N33MC1825EWRIDigital Caliper / Universal Caliper

                                8.2 ON / OFF / RESET 8.2 ON / OFF / RESET 8.2 ON / OFF / RESET 8.2 ON / OFF / RESET 8.2 ON / OFF / RESET 8.2 开关/置零 8.3 DATA / HOLD -Funktion 8.3 DATA / HOLD function 8.3 Fonction DATA / HOLD 8.3 Función DATOS / HOLD 8.3 Funzione DATA / HOLD 8.3 数据传输/保持功能 Batterie • Nicht wiederaufladbar • Nicht ins Feuer werfen • Vorschriftsgemäß entsorgen Keine Elektrosigniereinrichtungen verwenden ! 4. Sicherheitshinweis Battery • not rechargeable • do not incinerate • dispose off as prescribed Do not use an electric marking tool ! 4. Safety Information Pile • elle ne se recharge pas • ne pas la jeter au feu • s’en débarrasser conformément aux réglements Ne pas utiliser de marqueur électrique ! 4. Indications de Sécurité Batería • No recargable • No arrojarla al fuego • Eliminarla reglamentariamente No utilice marcadores electrónicos ! 4. Indicación de seguridad 4. 安全须知 电池 • 禁止充电 • 禁止焚烧 • 按规定方式处理 禁止在此产品上进行电子标刻 ! Batteria • non ricaricabile • non gettare nel fuoco • smaltire secondo le prescrizioni Non utilizzare penne elettriche per la marcatura ! 4. Avvertenze di sicurezza 1. Bestimmungsgemäße Verwendung Das Messgerät 18 EWRi dient zum Messen von Längenmaßen in der Produktion, in der Qualitätssicherung oder in der Werkstatt. Die bestimmungsgemäße Verwendung erfordert das Beachten aller veröffentlichten Informationen zu diesem Produkt. Eine andere oder darüber hinausgehende Benutzung gilt als nicht bestimmungsge- mäß. Für hieraus entstehende Schäden haftet der Hersteller nicht. Beachten Sie die für den Einsatzbereich geltenden gesetzlichen und anderweitigen Vorschriften und Richtlinien. Vor Inbetriebnahme des Geräts empfehlen wir Ihnen diese Bedie- nungsanleitung aufmerksam zu lesen. 1. Uso previsto Il strumento 18 EWRi serve a misurare la lunghezza in fase di produ- zione e assicurazione qualità o in officina. L‘uso previsto richiede l‘osservanza di tutte le informazioni pubblicate su questo prodotto. Qualsiasi altro utilizzo è considerato non appro- priato. Il produttore non è responsabile degli eventuali danni. Attenersi alle norme di legge e alle altre prescrizioni e linee guida vigenti per il campo di applicazione considerato. Per utilizzare al meglio il calibro è importante leggere il manuale di istruzioni 1. Permitted use The measuring instrument 18 EWRi is to be used to determine length measurements and can be employed in production, quality control and in the workshop. Permitted use is subject to compliance with all published information relating to this product. Any other use is not in accordance with the permitted use. The manufacturer accepts no liability for damages resulting from improper use. All statutory and other regulations and guidelines applicable to the area of use must be observed. In order to achieve the best use of this instrument it is most important that you read the operating instructions first. 