MCLT77H134WLAN & Bluetooth combo module

HON HAI Precision Ind. Co., Ltd.

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Jan 17, 2010
Application Purpose: Original Equipment
Date of Application: Jan 17, 2010
Equipment Note: WLAN & Bluetooth combo module
Frequency Range: 2412.00000000 - 2462.00000000
Company: HON HAI Precision Ind. Co., Ltd.
Country: Taiwan

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

MARVELL 88W8688 Mini-Module (IEEE 802.11b/g+BT 2.1 EDR) Marketing Requirements Specification T77H134.00 < REV.05> Prepared by Reviewed by Approved by Plum Feng Robin Xu Chang-fu Lin WLAN & BT combo module WLAN and Bluetooth combo module CONTENTS 0. REVISION HISTORY..............................................................................................................................................3 1. INTRODUCTION..........................................................................................................................................................4 1.1 SCOPE......................................................................................................................................................................4 1.2 FUNCTION.................................................................................................................................................................4 1.3 ENVIRONMENTAL......................................................................................................................................................4 2 PRODUCT SPECIFICATION......................................................................................................................................5 2.1 HARDWARE SPECIFICATION.....................................................................................................................................5 3. PRODUCT REQUIREMENTS....................................................................................................................................6 3.1 HARDWARE REQUIREMENTS....................................................................................................................................6 3.2 HARDWARE ARCHITECTURE....................................................................................................................................6 3.3 MECHANICAL OUTLINE DRAWING.............................................................................................................................7 3.4 LAND GRID ARRAY...................................................................................................................................................8 3.5 SOFTWARE REQUIREMENTS..................................................................................................................................10 0. Revision History Date Change Note REV Note Nov. 11, 2008 Rev.01 0 Dec. 19, 2008 Rev.02 Update dimension of module Apr. 28, 2009 Rev.03 Change the pin-define Oct. 13.2009 Rev.04 Change the height of shielding Oct. 27.2009 Rev.05 Change the mechanical spec of shielding 1. Introduction Project Name: Mini-Module (802.11b/g + BT Module) based on Marvell IC 88W8688 with TFBGA package. This documentation describes the Engineering requirements specification of the WLAN (802.11b/g) +Bluetooth 2.1 EDR Mini-Module. It is a confidential document of FOXCONN. 1.1 Scope The Wireless MARVELL 88W8688BFL Mini-Module is designed to support 802.11g data rate of 54, 48, 36, 24, 18, 12, 9, 6Mbps, and as well as 802.11b data rate of 11, 5.5, 2, 1Mbps for WLAN operation. In addition, this module is Bluetooth 2.1+Enhanced Data Rate (EDR) compliant which provide 1, 2 and 3Mbps data rate. 1.2 Function Compatible with IEEE 802.11b/g standard and Bluetoothv2.1+EDR standard Ultra low-power dissipation Support external power down mode Support Marvell Wi-Fi/Bluetooth coexistence Support the IEEE 802.11i security standard through implementation of the Advanced Encryption Standard (AES)/ Counter Mode CBC-Mac Protocol (CCMP) and WEP security mechanisms. Also supports Internet Protocol Security (IPSce) with DES/3DES/AES encryption and MD5/SHA-1 authentication. Host interface supports for SDIO/ G-SPI, PCM/I2S Codec interface for multimedia application Host interface supports for SDIO/ G-SPI, PCM/I2S Codec interface for multimedia application 1.3 Environmental Ambient Temperature (operation) = -10 to +75 Degrees Celsius. Product storage temperature = -40 to +85 Degrees Celsius. 2 Product Specification 2.1 Hardware Specification 2.1.1 WLAN Wireless LAN Standards IEEE 802.11g standard and IEEE 802.11b Operating Frequency 2.412~2.484GHz Channel Numbers 11 channels for United States 13 channels for Europe Countries 14 channels for Japan WLAN Data Rate 802.11g: 54Mbps with fall back of 48, 36, 24, 18, 12, 9, 6Mbps. 802.11b: 11Mbps with fall back rates of 5.5, 2, and 1Mbps Modulation Schemes 802.11g: 64QAM (54Mbps, 48Mbps), 16QAM (36Mbps, 24Mbps), QPSK (18Mbps, 12Mbps), BPSK (9Mbps, 6Mbps) 802.11b: CCK (11 Mbps, 5.5Mbps), DQPSK (2 Mbps), DBPSK (1 Mbps) Transmitter Output Power Typical 14dBm for 54, 48, 36, 24, 18, 12, 9, 6Mbps Typical 15dBm for 11, 5.5, 2, 1Mbps EVM 802.11b @11Mbps_14dBm (8%dB@peak) 802.11g @54Mbps_14dBm (-26dB@average) Receiver Sensitivity Typical –72dBm for 54Mbps @ 10% PER Typical –74dBm for 48Mbps @ 10% PER Typical –81dBm for 36Mbps @ 10% PER Typical –83dBm for 24Mbps @ 10% PER Typical –86dBm for 18Mbps @ 10% PER Typical –88dBm for 12Mbps @ 10% PER Typical –88dBm for 9Mbps @ 10% PER Typical –88dBm for 6Mbps @ 10% PER Typical –88dBm for 11Mbps @ 8% PER Typical –90dBm for 5.5Mbps @ 8% PER Typical –92dBm for 2Mbps @ 8% PER Typical –93dBm for 1Mbps @ 8% PER Media Access Protocol CSMA/CA with ACK 2.1.2 Bluetooth Radio Technology FHSS Operating Frequency 2402 ~ 2480MHz ISM band Channel Numbers 79 channels with 1MHz BW Transmitter Output Power -6~ +4dBm output power for class2 Receiver Sensitivity -80dBm @ GFSK 0.1% BER, 1Mbps Maximum Receiver Signal -20dBm and Taiwan. 11b : 22 dBm 11g : 25 dBm - 3. Product Requirements 3.1 Hardware Requirements Form factor LGA Host Interface SDIO PCB 6-layer FR4 Antenna port: One BT RF port and One Wi-Fi RF port 3.2 Hardware Architecture The module design is based on the MARVELL 88W8688BFL single chip which implements IEEE802.11b/g and Bluetooth 2.1+EDR. Figure 1 Functional Block Diagram MARV…

