N5C90173701Pan/Tilt Mega-pixel IP Cam

Light Detector Micro-SD Card Slot PIR WPS Button External Speaker Internal Speaker Thermometer Ethernet Indication LED Status Indication LED SD Card LED Microphone IR LED Lens 7.9mm 16mm 54mm 64mm Ø9mm This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Report No.: 121219E04 1 of 22 CONSTRUCTION PHOTOS OF EUT Report No.: 121219E04 2 of 22 Report No.: 121219E04 20 of 22 Report No.: 121219E04 21 of 22 Report No.: 121219E04 22 of 22

(Fig.1) FCC ID: N5C90173701 FCC LABEL LOCATION The label will be permanently affixed at a conspicuous location on the device. Back Side: LABEL HERE

Report No.: 121219E04 3 of 22 Report No.: 121219E04 4 of 22 Report No.: 121219E04 5 of 22 Report No.: 121219E04 6 of 22 Report No.: 121219E04 7 of 22 Report No.: 121219E04 8 of 22 Report No.: 121219E04 9 of 22 Report No.: 121219E04 10 of 22 Report No.: 121219E04 11 of 22 Report No.: 121219E04 12 of 22 Report No.: 121219E04 13 of 22 Report No.: 121219E04 14 of 22 Report No.: 121219E04 15 of 22 Report No.: 121219E04 16 of 22 Report No.: 121219E04 17 of 22 Report No.: 121219E04 18 of 22 Report No.: 121219E04 19 of 22

Report No.: SA121219E04 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA121219E04 MODEL NO.: IC737w, IC737x (“x” can be A-Z or 0-9 or blank for marketing purpose) FCC ID: N5C90173701 RECEIVED: Dec. 19, 2012 TESTED: Dec. 28, 2012 ISSUED: Jan. 18, 2013 APPLICANT: StarVedia Technology Inc. ADDRESS: 4F.-1, No.32, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA121219E04 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION ...................................................................................................... 4 2. RF EXPOSURE LIMIT .............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION .................................................................................................... 5 5. ANTENNA GAIN....................................................................................................... 5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ........................... 6 Report No.: SA121219E04 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA121219E04 Original release Jan. 18, 2013 Report No.: SA121219E04 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Pan/Tilt Mega-pixel IP Cam BRAND NAME: StarVedia MODEL NO.: IC737w, IC737x (“x” can be A-Z or 0-9 or blank for marketing purpose) TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: StarVedia Technology Inc. TESTED DATE: Dec. 28, 2012 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: IC737w) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Oct. 26, 2012 ( Lori Chung, Specialist ) APPROVED BY : , DATE: Oct. 26, 2012 ( May Chen, Deputy Manager ) Report No.: SA121219E04 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN Brand Model Gain (dBi) (Include cable loss) Antenna Type Connecter Type Frequency Range (MHz to MHz) Micon Precise Corp 12-71109 0.89 Dipole U.FL 2400~2500 Report No.: SA121219E04 6 of 6 Report Format Version 5.0.0 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY (MHz) MAX POWER (mW) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/ cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 371.535 0.89 20 0.09073 1 --- END --- CONCLUSION: Both of the 2.4GHz and 5GHz WLAN can transmit simultaneously, the formula of calculated the MPE is: CPD 1 / LPD 1 + CPD 2 / LPD 2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.19107 / 1 + 0.26777 / 1 = 0.45884, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit.

Report No.: RF121219E04 1 of 52 Report Format Version 5.1.0 Reference No.: 110719E01, 120110E14 FCC TEST REPORT REPORT NO.: RF121219E04 MODEL NO.: IC737w, IC737x (“x” can be A-Z or 0-9 or blank for marketing purpose) FCC ID: N5C90173701 RECEIVED: Dec. 12, 2012 TESTED: Dec. 22 to 28, 2012 ISSUED: Jan. 18, 2013 APPLICANT: StarVedia Technology Inc. ADDRESS: 4F.-1, No.32, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS : No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (1): No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. TEST LOCATION (2): No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF121219E04 2 of 52 Report Format Version 5.1.0 Reference No.: 110719E01, 120110E14 Table of Contents RELEASE CONTROL RECORD ........................................................................................ 4 1. CERTIFICATION .................................................................................................... 5 2. SUMMARY OF TEST RESULTS ............................................................................ 6 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 7 3. GENERAL INFORMATION ..................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................... 8 3.2 DESCRIPTION OF TEST MODES ....................................................................... 10 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ........................ 11 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ....................................... 14 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................. 15 3.5 CONFIGURATION OF SYSTEM UNDER TEST ................................................... 15 4. TEST TYPES AND RESULTS .............................................................................. 16 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................ 16 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ...................................... 16 4.1.2 TEST INSTRUMENTS .......................................................................................... 16 4.1.3 TEST PROCEDURES .......................................................................................... 17 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 17 4.1.5 TEST SETUP ....................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ......................................................................... 18 4.1.7 TEST RESULTS ................................................................................................... 19 4.2 RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................ 21 4.2.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 21 4.2.2 TEST INSTRUMENTS .......................................................................................... 22 4.2.3 TEST PROCEDURES .......................................................................................... 23 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 23 4.2.5 TEST SETUP ....................................................................................................... 24 4.2.6 EUT OPERATING CONDITIONS ......................................................................... 24 4.2.7 TEST RESULTS ................................................................................................... 25 4.3 6dB BANDWIDTH MEASUREMENT .................................................................... 38 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT .................................................. 38 4.3.2 TEST INSTRUMENTS .......................................................................................... 38 4.3.3 TEST PROCEDURE ............................................................................................. 38 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 38 4.3.5 TEST SETUP ..............................................................................…

Text truncated - open the document above for the full version.

Report No.: 120927E07 1 of 2 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Report No.: 120927E07 2 of 2 RADIATED EMISSION TEST