1. Utilisation conforme à l’usage prévu La appareil de mesure 18 EWRi sert à la mesure de longueurs en production, en assurance qualité ou en atelier. L’utilisation conforme à l’usage prévu nécessite le respect de toutes les informations publiées sur ce produit. Toute utilisation différente ou sortant du cadre de cette spécification est considérée comme non-conforme. Le fabricant décline toute responsabilité pour les dommages qui en découlent. Respecter les prescriptions et directives légales et autres en vigueur pour le domaine d’utilisation. Avant la première mise en service, nous vous recommandons de lire attentivement ce mode d’emploi. 1. Aplicación según el uso previsto El aparato de medición 18 EWRi sirve para medir longitudes en el área de producción, en el departamento de aseguramiento de la calidad o en el taller. La aplicación según el uso previsto requiere que se observen todas las informaciones publicadas acerca de este producto. Un uso distinto al especificado aquí se considera no conforme al uso previsto. Así pues, el fabricante declina toda responsabilidad por los daños que puedan surgir como consecuencia de ello. Observe las normativas y directivas legales y de otro tipo que se encuentren en vigor para el campo de aplicación de que se trate. Antes de la puesta en servicio le recomendamos que lea atentamente este manual de instrucciones 1. 许可使用范围 测量仪器 18 EWRi 用于长度测量，可在生产、质控过程 及车间中使用。 客户须根据本产品已发布所有信息中规定的允许范围， 合理使用本产品，其他未涉及到用途，请在使用前，与 Mahr 进行必要的确任。Mahr对因操作不当造成的损坏， 不承担任何责任。客户在使用本产品的过成中，须遵守其 所在区域、国家的所有法律、法规及指南。 为了更好地使用该测量仪器，请在使用前 仔细阅读操作 说明书。 2. Lieferumfang Zur Grundausstattung des Messgeräts 18 EWRi gehören: – Digitaler Messschieber 18 EWRi – Batterie CR2032 – Schlüssel für Batteriedeckel – Bedienungsanleitung 2. Delivery The basic measuring instrument 18 EWRi consists of: – Digital Caliper 18 EWRi – Battery CR2032 – Battery cover wrench – Operating instructions 2. L’équipement de base L’équipement de base de la appareil de mesure 18 EWRi comprend: – la pied à coulisse digital 18 EWRi – la pile CR2032 – Clé à batterie – la notice d’emploi 2. El equipamiento básico El equipamiento básico del aparato de medición 18 EWRi incluye: – pie de rey digital 18 EWRi – batería CR2032 – Llave de batería – manual de instrucciones 2. La fornitura di base La fornitura di base dello strumento 18 EWRi comprende: – La fornitura di base dello strumento 18 EWRi comprende: – batteria CR2032 – chiave della batteria – manuale d‘uso 2. 标准配置清单 18 EWRi的基本配置如下： – 18 EWRi数显卡尺 – 电池 CR2032 – 电池扳手 – 操作使用说明书 6.1 Beschreibung 6.1 Description 6.1 Description 6.1 Descripción 6.1 Descrizione 6.1 描述 1 Batteriefach 1 Battery compartment 1 Rangement pile 1 Compartimento de la batería 1 Vano batteria 1 电池盒 2 Bedientasten 2 Operating buttons 2 Touches de commande 2 Teclas de funcionamiento 2 Tasti di comando 2 操作按键 3 Innenmessflächen 3 I. D.-measuring faces 3 Mesure interieure 3 Superficies de medición interiores 3 Superfici di misura per interni 3 内量爪测量面 4 Außenmessflächen 4 O. D.-measuring faces 4 Faces mes…

