MC6TDC8200Dual-Band Tri-Mode Handset with GPS

DIGITAL WIRELESS TELEPHONE TDC-8200 User’s Guide 2 CONTENTS I. Key-map of Your Phone ............................................................................................................................................. 3 II. Indicators ................................................................................................................................................................... 4 III. Basic Functions ........................................................................................................................................................ 5 1. Turning a Phone On/Off ................................................................................................................. 5 2. Making a Call ................................................................................................................................... 5 3. Correcting Dialing Mistakes ............................................................................................................. 5 4. Answering a Call.............................................................................................................................. 5 5. Mute ................................................................................................................................................. 6 6. Redialing Last Outgoing Call ........................................................................................................... 6 7. Adjusting the Volume ....................................................................................................................... 6 IV. Main MENU............................................................................................................................................................. 7 Menu 1. My Menu ................................................................................................................................ 7 Menu 2. Phone Book ........................................................................................................................... 9 Menu 3. Call....................................................................................................................................... 16 Menu 4. Sound .................................................................................................................................. 18 Menu 5. Display ................................................................................................................................. 21 Menu 6. Utility .................................................................................................................................... 23 Menu 7. Setting.................................................................................................................................. 28 Menu 8. Message .............................................................................................................................. 33 IV. Safety Information.................................................................................................................................................. 35 1. TIA Safety Language ....................................................................................................................... 35 1) EXPOSURE TO RADIO FREQUENCY SIGNALS.............................................................................. 35 2) ANTENNA CARE .................................................................................................................................. 35 3) PHONE OPERATION ............................................................................................................................ 35 4) DRIVING ............................................................................................................................................... 35 5) ELECTRONIC DEVICES...................................................................................................................... 35 6) AIRCRAFT............................................................................................................................................. 36 7) BLASTING AREAS............................................................................................................................... 36 8) POTENTIALLY EXPLOSIVE ATMOSPHERES .................................................................................. 36 9) FOR VEHICLES EQUIPPED WITH AN AIR BAG ............................................................................. 36 2. FDA Consumer Update.................................................................................................................... 37 3. Consumer Information on SAR (Specific Absorption Rate) ............................................................. 42 4. Warning of FCC RF Exposure ......................................................................................................... 43 3 I. Key-map of Your Phone Thank you for choosing Telson TDC-8200 CDMA Wireless Phone. Here is the key-map of your phone. 4 II. Indicators Indicators Description Call signal level(displayed up to 6th level) In use. Not in service area Vibration mode when calling. Display that auto-answering was set Text message(s) Voice message(s) EMS message(s) E-mail message(s) Voice privacy is in service Digital service Display 1x service Circuit Data Service Packet Data Service Alarm set Roaming Service Remained battery WAP service in use Security mode Stopwatch Enabled 5 III. Basic Functions 1. Turning a Phone On/Off [Power On] Press END key for several seconds. [Power Off] Press END key for several seconds. 2. Making a Call [By pressing phone number] 1) Press a destination phone number. 2) Press SEND key to make a call.. [By Phonebook Entry] 1) Press a phonebook entry number and then press SEND key to make a call. 2) Find an entry number from the phonebook and then press SEND key to make a call. [By Call History] Select a number fro…

Text truncated - open the document above for the full version.

Telson Electronics Co., Ltd. 910 Sylvan Avenue, Suite 180 Englewood Cliffs, NJ 07632 Tel (201) 541-4005 Fax (201) 541-0057 April 14, 2003 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046, U.S.A. Re : TELSON ELECTRONICS CO., LTD. FCC ID: MC6TDC8200 TRI-MODE CELLULAR PHONE (CDMA/PCS/AMPS) PART 22/24 CERTIFICATIONS FCC E911 Requirements Per § 22.921 Gentlemen: Telson Electronics Co., Ltd. hereby certifies that the tri-mode cellular phone (FCC ID : MC6TDC8200), using the Automatic A/B Roaming - Intelligent Retry Method, meets the E911 requirements specified in Section 22.921 of the FCC Rules. This procedure recognizes when a "9-1-1" call is made and, at such time, will override any programming in the mobile unit that determines the handling of a non-911 call and permit the call to be handled by other analog carriers. Should you have any questions or comments concerning the above, please contact the undersigned. Sincerely Yours, Young Kim General Manager/Director, Telson Electronics USA, Inc.

