N6C-SX10WAGSX-10WAG

Hardwarespecifications/Compliance2 2System Requirements4 3Setup 4 SX-10WAG Users Manual FCC IDN6C-SX10WAG NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment should be installed and operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Canada This device complies with Part 15 of the FCC Rules and RSS-Gen of the IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 1Hardwarespecifications/Compliance Operating environment Temperature+0°C to +60°C, +32F to +140F Humidity20% to 90% Storage environment Temperature-10°C to +70°C, +14F to +158F Humidity5% to 90% supply voltage 3.3V 0.3V Host I/F MiniPCI IEEE802.11b Frequency : 2412MHz~2462MHz Transmission system DS-SS Transmission speed 1M/2M/5.5M/11M Automatic detection Channel111ch IEEE802.11g Frequency : 2412MHz~2462MHz Transmission systemOFDM Transmission speed 6M/12M/18M/36M/48M/54M Automatic detection Channel111ch IEEE802.11a Frequency : 5180MHz~5320MHz 5745MHz~5825MHz Transmission systemOFDM Transmission speed 6M/12M/18M/36M/48M/54M Automatic detection Channel3664ch 149165ch Antenna interface Diversity connector PC containing: . 32-bit CardBus slot (or Desktop PC with PC Card-PCI adapter) . Mini PCI . 32 MB memory or greater . 300 MHz processor or higher When this module is installed in the host product, you must include a "Contain FCC ID : N6C-SX10WAG" in the label of the host product. It uses Driver and a utility of Atheros Communications. Atheros client utility It completes installation according to setup Wizard 2System Requirements (for the install) 3Setup

American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 July 12, 2006 RE: FCC ID: N6C-SX10WAG_ATCB003743 Attention: Yoshiko Mizuta I have a few comments on this Application. Please note that further comments may arise in response to answers provided to the questions below. 1. Please note that the LMA request states that the device is to fit only into hosts that contain the proper voltage regulation. Please also note that the manual simply states that the device fits into laptop PC or desk top PCs. Please note that it is a fallacy to assume that all hosts as mentioned in the manual have proper voltage regulation and thus the manufacturer of this module must have control over the host into which this device goes. How does the manufacturer maintain control over the installation of this device so as to ensure that the host has proper regulation? Please be more specific on how the manufacturer controls the installation of this device so as to meet voltage regulation requirements. 2. Please note that the manual simply states the device goes into a PC or laptop. Please note that many laptops have antennae which are within 20cm of the person. How does the manufacturer control which laptop this mobile only device goes into? Please be more specific on how the manufacturer controls the installation of this device so as to meet rf exposure requirements. 3. Please provide installation instructions for this device that include the notice to place “Contains FCC ID: N6C-SX10WAG”. 4. FYI – Just for general information, please explain why you broke up the 5.7GHz band. You have applied for a single frequency under 15.247 and the lower 5.7GHz frequencies under 15.407. Why was the device in the 5.7GHz range applied entirely to 15.247 rules? 5. Please note that modular approval, even limited modular approval, requires testing to be done with the specified antenna(s) that are to be used with the device. Please note that the antenna shown in the setup photos and in the external photos of the device do not appear to be the type that would be used in the laptop host as mentioned in the manual. Please test the device using such antenna(s) as will be used in the stated configuration. Please show compliance with the highest gain antenna of each type that will be used. Dennis Ward mailto:[email protected] The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information may result in application termination. Correspondence should be considered part of the permanent submission and may be viewed from the Internet after a Grant of Equipment Authorization is issued. Please do not respond to this correspondence using the email reply button. In order for your response to be processed expeditiously, you must submit your documents through the AmericanTCB.com website. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the sender.

July 14, 2006 Subject : FCC ID: N6C-SX10WAG Dear Mr. Ward, Regarding to your comments for FCC ID: N6C-SX10WAG on June 12, 2006, please find the following replies; 1. We have revised the LMA request letter and User Manual, laptop PC would not be host device of this module. Please refer to the User manual and LMA request letter attached. 2. We deleted the word “lap top PC” from User Manual. It was misprinted. Please refer to the User manual. 3. The note to place “Contains FCC ID:N6C-SX10WAG” and general instruction is already included in the User manual. Please refer to the User Manual. 4. Thank you for your concern. 5. Antenna intends to connect for this module is only one model for this application, if there will be other antennas in the future, it would be taken appropriate action for additional application. Sincerely yours, Yoshiko Mizuta (Ms.) UL Apex Co., Ltd.

