MCLJ20H058WiFi Module

1 U S E R ’ S M A N U A L J20H058 USB2.0 WLAN CARD 2 Contents SECTION ONE: INTRODUCTION ............................................................................................ 3 1.INTRODUCTION ................................................................................................................................ 3 1.1 SCOPE ........................................................................................................................................... 3 1.2 FUNCTION ...................................................................................................................................... 3 2.PRODUCT SPECIFICATION ........................................................................................................... 4 2.1 HARDWARE SPECIFICATION .......................................................................................................... 4 3. PRODUCT REQUIREMENTS ......................................................................................................... 5 3.1 HARDWARE REQUIREMENTS ......................................................................................................... 5 3.2 HARDWARE ARCHITECTURE ......................................................................................................... 5 SECTION TWO: WINDOWS XP WIRELESS UTILITY AND INSTALL ............................. 6 The information contained in this manual has been verified at the time of this manual printing. The manufacturer reserves the right to make any changes and improvements in the product described in this manual at any time and without notice. All registered trademarks are the property of their respective owners. HON HAI PRECISION IND. CO., LTD. 3 Section one: Introduction 1.Introduction Project Name: 802.11b/g/n (1x1) card based on IC Realtek RTL8188(CTV) with QFN package. 802.11b/g/n module provides wireless modem functionality utilizing direct sequence spread spectrum and OFDM/CCK technology. The typical use model for this embedded device is to allow the host device to be connected to an 802.11b/g/n 1x1 wireless network with infrastructure mode or to serve as an ad-hoc (peer-to-peer) data path. 1.1 Scope The Wireless Realtek RTL8188(CTV) available 11n solution in the 2.4-GHz band, compatible with the IEEE 802.11b standard , 802.11g standard and 11n standard. The 802.11g data rate provides for 54, 48, 36, 24, 18, 12, 9, 6Mbps, and 802.11b data rate provides for 11, 5.5, 2, 1Mbps. In addition, 11n provide 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65, 72.2Mbps for HT20. 15, 30, 45, 60, 90, 120, 135, 150Mbps for HT40. 1.2 Function • RoHS and Green Compliant. • 802.11b/g/n 1x1 based on Realtek RTL8188(CTV) IC • Modulation type: DBPSK, DQPSK and CCK with 802.11b mode. OFDM, QPSK, BPSK, 16-QAM, and 64-QAM with 802.11g/n mode. • USB 2.0 Interface, High and Full Speeds supported. • Module is powered by the host with a 5.0V +/- 10% supply (300mVpp ripple). • Module’s clock source is provided by the on board XTAL Oscillator of 40 MHz (+/- 10ppm). • Module connected to motherboard with approximately 10cm cable. • Unit dependent RF parameters are programmed into each module EEPROM at production test time by the manufacturer. HON HAI PRECISION IND. CO., LTD. 4 2.Product Specification 2.1 Hardware Specification Wireless LAN Standards IEEE802.11b/g/n compatible ARIB STD-T66 compatible ETSI 300.328 compatible FCC 15.247 compatible FCC 15.407 compatible Operating Frequency 2.400~2.4835GHz Channel Numbers 1~11 channels active 12,13 channels passive 14 channels no need WLAN Data Rate 802.11g: 54Mbps with fall back of 48, 36, 24, 18, 12, 9, 6Mbps. 802.11b: 11Mbps with fall back rates of 5.5, 2, and 1Mbps 11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps for HT20 Transmitter Output Power Typical 16dBm for 11b Typical 14dBm for 11g Typical 13dBm for HT20/40 Receiver Sensitivity (ANT2) Typical –73dBm for MCS7 (HT20) @10%PER Typical –93dBm for MCS0 (HT20) @10%PER Typical –76dBm for 54Mbps @ 10% PER Typical –91dBm for 6Mbps @ 10% PER Typical –89dBm for 11Mbps @ 8% PER Typical –96dBm for 1Mbps @ 8% PER Receiver Sensitivity (ANT1) Typical –69dBm for MCS7 (HT20) @10%PER Typical –89dBm for MCS0 (HT20) @10%PER Typical –72dBm for 54Mbps @ 10% PER Typical –87dBm for 6Mbps @ 10% PER Typical –85dBm for 11Mbps @ 8% PER Typical –92dBm for 1Mbps @ 8% PER HON HAI PRECISION IND. CO., LTD. 5 3. Product Requirements 3.1 Hardware Requirements Host Interface USB 2.0 PCB 2-layer FR4 Antenna port: ANT1 for TX/RX , ANT2 for RX Diversity 3.2 Hardware Architecture This specification describes an embedded 802.11b/g/n WiFi interface PCA ‘module’ for embedded device products. The module has two on-board connector. This module is powered from the host (5.0V) and interfaces to the host with USB 2.0 signals. No switches, indicators or related user interface signals are provided on this module. An on-board 40 MHz XTAL is included. PIN DEFINE HON HAI PRECISION IND. CO., LTD. 6 Section Two: Windows XP Wireless Utility and install 1. Open your Install Programs files folder or InstallCD and double Clicked the file named“setup.exe”. 2. You can choose the language and see next interface, press “next” HON HAI PRECISION IND. CO., LTD. 7 3. Read the license agreement of Realtek and select “accept”(or you will can not use the program),then click“next” HON HAI PRECISION IND. CO., LTD. 8 4. In the next interface you can select the setup type that best suits your needs 5. You will see next two interfaces and they will direct you to select the the destination location. 6. you can see this interface and the note will tell you how to select in the second interface. HON HAI PRECISION IND. CO., LTD. 9 7. The program will reboot the system before working, and click“ yes” 8. Install driver now 9. Install completely and restart computer HON HAI PRECISION IND. CO., LTD. 10 HON HAI PRECISION IND. CO., LTD. 11 4.FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two co…

