LHJ-BL28NARD2BL28NA-RD2

BL28NA-RD2 OEM Manual and User Guide Internal BL28NA-RD2 OEM Manual and User Guide v 2 (to be used for certification) FCC ID: LHJ-BL28NARD2 IC ID: 2807E-BL28NARD2 BL28NA-RD2 OEM Manual and User Guide Internal Terms and Acronyms • CDMA Code Division Multiple Access • DCM Data Connectivity Module • DRX Discontinuous Reception • ES Engineering Sample • FDD Frequency Division Duplex • GLONASS GLOBal’naya NAVigatsionnaya Sputnikovaya Sistema • GNSS Global Navigation Satellite System • GPIO General Purpose Input Output • GSM Global System for Mobile • HU Head Unit • HSIC High Speed Inter-Chip • LTE Long Term Evolution • MP Mass Production • NAD Network Access Device • OEM Original Equipment Manufacturer • PCB Printed Circuit Board • PHY Physical Layer • SIM Subscriber Identity Module • TCU Telematics Control Unit • TDD Time Division Duplex • TSP Telematics Service Provider • UMTS Universal Mobile Telecommunication System • WCDMA Wideband Code Division Multiple Access BL28NA-RD2 OEM Manual and User Guide Internal BL28NA-RD2 Module The BL28NA-RD2 NAD is a proprietary modem module designed by Continental Automotive Systems, Inc. The modem will be integrated into Data Connectivity Modules (DCMs) or Head Units (HUs) designed and produced by Continental or by a 3 rd party for use by automotive OEMs. DCMs will be installed into vehicles during the OEM’s factory assembly process and will not be accessible without use of special tools. Primary use-cases are data-centric with data and voice connections to Telematics Service Providers (TSP). 1 Key Features 1.1 LTE CAT4 NAD Module Air Interface Support • LTE FDD/TDD: 3GPP Rel 10 • LTE FDD CAT4 (up to 150-Mbps UL/50-Mbps DL) • LTE TDD CAT4 (up to 90-Mbps UL/27-Mbps DL) for TDD Configuration 1 • UMTS: HSUPA CAT 6 (up to 5.76-Mbps), HSPA CAT24 (up to 21-Mbps) 2 Regulatory Compliance Notes FCC: This device complies with Part 15, Part 22(H), Part 24(E) and Part 27 of the FCC Rules. The FCC ID for this device is LHJ-BL28NARD2. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. BL28NA-RD2 OEM Manual and User Guide Internal Industry of Canada: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L’appareil ne doit pas produire de brouillage; (2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Additional testing and certification for SAR will be required if the distance limitation cannot be met. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Des tests et une certification supplémentaires pour le SAR seront requis si la limitation de distance ne peut pas être respectée. 3 Device Installation and User Manual The BL28NA-RD2 module is a proprietary product designed and manufactured by Continental Automotive Systems, Inc. for integration into telematics control units manufactured by Continental Automotive Systems, Inc. for automotive OEMs. i. The module is limited to installation ONLY in an integrated device manufactured by Continental Automotive Systems, Inc. ii. During manufacturing process of the integrated device, the module is soldered onto the pcb of the integrated device. iii. The integrated device must provide RF connectors to external antennas or RF traces to connect the BL28NA-RD2 modules to antennas inside the integrated device. The ty…

Text truncated - open the document above for the full version.

Internal Continental Automotive Systems, Inc. 21440 West Lake Cook Road, Deer Park, Illinois 60010, United States Tel: 8478622435 ; Fax: 847-8628016 Date: November 10, 2022 FCC Laboratory 7435 Oakland Mills Rd Columbia MD 21046 Subject: Request for Confidentiality FCC ID: LHJ-BL28NARD2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission’s rules (47CFR§§0.457, 0.459), we are requesting the Commission to withhold the following documents from public disclosure indefinitely. ⚫ Schematic Diagram ⚫ Block Diagram ⚫ Part List ⚫ Operational Description ⚫ Tune-up Procedure Above mentioned documents which contain detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’ s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the Commission to withhold the following documents for 180 days after the grant of equipment authorization is issued: ⚫ External Photos ⚫ Internal Photos ⚫ Test Setup Photos ⚫ User Manual It is our understanding that all measurement test reports, FCC ID label format cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ Jianming Zhang [email protected] Internal Tel: +1-224-4510155