Telson Electronics Co., Ltd. 910 Sylvan Avenue, Suite 180 Englewood Cliffs, NJ 07632 Tel (201) 541-4005 Fax (201) 541-0057 April 14, 2003 Re : AFFIDAVIT FOR ESN PROTECTION OF CELLULAR MOBILE TELEPHONE We hereby certify that the Handheld Portable Cellular Phone (FCC ID : MC6TDC8200) is so designed that it complies with all the requirements for ESN protection specified in Section 22.919 of the FCC Rules. a) The transmitter in service has a unique ESN. b) The ESN host component is permanently attached to a main circuit board of the mobile transmitter and the integrity of the unit operating software cannot be altered. The ESN is plated from fraudulent contact and tampering. The ESN is encoded using multiplication by a polynomial and the ESN data programmed in the memory with other information. c) The ESN is factory-set and cannot be altered, transferred, removed or otherwise able to be manipulated. Cellular mobile equipment is specifically designed such that any attempt to remove, tamper with, or change the ESN chip, its logic system, or firmware originally programmed by the manufacturer will render the mobile transmitter inoperative. Sincerely Yours, Young Kim General Manager/Director, Telson Electronics USA, Inc.

Telson Electronics Co., Ltd. 910 Sylvan Avenue, Suite 180 Englewood Cliffs, NJ 07632 Tel (201) 541-4005 Fax (201) 541-0057 May 14, 2003 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046, U.S.A. Re : TELSON ELECTRONICS CO., LTD. FCC ID: MC6TDC8200 TRI-MODE CELLULAR PHONE (CDMA/PCS/AMPS) PART 22.933 Cellular system compatibility specification Gentlemen: Telson Electronics Co., Ltd. certifies that the tri-mode cellular phone (FCC ID : MC6TDC8200) is designed in compliance with the technical specifications for compatibility of mobile and base stations in the Cellular Radio telephone Service contained in “Cellular System Mobile Station-Land Station Compatibility Specification, Office of Engineering and Technology Bulletin No. 53. Also with TIA standard as specified in OET Bulletin No. 53 Sincerely Yours, Young Kim General Manager/Director, Telson Electronics USA, Inc.

Telson Electronics Co., Ltd. 910 Sylvan Avenue, Suite 180 Englewood Cliffs, NJ 07632 Tel (201) 541-4005 Fax (201) 541-0057 April 14, 2003 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046, U.S.A. Re : TELSON ELECTRONICS CO., LTD. FCC ID: MC6TDC8200 TRI-MODE CELLULAR PHONE (CDMA/PCS/AMPS) PART 22/24 CERTIFICATIONS Request for Confidentiality Gentlemen: In accordance with 0.459 of CFR 47, Telson Electronics Co., Ltd hereby requests confidentiality of the Block Diagrams attachment, Schematic Diagrams attachment, Operational Description attachment, and Part List/Tune- Up Procedure attachment for the above-referenced Certification application. These documents contain detailed system and equipment description and related information about the product, which Telson Electronics Co., Ltd considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, Telson Electronics Co., Ltd. feels this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Sincerely Yours, Young Kim General Manager/Director, Telson Electronics USA, Inc.