Text truncated - open the document above for the full version.

HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date: 2012/4/11 GENERAL DECLARATION We, HON HAI PRECISION IND. CO., LTD. declare that the device does not support any non-US channels in all the operational mode(s) for the following product. FCC ID: MCLJ20H058 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Signature: Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: [email protected]

HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date:2012/4/11 FCC ID: MCLJ20H058 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: [email protected]

HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Federal Communications Commission Authorization and Evaluation Division Date: April 16, 2012 Confidentiality Request FCC ID: MCLJ20H058 Pursuant to DA 04-1705 of the Commission’s Rules, we request short-term confidential treatment for the following information until June. 20, 2012 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device External Photos Test Setup Photos User’s Manual Internal Photo Thank you! Sincerely yours, ------------------------------------------------------- Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: [email protected]

HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. AGENCY AUTHORIZATION LETTER Date: 2012/4/11 To whom it may concern: We, the undersigned, , HON HAI PRECISION IND. CO., LTD. hereby authorize Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. of Taiwan to act on our behalf in all matters relating to all processes required in the FCC Part 15C approval and any communication needed with the national authority. Any and all acts carried out by Bureau Veritas Consumer Products Services (H.K) Ltd., Taoyuan Branch. on our behalf shall have the same effects as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Sincerely yours, Signature: Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: [email protected]

FCC ID: MCLJ20H058 Report No.: RF120329E10 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch April 27, 2012 Dear Application Examiner, HON HAI Precision Ind. Co., Ltd., device: a WiFi Module, FCC ID: MCLJ20H058 would like to have your authorization as a modular device. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.”: The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data input. It is integrated in chip RTL8188CTV QFN46. 3. “The modular transmitter must have its own power supply regulation.” The part number of this regulator is RTL8188CTV QFN46. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was tested in a stand-alone configuration via extender. Please see section Photographs of Test Configuration in the test report, the EUT was plugged in this extender. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: MCLJ20H058 Report No.: RF120329E10 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, signature Hank Chung Assistant Manager Bureau Veritas Consumer Products Services (H.K.) Ltd., Hsinchu Branch