Photo Mini PCI Wireless LAN Board Model:SX-10AWG FCC ID:N6C-SX10AWG silex technology, Inc. Comp side without shield Comp side with shield Photo Mini PCI Wireless LAN Board Model:SX-10AWG FCC ID:N6C-SX10AWG silex technology, Inc. Solder side Antenna photo

Wireless 11abg MiniPCI Adapter SX10WAG

Photo Mini PCI Wireless LAN Board Model:SX-10AWG FCC ID:N6C-SX10AWG silex technology, Inc. Comp side without shield Comp side with shield Photo Mini PCI Wireless LAN Board Model:SX-10AWG FCC ID:N6C-SX10AWG silex technology, Inc. Solder side Antenna photo

UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Applicant: silex technology, Inc. Type of Equipment: MiniPCI Wireless LAN Board Model No. : SX-10WAG (2.4GHz-Band, IEEE802.11b, g) FCC ID: N6C-SX10WAG RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “SX-10WAG (2.4GHz-Band, IEEE802.11b, g)“ as calculated from FCC OET Bulletin 65 Appendix A, Table (B) Limits for General Population / Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1.0mW/cm^2 uncontrolled exposure limit. The Friis formula used was: S = (P * G) / (4* * r 2 ) Where P = 44.16mW (Maximum peak output power) G = 1.41Numerical Antenna gain; equal to1.50 r =20.0 cm For: SX-10WAG (2.4GHz-Band, IEEE802.11b, g) S = 0.01241mW/cm 2 No. : 26GE0351-HO RF Exposure Statement

UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 A pplicant: silex technology, Inc. Type of Equipment : MiniPCI W ireless LAN Board Model No. : SX-10W AG (5GHz Band, IEEE802.11a) FCC ID: N6C-SX10WAG RF Exposure Calculations: The following information provides the minimum separation distance for the highest gain antenna provided with the “SX-10W AG (5GHz Band, IEEE802.11a)“ as calculated from FCC OET Bulletin 65 Appendix A, Table (B) Lim its for General Population / Uncontrolled Exposure. This calculation is based on the highest EIRP possible from the system , considering maximum power and antenna gain, and considering a 1.0mW /cm^2 uncontrolled exposure limit. The Friis formula used was: S = (P * G) / (4* π * r 2 ) Where P = 22.91 mW (Maximum peak output power) G = 1.62 Numerical Antenna gain; equal 2.10 dBi r =20.0 cm For: SX-10W AG (5GHz Band, IEEE802.11a) S = 0.00739 mW/cm 2 No. : 26GE0351-HO RF Exposure / SAR Statement