Internal Continental Automotive Systems, Inc. 21440 West Lake Cook Road, Deer Park, Illinois 60010, United States Tel: 8478622435 ; Fax: 847-8628016 Date: November 10, 2022 Module Approval Checklist FCC ID: LHJ-BL28NARD2 Item Requirements EUT 1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module is equipped with its own shielding case. 2. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module has buffer modulation / data inputs. 3. The module must contain power supply regulation on the module The module has its own power supply regulation. 4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) Not applicable to licensed modules. 5. The module must demonstrate compliance in a stand-alone configuration The module was tested on evaluation board, and it’s not inside of another device during testing 6. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display The module transmitter will be labeled with its own FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee The module approved transmitter complies with all applicable rules and the integration manual contains any specific requirements addressed to the integrator and/or to the end-user of the final end-product. 8. The module must comply with RF exposure requirements The modular transmitter complies with RF exposure requirement. ______________________ Jianming Zhang [email protected] Tel: +1 224 4510155

Internal Continental Automotive Systems, Inc. 21440 West Lake Cook Road, Deer Park, Illinois 60010, United States Tel: 8478622435 ; Fax: 847-8628016 FCC Agent Authorization Date: November 14, 2022 To whom it may concern, Continental Automotive Systems, Inc. hereby authorize Sporton International Inc. to act on our behalf in all matters relating to applications for FCC equipment authorization, including the signing of all documents relating to these matters. Any and all acts carried out by Sporton International Inc. on our behalf shall have the same effect as acts of our own. We also hereby certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits that includes FCC benefits pursuant to section 5301 of the Anti-Drug Abuse Act of 1988. 21 U.S.C. 862. This authorization is limited to the product of as following: FCC ID: LHJ-BL28NARD2 This authorization is valid until further written notice from the Continental Automotive Systems, Inc. Sincerely, ________________________ James Zhang [email protected] Tel: +1 224 4510155

PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 1 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 1. Photograph of the EUT BL28NA-RD2 (Brand Name: Continental / Model Name: BL28NA-RD2)

Internal Label size: 25x25 mm

PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 2 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 2. Internal Photograph of the EUT BL28NA-RD2 (Brand Name: Continental / Model Name: BL28NA-RD2) PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 3 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 4 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 5 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 3. Photograph of the Antenna PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 6 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 WWAN Antenna PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 7 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 8 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 9 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 GNSS Antenna PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 10 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 PHOTOGRAPHS OF EUT Report No.: EP2O1724 TEL : 886-3-327-3456 Page Number : 11 of 11 FAX : 886-3-328-4978 Issue Date : Nov. 11, 2022 Report Version : 01 ─────THE END────

