MCQ-XSTICK2XStick ZNet 2.5

XBee ™ Adapters, Routers, and Sensors User’s Guide XBee ZNet 2.5 (Series 2) Adapters: XBee RS-232 Adapter XBee RS-232 PH (Power Harvester) Adapter XBee RS-485 Adapter XBee Analog I/O Adapter XBee Digital I/O Adapter XBee Sensor Adapter XBee USB Adapter XStick ZNet 2.5 XBee Wall Router XBee Sensors www.digi.com 90000891_B ©2008 Digi International Inc. All Rights Reserved. Digi, Digi International, the Digi logo, ConnectPort, Watchport, and XBee are trademarks or registered trademarks of Digi International, Inc. in the United States and other countries worldwide. All other trademarks are the property of their respective owners. Information in this document is subject to change without notice and does not represent a commitment on the part of Digi International. Digi provides this document “as is,” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time. This product could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes may be incorporated in new editions of the publication. Contents 3 Chapter 1 General information............................................................. 4 About this guide............................................................................................... 4 Scope ........................................................................................................ 4 Compatibility Note ..................................................................................... 4 Mounting orientation ........................................................................................ 4 Additional reference material........................................................................... 5 Chapter 2 XBee RS-232 Adapter........................................................... 7 Chapter 3 XBee RS-232 PH Adapter................................................... 10 Chapter 4 XBee RS-485 Adapter......................................................... 14 Chapter 5 XBee Analog I/O Adapter ................................................... 18 Chapter 6 XBee Digital I/O Adapter .................................................... 30 Chapter 7 XBee Sensor Adapter......................................................... 41 Chapter 8 XBee USB Adapter ............................................................. 45 Chapter 9 XStick ZNet 2.5 ................................................................... 47 Chapter 10 XBee Wall Router ............................................................... 48 Chapter 11 XBee Sensors ..................................................................... 53 Chapter 12 Configure XBee radio settings .......................................... 60 Configuration with a ConnectPort X gateway ................................................ 60 Access the gateway’s web interface........................................................ 60 Discover the device and view the network .............................................. 61 View and change XBee radio settings as needed ................................... 62 Chapter 13 Hardware specifications .................................................... 66 XBee Adapters .............................................................................................. 66 XStick ZNet 2.5.............................................................................................. 69 XBee Wall Router .......................................................................................... 70 Integrated sensors ................................................................................... 70 XBee Sensors................................................................................................ 71 Integrated sensors ................................................................................... 71 Chapter 14 Safety statements............................................................... 72 Contents General information 4 This section includes information that applies to all XBee ™ Adapter, Router, and Sensor products. About this guide This guide describes the features and functions of XBee Adapter, Router, and Sensor products, including connection and setup information, pinouts, configuration, data retrieval, and LEDs and buttons. This section provides general information that applies to all products. Scope This guide covers all XBee ZNet 2.5 (Series 2) adapter, router, and sensor products. Compatibility Note Two sets of XBee and XBee-PRO adapters are offered: Series 1 and Series 2. Though overall performance and product specifications are largely similar, the two series are built on distinct and non-compatible technology platforms. Thus, users must standardize on one series or the other for operability. The same is true for compatibility with the ConnectPort X gateways. Series 1 XBee adapters are compatible only with Series 1 gateways, while Series 2 XBee adapters are compatible only with Series 2 gateways. Mounting orientation All XBee Adapters can be mounted in any orientation. Warranty exception for batteries Some XBee Adapters and Sensor products ship with alkaline batteries that must be replaced by the user when discharged and are not covered under the terms and conditions of the Digi warranty. Lithium batteries must be replaced by qualified service personnel. Chapter 1 General information General information 5 Additional reference material For additional information about the features and functions of XBee RF modules in XBee Adapters, see these documents. XBee Adapters data sheet http://www.digi.com/pdf/ds_xbeeadapters.pdf XBee Wall Router data sheet http://www.digi.com/pdf/ds_xbeewallrouter.pdf These data sheets provide overviews of XBee Adapter and Wall Rou…

Text truncated - open the document above for the full version.