Test report No. : 26GE0351-HO-A-1 Page : 1 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) EMI TEST REPORT Test Report No. : 26GE0351-HO-A-1 Applicant : silex technology, Inc. Type of Equipment : MiniPCI Wireless LAN Board Model No. : SX-10WAG Test standard : FCC Part 15 Subpart C Section 15.207, Section 15.247: 2006 FCC ID : N6C-SX10WAG Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Apex Co., Ltd. 2. The results in this report apply only to the sample tested. 3. This equipment is in compliance with above regulation. We hereby certify that the data contain a true representation of the EMC profile. 4. The test results in this report are traceable to the national or international standards. Date of test: ____________________________ Tested by: ______________________________ ______________________________ Hiroka Umeyama EMC Services Norihisa Hashimoto EMC Services Approved by : ______________________________ Naoki Sakamoto Group Leader of EMC Services May 11 to July 8, 2006 NVLAP LAB CODE: 200572-0 This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://ulapex.jp/emc/nvlap.htm Test report No. : 26GE0351-HO-A-1 Page : 2 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) CONTENTS PAGE SECTION 1: Client information...................................................................................................3 SECTION 2: Equipment under test (E.U.T.)................................................................................3 SECTION 3: Test specification, procedures & results..................................................................4 SECTION 4: Operation of E.U.T. during testing..........................................................................7 SECTION 5: Conducted Emission................................................................................................9 SECTION 6: Spurious Emission.................................................................................................10 SECTION 7: Bandwidth.............................................................................................................11 SECTION 8: Maximum Peak Output Power..............................................................................11 SECTION 9: Peak Power Density...............................................................................................11 APPENDIX 1: Photographs of test setup....................................................................................12 Conducted Emission................................................................................................................12 Spurious Emission (Radiated).................................................................................................13 Worst Case Position (X-axis:Horizontal / Y-axis:Vertical)......................................................14 APPENDIX 2:Test instruments...................................................................................................15 APPENDIX 3: Data of EMI test...................................................................................................17 Conducted Emission................................................................................................................17 6dB Bandwidth.......................................................................................................................28 Maximum Peak Output Power................................................................................................33 Radiated Spurious Emission...................................................................................................40 Conducted Spurious Emission.................................................................................................58 Conducted emission Band Edge compliance............................................................................71 Power Density.........................................................................................................................73 99%Occupied Bandwidth.......................................................................................................78 Test report No. : 26GE0351-HO-A-1 Page : 3 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) SECTION 1: Client information Company Name : silex technology, Inc. Address : 15-15 Takaida higashiosaka Osaka Japan Telephone Number : +81-6-6784-3758 Facsimile Number : +81-6-6784-3750 Contact Person : Toshiro Kometani SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : MiniPCI Wireless LAN Board Model No. : SX-10WAG Serial : ES0002 / 0080923A9A29 Rating : DC3.3V, 0.54A Country of Manufacture : Japan Receipt Date of Sample : April 14, 2006 Condition of EUT : Engineering prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No modification by the test lab. 2.2 Product Description Model: SX-10WAG is the MiniPCI Wireless LAN Board. Equipment Type : Transceiver Clock frequency : 40MHz Method of Frequency Generation : Crystal Operating voltage (inner) : DC3.3V +/-10% IEEE802.11b IEEE802.11g IEEE802.11a Frequency of operation 2412-2462MHz 2412-2462MHz …

Text truncated - open the document above for the full version.

Test report No. : 26GE0351-HO-B Page : 1 of 81 Issued date : June 29, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) EMI TEST REPORT Test Report No. : 26GE0351-HO-B Applicant : silex technology, Inc. Type of Equipment : MiniPCI Wireless LAN Board Model No. : SX-10WAG Test standard : FCC Part 15 Subpart E Section 15.407: 2006 FCC ID : N6C-SX10WAG Test Result : Complied 1. This test report shall not be reproduced in full or partial, without the written approval of UL Apex Co., Ltd. 2. The results in this report apply only to the sample tested. 3. This equipment is in compliance with above regulation. We hereby certify that the data contain a true representation of the EMC profile. 4. The test results in this report are traceable to the national or international standards. Date of test: ______________________________ Tested by : ______________________________ ______________________________ Hiroka Umeyama EMC Services Norihisa Hashimoto EMC Services Approved by : ______________________________ Naoki Sakamoto Group Leader of EMC Services April 27 to June 20, 2006 NVLAP LAB CODE: 200572-0 This laboratory is accredited by the NVLAP LAB CODE 200572-0, U.S.A. The tests reported herein have been performed in accordance with its terms of accreditation. *As for the range of Accreditation in NVLAP, you may refer to the WEB address, http://ulapex.jp/emc/nvlap.htm Test report No. : 26GE0351-HO-B Page : 2 of 81 Issued date : June 29, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) CONTENTS PAGE SECTION 1: Client information ............................................................................................................ 3 SECTION 2: Equipment under test (E.U.T.)........................................................................................ 3 SECTION 3: Test specification, procedures & results......................................................................... 4 SECTION 4: Operation of E.U.T. during testing .................................................................................6 SECTION 5: Conducted Emission......................................................................................................... 8 SECTION 6: Spurious Emission , Band Edge Compliance ................................................................. 9 SECTION 7: 26dB Emission Bandwidth.............................................................................................10 SECTION 8: Peak Transmit Power..................................................................................................... 10 SECTION 9: Peak Power Spectral Density ........................................................................................10 SECTION 10: Peak Excursion Ratio................................................................................................... 10 APPENDIX 1: Photographs of test setup ............................................................................................ 11 Conducted Emission ................................................................................................................................. 11 Spurious Emission (Radiated)..................................................................................................................12 Worst Case Position (X-axis:Horizontal / Y-axis:Vertical) ....................................................................13 APPENDIX 3: Data of EMI test............................................................................................................ 16 Conducted Emission .................................................................................................................................16 26dB Emission Bandwidth .......................................................................................................................27 Peak Transmit Power................................................................................................................................31 Radiated Spurious Emission (below 1GHz)............................................................................................39 Radiated Spurious Emission (above 1GHz:Inside of the restricted band)...........................................47 Radiated Spurious Emission (above 1GHz:Outside of the restricted band)........................................55 Conducted Spurious Emission .................................................................................................................61 Conducted emission Band Edge compliance ..........................................................................................72 Peak Power Spectral Density ...................................................................................................................73 Peak Excursion Ratio................................................................................................................................76 99%Occupied Bandwidth.........................................................................................................................79 Test report No. : 26GE0351-HO-B Page : 3 of 81 Issued date : June 29, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) SECTION 1: Client information Company Name : silex technology, Inc. Address : 15-15 Takaida higashiosaka Osaka Japan Telephone Number : +81-6-6784-3758 Facsimile Number : +81-6-6784-3750 Contact Person : Toshiro Kometani SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : MiniPCI Wireless LAN Board Model No. : SX-10WAG Serial No. : ES0002 / 008923A9A00 Rating : DC3.3V…