Text truncated - open the document above for the full version.

0920 Bedienungsanleitung Operating Instructions Instructions de Service Manual de instrucciones Manuale di Istruzioni 操作使用说明书 Digitaler Universal-Messschieber Universal Digital Caliper Pied à coulisse digital universel Pie de rey digital universal Calibro universale digitale Universal 数显卡尺 Multimar 25 EWRi 3723539 Änderungen an unseren Erzeugnissen, besonders auf- grund technischer Verbesserungen und Weiterentwicklun- gen, müssen wir uns vorbehalten. Alle Abbildungen und Zahlenangaben usw. sind daher ohne Gewähr. We reserve the right to make changes to our products, especially due to technical improvements and further developments. All illustrations and technical data are therefore without guarantee. Nous nous réservons le droit de modifier l’exécution de tous nos appareils, en fonction des évolutions techni- ques. Les caractéristiques techniques et illustrations ne sont données qu’à titre indicatif. Queda reservado el derecho de modificaciones en nuestros productos en aras de una mejora técnica o una evolución. Se declina toda responsabilidad por las imágenes y los datos numéricos. Ci riserviamo il diritto di modificare i ns. prodotti in funzione delle evoluzioni tecniche. Le caratteristiche tecniche e le illustrazioni sono solo a titolo indicativo. 我们保留对产品进行改进的权力，特别是对于 技术方面的改进，对所有的图例和技术数据， 我们保留最终解释权。 © by Mahr GmbH IP67   Confirmación de la rastreabilidad Declaramos, bajo nuestra propia responsabilidad, que el producto cumple en cuanto a calidad las normas y los datos técnicos que se especifican en nuestros documentos de compra (manual de instrucciones, prospecto, catálogo). Confirmamos que los instrumentos de verificación utilizados en la comprobación de este producto, protegidos por nuestro sistema de aseguramiento de la calidad, se remiten a patrones nacionales. Le agradecemos la confianza que ha depositado en nosotros al adquirir este producto.  Bestätigung der Rückführbarkeit Wir erklären in alleiniger Verantwortung, dass das Produkt in seinen Qualitätsmerkmalen den in unseren Verkaufsunterlagen (Bedienungs- anleitung, Prospekt, Katalog) angegebenen Normen und technischen Daten entspricht. Wir bestätigen, dass die bei der Prüfung dieses Produktes verwendeten Prüfmittel, abgesichert durch unser Qualitätssicherungssystem, auf nationale Normale rückführbar sind. Wir danken Ihnen für das uns mit dem Kauf dieses Produktes entgegen- gebrachte Vertrauen.  Confirmation of traceability We declare under our sole responsibility that this product is in conformity with standards and technical data as specified in our sales documents (operating instructions, leaflet, catalogue). We certify that the measuring equipment used to check this product, and guaranteed by our Quality Assurance, is traceable to national standards. Thank you very much for your confidence in purchasing this product.  Confirmation sur la traçabilité Nous déclarons sous notre seule responsabilité que sa qualité est conforme aux normes et données techniques contenues dans nos docu- ments de vente (instructions de service, documentation, catalogue). Nous attestons que l’équipement utilisé pour la vérification de ce produit est valablement raccordé aux normes nationales, dont le raccordement est assuré par notre système de qualité. Nous vous remercions de la confiance témoignée par l’achat de ce produit.  Conferma di tracciabilità Dichiariamo sotto la ns. unica responsabilità, che questi prodotti sono conformi alle norme e dati tecnici standard come specificato nei ns. documenti di vendita (manuale di istruzioni, documentazione, catalogo). Certifichiamo che gli strumenti utilizzati per testare questi prodotti e garantiti dal ns. Sistema di Qualità, sono collegati alle Norme Nazionali. Grazie per aver acquistato questo prodotto.  可追溯性声明 我们声明此产品符合相关标准和我们销售资料 （操作指导书，宣传册，产品目录）中提供的技术参数， 我们品质部门保证用于检定该产品的测量设备已 得到检验校准， 并可以追溯到相应的国家标准。 非常感谢您的信任并选择这款产品 8.1 Auto ON / OFF 8.1 Auto ON / OFF 8.1 Auto ON / OFF 8.1 Encendido / Apagado automático 8.1 Auto ON / OFF 8.1 自动开/关 Auto ON / Auto OFF Durch Bewegen des Schiebers schaltet sich das Gerät automatisch ein. Das Gerät schaltet sich bei Nichtnutzung nach voreingestellter Zeit ab, (Werkseinstellung 8 Min., siehe 8.5.2 und 8.5.3). Sicherheit durch Reference Funktion: Der zuletzt angezeigte Messwert bleibt trotz Auto-Off erhalten, die zuletzt eingestellte 0-Position oder Preset-Einstellung ist damit gesichert. Auto OFF / Auto ON Movement of the slide will automatically switch ON the instrument. The instrument switches OFF after a preset time when not in use, (factory setting 8 min., see 8.5.2 and 8.5.3). Safety through reference function: The last measured value displayed is retained despite Auto-Off, the last set 0 position or preset setting is thus saved. Auto OFF / Auto ON L’allumage de l’appareil se fera par simple mouvement de la coulisse. L‘appareil s‘éteint après une durée prédéfinie lorsqu‘il n‘est pas utilisé, (réglage d‘usine 8 min., voir 8.5.2 et 8.5.3). Sécurité grâce à la fonction Reference : La dernière valeur de mesure affichée est conservée malgré l’Auto-Off, la dernière position 0 définie ou le dernier réglage Preset est ainsi sauvegardé(e). Encendido / Apagado automático Moviendo la corredera el aparato se apaga automáticamente. El dispositivo se apaga después de un tiempo preestablecido cuando no está en uso (ajuste de fábrica 8 min. consulte 8.5.2 e 8.5.3). Seguridad gracias a la función Reference: El valor medido mostrado por última vez se mantiene a pesar del apagado automático, por lo que la última posición 0 configurada o el último preajuste establecido se guardan. Auto OFF / Auto ON Muovendo il cursore lo stesso si riaccenderà automaticamente. Il dispositivo si spegne dopo un tempo prestabilito quando non viene utilizzato (impostazione di fabbrica 8 min. vedere 8.5.2 e 8.5.3). Sicurezza grazie alla funzione Reference: L’ultimo valore di misura visualizzato viene mantenuto nonostante la funzione auto-off, in tal modo viene salvata l‘ultima posi…

Text truncated - open the document above for the full version.

