FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Digi International Inc/
  3. MCQ-CCIMX8

MCQ-CCIMX8ConnectCore 8X

Digi International Inc
ConnectCore 8X - FCC ID MCQ-CCIMX8 - Digi International Inc
Click to zoom

Application Details

Equipment Class
NII - Unlicensed National Information Infrastructure TX
Date of Grant
Jul 15, 2020
Application Purpose
Original Equipment
Date of Application
Jul 15, 2020
Equipment Note
ConnectCore 8X
Frequency Range
5745.00000000 - 5825.00000000
Company
Digi International Inc
Country
United States

Documents & Files

Select a file to view

Users Manual

↗
↗

Cover Letter(s)

↗
↗
↗
↗
↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

RF Exposure Info

↗

Test Report

↗
↗
↗
↗

Test Setup Photos

↗
↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

1 The user manual provides information regarding to section 2.2 through 2.10 of KDB 996369 D03 as below 2.2 List of applicable FCC rules Refer to P.108 of the user manual 2.3 Summarize the specific operational use conditions Non Applicable 2.4 Limited module procedures Non Applicable 2.5 Trace antenna designs Non Applicable 2.6 RF exposure considerations Refer to P.110 of the user manual 2.7 Antennas Refer to P.108-109 of the user manual 2.8 Label and compliance information Refer to P.106 of user manual 2.9 Information on test modes and additional testing requirements Test configurations are detailed on page 41~96 of the user manual. 2.10 Additional testing, Part 15 Subpart B disclaimer Refer to P.107 of User manual