Report No.: 120329E10 1 CONSTRUCTION PHOTOS OF EUT

500.01446.005 K31I169/11 3123/14/19 PTT label Jenny xie Jenny xie First Release Scale: 1:1 Scale: 3:1 ! ! Model Name ! J20H058 ! CE Mark ! CE and NB Number ! FCC ID ! IC Number ! Applicant Name ! HON HAI Precision IND. CO.,LTD. Foxconn ! Coutry ! Origin ! MADE IN CHINA ! Made in China ! Sony Part Number ! 1 . 458 . 555 . 11 ! MAC ! Serial Number ! Date/Line/Serial Number ! Number and QR ! Code ! Value Item Description QR code: 1.Barcode size: ± 5*5mm 2.Barcode content:(no blank) AAAAAAAAAAAAXXXXXXXX-VVSS-HH YYMMDDLLZZZZ XXXXXXXX :Foxconn Mo No VV : the engineering version (refer to Foxconn label Rev in the cover of the MFG document) SS : the version of A300/A400 product (refer to Doc Rev.in the cover of MFG document)HH : HW version,use the last two digits of PCB Rev. “XXXXXXXX-VVSS-HH” Serial No.:YYMMDDLLZZZZ YY.: Year(2012=>12) MM: Month(range 01-12) DD: day(range 01-31) LL: Line Name(range 01-xx)( ⬅30ᦤկ ) ZZZZ: Serial number(0001-9999, decimalist, reset from 0001 every day.) Label location MAC value,total 12 digit. Model:J20H058 FCC ID: XXXXXXXXXXIC: XXXXX-XXXXXXX 1-458-555-11 YYMMDDLLZZZZ MADE IN CHINA HON HAI Precision IND. CO.,LTD.MAC:XXXXXXXXXXXXXXXXXXXX-VVSS-HH 50#Mylar(matte white) 1.5mm 1.5mm 1.5mm 1.2mm 1.2mm 1.2mm 1.2mm Serial No.,total 12 digit. Model:J20H058 FCC ID: XXXXXXXXXX IC: XXXXX-XXXXXXX 1-458-555-11 YYMMDDLLZZZZ MADE IN CHINA HON HAI Precision IND. CO.,LTD. MAC:XXXXXXXXXXXX XXXXXXXX-VVSS-HH Model:J20H058 FCC ID: XXXXXXXXXXIC: XXXXX-XXXXXXX 1-458-555-11 YYMMDDLLZZZZ MADE IN CHINA HON HAI Precision IND. CO.,LTD.MAC:XXXXXXXXXXXXXXXXXXXX-VVSS-HH MAC:XXXXXXXXXXXX follow foxconn rule, ϔן⫶કՓ⫼ϔ0$ן&

(Fig. 1) FCC ID: MCLJ20H058 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

Report No.: 120329E10 2

FCC ID: MCLJ20H058 Report No.: RF120329E10 Operational Description This device is a WiFi Module, which operates in the 2.4GHz frequency spectrum with throughput of up to150Mbps which OFDM technique will be applied. If the signal to noise radio is too poor which could not support 150Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by 5Vdc from host equipment. The antenna is PCB Print antenna without antenna connectors. The other instruction, please have a look at the users manual.

Report No.: SA120329E10 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 1 RF EXPOSURE REPORT REPORT NO.: SA120329E10 MODEL NO.: J20H058 FCC ID: MCLJ20H058 RECEIVED: Mar. 29, 2012 TESTED: Apr. 17, 2012 ISSUED: Apr. 26, 2012 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This test report consists of 6 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced, except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval or endorsement by any government agency. The test results in the report only apply to the tested sample. Report No.: SA120329E10 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 2 TABLE OF CONTENTS RELEASE CONTROL RECORD.....................................................................................3 1. CERTIFICATION......................................................................................................4 2. RF EXPOSURE LIMIT..............................................................................................5 3. MPE CALCULATION FORMULA.............................................................................5 4. CLASSIFICATION....................................................................................................5 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER...........................6 Report No.: SA120329E10 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 3 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA120329E10 Original release Apr. 26, 2012 Report No.: SA120329E10 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 4 1. CERTIFICATION PRODUCT: WiFi Module BRAND NAME: Foxconn MODEL NO.: J20H058 TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Hon Hai PRECISION IND.CO.,LTD TESTED DATE: Apr. 17, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: J20H058) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Sep. 15, 2011 ( Lori Chung, Specialist ) APPROVED BY : , DATE: Sep. 15, 2011 ( May Chen, Deputy Manager ) Report No.: SA120329E10 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 5 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA120329E10 Report Format Version 4.0.0 Cancels and replaces the report No.: SA110718E01 dated Aug. 19, 2011 6 5. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For WLAN: 15.247(2.4GHz) FREQUENCY BAND (MHz) CONDUCTED POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 309.030 1.5 20 0.087 1.00 ---END---