Text truncated - open the document above for the full version.

Cover Letter(s)

HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date:2009/11/17 FCC ID: MCLT77H134 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: [email protected]

Cover Letter(s)

! "#$%&'()())* !!"# !" # $% & + & % & '( $)* + , - & . , - . / / - 0 1 $ !!"#$#%&!'(&% )* !!"#$#%&&%+,, # -./ Pursuant to DA 04-1705 of the Commission's Rules, we request short-term confidential treatment for the following information until March. 10, 2010 of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

Cover Letter(s)

HON HAI PRECISION IND. CO., LTD. 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. Date: 2009/11/17 G E N E R A L D E C L A R A T I O N We, HON HAI PRECISION IND. CO., LTD. declares that device does not have “Ad Hoc on non-US frequencies” while applying for the follow product. FCC ID: MCLT77H134 If you have any questions regarding the authorization, please don’t hesitate to contact us. Thank you! Signature: Rio Chen Compliance Manager HON HAI PRECISION IND. CO., LTD. TEL: +886-3-5784975 FAX: +886-3-5775100 E-mail: [email protected]

Cover Letter(s)

FCC ID: MCLT77H134 Report No. : RF981102H02 Modular Approval Request Letter Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Dec. 14, 2009 Dear Application Examiner, Hon Hai PRECISION IND.CO.,LTD’s WLAN and BT combo module, FCC ID: MCLT77H134, would like to have your authorization as a modular approval. The requirements of section 15.212 of FCC rules have been met and shown on the following statements. 1. “The modular transmitter must have its own RF shielding.” The radio portion of this module has been shielded, please see exhibition External Photo. 2. “The modular transmitter must have buffered modulation/data inputs.” The EUT has buffered data inputs, it is integrated in chip 88W8688. 3. “The modular transmitter must have its own power supply regulation.” The modular transmitter has its own power supply regulation built in 88W8688. 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The spurious emission, unique antenna connector and photo of antennas are shown in the test report. 5. “The modular transmitter must be tested in a stand-alone configuration” The EUT was placed on an extended card which connected to Notebook Computer as a stand-alone configuration. The EUT was tested via the outside a Notebook Computer. Please see section Photographs of Test Configuration in the test report. 6. “The modular transmitter must be labeled with its own FCC ID number.” Please see exhibition Label Sample for the FCC ID of this module. And also in the exhibition Users Manual, there are instructions give to the OEM on how to label the end product. FCC ID: MCLT77H134 Report No. : RF981102H02 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements.” The EUT is compliant with all applicable FCC rules. Detail instructions for maintaining compliance are given in the Users Manual. 8. “The modular transmitter must comply with any applicable RF exposure requirements.” The EUT is compliant with all applicable RF exposure requirements. RF Exposure is addressed in the RF exposure exhibition. Please contact me if you have any further questions. Thanks for your attention. Best Regards, May Chen Deputy Manager of Hsinchu Certification Service Div. Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch

Cover Letter(s)

External Photos

Page 1 CONSTRUCTION PHOTOS OF EUT

ID Label/Location Info

(Fig. 1) FCC ID: MCLT77H134 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Label

ID Label/Location Info

HON HAI Precision Ind. Co., Ltd. Foxconn T77H134 MCLT77H134

Internal Photos

Page 2 Page 3 PCB Printed antenna Page 4 PIFA antenna Page 5 Page 6

Operational Description

FCC ID: MCLT77H134 Report No. RF981102H02 Operational Description This device is a WLAN and Bluetooth combo module, the maximum data rate could be up to 54Mbps which OFDM technique will be applied. If the signal to noise rate is too poor which could not support 54Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of EUT (WLAN and BT combo module) is powered by host equipment. There are two sets of antennas (four antennas) provided to this EUT, please refer to the following table: Set No. Antenna Type Net Gain (dBi) include cable loss Cable Loss (dBi) Cable Length Antenna Connector Note 1 3.37 NA NA For WLAN use A 2 PCB Printed 3.37 NA NA For BT use 3 4.51 1.083 380mm For WLAN use B 4 PIFA 3.51 1.112 390mm NA For BT use Per co-transmitting policy, the WLAN and Bluetooth combo module was tested for conducted and radiated emissions in restricted bands while transmitting on both 2.4 GHz and bluetooth at simultaneously. The other instruction, please have a look at the users manual.

RF Exposure Info

Report No.: SA981102H02 1 Report Format Version 3.0.0 RF EXPOSURE REPORT REPORT NO.: SA981102H02 MODEL NO.: T77H134 ACCORDING: FCC Guidelines for Human Exposure IEEE C95.1 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan Report No.: SA981102H02 2 Report Format Version 3.0.0 RF Exposure Measurement 1. Introduction In this document, we try to prove the safety of radiation harmfulness to the human body for our product. The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The Gain of the antenna used in this product is measured in a Fully Anechoic Chamber (FAC) calibrated for antenna measurement in our lab, and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis transmission formula is a far field assumption, the calculated result of that is an over-prediction for near field power density. We will take that as the worst case to specify the safety range. 2. RF Exposure Limit According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) (A)Limits For Occupational / Control Exposures 300-1500 ... ... F/300 6 1500-100,000 ... ... 5 6 (B)Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz Report No.: SA981102H02 3 Report Format Version 3.0.0 3. Friis Formula Friis transmission formula : Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1 mW/cm 2 . If we know the maximum Gain of the antenna and the total power input to the antenna, through the calculation, we will know the MPE value at distance 20cm. Ref. : David K. Cheng, Field and Wave Electromagnetics, Second Edition, Page 640, Eq. (11-133). 4. EUT Operating condition The software provided by Manufacturer enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 5. Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance with the antenna should be included in users manual. So, this device is classified as Mobile Device Report No.: SA981102H02 4 Report Format Version 3.0.0 6. Test Results 6.1 Antenna Gain There is one antenna provided to this EUT, please refer to the following table: No. Gain (dBi) Antenna Type Connector 1 3.37 PCB Printed U.FL-R-SMT connector 6.2 Output Power Into Antenna & RF Exposure value at distance 20cm: For Part 802.11b: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 162.200 0.070 1.0 6 2437 97.700 0.042 1.0 11 2462 141.300 0.061 1.0 For Part 802.11g: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 1 2412 199.500 0.086 1.0 6 2437 323.600 0.140 1.0 11 2462 199.500 0.086 1.0 Report No.: SA981102H02 5 Report Format Version 3.0.0 For Bluetooth: Channel Channel Frequency (MHz) Output Power to Antenna (mW) Power Density (mW/cm 2 ) Limit of Power Density (mW/cm 2 ) 0 2402 0.400 0.0002 1.0 CONCLUSION: Both of the WLAN and bluetooth can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.140 / 1 + 0.0002 / 1= 0.1402, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Test Report