Users Manual

ConnectCore8X System-on-module HardwareReferenceManual--Preliminary ConnectCore®8XSystem-on-ModuleHardwareReferenceManual-- Preliminary 2 Revisionhistory—90002295 RevisionDateDescription 1PDecember 2018 Initialrelease 2PJanuary 2019 Addedbackdrivecaution. 3PMay2019Updatedentiremanual,includingentireMCA section,somepindata,block diagram,andassemblyinformation. 4PMarch 2020 AddedNorthAmericancertifications;addedpowerconsumptionsection; updatedfrequencyvalue,variantsnformation,andsomegraphics;updated MCAtotrademarkedname. 5PMay2020Addedoperatingtemperaturestatement. 6PJune2020AddedCanada,Europe,andJapancertifications;addedFCCnotices;added antennaportsection. Trademarksandcopyright Digi,DigiInternational,andtheDigilogoaretrademarksorregisteredtrademarksintheUnited Statesandothercountriesworldwide.Allothertrademarksmentionedinthisdocumentarethe propertyoftheirrespectiveowners. ©2020DigiInternationalInc.Allrightsreserved. Disclaimers Informationinthisdocumentissubjecttochangewithoutnoticeanddoesnotrepresenta commitmentonthepartofDigiInternational.Digiprovidesthisdocument“asis,”withoutwarrantyof anykind,expressedorimplied,including,butnotlimitedto,theimpliedwarrantiesoffitnessor merchantabilityforaparticularpurpose.Digimaymakeimprovementsand/orchangesinthismanual orintheproduct(s)and/ortheprogram(s)describedinthismanualatanytime. Warranty Toviewproductwarrantyinformation,gotothefollowingwebsite: www.digi.com/howtobuy/terms Customersupport Gathersupportinformation:BeforecontactingDigitechnicalsupportforhelp,gatherthefollowing information: Productnameandmodel Productserialnumber(s) Firmwareversion Operatingsystem/browser(ifapplicable) ConnectCore®8XSystem-on-ModuleHardwareReferenceManual-- Preliminary 3 Logs(fromtimeofreportedissue) Trace(ifpossible) Descriptionofissue Stepstoreproduce ContactDigitechnicalsupport:Digioffersmultipletechnicalsupportplansandservicepackages. Contactusat+1952.912.3444orvisitusatwww.digi.com/support. Feedback Toprovidefeedbackonthisdocument,emailyourcommentsto [email protected] Includethedocumenttitleandpartnumber(ConnectCore®8XSystem-on-ModuleHardware ReferenceManual--Preliminary,900022956P)inthesubjectlineofyouremail. Contents AbouttheConnectCore®8X Featuresandfunctionality6 Modulevariants8 Blockdiagrams9 ConnectCore8Xmodule9 NXPi.MX8Xapplicationprocessor10 SOMrevisions10 IdentifytheSOCrevisionofyourSOM10 TheConnectCore8XSystem-on-module Powerinterfaces12 Referencepowerarchitecturescheme12 System-on-modulepowerrailsdistribution13 Electricalcharacteristics16 Systempower-upsequence19 RTCpowerandcoincellcharger19 Bootstrap20 Wirelessinterfaces21 WLANIEEE802.11a/b/g/n/ac21 Bluetooth28 PCIExpress28 Antennaports30 CryptoAuthenticationdevice31 TheDigiMicrocontrollerAssist™hardware31 Resetcontrol32 IOs33 Watchdog36 Real-timeclock36 Pulsewidthmodulation36 Powermanagement37 MCAfirmwareupdate40 IOMUX Modulepinout42 IOMUXtable43 ExtendedLGA version61 ConnectCore®8XSystem-on-ModuleHardwareReferenceManual-- Preliminary 4 ConnectCore®8XSystem-on-ModuleHardwareReferenceManual-- Preliminary 5 Modulespecifications Powerconsumption98 Powerconsumptionusecases98 Complexpowerconsumptionusecases98 Results99 Environmentalspecifications100 Assemblyinstructions Moisturesensitivityandshelflife102 Mounting102 Coplanarity102 Solderpasteprint102 Stencil102 SMTpickandplace103 SMTprocessparameterreference103 Reflowprofile103 Regulatoryinformationandcertifications UnitedStatesFCC106 Labelingrequirements106 Maximumpowerandfrequencyspecifications(FCC)106 FCCnotices107 FCC-approvedantennas108 RFexposure110 Operatingfrequency110 Europe110 CEmark110 OEMlabelingrequirements110 CElabelingrequirements111 DeclarationsofConformity111 Approvedantennas111 Canada(IC)112 CanadianNotice112 Labelingrequirements112 Transmitterswithdetachableantennas112 RFexposure113 Approvedantennas113 Japan113 ApprovalLabel(MICMarking)114 AbouttheConnectCore®8XFeaturesandfunctionality ConnectCore®8XSystem-on-ModuleHardwareReferenceManual-- Preliminary 6 AbouttheConnectCore®8X TheConnectCore8Xisasecureandextremelycost-effectiveconnectedSystem-on-Moduleplatform. ItsinnovativeDigiSMTplus™(patent-pending)surfacemountformfactorallowsyoutochoose simplifieddesignintegrationleveragingprovenandeasy-to-useedge-castellatedSMTtechnology,ora versatileLGAoptionforultimatedesignflexibilitywithaccesstovirtuallyallinterfaces. BuiltontheNXPi.MX8Xapplicationprocessor,themoduleistheintelligentcommunicationenginefor today’ssecureconnecteddevices.Itintegratesdual-Ethernetandpre-certifieddual-bandWi-Fi (802.11a/b/g/n/ac)withdualmodeBluetooth5.0connectivity. Featuresandfunctionality TheConnectCore8XSystem-on-moduleisbasedonthei.MX8XprocessorfromNXP.Thisprocessor offersanumberofinterfaces,someofthemmultiplexedandnotavailablesimultaneously.Themodule hasthefollowingfeatures: ni.MX8Xdual/quadArmCortex-A35andsingleCortex-M4Fcores: lCortex-A35coresoperateupto1.0GHzandsupportArmvirtualizationextensions. lCortex-M4Fcoreoperatesupto266MHz. lAArch64for64-bitsupport. lAArch32forbackwardcompatibilitywithArmv7. nSystemControlUnit(SCU): lPowercontrol,clocks,andreset. lBootROMs. lPMICinterface. lResourceDomainController. nGraphicsProcessingUnit(GPU): l4xVec4shaderswith16executionunits. lSupportsOpenGL3.0,2.0;OpenGLEX3.1,3.0,2.0and1.1:OpenCL1.2FPand1.1;OpenVG 1.1;andVulkan. lHigh-performance2DBlitEngine. nVideoProcessingUnit(VPU): lH.265decode(4Kp30). lH.264decode(1080p60). lVP6/VP8decode(1080p60). lMPEG-2decode(1080p60). lMPEG4,H263,SorensonSparkdecode(1080p). lRealVideodecode(1080p). lJPEGdec(64Kx64Kimagesize). lH.264encode(1080p30). AbouttheConnectCore®8XFeaturesandfunctionality ConnectCore®8XSystem-on-ModuleHardwareReferenceManual-- Preliminary 7 nUpto4GB,32-bitLPDDR4-1200memory. n16GB,8-biteMMCmemory.Higherdensityavailabledependingonproductvariant. nNXPPF8100PowerManagementIC(PMIC): l7xDC/DCbuckconverters. l4xLDOregulators. lOTP(one-time-programmable)memory. lCoincellcharger. nCryptoAuthenticationdevice. nSecurityaccelerators: lEnhancedHighAssuranceBoot(HAB)securean…