This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications (FCC 15.21) Changes or modifications to this equipment not expressly approved by Digi may void the user's authority to operate this equipment. Industry Canada Declaration of Conformity (in accordance with FCC Dockets 96-208 and 95-19) Manufacturer's Name: Digi International Corporate Headquarters: 11001 Bren Road East Minnetonka MN 55343 Manufacturing 10000 West 76th Street, Headquarters:Eden Prairie MN 55344 FCC Part 15 Class B Radio Frequency Interference (RFI) (FCC 15.105) Labeling Requirements (FCC 15.19) This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: FCC Part 15 Class B Radio Frequency Interference (RFI) (FCC 15.105) Declaration of Conformity (in accordance with FCC Dockets 96-208 and 95-19) Manufacturer's Name: Digi International Corporate Headquarters: 11001 Bren Road East Minnetonka MN 55343 Manufacturing 10000 West 76th Street, Headquarters:Eden Prairie MN 55344 PN:(1P) A90000935-88 PN:(1P) A90000935-88 Digi International declares, that the product: Product Name: XStick ZNet 2.5 50001547-xx to which this declaration relates, meets the requirements specified by the Federal Communications Commission as detailed in the following specifications: - Part 15, Subpart B, for Class B Equipment - FCC Docket 96-208 as it applies to Class B - Personal computers and peripherals The product listed above has been tested at an External Test Laboratory certified per FCC rules and has been found to meet the FCC, Part 15, Class B, Emission Limits. Documentation is on file and available from the Digi International Homologation Department. International EMC Standards This product meets the following electromagnetic emissions standards: - AS/NZS CISPR 22 - VCCI - ICES-003 - EN 55022 - EN 55024 Safety Standards - UL/CUL 60950-1 - IEC/EN 60950-1 - CSA This product meets the following safety standards: Certifications and Agency Approvals - United States (FCC Part 15.247): FCC ID: MCQ-XSTICK2 - Industry Canada (IC): IC: 1846A-XSTICK2 - Europe (CE): ETSI This Class B digital apparatus complies with Canada ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. -ICES-003 Annex. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15 Subpart B, of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications (FCC 15.21) Changes or modifications to this equipment not expressly approved by Digi may void the user's authority to operate this equipment. Industry Canada Labeling Requirements (FCC 15.19) This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: This Class B digital apparatus complies with Canada ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. -ICES-003 Annex. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Digi International declares, that the product: Product Name: XStick ZNet 2.5 50001547-xx to which this declaration relates, meets the requirements specified by the Federal Communications Commission as detailed in the following specifications: - Part 15, Subpart B, for Class B Equipment - FCC Docket 96-208 as it applies to Class B - Personal computers and periph…

Text truncated - open the document above for the full version.

March 13, 2008 Ultratech Engineering Labs, Inc. 3000 Bristol Circle Oakville, Ontario L6H 6G4 Subject: Application for Equipment Certification under FCC Part 15, Subpart C, Section 15.247 - Digital Modulation Systems (DTS) Operating in 2400 - 2483.5 MHz Band. Applicant: Digi International Inc. Product: XStick ZNet 2.5 Model No.: XSTICK2 FCC ID: MCQ-XSTICK2 Dear Sir/Madam As appointed agent for Digi International Inc., we submit the application for certification of the above product. Please review all files uploaded to your electronic filing site. If you have any queries, please do not hesitate to contact us. Yours truly, Dan Huynh, B. Sc, Authorized Agent UltraTech Group of Labs Ultratech’s Accreditations: 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com Email: [email protected]

USB Enclosure (BEZEL SIDE) LABEL LABEL LOCATION XSTICK2 (not to scale)

FCC Part 15, Subpart C, Section 15.247 – DTS Page 7 XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 ULTRATECH GROUP OF LABS File #: MXS-070F15C247 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 March 13, 2008 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) EXHIBIT 5. SUMMARY OF TEST RESULTS 5.1. LOCATION OF TESTS All of the measurements described in this report were performed at Ultratech Group of Labs located in the city of Oakville, Province of Ontario, Canada. • AC Power Line Conducted Emissions were performed in UltraTech's shielded room, 24'(L) by 16'(W) by 8'(H). • Radiated Emissions were performed at the Ultratech's 3-10 TDK Semi-Anechoic Chamber situated in the Town of Oakville, province of Ontario. This test site been calibrated in accordance with ANSI C63.4, and found to be in compliance with the requirements of Sec. 2.948 of the FCC Rules. The descriptions and site measurement data of the Oakville 3-10 TDK Semi-Anechoic Chamber has been filed with FCC office (FCC File No.: 31040/SIT 1300B3) and Industry Canada office (Industry Canada Site No.: 2049A-3, Expiry Date: May 17, 2009). 5.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS FCC Section(s) Test Requirements Compliance (Yes/No) 15.203 Antenna requirements Yes 15.207(a) Power Line Conducted Emissions Yes 15.247(a)(2) 6 dB Bandwidth Yes 15.247(b)(3) Peak Conducted Output Power - DTS Yes 15.247(d) Band-Edge and RF Conducted Spurious Emissions at the Transmitter Antenna Terminal Yes 15.247(d), 15.209 & 15.205 Transmitter Spurious Radiated Emissions Yes 15.247(e) Power Spectral Density Yes 15.247(i) 1.1307, 1.1310, 2.1091 & 2.1093 RF Exposure Yes* The digital circuit portion of the EUT has been tested and verified to comply with FCC Part 15, Subpart B, Class B Digital Devices. The engineering test report is available upon request. * SAR evaluation is not required, output power is below low threshold (60/f(GHz) mW = (60/2.48) mW = 24 mW) 5.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES None.