Text truncated - open the document above for the full version.

Test report No. : 26GE0351-HO-A-1 Page : 15 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) APPENDIX 2:Test instruments Control No. Instrument Manufacturer Model No Test Item Calibration Date * Interval(month) MRENT-23 Spectrum Analyzer Advantest R3273 RE 2006/01/10 * 12 MPA-01 Pre Amplifier Agilent 8449B RE 2006/02/09 * 12 MBF-03 SHF Bandpass Filter M-City 13GHz BPF RE 2006/05/20 * 12 MCC-56 Microwave Cable Suhner SUCOFLEX104 RE 2006/04/15 * 12 MAT-21 Attenuator(20dB)(above1G Hz) HIROSE ELECTRIC CO.,LTD. AT-120 RE 2006/01/10 * 12 MLA-04 Logperiodic Antenna Rohde & Schwarz ESLP9145 RE 2006/03/29 * 12 MAEC-03 Anechoic Chamber TDK Semi Anechoic Chamber 3m RE 2006/03/03 * 12 MOS-13 Thermo-Hygrometer Custom CTH-180 RE 2006/01/19 * 24 MLA-04C Microwave Cable Suhner SUCOFLEX104 RE 2006/04/15 * 12 MAEC-01 Anechoic Chamber TDK Semi Anechoic Chamber 10m RE 2005/11/14 * 12 MOS-01 Digital Humidity Indicator N.T NT-1800 RE 2004/11/25 * 24 MTR-01 Test Receiver Rohde & Schwarz ESI40 RE 2005/11/10 * 12 MCC-01 Coaxial Cable 0.1- 3000MHz Suhner/storm/Agilent/TSJ - RE 2006/02/20 * 12 MBA-01 Biconical Antenna Schwarzbeck BBA9106 RE 2005/10/10 * 12 MLA-01 Logperiodic Antenna Schwarzbeck USLP9143 RE 2005/10/14 * 12 MAT-06 Attenuator(6dB) Weinschel Corp 2 RE 2005/12/16 * 12 MPA-04 Pre Amplifier Agilent 8447D RE 2006/05/27 * 12 MAEC-02 Anechoic Chamber TDK Semi Anechoic Chamber 3m CE /RE 2006/04/10 * 12 MOS-02 Digital Humidity Indicator N.T NT-1800 CE 2004/11/25 * 24 MCC-13 Coaxial Cable Fujikura/Agilent - CE 2006/02/23 * 12 MLS-07 LISN(AMN) Schwarzbeck NSLK8127 CE (EUT 2006/02/06 * 12 MAEC-04 Anechoic Chamber TDK Semi Anechoic Chamber 3m RE 2006/03/06 * 12 MRENT-31 Spectrum Analyzer Advantest R3273 RE/CE 2006/04/24 * 12 MOS-15 Thermo-Hygrometer Custom CTH-180 RE 2006/01/19 * 24 MHA-05 Horn Antenna Schwarzbeck BBHA9120D RE 2006/01/09 * 12 MHA-01 Horn Antenna EMCO 3160-09 RE 2006/01/09 * 12 MCC-57 Microwave Cable Suhner SUCOFLEX104 RE 2006/04/15 * 12 MPA-01 Pre Amplifier Agilent 8449B RE 2006/02/09 * 12 MHF-05 High Pass Filter Tokimec TF323DCA RE 2006/01/24 * 12 MSA-03 Spectrum Analyzer Agilent E4448A RE 2005/09/16 * 12 MCC-05 Microwave Cable 1G- 40GHz Storm 421-011 ( 90-1394-079 ) RE 2006/01/04 * 12 MCC-27 Microwave Cable 1G- 40GHz Suhner SUCOFLEX101 RE 2005/08/30 * 12 MHA-03 Horn Antenna EMCO 3160-10 RE 2006/01/09 * 12 MPA-03 Microwave System Power Amplifier Agilent 83050A RE 2006/05/16 * 12 MTR-02 Test Receiver Rohde & Schwarz ESCS30 CE 2006/02/02 * 12 MSTW-14 EMI