Text truncated - open the document above for the full version.

Cover Letter(s)

Date: July 15, 2020 DTS-UNII Device Declaration Letter To whom it may concern, we declare below featured for equipment authorization regarding FCC ID: MCQ-CCIMX8 IC: 1846A-CCIMX8 (1) DFS Device -- ☐ Master, ☐ Client with Radar detection capability, ☒ Client without radar detection capability, ☐ N/A (2) Active / Passive Scanning Frequency Band(MHz) Active Scanning (able to select a channel and initiate a network by sending enabling signals to other devices) passive scanning (not able to initiate a network) Non Applicable 2412 - 2462 ☒ Yes , ☐ No ☐ Yes , ☒ No ☐ 5150 - 5250 ☒ Yes , ☐ No ☐ Yes , ☒ No ☐ 5250 - 5350 ☐ Yes , ☒ No ☒ Yes , ☐ No ☐ 5470 - 5725 ☐ Yes , ☒ No ☒ Yes , ☐ No ☐ 5725 - 5850 ☒ Yes , ☐ No ☐ Yes , ☒ No ☐ (3) Country code selection ability - ☐ Yes , ☒ No (4) Meet 15.202 requirement - ☒ Yes , ☐ No pls check below : ☐ A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. ☒ A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. Signature: Name (Printed): Scott Wilken Title: CTO, DIGI PRODUCTS AND SERVICES VICE PRESIDENT, TECHNOLOGY On behalf of Company: Digi International Inc. Telephone: +49 (0)89 540428 134 Address: 9350 Excelsior Blvd., Suite 700 Hopkins, MN 55343

External Photos

EUT Photo No.: ER/2019/B0064~69-P Page: 1 of 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90 天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group EXTERNAL PHOTOGRAPHS OF EUT All View of EUT Front View of EUT EUT Photo No.: ER/2019/B0064~69-P Page: 2 of 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90 天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group Back View of EUT Side View of EUT – 1 EUT Photo No.: ER/2019/B0064~69-P Page: 3 of 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90 天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd.No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134 號 台灣檢驗科技股份有限公司t (886-2) 2299-3279f (886-2) 2298-0488www.sgs.com.tw Member of SGS Group Side View of EUT – 2 Side View of EUT – 3 EUT Photo No.: ER/2019/B0064~69-P Page: 4 of 4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90 天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any u…

Text truncated - open the document above for the full version.

ID Label/Location Info

Label location The label stick on the front side.

Internal Photos

EUT Photo No.: ER/2019/B0064~69-P Page: 1 of 8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group PHOTOGRAPHS OF EUT Open View of EUT – 1 Internal View of EUT –1 EUT Photo No.: ER/2019/B0064~69-P Page: 2 of 8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Internal View of EUT –2 Internal View of EUT –3 EUT Photo No.: ER/2019/B0064~69-P Page: 3 of 8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Internal View of EUT –4 Internal View of EUT –5 EUT Photo No.: ER/2019/B0064~69-P Page: 4 of 8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approva…

Text truncated - open the document above for the full version.

