MCQ-XBLPXDigi Xbee XR 900

Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Digi International Inc Address: 9350 Excelsior Blvd, Suite 700, Hopkins, MN 55343 Product Name: XBee XR 900 MHz 900HP FCC ID: MCQ-XBLPX Model(s): XB9XR 2.911(d)(5)(i) Equipment Type We, [Insert applicant name] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Erik Reynolds Date: July 23, 2024 Title and Company name: Director, Test Engineering, Digi International Inc

Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Digi International Inc Address: 9350 Excelsior Blvd, Suite 700, Hopkins, MN 55343 Product Name: XBee XR 900 MHz 900HP FCC ID: MCQ-XBLPX Model(s): XB9XR 2.911(d)(5)(ii) Applicant filing We, [Insert applicant name] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is is not identified on the “Covered List”, established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Erik Reynolds Date: July 23, 2024 Title and Company name: Director, Test Engineering, Digi International Inc

Section 2.911(d)(7) USA Agent for Service of Process Company name: Digi International Inc Address: 9350 Excelsior Blvd, Suite 700, Hopkins, MN 55343 Product Name: XBee XR 900 MHz 900HP FCC ID: MCQ-XBLPX Model(s): XB9XR 2.911(d)(7) USA Designated Agent for Service of Process We, Digi International Inc. (“the applicant”), designate Digi International Inc. for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Digi International Inc. USA Address: 9350 Excelsior Blvd Suite 700 Hopkins, MN 55343 FRN Number 0010283307 Contact Name: Erik Reynolds Telephone No: 952-912-3444 Email: [email protected] Applicant Company name: Digi International Inc. USA Address: 9350 Excelsior Blvd Suite 700 Hopkins, MN 55343 Grantee FRN Number 0010283307 FCC Grantee Code: MCQ Contact Name: Erik Reynolds Telephone No: 952-912-3444 Email: [email protected] 12345uy Signature: Title: Dir, Test Engineering Signature: Title: Dir, Test Engineering Date: July 23, 2024 Date: July 23, 2024

Letter of Authorization Company: Digi International Inc Address: 9350 Excelsior Blvd, Suite 700, Hopkins, MN 55343 Product Name: XBee XR 900 MHz 900HP Model Number(s): XB9XR Product Description: XBee radio module with 19 dBm RF output, 10 kbps FSK and 200 kbps GFSK, FHSS We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: July 23, 2024 Name: Douglas Datwyler Title: Principal RF Engineer Company: Digi International Inc

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 23, 2024 Subject; Request for Confidentiality FCC ID: MCQ-XBLPX To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Erik Reynolds Title: Director, Test Engineering

Date: 12 September 2024 RE: Declaration Letter of Electrically Identical Module FCC ID: MCQ-XBLPX Model: XB9XR To whom it may concern, We, Digi International Inc, declare that the above-mentioned radio module is electrically identical to a previously certified device (Xbee XR 900, FCC ID: MCQ-XB9XR). This radio module is the same radio module as previously certified with the only difference being that additional modulations are enabled. Therefore, the original test report for FCC ID: MCQ-XB9XR is applicable for this new application under FCC ID: MCQ- XBLPX. The original report is being leveraged along with an addendum report which contains the additional delta testing that has been performed on the added modulations. Test Report(s) 24MCRS201_FCC15C247 24MCRS201_FCC15C247 (MPE) Sincerely, Erik Reynolds / Director, Test Engineering Digi International Inc [email protected]