measurement program TSJ TEPTO-DV RE/CE - Test report No. : 26GE0351-HO-A-1 Page : 16 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) Control No. Instrument Manufacturer Model No Test Item Calibration Date * Interval(month) MSA-03 Spectrum Analyzer Agilent E4448A AT/RE 2005/09/16 * 12 MCC-34 Microwave Cable Hirose Electric U.FL-2LP-066-A-(200) AT 2006/01/27 * 12 MCC-22 Microwave Cable 1G- 40GHz Storm 421-011 ( 90-011-080 ) AT 2006/05/12 * 12 MPM-01 Power Meter Agilent E4417A AT 2005/11/09 * 12 MPSE-03 Power sensor Agilent E9327A AT 2005/11/23 * 12 MAT-20 Attenuator(10dB)(above1 GHz) HIROSE ELECTRIC CO.,LTD. AT-110 AT 2006/01/10 * 12 MSA-07 Spectrum Analyzer Agilent E4408B AT 2006/03/24 * 12 MOS-04 Digital Humidity Indicator N.T NT-1800 AT 2004/11/25 * 24 MBTR10 Spectrum Analyzer Rohde & Schwarz FSP30 AT 2005/11/01 * 12 MAT-22 Attenuator(10dB)(above1 GHz) Orient Microwave BX10-0476-00 AT 2006/03/18 * 12 MOS-05 Thermo-Hygrometer Custom CTH-190 AT 2006/04/25 * 12 MSA-04 Spectrum Analyzer Agilent E4448A AT 2006/02/11 * 12 MTR-03 Test Receiver Rohde & Schwarz ESCI RE 2006/03/04 * 12 MCC-12 Coaxial Cable Fujikura/Agilent - RE 2006/02/23 * 12 MBA-02 Biconical Antenna Schwarzbeck BBA9106 RE 2005/10/10 * 12 MAT-07 Attenuator(6dB) Weinschel Corp 2 RE 2005/12/16 * 12 MOS-02 Digital Humidity Indicator N.T NT-1800 RE 2004/11/25 * 24 MPA-09 Pre Amplifier Agilent 8447D RE 2005/09/07 * 12 MPA-10 Pre Amplifier Agilent 8449B RE 2005/09/07 * 12 MHA-04 Horn Antenna EMCO 3160-10 RE 2006/01/09 * 12 MHA-02 Horn Antenna EMCO 3160-09 RE 2006/01/09 * 12 MCC-27 Microwave Cable 1G- 40GHz Suhner SUCOFLEX101 RE 2005/08/30 * 12 MCC-05 Microwave Cable 1G- 40GHz Storm 421-011 ( 90-1394-079 ) RE 2006/01/04 * 12 MBF-03 SHF Bandpass Filter M-City 13GHz BPF RE 2006/05/20 * 12 MLA-02 Logperiodic Antenna Schwarzbeck USLP9143 RE 2005/10/14 * 12 MCC-16 Microwave Cable 1G- 26.5GHz Suhner SUCOFLEX 104 RE 2006/02/02 * 12 MCC-47 Microwave Cable 1G- 26.5GHz Suhner SUCOFLEX104 RE 2005/08/30 * 12 All equipment is calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. Test Item: CE: Conducted emission RE: Radiated emission AT: Antenna Terminal Test report No. : 26GE0351-HO-A-1 Page : 17 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) APPENDIX 3: Data of EMI test Conducted Emission Test report No. : 26GE0351-HO-A-1 Page : 18 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) Conducted Emission Test report No. : 26GE0351-HO-A-1 Page : 19 of 80 Issued date : June 8, 2006 Revised date : July 8, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060…