From: David Chernomordik ITS/ES-Mpk Sent: Thursday, May 15, 2003 2:04 PM To: Roland Gubisch ITS/ES-Box Cc: TCB_Admin ITS/ES-Crt Subject: RE: Telson FCC ID: MC6TDC8200 Hello Roland Regarding your comments ADMINISTRATIVE 1) Cannot find DC voltage and current into final RF stage, per 2.1033(c)(8). Please indicate where this information is located, or provide. The info is included in the Part 22/24 report (page 6) 2) Cannot find Part 22H system compatibility attestation to OET-53, per 22.933. Please indicate where located, or provide. A letter from the client is attached 3) TCB certification agreement must be provided. It is attached EMC REPORT No comments. SAR REPORT 1) Please indicate if the accessory headset is metallic. I believe the headband is metallic. I don't think it can effect SAR; during the test (body SAR) the headset is far away from the phantom. But anyway, I indicated this in the SAR report (page 22). 2) Will handset operate with the clamshell shut? If so, that configuration must be tested for ear-held and body-worn positions. I received the following from the client: Our device is working only in two ways. When it works near head, the folder of the device is open When is works near body with headset, the folder of the device is closed We did the SAR test with the clamshell open for head configuration and with the clamshell shut (with headset accessory connected) for body configuration. 3) How is possible effect on SAR measurements of RF ambient assessed? A note about the ambient is inserted into report (page 24) 4) How is 15 cm liquid depth in flat phantom assessed and assured? The section "Liquid depth" is inserted into report (page 30). 5) Please provide dipole impedance match data and dimensions of dipole, per OET 65 Supplement C. The info about the impedance of the dipoles and its dimensions are inserted into report (page 23) The revised SAR and 22/24 reports are attached. They have "Revised: May 14, 2003" words on the front page. Thanks David -----Original Message----- From: Roland Gubisch ITS/ES-Box Sent: Tuesday, May 13, 2003 12:57 PM To: David Chernomordik ITS/ES-Mpk Cc: TCB_Admin ITS/ES-Crt Subject: Telson FCC ID: MC6TDC8200 David: Technical review of this application for a dual-band, tri-mode cellular handset is complete, and we note the following: ADMINISTRATIVE 1) Cannot find DC voltage and current into final RF stage, per 2.1033(c)(8). Please indicate where this information is located, or provide. 2) Cannot find Part 22H system compatibility attestation to OET-53, per 22.933. Please indicate where located, or provide. 3) TCB certification agreement must be provided. EMC REPORT No comments. SAR REPORT 1) Please indicate if the accessory headset is metallic. 2) Will handset operate with the clamshell shut? If so, that configuration must be tested for ear-held and body-worn positions. 3) How is possible effect on SAR measurements of RF ambient assessed? 4) How is 15 cm liquid depth in flat phantom assessed and assured? 5) Please provide dipole impedance match data and dimensions of dipole, per OET 65 Supplement C. Thank you, Roland

EXTERNAL PHOTO FCC ID: MC6TDC8200 EXTERNAL PHOTO FCC ID: MC6TDC8200 EXTERNAL PHOTO FCC ID: MC6TDC8200 EXTERNAL PHOTO FCC ID: MC6TDC8200 EXTERNAL PHOTO FCC ID: MC6TDC8200 EXTERNAL PHOTO FCC ID: MC6TDC8200 EXTERNAL PHOTO FCC ID: MC6TDC8200 Charger