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 23, 2024 Subject; Modular Transmitter Application Company name: Digi International Inc FCC ID: MCQ-XBLPX Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID MCQ-XBLPX has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The modular transmitter has its own shield The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The modular transmitter modulation inputs are buffered The module must contain power supply regulation on the module. The modular transmitter has its own power supply regulator The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The modular transmitter has a “unique” connector/coupler and will be noted to have “professional installation” required The module must demonstrate compliance in a stand-alone configuration. The modular transmitter is tested in stand- alone configuration The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The modular transmitter will have a permanently affixed label. The FCC ID will be visible on the label. The end user/integrator will be instructed to add “Contains FCC ID: MCQ-XBLPX” or similar wording to their product label. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. The modular transmitter complies with the rules for complete transmitter The module must comply with RF exposure requirements The modular transmitter will comply with RF exposure requirements Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules 237 2.3 Summarize the specific operational use conditions 237 2.4 Limited module procedures 237 2.5 Trace antenna designs 237 2.6 RF exposure considerations 238 2.7 Antennas 231 - 236 2.8 Label and compliance information 238 2.9 Information on test modes and additional testing requirements 239 2.10 Additional testing, Part 15 Subpart B disclaimer 239 Name: Erik Reynolds Date: August 29, 2024 Title: Director, Test Engineering Signature of applicant

FCC Part 15, Subpart C, Section 15.247 – FHSS Page 82 of 85 XBee XR 900, Model XB9XR FCC ID: MCQ-XB9XR ULTRATECH GROUP OF LABS File #: 24MCRS201_FCC15C247 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 March 27, 2024 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 5.6. RF EXPOSURE REQUIRMENTS [§§ 15.247(i), 1.1310 & 2.1091] § 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in 1.1307(b). Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 6141.63*(100) 6 3.0-30 1842/f4.89/f*(900/f 2 ) 6 30-300 61.40.1631.0 6 300-1500 f/300 6 1500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 6141.63*(100) 30 1.34-30 824/f2.19/f*(180/f 2 ) 30 30-300 27.50.0730.2 30 300-1500 f/1500 30 1500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density Note 1: Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. Note 2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or can not exercise control over their exposure. 5.6.1. Method of Measurements Calculation Method of Power Density/RF Safety Distance: 22 44r EIRP r PG S      Where, P: power input to the antenna in mW EIRP: Equivalent (effective) isotropic radiated power. S: power density mW/cm 2 G: numeric gain of antenna relative to isotropic radiator r: distance to centre of radiation in cm FCC Part 15, Subpart C, Section 15.247 – FHSS Page 83 of 85 XBee XR 900, Model XB9XR FCC ID: MCQ-XB9XR ULTRATECH GROUP OF LABS File #: 24MCRS201_FCC15C247 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 March 27, 2024 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) 5.6.2. RF Evaluation Frequency (MHz) Tune-up Power (dBm) Maximum Antenna Assembly Gain (dBi) EIRP (dBm) EIRP (mW) Evaluation Distance, r (cm) Power Density, S (mW/cm 2 ) MPE Limit (mW/cm 2 ) Margin (mW/cm 2 ) 902.5 19 14.48 33.48 2228.435 26 0.262 0.602 -0.340

- - - - Documents & Resources Drawings Drawing 2111400100_sd.pdf Packaging Design Drawing 2111400100-001.pdf 3D Models and Design Files 3D Model 2111400100_stp.zip Specifications Application Specification 2111400100-000.pdf Product Specification 2111400100-001.pdf Product Environment Compliance Compliance Multiple Part Product Compliance Statements Eu RoHS REACH SVHC Low-Halogen Multiple Part Industry Compliance Documents IPC 1752A Class C Part Number : 2111400100 Product Description : ISM 868/915MHz Flexible Antenna, 100.00mm Cable Length, Compatible with U.FL / I-PEX MHF Connectors Series Number : 211140 Status : Active Product Category : Antennas GADSL/IMDSNot Relevant China RoHS EU ELVNot Relevant Low-Halogen StatusLow-Halogen per IEC 61249-2-21 REACH SVHCNot Contained per D(2023)3788-DC (14 Jun 2023) EU RoHSCompliant per EU 2015/863 - - - - IPC 1752A Class D Molex Product Compliance Declaration IEC-62474 chemSHERPA (xml) EU RoHS Certificate of Compliance Part Details General Electrical Physical StatusActive CategoryAntennas Series211140 DescriptionISM 868/915MHz Flexible Antenna, 100.00mm Cable Length, Compatible with U.FL / I-PEX MHF Connectors Component TypeFlexible Antenna with Cable FunctionSignal Product FamilyIndustrial, Scientific and Medical (ISM) Antennas Product NameISM 868/915 MHz Stand Alone ProtocolLoRa, Neul, SigFox, Z-Wave, Zigbee TypeInternal, ISM Antenna, LPWAN UPC191130157419 Band#1 F_End (MHz)870 Band#1 F_Start (MHz)868 Band#2 F_End (MHz)928 Band#2 F_Start (MHz)902 Electrical ConnectivityCable Peak Gain (dBi)0.3 @ 868 MHz, 1.0 @ 902 MHz Return Loss - S11 (dB)< -5 Total Efficiency>55% @ 868 MHz, >60% @ 902 MHz Cable Length100.00mm Length38.00mm Mates With / Use With Mates with Part(s) This document was generated on Oct 31, 2023 Mounting StyleAdhesive Net Weight0.626/g Packaging TypePET Film PolarizationLinear Radiation PatternOmnidirectional Thickness0.10mm Width10.00mm DescriptionPart Number 50 Ohms, MCRF, PCB Vertical Jack Receptacle, SMT, 1.25mm Mounted Height 0734120110

APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 1 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 868/915MHZ FLEXIBLE ANTENNA TABLE OF CONTENTS 1.0 SCOPE 2.0 PRODUCT DESCRIPTION 3.0 APPLICABLE DOCUMENTS 4.0 ANTENNA PERFORMANCE 5.0 ASSEMBLY GUIDELINE 6.0 RF PERFORMANCE AS A FUNCTION OF IMPLEMENTATION APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 2 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 868/915MHZ FLEXIBLE ANTENNA 1.0 SCOPE This specification describes the antenna application and surrounding. The information in this document is for reference and benchmark purposes only. The user is responsible for validating antenna rf performance based on the user’s actual implementation. Antenna illustrations in this document are generic representations. They are not intended to be an image of any antenna listed in the scope. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 868/915MHz Flexible Antenna Series Number: 211140 2.2 DESCRIPTION 211140 is a monopole flexible antenna for ISM 868/915MHz dual band. Antenna size 38x10x0.1mm is made from flexible polymer material, cable standard length 100mm. It can be easily installed by simply “peel and stick” on non-metal surface. 2.3 PRODUCT STRUCTURE INFORMATION Please refer to PS-2111400100 for full information. Molex 2111400100 868/915MHz Flexible Antenna 3D View APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 3 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 3.0 APPLICABLE DOCUMENTS DOCUMENT NUMBER DESCRIPTION Sale Drawing(SD) SD-2111400100 Mechanical Dimension of the product Product Specification (PS) PS-2111400100 Product Specification Packing Drawing(PK) PK-2111400100 Product packaging specifications 4.0 ANTENNA PERFORMANCE 4.1 RF TEST CONDITIONS All measurements are done of the antenna mounted on a PC/ABS material block of 1.5mm thickness with VNA Agilent 5071C and Over-The-Air (OTA) chamber. All measurements in this document are done with the part no.2111400100 with a cable length of 100mm. FIGURE4.1.1 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 4 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC FIGURE4.1.2 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS WITH VNA APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 5 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC FIGURE4.1.3 ANTENNA LOADED WITH PC/ABS BLOCK OF 1.5 MM THICKNESS WITH OTA CHAMBER APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 6 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 4.2 ANTENNA PERFORMANCE DESCRIPTION EQUIPMENT REQUIREMENT Frequency Range VNA E5071C 868-870MHz 902-928MHz Return Loss VNA E5071C <- 5dB Peak Gain (Max) OTA Chamber 0.3dBi 1.0dBi Average Total Efficiency OTA Chamber >55% >60% Polarization OTA Chamber Linear Input Impedance VNA E5071C 50 ohms Note that the above antenna performance is measured with just the antenna mounted on a PC/ABS block to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 7 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chris Zhong 2018/11/29 TEMPLATE FILENAME: APPLICATION_SPEC[SIZE_A](V.1).DOC 4.3 RETURN LOSS PLOT All measurements in this document are done with a cable length of 100mm. FIGURE 4.3.1 RETURN LOSS OF ANTENNA AT 868/915MHZ IN FREE SPACE APPLICATION SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915MHz Flexible Antenna Application Specification SHEET No. A EC No: 608264 8 of 20 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: AS-2111400100 Liu Hai 2018/11/29 Cheng Kang 2018/11/29 Chr…

Text truncated - open the document above for the full version.

PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915 MHz Flexible Antenna Product Specification SHEET No. A EC No: 608264 1 of 7 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2111400100 Kang Cheng 2018/11/20 Cooper Zhou 2018/11/20 Stary Song 2018/11/20 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC TITLE 868/915MHZ FLEXIBLE ANTENNA TABLE OF CONTENTS 1. SCOPE 2. PRODUCT DESCRIPTION 3. APPLICABLE DOCUMENTS 4. GENERAL SPECIFICATION 5. ANTENNA SPECIFICATION 6. MECHANICAL SPECIFICATION 7. ENVIRONMENTAL SPECIFICATION 8. PACKING PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915 MHz Flexible Antenna Product Specification SHEET No. A EC No: 608264 2 of 7 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2111400100 Kang Cheng 2018/11/20 Cooper Zhou 2018/11/20 Stary Song 2018/11/20 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 868/915 MHZ FLEXIBLE ANTENNA 1.0 SCOPE This Product Specification covers the mechanical, electrical and environmental performances specification for 868/915 MHz Flexible Antenna. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER (S) Product name: 868/915MHz Flexible Antenna Series Number: 211140* 2.2 DESCRIPTION 211140 is a monopole flexible antenna for ISM 868/915MHz dual band. Antenna size 38x10x0.1mm is made from flexible polymer material, cable standard length 100mm. It can be easily installed by simply “peel and stick” on non-metal surface. 2.3 FEATURES  ISM 868/915MHz dual band  Antenna size 38x10x0.1mm  IPEX MHF (U.FL compatible) connector  Cable OD1.13mm, standard length options for 100 mm  Cable and connector can be customized  RoHS Compliant Molex 2111400100 868/915 MHz FLEXIBLE ANTENNA MODULE 3D VIEW PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915 MHz Flexible Antenna Product Specification SHEET No. A EC No: 608264 3 of 7 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2111400100 Kang Cheng 2018/11/20 Cooper Zhou 2018/11/20 Stary Song 2018/11/20 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 2.4 PRODUCT STRUCTURE INFORMATION P/N 2111400100 Mechanical Structure Information for 2111400100 PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915 MHz Flexible Antenna Product Specification SHEET No. A EC No: 608264 4 of 7 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2111400100 Kang Cheng 2018/11/20 Cooper Zhou 2018/11/20 Stary Song 2018/11/20 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 3.0 APPLICABLE DOCUMENTS Document Number Description Sale Drawing(SD) SD-2111400100 Mechanical Dimension of the product Application Guide(AS) AS-2111400100 Antenna Application and surrounding Packing Drawing(PK) PK-2111400100 Product packaging specifications 4.0 GENERAL SPECIFICATION Product name 868/915 MHz Flexible Antenna Part number 2111400100 Frequency 868-870 MHz 902-928 MHz Polarization Linear Operating with matching -40°C to 85°C Storage with matching -40°C to 85°C RF Power 2 Watts Impedance with matching 50 Ohms Antenna type Flex Connector type U.FL (MHF compatible) User Implementation type Adhesive 3M 9077 Cable diameter Ø1.13mm Single weight 0.626 g (P/N For 2111400100) Cable length 100 mm (P/N for 2111400100) PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915 MHz Flexible Antenna Product Specification SHEET No. A EC No: 608264 5 of 7 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2111400100 Kang Cheng 2018/11/20 Cooper Zhou 2018/11/20 Stary Song 2018/11/20 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 5.0 ANTENNA SPECIFICATION. 5.1 ELECTRICAL REQUIREMENT 5.1.1 ELECTRICAL REQUIREMENTS FOR CABLE LENGHTH 100mm P/N 2111400100 Frequency Range 868-870MHz 902-928MHz Peak Gain(Max) 0.3dBi 1.0dBi Average Total efficiency >55% >60% Return Loss < -5 dB Note that the above antenna performance is measured with just the antenna mounted on a PC/ABS block to similar a free-space condition. When implement into the system, the frequency resonant might be off-tune due to the loading of surrounding components especially metal plane. This off-tune can be compensated through matching. Although module manufacturers specify a peak gain limit, it is based on free-space conditions. The peak gain will be degraded by 1 to 2dBi in the actual implementation as the radiation pattern will change due to the surround components. As such, during selection of antenna, you can select one with high peak gain to compensate for the loss. Molex can offer assistant to choose the best location and best tuning in-order to meet this peak gain requirement. 6.0 MECHANICAL SPECIFICATION DESCRIPTION TEST CONDITION TEST RESULT Pull Test 1. Test machine: Max intelligent load tester 2. Stick the flex antenna on a plastic board, pull cable in axial direction. Pull force >8N Un-mating force (connector) Solder the receptacle connector to the test board ,then place the board and plug on push-on/pull-off machine, and repeat mating and un-mating 30 cycles at a speed 25±3mm/min. along the mating axis. Un-mating force : 0.5 kgf min PRODUCT SPECIFICATION REVISION: ECR/ECN INFORMATION: TITLE: 868/915 MHz Flexible Antenna Product Specification SHEET No. A EC No: 608264 6 of 7 DATE: 2018/12/03 DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: APPROVED BY: PS-2111400100 Kang Cheng 2018/11/20 Cooper Zhou 2018/11/20 Stary Song 2018/11/20 TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A4](V.1).DOC 7.0 ENVIRONMENTAL SPECIFICATION DESCRIPTION SPECIFICATION Temperature /Humidity cycling 1.The device under test is kept for 30 mins in an environment with a temperature of -40 °C. 2. Kept for 4 Hours in an environment with a temperature of 85 degrees and a relative humidity of 95%. 3. Kept for 2 Hours in an environment with a temperature of 125 degrees and a relative humidity of 95%. 4. The cycle is repeated until a total of 40 cycles have been completed. Hereafter…