Report No.: RF981102H02-1 1 Report Format Version 3.0.0 FCC TEST REPORT (Bluetooth) REPORT NO.: RF981102H02-1 MODEL NO.: T77H134 RECEIVED: Nov. 02, 2009 TESTED: Nov. 16, 2009 to Jan. 08, 2010 ISSUED: Jan. 13, 2010 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan This test report consists of 84 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF981102H02-1 2 Report Format Version 3.0.0 TABLE OF CONTENTS 1. CERTIFICATION.........................................................................................4 2. SUMMARY OF TEST RESULTS.................................................................5 2.1 MEASUREMENT UNCERTAINTY....................................................................6 3. GENERAL INFORMATION..........................................................................7 3.1 GENERAL DESCRIPTION OF EUT.......................................................7 3.2 DESCRIPTION OF TEST MODES.........................................................9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL........10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS.......................12 3.4 DESCRIPTION OF SUPPORT UNITS..................................................13 3.5 CONFIGURATION OF SYSTEM UNDER TEST...................................14 4. TEST TYPES AND RESULTS...................................................................15 4.1 CONDUCTED EMISSION MEASUREMENT........................................15 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT......................15 4.1.2 TEST INSTRUMENTS..........................................................................15 4.1.3 TEST PROCEDURES..........................................................................16 4.1.4 DEVIATION FROM TEST STANDARD.................................................16 4.1.5 TEST SETUP.......................................................................................16 4.1.6 EUT OPERATING CONDITIONS.........................................................17 4.1.7 TEST RESULTS...................................................................................18 4.2 NUMBER OF HOPPING FREQUENCY USED.....................................20 4.2.1 LIMIT OF HOPPING FREQUENCY USED...........................................20 4.2.2 TEST INSTRUMENTS..........................................................................20 4.2.3 TEST PROCEDURES..........................................................................20 4.2.4 DEVIATION FROM TEST STANDARD.................................................20 4.2.5 TEST SETUP.......................................................................................21 4.2.6 TEST RESULTS...................................................................................21 4.3 DWELL TIME ON EACH CHANNEL.....................................................25 4.3.1 LIMIT OF DWELL TIME USED.............................................................25 4.3.2 TEST INSTRUMENTS..........................................................................25 4.3.3 TEST PROCEDURES..........................................................................25 4.3.4 DEVIATION FROM TEST STANDARD.................................................25 4.3.5 TEST SETUP.......................................................................................26 4.3.6 TEST RESULTS...................................................................................27 4.4 CHANNEL BANDWIDTH......................................................................37 4.4.1 LIMITS OF CHANNEL BANDWIDTH....................................................37 4.4.2 TEST INSTRUMENTS..........................................................................37 4.4.3 TEST PROCEDURE.............................................................................37 4.4.4 DEVIATION FROM TEST STANDARD.................................................37 Report No.: RF981102H02-1 3 Report Format Version 3.0.0 4.4.5 TEST SETUP.......................................................................................38 4.4.6 EUT OPERATING CONDITION............................................................38 4.4.7 TEST RESULTS...................................................................................39 4.5 HOPPING CHANNEL SEPARATION....................................................42 4.5.1 LIMIT OF HOPPING CHANNEL SEPARATION....................................42 4.5.2 TEST INSTRUMENTS..........................................................................42 4.5.3 TEST PROCEDURES..........................................................................42 4.5.4 DEVIATION FROM TEST STANDARD.................................................43 4.5.5 TEST SETUP.......................................................................................43 4.5.6 TEST RESULTS...................................................................................44 4.6 MAXIMUM PEAK OUTPUT POWER....................................................50 4.6.1 LIMITS OF MAXIMUM PEAK OUTPUT POWER MEASUREMENT.....50 4.6.2 INSTRUMENTS....................................................................................50 4.6.3 TEST PROCEDURES..........................................................................50 4.6.4 DEVIATION FROM TEST STANDARD.................................................50 4.6.5 TEST SETUP......................................................…

Text truncated - open the document above for the full version.