Annex A 1-9746/19-01-01_AnnexA External photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Mihail Dorongovskij Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1 Photo 2 2020-03-20Document No. 1-9746/19-01-01_AnnexA2/7 Photo 3 Photo 4 2020-03-20Document No. 1-9746/19-01-01_AnnexA3/7 Photo 5 Photo 6 2020-03-20Document No. 1-9746/19-01-01_AnnexA4/7 Photo 7 Photo 8 2020-03-20Document No. 1-9746/19-01-01_AnnexA5/7 Photo 9 2020-03-20Document No. 1-9746/19-01-01_AnnexA6/7 Document history VersionApplied changesDate of release initial release2020-03-20 - END OF DOCUMENT - 2020-03-20Document No. 1-9746/19-01-01_AnnexA7/7

N33MC1825EWRI 10315A - 1825EWRI HVIN: 401.460.41.0101.0_00 10315A-MC1825EWRI

N33MC1825EWRI 10315A - 1825EWRI HVIN: 401.460.41.0101.0_00 10315A-MC1825EWRI

BNetzA - CAB - 02/21 - 102 TEST REPORT Test report no.: 1-9746/19-01-05-A Testing laboratory Applicant CTC advanced GmbH Untertuerkheimer Strasse 6 – 10 66117 Saarbruecken / Germany Phone: + 49 681 5 98 - 0 Fax: + 49 681 5 98 - 9075 Internet: http://www.ctcadvanced.com e-mail: [email protected] Accredited Testing Laboratory: The testing laboratory (area of testing) is accredited according to DIN EN ISO/IEC 17025 (2005) by the Deutsche Akkreditierungsstelle GmbH (DAkkS) The accreditation is valid for the scope of testing procedures as stated in the accreditation certificate starting with the registration number: D-PL-12076-01. Mahr GmbH Reutlinger Straße 48 73728 Esslingen / GERMANY Phone: -/- Contact: Thomas Engler e-mail: [email protected] Phone: +49 711 9312-673 Manufacturer Mahr GmbH Reutlinger Straße 48 73728 Esslingen / GERMANY Test standard/s FCC - Title 47 CFR Part 15 FCC - Title 47 of the Code of Federal Regulations; Chapter I; Part 15 - Radio frequency devices RSS - 210 Issue 10 Radio Standards Specification - Licence-Exempt Radio Apparatus: Category II Equipment For further applied test standards please refer to section 3 of this test report. Test Item Kind of test item: Digital Caliper / Universal Caliper Model name: MarCal 18EWRi; Multimar 25EWRi FCC ID: N33MC1825EWRI IC: 10315A–MC1825EWRI Frequency: DTS band 2400 MHz to 2483.5 MHz Technology tested: ANT+ Antenna: Integrated antenna Power supply: 3.0 V DC by battery CR2032 Temperature range: +10°C to +45°C This test report is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Test report authorized: Test performed: Michael Dorongovski Marco Bertolino Lab Manager Lab Manager Radio Communications Radio Communications Test report no.: 1-9746/19-01-05-A © CTC advanced GmbH Page 2 of 40 1 Table of contents 1 Table of contents ............................................................................................................................................. 2 2 General information ......................................................................................................................................... 3 2.1 Notes and disclaimer ............................................................................................................................ 3 2.2 Application details ................................................................................................................................ 3 2.3 Test laboratories sub-contracted ......................................................................................................... 3 3 Test standard/s, references and accreditations .............................................................................................. 4 4 Test environment ............................................................................................................................................. 5 5 Test item .......................................................................................................................................................... 5 5.1 General description ............................................................................................................................... 5 5.2 Additional information .......................................................................................................................... 5 6 Sequence of testing ......................................................................................................................................... 6 6.1 Sequence of testing radiated spurious 9 kHz to 30 MHz ..................................................................... 6 6.2 Sequence of testing radiated spurious 30 MHz to 1 GHz .................................................................... 7 6.3 Sequence of testing radiated spurious 1 GHz to 18 GHz ..................................................................... 8 6.4 Sequence of testing radiated spurious above 18 GHz ......................................................................... 9 7 Description of the test setup.......................................................................................................................... 10 7.1 Shielded semi anechoic chamber ....................................................................................................... 11 7.2 Shielded fully anechoic chamber ........................................................................................................ 12 7.3 Radiated measurements > 18 GHz ...................................................................................................... 13 7.4 Conducted measurements Bluetooth system .................................................................................... 14 8 Summary of measurement results ................................................................................................................ 15 9 Additional comments ..................................................................................................................................... 16 10 EUT classification ....................................................................................................................................... 17 11 Measurement results.................................................................................................................................. 18 11.1 Timing of the transmitter................................................................................................................. 18 11.2 Occupied bandwidth – 99% bandwidth ........................................................................................... 19 11.3 Maximum field strength .................................................................................................................. 20 11.4 Band edge compliance radiated ................................…