Text truncated - open the document above for the full version.

Test report No. : 26GE0351-HO-B Page : 14 of 81 Issued date : June 29, 2006 FCC ID : N6C-SX10WAG UL Apex Co., Ltd. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 MF060b(14.06.06) APPENDIX 2:Test instruments Control No. Instrument Manufacturer Model No Test Item Calibration Date * Interval(month) MRENT-23 Spectrum Analyzer Advantest R3273 RE 2006/01/10 * 12 MPA-01 Pre Amplifier Agilent 8449B RE 2006/02/09 * 12 MBF-03 SHF Bandpass Filter M-City 13GHz BPF RE 2006/05/20 * 12 MCC-56 Microwave Cable Suhner SUCOFLEX104 RE 2006/04/15 * 12 MAT-21 Attenuator(20dB)(abov e1GHz) HIROSE ELECTRIC CO.,LTD. AT-120 RE 2006/01/10 * 12 MLA-04 Logperiodic Antenna Rohde & Schwarz ESLP9145 RE 2006/03/29 * 12 MAEC-03 Anechoic Chamber TDK Semi Anechoic Chamber 3m RE 2006/03/03 * 12 MOS-13 Thermo-Hygrometer Custom CTH-180 RE 2006/01/19 * 24 MLA-04C Microwave Cable Suhner SUCOFLEX104 RE 2006/04/15 * 12 MAEC-01 Anechoic Chamber TDK Semi Anechoic Chamber 10m RE 2005/11/14 * 12 MOS-01 Digital Humidity Indicator N.T NT-1800 RE 2004/11/25 * 24 MTR-01 Test Receiver Rohde & Schwarz ESI40 RE 2005/11/10 * 12 MCC-01 Coaxial Cable 0.1- 3000MHz Suhner/storm/Agilent/T SJ - RE 2006/02/20 * 12 MBA-01 Biconical Antenna Schwarzbeck BBA9106 RE 2005/10/10 * 12 MLA-01 Logperiodic Antenna Schwarzbeck USLP9143 RE 2005/10/14 * 12 MAT-06 Attenuator(6dB) Weinschel Corp 2 RE 2005/12/16 * 12 MPA-04 Pre Amplifier Agilent 8447D RE 2006/05/27 * 12 MAEC-02 Anechoic Chamber TDK Semi Anechoic Chamber 3m CE 2006/04/10 * 12 MOS-02 Digital Humidity Indicator N.T NT-1800 CE 2004/11/25 * 24 MCC-13 Coaxial Cable Fujikura/Agilent - CE 2006/02/23 * 12 MLS-07 LISN(AMN) Schwarzbeck NSLK8127 CE (EUT ） 2006/02/06 * 12 MAEC-04 Anechoic Chamber TDK Semi Anechoic Chamber 3m RE 2006/03/06 * 12 MRENT-31 Spectrum Analyzer Advantest R3273 RE/C…

Text truncated - open the document above for the full version.