TEL : 886-3-327-3456 Page : 1 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 RF EXPOSURE EVALUATION REPORT FCC ID : LHJ-BL28NARD2 Equipment : BL28NA-RD2 Brand Name : Continental Model Name : BL28NA-RD2 Applicant : Continental Automotive Systems, Inc. 21440 W Lake Cook Rd., Deer Park, IL 60010, USA Manufacturer : Continental Automotive Systems, Inc. 21440 W Lake Cook Rd., Deer Park, IL 60010, USA Standard : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC has been evaluated this product in accordance with 47 CFR Part2.1091 and it complies with applicable limit. Sporton Lab is accredited to ISO 17025 by Taiwan Accreditation Foundation (TAF code: 1190) and the FCC designation No. TW1190 under the FCC 2.948(e) by Mutual Recognition Agreement (MRA) in FCC evaluation. The results in this report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) Approved by: Cona Huang / Deputy Manager TEL : 886-3-327-3456 Page : 2 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 Table of Contents 1. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 4 2. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 5 3. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 6 4. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 7 4.1. Standalone Power Density Calculation ............................................................................................. 7 4.2. Collocated Power Density Calculation ............................................................................................... 8 TEL : 886-3-327-3456 Page : 3 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 History of this test report Report No. Version Description Issued Date FA2O1724 Rev. 01 Initial issue of report Nov. 29, 2022 TEL : 886-3-327-3456 Page : 4 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 1. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type BL28NA-RD2 Brand Name Continental Model Name BL28NA-RD2 FCC ID LHJ-BL28NARD2 Wireless Technology and Frequency Range GSM850: 824.2 MHz ~ 848.8 MHz GSM1900: 1850.2 MHz ~ 1909.8 MHz WCDMA Band II: 1852.4 MHz ~ 1907.6 MHz WCDMA Band IV: 1712.4 MHz ~ 1752.6 MHz WCDMA Band V: 826.4 MHz ~ 846.6 MHz LTE Band 2: 1850 MHz ~ 1910 MHz LTE Band 4: 1710 MHz ~ 1755 MHz LTE Band 5: 824 MHz ~ 849 MHz LTE Band 7: 2500 MHz ~ 2570 MHz LTE Band 12: 699 MHz ~ 716 MHz Mode GPRS/EGPRS RMC 12.2Kbps HSDPA HSUPA DC-HSDPA LTE: QPSK, 16QAM HW Version P4.0 EUT Stage Identical Prototype Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Reviewed by: Jason Wang Report Producer: Paula Chen TEL : 886-3-327-3456 Page : 5 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 2. Maximum RF average output power among production units Mode Burst average power(dBm) GSM 850 GSM 1900 GPRS (GMSK, 1 Tx slot) 33.5 30.5 GPRS (GMSK, 2 Tx slots) 32.5 29.5 GPRS (GMSK, 3 Tx slots) 31.5 28.5 GPRS (GMSK, 4 Tx slots) 30.5 26.5 EDGE (8PSK, 1 Tx slot) 27.5 26.5 EDGE (8PSK, 2 Tx slots) 27.0 26.5 EDGE (8PSK, 3 Tx slots) 25.5 24.5 EDGE (8PSK, 4 Tx slots) 24.5 23.5 Mode Maximum Average power(dBm) WCDMA Band II 24.5 Band IV 24.5 Band V 24.5 LTE Band 2 24.0 Band 4 24.0 Band 5 24.0 Band 7 24.0 Band 12 24.0 TEL : 886-3-327-3456 Page : 6 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 3. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: 퐒= 퐏퐆 ퟒ훑퐑 ퟐ Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna TEL : 886-3-327-3456 Page : 7 of 9 FAX : 886-3-328-4978 Issued Date : Nov. 29, 2022 Form version: 180516 RF EXPOSURE EVALUATION REPORT Report No. : FA2O1724 4. Radio Frequency Radiation Exposure Evaluation 4.1. Standalone Power Density Calculation Band Antenna Gain (dBi) Maximum Power (dBm) Maximum ERP (dBm) Maximum ERP (W) Maximum EIRP (dBm) Maximum EIRP (W) Maximum Output Power Limit (W) Average EIRP (mW) Power Density at 20cm (mW/cm^2) Limit (mW/cm^2) GPRS 850 (1 Tx slot) 4.50 33.50 35.850 3.846 38.000 6.310 7.000 794.328 0.158 0.549 GPRS 850 (2 Tx slots) 4.50 32.00 34.350 2.723 36.500 4.467 7.000 1116.709 0.222 0.549 GPRS 850 (3 Tx slots) 4.50 30.50 32.850 1.928 35.000 1.928 7.000 1185.769 0.236 0.549 GPRS 850 (4 Tx slots) 4.50 29.50 31.850 1.531 34.000 1.531 7.000 1258.925 0.251 0.549 EGPRS 850 (1 Tx slot) 4.50 27.50 29.850 0.966 32.000 0.968 7.000 199.526 0.040 0.549 EGPRS 850 (2 Tx slots) 4.50 26.00 28.350 0.684 30.500 1.122 7.000 280.505 0.056 0.549 EGPRS 850 (3 Tx slots) 4.50 24.50 26.850 0.484 29.000 0.794 7.000 297.873 0.059 0.549 EGPRS 850 (4 Tx slots) 4.50 23.50 25.850 0.385 28.000 0.631 7.000 315.479 0.063 0.549 GPRS 1900 (1 Tx sl…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : A7-1 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 7 Peak-to-Average Ratio Mode LTE Band 7 / 