LU9643309X1TXTire Twister Lights

ENG Press both buttons up, car will move forward. (Press both buttons down, car will reverse.) Press right button up, car will turn left. (Press right button down, car will reverse to the left.) Press left button up, car will turn right. (Press left button down, car will reverse to the right.) Press and hold buttons as shown, car will spin in a circle. (Press and hold opposite buttons, car will spin in the opposite direction.) • Do not play with RC Tire Twister™ Lights in the street or where there is vehicular trac or in heavily traveled areas with pedestrians. • Do not stand on, sit on or throw RC Tire Twister™ Lights as doing so can result in injury to the person and irreversible damage to the unit. • Do not attempt to use the “tire” portion of this toy as a wheel on any other toy or vehicle such as a wagon, tricycle, etc. or in any manner other than the manner described in this manual. • Do not run car/tire into furniture, walls, pets, people etc., as doing so may cause injury to the people and pets and irreparable damage to the unit. • Do not allow long hair or loose apparel such as shoestrings near the turning wheels of the car. • Do not drive car/tire through water, mud, etc. • Warning! This toy produces ashes that may trigger epilepsy in sensitised individuals. • Frequency bands: 2410MHz-2473MHz • Maximum transmitted power (for EU): -9.26dBm (remote control), -10.29dBm (car). IMPORTANT INFORMATION A. B. The Little Tikes Company makes fun, high quality toys. We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product. This warranty is valid only if the product has been assembled and maintained per the instructions. This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising from defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers. U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service, The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details. Outside U.S.A and Canada: Contact place of purchase for warranty service. This warranty gives you specic legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. ‘Let’s care for the environment!’ The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility. LIMITED WARRANTY Please keep this manual as it contains important information. C. • Use only size “AA” (LR6) alkaline batteries (6 required). • Charging of rechargeable batteries should only be done under adult supervision. • Remove rechargeable batteries from the product before recharging. • Do not mix old and new batteries. • Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. • Be sure to insert the batteries correctly and follow the toy and battery manufacturer’s instruction. • Always remove exhausted or dead batteries from the product. • Dispose of dead batteries properly: do not burn or bury them. • Do not attempt to recharge non-rechargeable batteries. • Avoid short-circuiting battery terminals. • Remove batteries before placing the unit into storage for a prolonged period of time. BATTERY SAFETY INFORMATION FCC COMPLIANCE 2x AA Batteries 1.5V AA/LR6 1.5V AA/LR6 Bottom Layer Top Layer RIBBON 1.5V AA/LR6 – 1.5V AA/LR6 + 1.5V AA/LR6 + 1.5V AA/LR61.5V AA/LR6 1.5V AA/LR6 1.5V AA/LR6 QUICK START 1. To assure your car will pick up the correct frequency, switch the car ON rst, then switch the remote control ON. 2. Place the car on the oor. 3. Press the buttons on the remote control as shown in the diagrams below. NOTE: When nished playing, rst turn o the car, then turn o the remote control. DRIVING THE TIRE TWISTER DRIVE IT, SPIN IT, FLIP IT ! DRIVING THE RC CAR 1. Set the car inside the monster tire making sure the car tires straddle the ribs inside the monster tire. 2. Place the monster tire on the oor. 3. To assure your car will pick up the correct frequency, switch the car ON rst, then switch the remote control ON. 4. Follow the remote control patterns below. As the car inside the monster tire moves, the monster tire will turn, twist and spin! 5. While going forward, reverse the direction and the car will ip backward and forward inside the monster tire. NOTE: When nished playing, rst turn o the car, then turn o the remote control. REMOTE CONTROL 1. Using a Phillips screwdriver (not included) remove the screw and battery compartment cover from the underside of the remote. 2. Install two (2) fresh 1.5V AA alkaline batteries (not included) making sure the (+) and (-) ends face the proper direction as indicated inside the battery compartment. 3. Replace the compartment cover and tighten the screw. IMPORTANT NOTE: In the event of a malfunction, reset the item by removing and replacing the batteries. If function is still not restored, replace the batteries with fresh alkaline batteries. Before playing, an adult must install fresh alkaline batteries in the car and remote. Here’s how: 1. Using a Phillips screwdriver (not included) remove the screw and battery compartment…

Text truncated - open the document above for the full version.

MGA Entertainment (HK) Ltd. Date: 2020/4/20 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: LU9643309X1TX To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with MGA Entertainment (HK) Ltd. This authorization is valid until further written notice from the applicant.