Text truncated - open the document above for the full version.

© Copyright 2022 TE Connectivity Ltd.

DATA AND DEVICES / FG9026 FG9026 Omnidirectional Antenna 902-928 MHz Laird’s fiberglass base station antennas are collinear designs enclosed in a high-density fiberglass, which is covered with a protective ultraviolet inhibiting coating. The radiating elements are made from high efficiency copper and are carefully phased to provide maximum gain in the horizontal plane. The mounting sleeves are tuned to eliminate RF currents from the transmission line, resulting in a “cold” sleeve allowing great freedom in mounting. This high quality and well-focused beam provides the highest gain and best efficiency. FEATURES AND BENEFITS • High performance • Easy installation w/ optional FM2 • Special UV treated radome, resists sun damage • N-female industry standard connector • 100% tested on a network analyzer ELECTRICAL SPECIFICATIONS Operating Frequency (MHz)902-928 VSWR, max1.5:1 Peak Gain (dBi)8.0 Nominal Impedance (Ohms)50 Max Power - Ambient 25°C (W)100 PolarizationVertical Vertical Plane 3 dB Beamwidth 30° Horizontal Plane 3 dB Beamwidth360° TerminationN-female Connector MECHANICAL SPECIFICATIONS Dimensions – diameter x height – cm (inches)3.33 x 154.94 (1.31 x 61.0) Weight – kg (lbs.)0.23 (0.5) Lightning ProtectionLightning Arrestor LABH350NN (Sold Separately) Mounting InformationFM2 Mounting Kit (Sold separately) Lateral Thrust@ 125mph – kg (lbs.)26 (57) te.com TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability o…

Text truncated - open the document above for the full version.