Text truncated - open the document above for the full version.

Measurement Results 1-9746/19-01-05_Annex_MR_A_1 Test logging This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Mihail Dorongovskij Lab Manager Radio Communications CTC advanced GmbHUntertuerkheimer Strasse 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Table of Content IUT Summary3 1. FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G44 2. Hardcopy Spectrum Analyzer ~ 11 3. Hardcopy Spectrum Analyzer ~ 13 4. Hardcopy Spectrum Analyzer ~ 15 5. Hardcopy Spectrum Analyzer ~ 17 6. Hardcopy Spectrum Analyzer ~ 19 7. Hardcopy Spectrum Analyzer ~ 21 Document No. 1-9746/19-01-05_Annex_MR_A_12/22 IUT Summary IUT DEFINITION & Common settings ManufacturerMahr GmbH TypeMarCal 18EWRI; Multimar 25EWRI Serial No. | Setup No.02010247 | 1.0 SW Version | HW VersionNI | NI Comment 1 | 2 | Tlow | Tmid | Thigh [°C] 10 | 20 | 45 Vlow | Vmid | Vhigh [V] @Imax [A] 2.4 | 3 | 3.3 @1 Auto Control enabled Power Supply | Climatic BoxNo | No Antenna Gain [dBi]0 Additional Path Loss [dB]0 IUT Common Settings 2G4 Hopping supported No Burst length [ms]10 Nominal Bandwidth [MHz]1.5 User InteractionYes Document No. 1-9746/19-01-05_Annex_MR_A_13/22 1. FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 Test References TC Start05.03.2020 10:04:20 System Version1.0.0.33 Test SpecificationFCC Part 15.247 Test Method Class / TC VersionTC_VM_FCC15247_Bandwidth_99PCT_20dB_DTS_FHSS_V01 Version: 0.0.2 My DescriptionFCC 15.247 Bandwidth 99PCT-20dB DTS - Generic 2G4 Add. Information Test Parameter Technology to testGeneric 2G4 Antenna Port used1 Temperaturemid Voltagemid Frequency low to testTrue | Freq [MHz] 2403 Frequency mid to testTrue | Freq [MHz] 2439 Frequency high to testTrue | Freq [MHz] 2475 Switched PathIUT - SignalingUnit - SpectrumAnalyzer Devices in use | SA: Rohde&Schwarz,FSV-30,1321.3008K30/103170,3.60 Document No. 1-9746/19-01-05_Annex_MR_A_14/22 Test at TX 2403 MHz READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]-0.98 | 9.81 | 5 Start [MHz] | Stop [MHz]2401.500 | 2404.500 RBW [MHz] | VBW [MHz]0.030000 | 0.100000 Detector | TraceModePOS | MAXH Sweep: Time [ms] | Count | Points per Section | Type50 | 1000 | 10001 | SWE RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Bandwidth 99%------916kHzINFO T1 99%2400.000000---2402.5389MHzPASS T2 99%---2483.5000002403.4551MHzPASS Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 99PCT_05032020_100533.png Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4_05032020_100537.png RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Bandwidth 20dB------927kHzINFO T1 20DB2400.000000---2402.5587MHzPASS T2 20dB---2483.5000002403.4854MHzPASS Document No. 1-9746/19-01-05_Annex_MR_A_15/22 Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 20dB_05032020_100543.png Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4_05032020_100546.png Document No. 1-9746/19-01-05_Annex_MR_A_16/22 Test at TX 2439 MHz READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]-0.28 | 9.9 | 5 Start [MHz] | Stop [MHz]2437.500 | 2440.500 RBW [MHz] | VBW [MHz]0.030000 | 0.100000 Detector | TraceModePOS | MAXH Sweep: Time [ms] | Count | Points per Section | Type50 | 1000 | 10001 | SWE RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Bandwidth 99%------941kHzINFO T1 99%2400.000000---2438.5248MHzPASS T2 99%---2483.5000002439.4659MHzPASS Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 99PCT_05032020_100659.png Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4_05032020_100703.png RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Bandwidth 20dB------1017kHzINFO T1 20DB2400.000000---2438.4699MHzPASS T2 20dB---2483.5000002439.4869MHzPASS Document No. 1-9746/19-01-05_Annex_MR_A_17/22 Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 20dB_05032020_100709.png Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4_05032020_100713.png Document No. 1-9746/19-01-05_Annex_MR_A_18/22 Test at TX 2475 MHz READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]-1.40 | 9.94 | 5 Start [MHz] | Stop [MHz]2473.500 | 2476.500 RBW [MHz] | VBW [MHz]0.030000 | 0.100000 Detector | TraceModePOS | MAXH Sweep: Time [ms] | Count | Points per Section | Type50 | 1000 | 10001 | SWE RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Bandwidth 99%------929kHzINFO T1 99%2400.000000---2474.5287MHzPASS T2 99%---2483.5000002475.4578MHzPASS Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 99PCT_05032020_100831.png Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4_05032020_100835.png RESULT Test DescriptionLower LimitUpper LimitMeasuredUnitVerdict Bandwidth 20dB------1009kHzINFO T1 20DB2400.000000---2474.4768MHzPASS T2 20dB---2483.5000002475.4860MHzPASS Document No. 1-9746/19-01-05_Annex_MR_A_19/22 Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4 20dB_05032020_100841.png Plot_FCC Part 15.247 Bandwidth 99PCT-20dB ~ Generic 2G4_05032020_100845.png TEST FINISHED General Verdict05.03.2020 10:08:45 / RT: 265 sPASS Document No. 1-9746/19-01-05_Annex_MR_A_110/22 2. Hardcopy Spectrum Analyzer ~ Test References TC Start09.03.2020 11:52:16 System Version1.0.0.33 Test SpecificationNone Test Method Class / TC VersionTC_VM_Hardcopy_Spectrum_Analyzer_V01 Version: 0.0.1 My DescriptionHardcopy Spectrum Analyzer Add. Information Test Parameter Technology to test Switched Path--- Devices in useSA: Rohde&Schwarz,FSV-30,1321.3008K30/103170,3.60 READ SA SETTINGS: RefLevel [dBm] | RefLevelOffset [dB] | InpAtt [dB]0.50 | 10.5 | 20 Start [MHz] | Stop [MHz]2403.000 | 2403.000 RBW [MHz] | VBW [MHz]1.000000 | 3.000000 Detector | TraceModeAPE | WRIT Sweep: Time [ms] | Count | Points per Section | Type100 | 0 | 691 | SWE HC_09032020_115218.png RESULT Test DescriptionLower Lim…

