MN3BT3023Bluetooth Keyboard

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. (GFSK) 2.402-2.480 GHz

AbleNet Inc. 2625 Patton Road Roseville, MN 55113 United States FCC Confidentiality Request Number: CF303 Version: V01 Date: 01-02-2010 To the FCC and FCC TCB handling this application for certification Pursuant to 47 CFR Section 0.459(a) & (b), we, (the applicant / grantee) Company name AbleNet Inc. Addresss 2625 Patton Road Roseville, MN 55113 City Roseville Country United States request non-disclosure and confidential treatment for our certification under: Grantee Code Product Number FCC ID: MN3 BT3023 of the following materials submitted within this certification application: (please cross what is applicable, or add other documents) √ Operational Description √ Block Diagrams √ Schematics Diagrams Bill of Materials Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. We understand that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. Attestation: City and Country: Date: Name: (this must be a person) Function:Signature: (or official company stamp) Roseville 2015/11/24 Joe Volp Director of Marketing

AbleNet Inc. 2625 Patton Road Roseville, MN 55113 United States FCC Authorization Letter Number: CF304 Version: V01 Date: 01-02-2010 We, (the approval holder) Company name AbleNet Inc. Addresss 2625 Patton Road Roseville, MN 55113 City Roseville Country United States declare that the following representative (agent): Name (person) Ruby.zhang Company name Compliance Certification Services (Shenzhen) Inc. Addresss No.10-1 Mingkeda Logistics park, No.18 Huanguan South Road. Guan Lan Town, Baoan District, Shenzhen, China City Shenzhen, Country China is hereby authorized to apply the following equipment for certification on our behalf: Product Description BigBlu Keyboard Type or Model(s) BBK, BBV Tradename or Brand(s) We also authorize Teleconformity, Mr. M. Koop, (address: Rietven 31, 7534NH Enschede, Netherlands) to process this application. Attestation: City and Country: Date: Name: (this must be a person) Function:Signature: (or official company stamp) Roseville 2015/11/24 Joe Volp Director of Marketing

Report No.: C151028Z02 1 / 2 External Photos of EUT Report No.: C151028Z02 2 / 2

151000001 R K K

Report No: C151028Z02 Page 1 / 4 Internal Photos of EUT Report No: C151028Z02 Page 2 / 4 Antenna RF module Report No: C151028Z02 Page 3 / 4 Report No: C151028Z02 Page 4 / 4

FCC RF Exposure FCC ID: MN3BT3023 Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Portable Device Refer Standard: KDB 447498 D01 General RF Exposure Guidance v05r02 FCC Part 2 §2.1093 Evaluation method According to KDB447498 D01 General RF Exposure Guidance v05r01Section 4.3.1 Standalone SAR test exclusion considerations:“ Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Conducted Power Results Bluetooth Mode Channel Frequency (MHz) Average Conducted Output Power (dBm) GFSK 00 2402 -4.72 39 2441 -4.23 78 2480 -3.10 Manufacturing tolerance Bluetooth GFSK (Average) Channel Channel 00 Channel 39 Channel 78 Target (dBm) -4.0 -4.0 -3.0 Tolerance ±(dB) 1.0 1.0 1.0 Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BT* 2.450 5 -2.0 0.63 0.2<3.0 Yes BT*-BT including BLE (lower power BT) Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v05r02. .......................End of Report.........................