FCC ID: MC6TDC8200 4. LCD front FCC ID: MC6TDC8200 5. LCD back

FCC ID: MC6TDC8200 5. LCD back

6. Antenna and Assembly

FCC ID: MC6TDC8200 6. Antenna and Assembly

E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ TELSONELECTRONICS CO., LTD. No. Date : 2003 / 04 / 07 PRODUCT SPECIFICATION Product : FIXED HELICAL ANTENNA Part No. : T1-1-T1-08400 Customer’s Part No. : E.M.W.AntennaCo., Ltd. proposed this document to TelsonElectronics Co., Ltd. E.M.W.ANTENNACO.,LTD. APPROVAL E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ 1. THE PRODUCT 1.1 FEATURES A fixed helical antenna system, consisting of a helical element, for use in a hand portable cellular phone unit (referred to as a handset). 1.2 PRODUCT NUMBER E.M.W.AntennaPart Number T1-1-T1-08400 1.3 UNITS AND DEFINITIONS Unless otherwise stated, SI units are used. Tx Transmit Band RxReceive Band PCB Printed Circuit Board VSWRVoltage Standing Wave Ratio Room Temperature +20 3 dBidBrelative to a isotropic CWContinuous Wave g acceleration of gravity 9.81 m/s2 E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ 2. ELECTRICAL DATA 2.1 FREQUENCY BANDS rvice Band DCN GPS US-PCS Tx (MHz) 824 849 1850 1910 Rx (MHz) 869 894 1574 1576 1930 1990 2.2 IMPEDANCE 2.2.1 Normal Value 50 2.2.1 Method E.M.W.Antennawill supply engineering assistance to get the best possiblematching of the antenna system folder open mode, other way folder close mode in cellular phone. The impedance over the frequency bands shall be as close as possible to 50after matching. Both free space and talk position are considered. E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ 2.3 VSWR The impedance matching should be optimized in the more critical talkposition, with restrictions below. 2.3.1 Free space Typical Maximum Values DCN GPS US-PCS Mode T x Rx Rx T x Rx Closed Folder 2.5 2.0 3.0 2.0 2.0 Opened Folder 2.0 2.0 3.0 2.0 2.0 2.3.2 Measuring Method A 50coaxial cable is connected (soldered) to the 50point, at the duplex-filter connection(ANT.), on the PCB. The connection of the coaxial cable shall be done to introduce a minimum of mismatch. As much as possible the coaxial cable arrangement shall prevent influences from induced currents on the cable. In the other end, the coaxial cable is connected to a network analyzer. The measurements are performed at room temperature. The handset, including the PCB, must not in any significant way differ from the mass produced handset, i.e. the antenna feeding network has to be equivalent to the network in mass production. The specification shall be met in the entire frequency band Free space means that the handset is placed on a non-conductive surface of cellular plastic. Talk position means that the handset is held in the left hand to the left ear with the microphone directed towards the mouth. 2.4 GAIN(dBi) 2.4.1 Typical Minimum Values in Maximum Direction DCN GPS US-PCS Mode T x Rx Rx T x Rx Closed Folder -3.5 -2.0 0 2.0 2.0 Opened Folder -1.0 0 0 1.0 1.0 2.4.2 Measuring Method The connection is done according 2.4.2. Radiation patterns are measured at 6 different frequencies : Txmin,Txmid,Txmax:Rxmin, Rxmid,andRxmax. The antenna is measure in 2 orthogonal E-planes(XZPlane(E1), YZPlane(E2)) in free space, according to figure 2.4.2 (b). The antenna is also measured in the H-plane as well as in talk position. E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ (a) Coordinate system for the cellular phone (b) E-Plane Figure 2.4.2 Gain Test into phone 2.5 POWER RATING 2.5.1 Maximum Value P = 2W(CW) 2.5.2 Demands No visual deterioration shall occur during the test. The antenna shall satisfy the electrical demands, according to 2.4.1, after the test. 2.5.3 Measuring Method The connection is according to 2.4.2. The specified power, P, is applied for 10 minutes at room temperature. E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ 3. MECHANICAL DATA 3.1 APPEARANCE The appearance shall be according to the specification drawing on page 15. The antenna shall have no marks, cuts, abrasion or other mechanical damages. 3.2 HELIX DEFORMATION 3.2.1 Angle = 30 3.2.2 Bending Force Fb= 40N 3.2.3 Demands No visual deterioration shall occur, and the fitting and plastic shall remain mechanically bonded, during the test. The antenna shall satisfy the electrical demands, according to 2.4.1, after the test. 3.2.4 Measuring Method The antenna is assembled to the test equipment according to figure 3.2.4. A force is applied perpendicular to the antenna 1/3 of "A" length belowthe top of the helix. The antenna is bent until the specified angle, or the specified force, Fbis reached. Figure 3.2.4. Helix Deformation 3.3 TORQUE 3.3.1 Minimum Value T = 30N 3.3.2 Demands No visual deterioration shall occur, and the fitting and plastic shall remain mechanically bonded, during the test. The antenna shall satisfy the electrical demands, according to 2.4.1, after the test. 3.3.3 Measuring Method The antenna is assembled to the test equipment. A torque instrument is attached to the helical antenna. The antenna is exposed to the specified torque, T, between fitting and plastic in clockwise direction according to figure 3.3.3. E.M.W ANTENNA Co., LTD. ________________________________________________________________________________________________ Figure 3.3.3. Torque 3.4 DROP 3.4.1 Drops 1 drop (3cycles) 3.4.2 Drop Height 1.5 m 3.4.3 Drop Angle 180 3.4.4 Actual Phone applyed 1 drop (3cycles) 3.4.5 Demands The original shape shall be possible to restore. The antenna shall satisfy the electrical demands, according to 2.4.1, after the test. 3.4.6 Measuring Method The antenna is attached to the handset or an equivalent test fixture. The handset is dropped with the antenna downwards onto a metal plates of 110.05m 3 . E.M.W ANTENNA Co., LT…

Text truncated - open the document above for the full version.