Text truncated - open the document above for the full version.

Annex D 1-9746/19-01-01_AnnexD Setup photos of the Equipment Under Test This addendum is electronically signed and valid without handwritten signature. For verification of the electronic signatures, the public keys can be requested at the testing laboratory. Document authorized: Mihail Dorongovskij Lab Manager Radio Communications & EMC CTC advanced GmbHUntertuerkheimer Str. 6-10 66117 Saarbruecken / Germany Phone: +49 681 5 98 - 0 Fax: +49 681 5 98 - 9075 web: ctcadvanced.com e-mail: [email protected] Photos Photo 1: EUT at the anechoic chamber Photo 2: EUT at the anechoic chamber 2020-03-20Document No. 1-9746/19-01-01_AnnexD2/7 Photo 3: EUT at the anechoic chamber Photo 4: EUT at the anechoic chamber 2020-03-20Document No. 1-9746/19-01-01_AnnexD3/7 Photo 5: EUT at the anechoic chamber Photo 6: EUT at the anechoic chamber 2020-03-20Document No. 1-9746/19-01-01_AnnexD4/7 Photo 7: EUT at the anechoic chamber Photo 8: EUT at the semi-anechoic chamber 2020-03-20Document No. 1-9746/19-01-01_AnnexD5/7 Photo 9: EUT at the semi-anechoic chamber 2020-03-20Document No. 1-9746/19-01-01_AnnexD6/7 Document history VersionApplied changesDate of release initial release2020-03-20 - END OF DOCUMENT - 2020-03-20Document No. 1-9746/19-01-01_AnnexD7/7