RF Exposure Info

Report No: ER/2019/B0069 Page: 1 of 10 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group RF EXPOSURE REPORT OF Applicant: Digi International Inc 9350 Excelsior Blvd., Suite 700 Hopkins, MN 55343 Product Name: ConnectCore 8X Brand Name: Digi Model No.: CC8X Model Difference: N/A Report Number: ER/2019/B0069 FCC ID: MCQ-CCIMX8 IC: 1846A-CCIMX8 FCC Rule Part Part 2.1091 IC Rule: RSS-102 issue 5 Mar. 19, 2015 Issue Date: Jul. 10, 2020 We hereby certify that: The above equipment was verified by SGS Taiwan Ltd. The evaluation in this report is in compliance with the above rule(s). The results of this report relate only to the sample identified in this report. Approved By: John Yeh / Asst. Manager Report No: ER/2019/B0069 Page: 2 of 10 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Revision History Report Number Revision Description Issue Date Remark ER/2019/B0069 Rev.00 Original. Jul. 10, 2020 Revised By: Susan Lin Note: 1、 Disclaimer Antenna information is provided by the applicant, test results of this report are applicable to the sample EUT received. Report No: ER/2019/B0069 Page: 3 of 10 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Table of Contents 1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT)..................................................... 4 1.1 GENERAL: ..................................................................................................................................................................... 4 1.2 ANTENNA INFORMATION: ..............................................................................................................................…

Text truncated - open the document above for the full version.

Test Report

Report No.: ER/2019/B0067 Page: 1 of 387 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT Applicant: Digi International Inc 9350 Excelsior Blvd., Suite 700 Hopkins, MN 55343 Product Name: ConnectCore 8X Brand Name: Digi Model No.: CC8X Model Difference: N/A Report Number: ER/2019/B0067 FCC ID: MCQ-CCIMX8 IC: 1846A-CCIMX8 FCC Rule Part: §15.407, Cat: NII ISED RSS: RSS-247 issue 2 Feb. 2017 Issue Date: Jul. 13, 2020 Date of Test: Dec. 04, 2019 ~ Feb 07, 2020 Date of EUT Received: Dec. 04, 2019 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Central RF Lab The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10: 2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits. The test results of this report relate only to the tested sample identified in this report. Approved By: CHUN-CHIEH, CHEN / Supervisor Report No.: ER/2019/B0067 Page: 2 of 387 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明,此報告結果僅對測試之樣品負責,同時此樣品僅保留90天。本報告未經本公司書面許可,不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Co…

Text truncated - open the document above for the full version.

Contact Information

Applicant

Erik Reynolds(Director of Engineering)
[email protected]952-912-4248Fax: 952-912-4248

Technical Contact

SGS Taiwan Ltd.Jim Chang
[email protected]886 2 2299 3279

No. 134, Wu Kung Rd., New Taipei Industrial Park · New Taipei City · Taiwan

Non-Technical Contact

SGS Taiwan Ltd.Jim Chang
[email protected]886 2 2299 3279

Test Firm

SGS Taiwan Ltd. Central RF LabRyan WANG
[email protected]+886-2-2299-3279

Technical Specifications

#Rule PartsFrequency RangePower Output
415E5.75 GHz - 5.83 GHz42.00 mW
Modular Type
Single Modular Approval
Confidentiality
Long Term
Grant Notes
Power Output listed is conducted. Single Modular Approval. Device is an 802.11a/n/ac device in a 2x2 Spatial Multiplexing MIMO configuration and enabled for either 2.4 or 5 GHz band operations as described in this filing. This device is granted for use in Mobile only configurations. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This device has 20 MHz, 40 MHz and 80MHz bandwidth modes.

Other Applications from Digi International Inc

MCQ-XBHXR

XBee Sub-GHz Radio Module

Aug 05, 2026

Equipment Class

DSS - Part 15 Spread Spectrum Transmitter
MCQ-XB3P9XR

XBee3 Sub-GHz and 2.4GHz Radio Module

Mar 31, 2026

Equipment Class

DSS - Part 15 Spread Spectrum Transmitter
MCQ-XBP9XR

XBee Sub-GHz Radio Module

Mar 31, 2026

Equipment Class

DSS - Part 15 Spread Spectrum Transmitter
MCQ-DIW732

WIFI 7 Module

Feb 11, 2026

Equipment Class

6ID - 15E 6 GHz Low Power Indoor Access Point
XBLR - FCC ID MCQ-XBLR - Digi International Inc
MCQ-XBLR

XBLR

Dec 30, 2025

Equipment Class

DSS - Part 15 Spread Spectrum Transmitter