For Telson Electronics USA, Inc. On the Dual Band Tri-mode CDMA Handset Model Number: TDC-8200 FCC m: MC6TDC8200 Test Report: 30414481 Date of Report: Apri128, 2003 Revised: May 14,2003 Job #: 3041448 Date of Test: April 14 to 23,2003 Warnock Herse --- .ie- ..0' ...6. .. 'm ~" en"K: Intertek Testing Services NA, Inc. 1365 Adams Court, Menlo Park, CA 94025 Telephone 650-463-2900 Fax 650-463-2910 Home Page www.etlsemko.com 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 23, 2003 FCC ID: MC6TDC8200 File: 30414481 Page 2 of 37 RSS-102 & FCC Part 2 SAR Evaluation TABLE OF CONTENTS STATEMENT OF COMPLIANCE .......................................................................................................... 3 1.0 JOB DESCRIPTION ..................................................................................................................... 4 1.1 Client Information............................................................................................................... 4 1.2 Equipment under test (EUT) ............................................................................................... 4 1.3 Test Plan Reference ............................................................................................................5 1.4 System Test Configuration ................................................................................................. 5 1.4.1 System Block Diagram & Support equipment....................................................... 5 1.4.2 Test Position for Brain ........................................................................................... 6 1.4.3 Test Position for Muscle ........................................................................................ 8 1.4.4 Test Condition ....................................................................................................... 9 1.5 Modifications required for compliance............................................................................... 9 1.6 Additions, deviations and exclusions from standards ......................................................... 9 2.0 SAR EVALUATION ................................................................................................................... 10 2.1 SAR Limits ....................................................................................................................... 10 2.2 Configuration Photographs ............................................................................................... 11 2.3 System Verification .......................................................................................................... 23 2.4 Evaluation Procedures ...................................................................................................... 23 2.5 Test Results....................................................................................................................... 24 3.0 TEST EQUIPMENT.................................................................................................................... 28 3.1 Equipment List..................................................................................................................28 3.2 Tissue Simulating Liquid.................................................................................................. 29 3.3 Liquid depth ...................................................................................................................... 31 3.4 Probe Calibration ..............................................................................................................31 3.5 Measurement Uncertainty ................................................................................................. 32 3.6 Measurement Tractability ................................................................................................. 33 4.0 WARNING LABEL INFORMATION - USA........................................................................... 34 5.0 REFERENCES............................................................................................................................. 35 6.0 DOCUMENT HISTORY ............................................................................................................ 36 APPENDIX A - SAR Evaluation Data .................................................................................................... 37 APPENDIX B - E-Field Probe Calibration Data ................................................................................... 37 APPENDIX C – Phantom Certificate ..................................................................................................... 37 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 23, 2003 FCC ID: MC6TDC8200 File: 30414481 Page 3 of 37 RSS-102 & FCC Part 2 SAR Evaluation STATEMENT OF COMPLIANCE The Dual Band Tri-mode CDMA Handset, FCC ID: MC6TDC8200 was evaluated for SAR in accordance with the requirements for RF Exposure compliance testing defined in FCC OET Bulletin 65, Supplement C (Edition 01-01). Testing was performed at the Intertek Testing Services facility in Menlo Park, California. For the evaluation, the dosimetric assessment system DASY3 was used. The phantom employed was the "SAM Twin Phantom". The total uncertainty for the evaluation of the spatial peak SAR values averaged over a cube of 1g tissue mass had been assessed for this system to be ±27.8%. The device was tested at its maximum output power declared by the Telson Electronics USA, Inc. In summary, the maximum spatial peak SAR value for the sample device averaged over 1g was found to be: Mode Position Frequency SAR 1g , mW/g AMPS Right Hand Touch 824.04 1.28 AMPS 1.5 cm from Phantom 824.04 0.639 In conclusion, the tested sample device was found to be in compliance with the requirements defined in OET Bulletin 65, Supplement C (Edition 01-01) for held to ear and bod…

Text truncated - open the document above for the full version.

1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 1 of 38 RSS-102 & FCC Part 2 SAR Evaluation APPENDIX A - SAR Evaluation Data Please note that the graphical visualization of the phone position onto the SAR distribution gives only limited information on the current distribution of the device, since the curvature of the head results in graphical distortion. Full information can only be obtained either by H-field scans in free space or SAR evaluation with a flat phantom. Power drift is the measurement of power drift of the device over one complete SAR scan. 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 2 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 3 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 4 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 5 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 6 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 7 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 8 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 9 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 10 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 11 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 12 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 13 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 14 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telson Electronics USA, Inc.., Model No: TDC-8200 Date of Test: April 14 to 17, 2003 FCC ID: MC6TDC8200 File: 30414481 – Apendix A Page 15 of 38 RSS-102 & FCC Part 2 SAR Evaluation 1365 Adams Court, Menlo Park, CA 94025 Telso…

Text truncated - open the document above for the full version.