MGA Entertainment (HK) Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: MGA Entertainment (HK) Ltd. Suite 301, 3/F, Chinachem Golden Plaza, No.77 Mody Road, Tsim Sha Tsui East Kowloon Hong Kong Regarding: Confidentiality Request regarding application for FCC ID: LU9643309X1TX LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY A dditionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos I nternal Photos Test Setup Photos User manual(s)

Applicant Declaration Applicant Declaration R ev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name MGA Entertainment (HK) Ltd. Address Suite 301, 3/F, Chinachem Golden Plaza, No.77 Mody Road, Tsim Sha Tsui East Kowloon Hong Kong Grantee Code LU9 FCC ID LU9643309X1TX Authorized Contact Name Julian Chung Contact Email [email protected] Contact Phone 852-2732-9200 ext.29200 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a)in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b)in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c)if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d)in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e)in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample a vailable upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, pr ovide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f)neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g)the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technol ogies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 4 External Photos for SZEM2004002790CR FCC ID: LU9643309X1TX SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 4 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 4 of 4

                                                         !"     #              !$ "       #     %         #           1 . 5 V / A A / L R 6 1 . 5 V / A A / L R 6                    U.S.& Other coun t ries. 1-800-321-0183www.littletikes.comMade in China       Little Tikes         M il t o n K e y n e s . M k 8 O E S . B u c k s . U K 5 0 P r e s l e y W a y . 643309X1643390X1TX

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Internal Photos for SZEM2004002790CR FCC ID: LU9643309X1TX SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 EUT Constructional Details SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400279001 Page: 1 of 42 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZEM2004002790CR(SGS SZ No.: T52010240049EM) Applicant: MGA ENTERTAINMENT (H.K.) LTD Address of Applicant: SUITE 301, 3/F., CHINACHEM GOLDEN PLAZA, NO.77 MODY ROAD, TSIMSHATSUI EAST, KOWLOON, Hong Kong Manufacturer: Guangzhou Spinmark Electronics Technology Co., Ltd Address of Manufacturer: 1/F, 2/F and 3/F(partial), Block A, 64 Songshan Road, Shilou Town, Panyu District, Guangzhou, Guangdong, China Equipment Under Test (EUT): EUT Name: Tire Twister Lights Model No.: 643309E4C, 173615UK, 643309, 643309-V, 643309X1   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. P.O. No.: HKPO20000776 FCC ID: LU9643309X1TX Standard(s) : 47 CFR Part 15, Subpart C 15.249 Date of Receipt: 2020-04-20 Date of Test: 2020-04-20 to 2020-04-23 Date of Issue: 2020-04-27 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400279001 Page: 2 of 42 Revision Record Version Chapter Date Modifier Remark 01 2020-04-27 Original Authorized for issue by: Gebin Sun /Project Engineer Eric Fu /Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400279001 Page: 3 of 42 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.249 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.215 Pass Field Strength of the Fundamental Signal (15.249(a)) 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.5&6.6 47 CFR Part 15, Subpart C 15.249(a) Pass Restricted Band Around Fundamental Frequency 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 & 15.249(d) & 15.209 Pass Radiated Emissions 47 CFR Part 15, Subpart C 15.249 ANSI C63.10 (2013) Section 6.4&6.5&6.6 47 CFR Part 15, Subpart C 15.209 & 15.249 (a),(d) Pass Remark: Model No.: 643309E4C, 173615UK, 643309, 643309-V, 643309X1 Only the model 643309X1 was tested, since the electrical circuit design, layout, components used, internal wiring and functions were identical for all the above models, with only difference on model number. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM200400279001 Page: 4 of 42 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 5 4.1 DETAILS OF E.U.T. ............................................................................................................................... 5 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 5 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................... 11 6.1 ANTENNA REQUIREMENT .................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 6.1.2 Conclusion ................................................................................................................................... 11 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 12 7.1 20DB BANDWIDTH .............................................................................................................................. 12 7.1.1 E.U.T. Operation .......................................................................................................................... 12 7.1.2 Test Setup Diagram ..................................................................................................................... 12 7.1.3 Measurement Procedure and Data............................................................................................. 12 7.2 FIELD STRENGTH OF THE FUNDAMENTAL SIGNAL (15.249(A)) ............................................................... 15 7.2.1 E.U.T. Operation ........................................................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 1 of 3 Setup Photos for SZEM2004002790CR FCC ID: LU9643309X1TX SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 2 of 3 1 Photographs 1.1 Field Strength of the Fundamental Signal (15.249(a)) Test Setup 1.2 Restricted Band Around Fundamental Frequency Test Setup SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Page: 3 of 3 1.3 Radiated Emissions Test Setup