Report No.: C151028Z02-RP1 FCC ID: MN3BT3023 Page 1 / 43 FCC 47 CFR PART 15 SUBPART C TEST REPORT For BigBlu KinderBoard Model: BBK, BBV Brand: Test Report Number: C151028Z02-RP1 Prepared for AbleNet Inc. 2625 Patton Rd. Roseville, MN 55113-1137 Prepared by COMPLIANCE CERTIFICATION SERVICES (SHENZHEN) INC. No.10-1, Mingkeda Logistics Park, No.18, Huanguan South Rd., Guan Lan Town, Baoan District, Shenzhen China TEL: 86-755-28055000 FAX: 86-755-28055221 E-Mail: [email protected] Issued Date: November 9, 2015 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services (Shenzhen) Inc. This document may be altered or revised by Compliance Certification Services (Shenzhen) Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, A2LA, NVLAP, NIST, CNAS or any government agencies. The test result of this report relate only to the tested sample identified in this report. 检 测 CNAS L4818 Report No.: C151028Z02-RP1 FCC ID: MN3BT3023 Page 2 of 43 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 November 9, 2015 Initial Issue ALL Sinphy Xie Report No.: C151028Z02-RP1 FCC ID: MN3BT3023 Page 3 of 43 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ..................................................................................... 4 2. EUT DESCRIPTION .......................................................................................................... 5 3. TEST METHODOLOGY .................................................................................................... 6 3.1 DESCRIPTION OF TEST MODES ................................................................................. 6 4. FACILITIES AND ACCREDITATIONS ............................................................................. 7 4.1 FACILITIES .................................................................................................................... 7 4.2 ACCREDITATIONS ....................................................................................................... 7 4.3 MEASUREMENT UNCERTAINTY ................................................................................. 7 5. SETUP OF EQUIPMENT UNDER TEST .......................................................................... 8 5.1 SETUP CONFIGURATION OF EUT .............................................................................. 8 5.2 SUPPORT EQUIPMENT .............................................................................................. 8 6. FCC PART 15.247 REQUIREMENTS .............................................................................. 9 6.1 20DB BANDWIDTH ....................................................................................................... 9 6.2 ANTENNA GAIN .......................................................................................................... 12 6.3 PEAK POWER ............................................................................................................. 13 6.4 PEAK POWER SPECTRAL DENSITY ......................................................................... 15 6.5 BAND EDGES MEASUREMENT ................................................................................. 16 6.6 FREQUENCY SEPARATION ...................................................................................... 22 6.7 NUMBER OF HOPPING FREQUENCY ....................................................................... 24 6.8 TIME OF OCCUPANCY (DWELL TIME) ...................................................................... 26 6.9 SPURIOUS EMISSIONS ............................................................................................. 30 6.10 POWERLINE CONDUCTED EMISSIONS ................................................................. 42 Report No.: C151028Z02-RP1 FCC ID: MN3BT3023 Page 4 of 43 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. TEST RESULT CERTIFICATION Product: BigBlu KinderBoard Model: BBK, BBV Brand: Tested: October 28~November 5, 2015 Applicant: AbleNet Inc. 2625 Patton Rd. Roseville, MN 55113-1137 Manufacturer: ACCESSPRO ELECTRONICS CO., LTD. ROOM 3B27, 3F, NO.5, SEC. 5, HSIN-YI ROAD, TAIPEI CITY, TAIWAN APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services (Shenzhen) Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10:2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.207, 15.209 and 15.247. The test results of this report relate only to the tested sample EUT identified in this report. Approved by: Reviewed by: Sunday Hu Supervisor of EMC Dept. Compliance Certification Services (Shenzhen) Inc. Ruby Zhang Supervisor of Report Dept. Compliance Certification Services (Shenzhen) Inc. Report No.: C151028Z02-RP1 FCC ID: MN3BT3023 Page 5 of 43 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 2. EUT DESCRIPTION Product BigBlu KinderBoard Model Number BBK, BBV Brand Model Discrepancy There is not any difference in the product, just the color combination is different, BBV is with white keycaps and BBK is with color keycaps. Identify Number C151028Z02-RP1 Received Date October 28, 2015 Power Supply DC1.5V×2 supply by the battery Frequency Range 2402 ~ 2480 MHz Transmit Power Peak : -2.78…

Text truncated - open the document above for the full version.

Report No.: C151028Z02-RP1 FCC ID : MN3BT3023 Page 1 / 1 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST