MTD-0009Model TAG-008 ID badge tag

© 2019 by TimeKeeping Systems, Inc. www.guard1.com GUARD1 /tracking ID Badge Tag © 2019 by TimeKeeping Systems, Inc. www.guard1.com The Guard1 Tracking ID Badge Tag (TAG-008) is a completely sealed and reusable device with a long-life battery. It is worn on a lanyard or in a pocket of individuals to be tracked within facilities utilizing the Guard1 Tracking system. To use Guard1 Tracking ID Badge Tags you will need:  Lanyards (if desired)  Guard1 Tracking ID Badge Tags  Guard1 Tracking System Instructions:  Individuals to be tracked wear the tag on a lanyard or in a pocket.  The Guard1 Tracking Wristband Tag may be reused during the useful life of the battery. © 2019 by TimeKeeping Systems, Inc. www.guard1.com FCC Statements: This equipment has been tested and found to comply with the limits for Class B digital devices pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and the receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by TimeKeeping Systems, Inc. could void the user's authority to operate the equipment. This device is exempt from SAR Evaluation, per §4.3.1 of KDB 447498. Industry Canada Statements: English French This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device is exempt from SAR Evaluation, per RSS-102 §2.5.1. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil est exempt de l'évaluation SAR, selon RSS-102 §2.5.1.

Page 1 of 1 RP-9206L 12 Devonwood Ave SOL VING A WAV E OF EMI COMP LIANCE PR OB LE MS Romeoville, IL 60446 Tel: (815) 293-0772 Federal Communications Commission February 20, 2020 Authorization and Evaluation Division 7435 Oakland Mills Rd. Columbia, MD 21046 Reference FCC ID: MTD-0009 Organization: TimeKeeping Systems, Inc. 1. Long Term Confidentiality In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (TimeKeeping Systems, Inc.) hereby requests permanent confidential treatment of information accompanying this application as outlined below: (1) Circuit Schematics (2) Block Diagrams (3) Operational Description (4) Internal printed circuit board photographs The printed circuit board and all internal components of this device are entirely encased in opaque epoxy and not accessible to users, therefore the internal photographs can be held confidential The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. They are considered confidential trade secrets Authorized Signature Joseph Strzelecki Senior EMC Engineer Radiometrics Midwest Corporation Authorized Agent for TimeKeeping Systems, Inc.

ID Badge Tag, Model: TAG-008, FCC ID: MTD-0009, IC No.: 12375A-0009 External Photos Exterior front Exterior, back

Authorized Agent: Radiometrics Midwest Corporation (815) 293-0772 ID Label/Location Drawing of label The Label will be etched onto the EUT Dimensions are in inches Radiometrics Midwest Corporation (815) 293-0772 – [email protected] Dimensions of product in inches.

Authorized Agent: Radiometrics Midwest Corporation (815) 293-0772 RF Exposure FCC ID: MTD-0009 1.0 INTRODUCTION These calculations are based on the highest EIRP possible from the EUT considering maximum power and antenna gain. The highest output power of the EUT is 2.56 mW and the gain of the antenna is 0 dBi. The duty cycle of the EUT is 0.2 %, therefore, the average power is 0.005 mW. The calculations are based on 1 % duty cycle to show a worst case. 1.0 SAR EXCLUSION RESULT In accordance with FCC KDB Publication 447498 D01 V05R06 Clause 4.3.1 a), The 1‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power, mW)/(min. separation distance, mm)] x [√f (GHz)] ≤ 3.0 for 1‐g extremity SAR, where ‧ f (GHz) is the RF channel transmit frequency in GHz MHz Max Power dBm Tune up tolerance dB Max Ant Gain dBi Duty Cycle % EIRP mW Min Sep mm SAR Exc Threshold 4.3.1 a) Limit 1-gResult 24023.91.001.00.03150.00953.0Exempt 24264.11.001.00.03250.01003.0Exempt 24803.71.001.00.03050.00943.0Exempt Judgement: The product is exempt from SAR testing 2.0 MPE CALCULATION FROM OET 65 & FCC 1.1310 MHz Max Power dBm Tune up Tolerance dB Max Ant Gain dBi Duty Cycle % EIRP mWatts (S) GP Limit mW/cm^2 Declared Minimum seperation Distance (cm) EUT power Density mW/cm2 Result 24023.91.001.00.03061.0000.5000.0097Pass 24264.11.001.00.03221.0000.5000.0103Pass 24803.71.001.00.02971.0000.5000.0095Pass Notes on the above table: In accordance with OET 65, 97-01, Power Density is calculated by S = P*G/(4*π*R^2) Where S = power density (mW/cm2) P = power input to the antenna (mW) G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna (cm) S is the power density General Population Limit from FCC 1.1310 Table 1 EIRP Power is the Peak Effective Radiated Power. EIRP = (Average Conducted Power + Antenna gain) * Duty Cycle. Since the calculated power density is less than the limit, this product fully meets the OET 65 requirements for the general population.

Radiomet.com Page 1 of 15 Electromagnetic Compatibility Test Report Tests Performed on a Timekeeping Systems ID Badge Transciever, Model Tag-008 Radiometrics Document RP-9206 Product Detail: FCC ID: MTD-0009 IC: 12375A-0009 Equipment type: 2.4 GHz transmitter Test Standards: US CFR Title 47, Chapter I, FCC Part 15 Subpart C FCC Part 15 CFR Title 47: 2020 Canada ISED; RSS-210, Issue 9: 2016 as required for Category I Equipment IC RSS-GEN Issue 5: 2018 This report concerns: Original Grant for Certification FCC Part 15.249 Tests Performed For: Test Facility: Timekeeping Systems 30100 Bainbridge Road, Suite H Solon, Ohio 44139 Radiometrics Midwest Corporation 12 Devonwood Avenue Romeoville, IL 60446-1349 (815) 293-0772 Test Date(s): December 13 to January 3, 2020 Document RP-9206 Revisions: Rev. Issue Date Revised By 0 February 6, 2020 Radiometrics Midwest Corporation Testing of: Timekeeping Systems, Model Tag-008, ID Badge RP-9206 Rev. 0 Radiomet.com Page 2 of 15 Contents 1.0 ADMINISTRATIVE DATA .............................................................................................................. 3 2.0 TEST SUMMARY AND RESULTS ................................................................................................ 3 3.0 EQUIPMENT UNDER TEST (EUT) DETAILS ............................................................................... 4 3.1 EUT Description ......................................................................................................................... 4 3.1.1 FCC Section 15.203 & RSS-GEN Antenna Requirements ................................................... 4 4.0 TESTED SYSTEM DETAILS ......................................................................................................... 4 4.1 Tested System Configuration ..................................................................................................... 4 4.2 EUT Operating Modes ............................................................................................................... 4 4.3 Special Accessories ................................................................................................................... 4 4.4 Equipment Modifications ............................................................................................................ 4 5.0 TEST SPECIFICATIONS............................................................................................................... 5 6.0 TEST PROCEDURE DOCUMENTS .............................................................................................. 5 7.0 RADIOMETRICS’ TEST FACILITIES ............................................................................................ 5 8.0 DEVIATIONS AND EXCLUSIONS FROM THE TEST SPECIFICATIONS .................................... 6 9.0 CERTIFICATION ........................................................................................................................... 6 10.0 TEST EQUIPMENT TABLE ......................................................................................................... 6 11.0 TEST SECTIONS ........................................................................................................................ 7 11.1 Radiated RF Emissions ............................................................................................................ 7 11.1.1 Field Strength Calculation .................................................................................................. 7 11.1.2 Radiated Emissions Test Results ...................................................................................... 8 11.2 Occupied Bandwidth Data ...................................................................................................... 10 11.3 Duty Cycle .............................................................................................................................. 12 11.4 Peak Output Power ................................................................................................................ 15 11.4.1 Measurement Instrumentation Uncertainty ...................................................................... 15 12.0 REVISION HISTORY ................................................................................................................ 15 Notice: This report must not be reproduced (except in full) without the written approval of Radiometrics Midwest Corporation. Radiometrics Midwest Corporation Testing of: Timekeeping Systems, Model Tag-008, ID Badge RP-9206 Rev. 0 Radiomet.com Page 3 of 15 1.0 ADMINISTRATIVE DATA Equipment Under Test: A Timekeeping Systems, ID Badge Model: Tag-008 Serial Number: None This will be referred to as the EUT in this Report Date EUT Received at Radiometrics: Test Dates: December 12, 2020 December 13 to January 3, 2020 Test Report Written and Authorized By: Test Witnessed By: Joseph Strzelecki Senior EMC Engineer The tests were not witnessed by personnel from Timekeeping Systems. Radiometrics’ Personnel Responsible for Test: EUT Checked By: 02/05/2020 Date Joseph Strzelecki Senior EMC Engineer NARTE EMC-000877-NE Dave Jarvis EMC Technician Richard L. Tichgelaar EMC Technician Joseph Strzelecki Richard Tichgelaar Dave Jarvis Radiometrics 2.0 TEST SUMMARY AND RESULTS The EUT (Equipment Under Test) is an ID Badge, Model Tag-008, manufactured by Timekeeping Systems. The detailed test results are presented in a separate section. The following is a summary of the test results. Emissions Tests Results Environmental Phenomena Frequency Range Basic Standard Test Result RF Radiated Emissions 30-25,000 MHz RSS-210 & FCC Part 15 Pass Occupied Bandwidth Test Fundamental Freq. RSS-210 & FCC Part 15 Pass Since the EUT is battery operated, no AC conducted emissions were performed. IEC 17025 Decision Rule: The declaration of pass or fail is based on the specifications listed above. The declaration of pass or fail did not consider measurement uncertainty. Radiometrics Midwest Corporation Testin…

Text truncated - open the document above for the full version.

Authorized Agent: Radiometrics Midwest Corporation (815) 293-0772 Test Setup Photographs Photographs of Radiated Emissions Test Setup Authorized Agent: Radiometrics Midwest Corporation (815) 293-0772 The EUT was taped to a foam stand to change the axis of rotation. Authorized Agent: Radiometrics Midwest Corporation (815) 293-0772 Photograph of OBW Test Setup