015 R12 15K 1/8W PA3 D3D3 PA2 e2 pa6 d2 pa5 c2 pa4 dp2 pa7 Q1 C1015 R11 15K 1/8W PA3 D2D2 PA1 g2 pa6 f2 pa7 b2 pa5 a2 pa4 R17 240 1/8W R18 240 1/8W R19 240 1/8W R20 240 1/8W PA4PA5PA6PA7 LED5 pa4 LED6 pa5 LED7 pa6 LED8 pa7 a1 pa4 b1 pa5 g1 pa6 f1 pa7 Q3 C1015 R13 1/8W 15K D4D4 PA1 PA2 R14 2.2K 1/8W D5D5 PA3 PA1 5V Q4Q4Q5Q5 R15 2.2K 1/8W D6D6 5V PA3 PA2 Q6Q6 5V R16 2.2K 1/8W D7D7 PA1 PA2 SR-16/17/18/19XX ±± ̈î°òªO c1 pa4 d1 pa5 e1 pa6 dp1 pa7 LED9 pa4 LED10 pa7 LED2 pa5 LED1 pa6 LED3 pa7 LED4 pa4 Q9 Q7 Q8C1015 R25 15K 1/8W R24 2.2K 1/8W R21 47K 1/8W R22 47K 1/8W R23 47K 1/8W + C1 100 5V PA3 PA1 PA2 (011)(101)(110)(100)(010)(001) (000) 1 2 3 4 5 6 7 8 9 10 CN1 CON11 PA3 PA2 PA1 AN2 GND 5V PA4 PA5 PA6 PA7 «O·Å¥[¼öμNμ°ºC¿L¶}¤ô 6587

1234 A B C D 4321 D C B A Title NumberRevisionSize A4 Date:10-Dec-2002Sheet of File:I:\®]¥ÉμØ\SR-1710B.SCHDrawn By: T1T1 1 2 CN9CN9 D12~D19 1N4004 D19 D16 D17 D12 D13 D14 D15 10V 19V + C37 1000u/25V + C22 470u/35V 12 CN3CN3 ZD3 18-2 Q5 D468 R54 1.8K 1/4W Q6 B647 R64 12KR63 22.1K 1% R62 10.0K 1% R532.2K R51 470K ZD5 5C1 16V 10V 5V Q8 D468 +C35 100u/10V R56 220 R75 22K 19V R71 27 1/4W + C34 47u/25V 1 2 3 4 5 CN8CN8 SB 16V AN1 5V PWM ZD6 6A1 FH R79 27 1/4W R52 12K R70 3K 5V 5 6 7 U5B LM393 PA3 1 PA2 2 AN3 5 AN1 7 VSS 9 /RES 11 OSC1 13 PA4 18 PA6 16 PA1 3 PA0 4 AN2 6 AN0 8 PWM 10 VDD 12 OSC2 14 PA7 15 PA5 17 U4 HT46R47 + C24 1u/50V R66 15K C26 0.1u 5V Y1 8.0MHz 5V + C27 1u/50V D11 1N4148 5V +C29 4.7u/50V R68 10K PWM 1 2 3 4 CN6 CN6 1 2 3 4 5 6 CN7 CN7 GND AN2 PA1 PA2 PA3 PA4 PA5 PA6 PA7 5V AN3 PA2 PA1 PA4 PA5 PA6 PA7 R55 100K R67 220K AN2 Q7 C1815 SB R80 13K R72 100K AN1 R69 4.7M 5V BZ1 BUZZER R59 150K R60 150K 13£p C32 1000P PEI R77 180K R76 2.7K R74 3.3K 10V R65150K D20 1N4148 ZD7 6C2(6A1) ZD4 7B1 5V R58 10.7K 1% R57 6.2K(3.6K) +C25 10u/50V 19V R82 220K C28 0.047u R83 110K(120K) R81 2.2K R73 4.7K R78 13K 19V AN3 PA3 R84 150K R85 13K + C33 10u/50V 10V GND 3 2 1 4 11 U3A LM324 5 6 7 U3B LM324 3 2 1 8 4 U5A LM393 10 9 8 U3C LM324 12 13 14U3D LM324 + C36 4.7u/50V + C31 1u/50V + C30 1u/50V + C23 1u/50V 10V Q9 C1815 R86 39K R87 47K ZD8 27-2 C38 330P 1 2 3 CN4 CON2 CT1 CT2 PWM R91 ¡Û(47K/LCD) AN2 R93 220K R61 3.40K 1% R88 560K 12 CN5 NTC 5V 110V(120V) C? 100P 0/LCD ¡Û/LCD ¡Û/LCD ¡Û/LCD ¡Û/LCD ¡Û/LCD ¡Û/LCD 270K/LCD

FCC TEST REPORT Report No. : F272505 SPORTON International Inc. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT for PART 18, SUBPART C Equipment : Cooker Model No. : SR-1841, SR-1851, SR-1861 FCC ID : LFU00000001 Filing Type : Certification Applicant : Sunpentown Electric Co., Ltd. No. 13, Gong Jain S. Rd., Keelung, Taiwan, R.O.C. † The test result refers exclusively to the test presented test model / sample. † Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. † Certificate or Test Report must not be used by the applicant to claim the product in this test report endorsement by NVLAP or any agency of U.S. government. SPORTON International Inc. 6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. FCC TEST REPORT Report No. : F272505 SPORTON International Inc. FCC ID : LFU00000001 TEL : 886-2-2696-2468 Page No. : i FAX : 886-2-2696-2255 Issued Date : Oct. 29, 2002 Table of Contents History of this test report.........................................................................................................................ii CERTIFICATE OF COMPLIANCE..............................................................................................................1 1. General Description of Equipment under Test.....................................................................................2 1.1. Applicant.......................................................................................................................................................................................2 1.2. Manufacturer.................................................................................................................................................................................2 1.3. Basic Description of Equipment under Test...................................................................................................................................2 1.4. Feature of Equipment under Test..................................................................................................................................................2 2. Test Configuration of Equipment under Test.......................................................................................3 2.1. Test Manner..................................................................................................................................................................................3 2.2. Description of Test System...........................................................................................................................................................3 3. EUT OPERATION CONDITION..............................................................................................................4 4. General Information of Test.................................................................................................................5 4.1. Test Facility...................................................................................................................................................................................5 4.2. Standard for Methods of Measurement.........................................................................................................................................5 4.3. Test in Compliance with................................................................................................................................................................5 4.4. Frequency Range Investigated......................................................................................................................................................5 4.5. Test Distance................................................................................................................................................................................5 5. Test of Conducted Powerline...............................................................................................................6 5.1. Major Measuring Instruments........................................................................................................................................................6 5.2. Test Procedures............................................................................................................................................................................7 5.3. Typical Test Setup Layout of Conducted Powerline......................................................................................................................8 5.4. Test Result of AC Powerline Conducted Emission........................................................................................................................9 6. Test of Radiated Emission..................................................................................................................11 6.1. Major Measuring Instruments......................................................................................................................................................11 6.2. Test Procedures..........................................................................................................................................................................12 6.3. Typical Test Setup Layout of Radiated Emission........................................................................................................................13 6.4. Test Result of Radiated Emission...............................................................................................................................................14 7. EMI Suppression Component List.......................................................................................................16 8. Cable Loss..........................................................................................................................................17 9. List of Measuring Equipments Used....…

Text truncated - open the document above for the full version.

FCC TEST REPORT Report No. : F272505 SPORTON International Inc. FCC ID : LFU00000001 TEL : 886-2-2696-2468 Page No. : 1 of 3 FAX : 886-2-2696-2255 Issued Date : Nov, 19, 2002 1.1. Photographs of Conducted Powerline Test Configuration l The photographs show the configuration that generates the maximum emission. FRONT VIEW REAR VIEW FCC TEST REPORT Report No. : F272505 SPORTON International Inc. FCC ID : LFU00000001 TEL : 886-2-2696-2468 Page No. : 2 of 3 FAX : 886-2-2696-2255 Issued Date : Nov, 19, 2002 SIDE VIEW FCC TEST REPORT Report No. : F272505 SPORTON International Inc. FCC ID : LFU00000001 TEL : 886-2-2696-2468 Page No. : 3 of 3 FAX : 886-2-2696-2255 Issued Date : Nov, 19, 2002 1.2. Photographs of Radiated Emission Test Configuration l The photographs show the configuration that generates the maximum emission. Handset FRONT VIEW REAR VIEW