XStick ZNet 2.5 Model No.: XSTICK2 FCC ID: MCQ-XSTICK2 Applicant: Digi International Inc. 11001 Bren Road East Minnetonka, MN 55343 In Accordance With Federal Communications Commission (FCC) Part 15, Subpart C, Section 15.247 Digital Modulation Systems (DTS) Operating in 2400 – 2483.5 MHz Band UltraTech's File No.: MXS-070F15C247 This Test report is Issued under the Authority of Tri M. Luu, Professional Engineer, Vice President of Engineering UltraTech Group of Labs Date: March 13, 2008 Report Prepared by: Dan Huynh Issued Date: March 13, 2008 Tested by: Mr. Hung Trinh, EMI/RFI Technician Test Dates: November 28-30, 2007 December 3 & 5, 2007 The results in this Test Report apply only to the sample(s) tested, and the sample tested is randomly selected. This report must not be used by the client to claim product endorsement by NVLAP or any agency of the US Government. UltraTech 3000 Bristol Circle, Oakville, Ontario, Canada, L6H 6G4 Tel.: (905) 829-1570 Fax.: (905) 829-8050 Website: www.ultratech-labs.com , Email: [email protected], Email: [email protected] 0685 31040/SIT C-1376 46390-2049 200093-0 SL2-IN-E-1119R FCC Part 15, Subpart C, Section 15.247 – DTS Contents i XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 ULTRATECH GROUP OF LABS File #: MXS-070F15C247 3000 Bristol Circle, Oakville, Ontario, Canada L6H 6G4 March 13, 2008 Tel. #: 905-829-1570, Fax. #: 905-829-8050, Email: [email protected] , Website: http://www.ultratech-labs.com All test results contained in this engineering test report are traceable to National Institute of Standards and Technology (NIST) TABLE OF CONTENTS EXHIBIT 1. SUBMITTAL CHECK LIST ..........................................................................................................................................1 EXHIBIT 2. INTRODUCTION ............................................................................................................................................................2 2.1. SCOPE ............................................................................................................................................................................................2 2.2. RELATED SUBMITTAL(S)/GRANT(S).......................................................................................................................................2 2.3. NORMATIVE REFERENCES .......................................................................................................................................................2 EXHIBIT 3. PERFORMANCE ASSESSMENT .................................................................................................................................3 3.1. CLIENT INFORMATION ..............................................................................................................................................................3 3.2. EQUIPMENT UNDER TEST (EUT) INFORMATION.................................................................................................................3 3.3. EUT’S TECHNICAL SPECIFICATIONS......................................................................................................................................4 3.4. LIST OF EUT’S PORTS.................................................................................................................................................................4 3.5. ANCILLARY EQUIPMENT ..........................................................................................................................................................5 EXHIBIT 4. EUT OPERATING CONDITIONS AND CONFIGURATIONS DURING TESTS...................................................6 4.1. CLIMATE TEST CONDITIONS ...................................................................................................................................................6 4.2. OPERATIONAL TEST CONDITIONS & ARRANGEMENT FOR TESTS.................................................................................6 EXHIBIT 5. SUMMARY OF TEST RESULTS..................................................................................................................................7 5.1. LOCATION OF TESTS..................................................................................................................................................................7 5.2. APPLICABILITY & SUMMARY OF EMC EMISSION TEST RESULTS ..................................................................................7 5.3. MODIFICATIONS INCORPORATED IN THE EUT FOR COMPLIANCE PURPOSES............................................................7 EXHIBIT 6. MEASUREMENTS, EXAMINATIONS & TEST DATA FOR EMC EMISSIONS ..................................................8 6.1. TEST PROCEDURES ....................................................................................................................................................................8 6.2. MEASUREMENT UNCERTAINTIES ..........................................................................................................................................8 6.3. MEASUREMENT EQUIPMENT USED .......................................................................................................................................8 6.4. ESSENTIAL/PRIMARY FUNCTIONS AS DECLARED BY THE MANUACTURER...............................................................8 6.5. POWER LINE CONDUCTED EMISSIONS [§15.207(a)].............................................................................................................9 6.6. OCCUPIED BANDWIDTH [§ 15.247(a)(2)] ............................................................................................................................... 13 6.7. PEAK CONDUCTED OUTPUT POWER - DTS [§ 15.247(b)]................................................................................................... 17 6.8. TRANSMITTER BAND-EDGE & SPURIOUS CONDUCTED EMISSIONS [§ 15.247(d)]................................…

Text truncated - open the document above for the full version.

ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 1 Power Line Conducted Emissions ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 2 Power Line Conducted Emissions ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 3 Radiated Emissions @ 3 m (Tx/Rx) EUT Orientation: Orthogonal Position 1 ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 4 Radiated Emissions @ 3 m (Tx/Rx) EUT Orientation: Orthogonal Position 1 ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 5 Radiated Emissions @ 3 m (Tx/Rx) EUT Orientation: Orthogonal Position 1 ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 6 Radiated Emissions @ 3 m (Tx/Rx) EUT Orientation: Orthogonal Position 2 ANNEX 1 - TEST SETUP PHOTOS Digi International, Inc. XStick ZNet 2.5, Model XSTICK2 FCC ID: MCQ-XSTICK2 A1 - 7 Radiated Emissions @ 3 m (Tx/Rx) EUT Orientation: Orthogonal Position 3