Test Report

Report No.: RF981102H02-2 1 Report Format Version 2.0.0 Supplemental “Dual Xmit” Test Report REPORT NO.: RF981102H02-2 MODEL NO.: T77H134 RECEIVED: Nov. 02, 2009 TESTED: Nov. 16 to Dec. 08, 2009 ISSUED: Jan. 13, 2010 APPLICANT: Hon Hai PRECISION IND.CO.,LTD ADDRESS: 5F-1,5 Hsin-An Road Hsinchu, Science-Based Industrial Park Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB LOCATION: No. 81-1, Lu Liao Keng, 9 Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien, Taiwan, R.O.C. This test report consists of 17 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by TAF or any government agencies. The test results in the report only apply to the tested sample. Report No.: RF981102H02-2 2 Report Format Version 2.0.0 Table of Contents 1. CERTIFICATION...............................................................................................................3 2. DUAL XMIT, CONDUCTED EMISSION MEASUREMENT..................................................4 2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT....................................................4 2.2 TEST INSTRUMENTS.......................................................................................................4 2.3 TEST PROCEDURES.......................................................................................................5 2.4 DEVIATION FROM TEST STANDARD...............................................................................5 2.5 TEST SETUP....................................................................................................................5 2.5 EUT OPERATING CONDITIONS.......................................................................................6 2.7 TEST RESULTS................................................................................................................7 3. DUAL XMIT, RADIATED EMISSION MEASUREMENT.......................................................9 3.1 LIMITS OF RADIATED EMISSION MEASUREMENT.........................................................9 3.2 TEST INSTRUMENTS.....................................................................................................10 3.3 TEST PROCEDURES.....................................................................................................11 3.4 DEVIATION FROM TEST STANDARD.............................................................................11 3.5 TEST SETUP..................................................................................................................12 3.6 EUT OPERATING CONDITIONS.....................................................................................12 3.7 TEST RESULTS..............................................................................................................13 4. INFORMATION ON THE TESTING LABORATORIES......................................................17 Report No.: RF981102H02-2 3 Report Format Version 2.0.0 1. CERTIFICATION PRODUCT : WLAN and Bluetooth combo module BRAND NAME : Foxconn MODEL NO. : T77H134 TESTED : Nov. 16 to Dec. 08, 2009 APPLICANT : Hon Hai PRECISION IND.CO.,LTD TEST SAMPLE : ENGINEERING SAMPLE STANDARDS : 47 CFR FCC Part 15, Subpart C ANSI C63.4-2003 PREPARED BY : , DATE: Jan. 13, 2010 ( Claire Kaun, Specialist ) TECHNICAL ACCEPTANCE : , DATE: Jan. 13, 2010 ( Hank Chung, Deputy Manager ) APPROVED BY : , DATE: Jan. 13, 2010 (May Chen, Deputy Manager ) Note: Per FCC co-transmitting policy, the WLAN and Bluetooth combo module was tested for conducted and radiated emissions in restricted bands while transmitting on both 2.4 GHz and bluetooth at simultaneously. Report No.: RF981102H02-2 4 Report Format Version 2.0.0 2. DUAL XMIT, CONDUCTED EMISSION MEASUREMENT 2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT FREQUENCY OF EMISSION (MHz) CONDUCTED LIMIT (dBμV) Quasi-peak Average 0.15-0.5 0.5-5 5-30 66 to 56 56 60 56 to 46 46 50 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50 MHz. 3. All emanations from a class A/B digital device or system, including any network of conductors and apparatus connected thereto, shall not exceed the level of field strengths specified above. 2.2 TEST INSTRUMENTS DESCRIPTION & MANUFACTURER MODEL NO. SERIAL NO. CALIBRATED DATE CALIBRATED UNTIL Test Receiver ESCS 3…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Mrs. Rio Chen(Compliance Deputy Manager)

[email protected]+886-3-5784975Fax: +886-3-5775100

Technical Contact

Bureau Veritas CPS (H.K.) Ltd. Taoyuan BranchEric Lin

[email protected]886-3-593-5343

81-1 Luliaoken, 9th Lin, Wulung Tsuen Chiunglin · Hsinchu · Taiwan

Non-Technical Contact

Bureau Veritas CPS (H.K.) Ltd. Taoyuan BranchEric Lin

[email protected]886-3-593-5343

Test Firm

Bureau Veritas CPS (H.K.) Ltd. Taoyuan BranchRichard Chen

[email protected]886-3-3183232Fax: 886 3 2115834

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.41 GHz - 2.46 GHz	324.00 mW

Modular Type

Single Modular Approval

Confidentiality

Long Term

Grant Notes

Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except co-located Bluetooth transmitter which have been evaluated under this filing. Other collocation configurations require separate evaluation. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.