Report No.: RF120329E10 1 Report Format Version 4.2.0 Reference No.: 110719E01, 120110E14 FCC TEST REPORT REPORT NO.: RF120329E10 MODEL NO.: J20H058 FCC ID: MCLJ20H058 RECEIVED: Mar. 29, 2012 TESTED: Apr. 04 to 20, 2012 ISSUED: Apr. 26, 2012 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1, Hsin-An Road, Hsinchu, Science Industrial Park, Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This test report consists of 52 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF120329E10 2 Report Format Version 4.2.0 Reference No.: 110719E01, 120110E14 Table of Contents RELEASE CONTROL RECORD........................................................................................4 1. CERTIFICATION....................................................................................................5 2. SUMMARY OF TEST RESULTS............................................................................6 2.1 MEASUREMENT UNCERTAINTY..........................................................................7 3. GENERAL INFORMATION.....................................................................................8 3.1 GENERAL DESCRIPTION OF EUT.......................................................................8 3.2 DESCRIPTION OF TEST MODES.......................................................................10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........................11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................................13 3.4 DESCRIPTION OF SUPPORT UNITS..................................................................14 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................................14 4. TEST TYPES AND RESULTS..............................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT........................................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................................15 4.1.2 TEST INSTRUMENTS..........................................................................................15 4.1.3 TEST PROCEDURES..........................................................................................16 4.1.4 DEVIATION FROM TEST STANDARD.................................................................16 4.1.5 TEST SETUP.......................................................................................................17 4.1.6 EUT OPERATING CONDITIONS.........................................................................17 4.1.7 TEST RESULTS...................................................................................................18 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT................................20 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT..............20 4.2.2 TEST INSTRUMENTS..........................................................................................21 4.2.3 TEST PROCEDURES..........................................................................................23 4.2.4 DEVIATION FROM TEST STANDARD.................................................................23 4.2.5 TEST SETUP.......................................................................................................24 4.2.6 EUT OPERATING CONDITIONS.........................................................................24 4.2.7 TEST RESULTS...................................................................................................25 4.3 6dB BANDWIDTH MEASUREMENT....................................................................38 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT..................................................38 4.3.2 TEST INSTRUMENTS..........................................................................................38 4.3.3 TEST PROCEDURE.............................................................................................38 4.3.4 DEVIATION FROM TEST STANDARD.................................................................38 4.3.5 TEST SETUP.......................................................................................................38 4.3.6 EUT OPERATING CONDITIONS.........................................................................38 4.3.7 TEST RESULTS...................................................................................................39 4.4 CONDUCTED OUTPUT POWER MEASUREMENT............................................40 4.4.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....................40 4.4.2 INSTRUMENTS....................................................................................................40 4.4.3 TEST PROCEDURES..........................................................................................40 Report No.: RF120329E10 3 Report Format Version 4.2.0 Reference No.: 110719E01, 120110E14 4.4.4 DEVIATION FROM TEST STANDARD.................................................................40 4.4.5 TEST SETUP.......................................................................................................40 4.4.6 EUT OPERATING CONDITIONS.........................................................................40 4.4.7 TEST RESULTS............................................…

Text truncated - open the document above for the full version.