20MHz Mod. QPSK 16QAM 64QAM 256QAM Limit: 13dB RB Size Full RB Full RB Full RB Full RB Result Middle CH - 5.94 - - PASS LTE Band 7 / 20MHz / 16QAM Middle Channel / Full RB TEL : 886-3-327-3456 Page Number : A7-2 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 26dB Bandwidth Mode LTE Band 7 : 26dB BW(MHz) BW 1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz Mod. QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Middle CH - - - - - 4.98 - 9.91 - 14.42 - 18.82 LTE Band 7 Middle Channel / 5MHz / 16QAM Middle Channel / 10MHz / 16QAM TEL : 886-3-327-3456 Page Number : A7-3 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 7 Middle Channel / 15MHz / 16QAM Middle Channel / 20MHz / 16QAM TEL : 886-3-327-3456 Page Number : A7-4 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 Occupied Bandwidth Mode LTE Band 7 : 99%OBW(MHz) BW 1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz Mod. QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Middle CH - - - - - 4.49 - 9.03 - 13.46 - 17.90 LTE Band 7 Middle Channel / 5MHz / 16QAM Middle Channel / 10MHz / 16QAM TEL : 886-3-327-3456 Page Number : A7-5 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 7 Middle Channel / 15MHz / 16QAM Middle Channel / 20MHz / 16QAM TEL : 886-3-327-3456 Page Number : A7-6 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 Conducted Band Edge LTE Band 7 / 5MHz / 16QAM Lowest Band Edge / 1RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A7-7 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 7 / 10MHz / 16QAM Lowest Band Edge / 1 RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A7-8 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 7 / 15MHz / 16QAM Lowest Band Edge / 1 RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A7-9 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 7 / 20MHz / 16QAM Lowest Band Edge / 1 RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A7-10 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 Frequency Stability Test Conditions LTE Band 7 (16QAM) / Middle Channel Limit Temperature (°C) Voltage (Volt) BW 10MHz Note 2. Deviation (ppm) Result 50 Normal Voltage 0.0006 PASS 40 Normal Voltage 0.0003 30 Normal Voltage 0.0000 20(Ref.) Normal Voltage 0.0000 10 Normal Voltage 0.0023 0 Normal Voltage 0.0022 -10 Normal Voltage 0.0007 -20 Normal Voltage 0.0009 -30 Normal Voltage 0.0002 20 Maximum Voltage 0.0004 20 Normal Voltage 0.0000 20 Battery End Point 0.0002 Note: 1. Normal Voltage =12 V.；Battery End Point (BEP) =14 V.；Maximum Voltage =16 V. 2. The frequency fundamental emissions stay within the authorized frequency block. TEL : 886-3-327-3456 Page Number : A12-1 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 12 Peak-to-Average Ratio Mode LTE Band 12 / 10MHz Mod. QPSK 16QAM 64QAM 256QAM Limit: 13dB RB Size Full RB Full RB Full RB Full RB Result Middle CH - 5.83 - - PASS LTE Band 12 / 10MHz / 16QAM Middle Channel / Full RB TEL : 886-3-327-3456 Page Number : A12-2 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 26dB Bandwidth Mode LTE Band 12 : 26dB BW(MHz) BW 1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz Mod. QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Middle CH - 1.30 - 2.99 - 4.88 - 9.69 - - - - LTE Band 12 Middle Channel / 1.4MHz / 16QAM Middle Channel / 3MHz / 16QAM TEL : 886-3-327-3456 Page Number : A12-3 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 12 Middle Channel / 5MHz / 16QAM Middle Channel / 10MHz / 16QAM TEL : 886-3-327-3456 Page Number : A12-4 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 Occupied Bandwidth Mode LTE Band 12 : 99%OBW(MHz) BW 1.4MHz 3MHz 5MHz 10MHz 15MHz 20MHz Mod. QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM QPSK 16QAM Middle CH - 1.09 - 2.72 - 4.51 - 9.01 - - - - LTE Band 12 Middle Channel / 1.4MHz / 16QAM Middle Channel / 3MHz / 16QAM TEL : 886-3-327-3456 Page Number : A12-5 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 12 Middle Channel / 5MHz / 16QAM Middle Channel / 10MHz / 16QAM TEL : 886-3-327-3456 Page Number : A12-6 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 Conducted Band Edge LTE Band 12 / 1.4MHz / 16QAM Lowest Band Edge / 1 RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A12-7 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 12 / 3MHz / 16QAM Lowest Band Edge / 1 RB Highest Band Edge /1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A12-8 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 12 / 5MHz / 16QAM Lowest Band Edge / 1RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A12-9 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 LTE Band 12 / 10MHz / 16QAM Lowest Band Edge / 1 RB Highest Band Edge / 1 RB Lowest Band Edge / Full RB Highest Band Edge / Full RB TEL : 886-3-327-3456 Page Number : A12-10 of 10 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG120221-02 Frequency Stability Test Conditions LTE Band 12 (16QAM) / Middle Channel Limit Temperature (°C) Voltage (Volt) BW 10MHz Note 2. Deviation…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : 1 of 25 FAX : 886-3-328-4978 Issued Date : Dec. 07, 2022 Report Template No.: BU5-FGLTE Version 2.4 Report Version : 04 FCC RADIO TEST REPORT Report No. : FG120221-02 FCC RADIO TEST REPORT FCC ID : LHJ-BL28NARD1 Equipment : BL28NA-RD1 Brand Name : Continental Model Name : BL28NA-RD1 Applicant : Continental Automotive Systems, Inc. 21440 West Lake Cook Road, Deer Park, Illinois 60010, United States Manufacturer : Continental Automotive Systems, Inc. 21440 West Lake Cook Road, Deer Park, Illinois 60010, United States Standard : FCC 47 CFR Part 2, 22(H), 24(E), 27 The product was received on Oct. 07, 2021 and testing was started from Oct. 12, 2021 and completed on Oct. 15, 2021. We, Sporton International Inc. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures given in ANSI / TIA-603-E and has been in compliance with the applicable technical standards. The test results in this variant report apply exclusively to the tested model / sample. Without written approval of Sporton International Inc. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 25 FAX : 886-3-328-4978 Issued Date : Dec. 07, 2022 Report Template No.: BU5-FGLTE Version 2.4 Report Version : 04 FCC RADIO TEST REPORT Report No. : FG120221-02 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 6 1.1 Product Feature of Equipment Under Test ........................................................................................ 6 1.2 Product Specification of Equipment Under Test ................................................................................ 6 1.3 Modification of EUT ........................................................................................................................... 6 1.4 Testing Location ................................................................................................................................ 7 1.5 Applicable Standards ......................................................................................................................... 7 2 Test Configuration of Equipment Under Test ......................................................................................... 8 2.1 Test Mode .......................................................................................................................................... 8 2.2 Connection Diagram of Test System ............................................................................................... 10 2.3 Support Unit used in test configuration and system ........................................................................ 10 2.4 Measurement Results Explanation Example ................................................................................... 10 2.5 Frequency List of Low/Middle/High Channels ................................................................................. 11 3 Conducted Test Items .............................................................................................................................. 13 3.1 Measuring Instruments .................................................................................................................... 13 3.2 Conducted Output Power and ERP/EIRP ....................................................................................... 14 3.3 Peak-to-Average Ratio .................................................................................................................... 15 3.4 Occupied Bandwidth ........................................................................................................................ 16 3.5 Conducted Band Edge .................................................................................................................... 17 3.6 Frequency Stability .......................................................................................................................... 19 4 Radiated Test Items ................................................................................................................................. 20 4.1 Measuring Instruments .................................................................................................................... 20 4.2 Radiated Spurious Emission Measurement ...................................................…

Text truncated - open the document above for the full version.