N6C-SXDS3000WNSX-DS-3000WN

Specifications This page explains the specification of SX-DS-3000WN. Network interface 10BASE-T / 100BASE-TX / 1000BASE-T (Auto-sensing) Wireless Network Interface IEEE802.11b Bandwidth 2.4GHz Transmission system DS-SS Transmission speed 1M / 2M / 5.5M / 11M (Auto-sensing) Channel 1-11ch IEEE802.11g Bandwidth 2.4GHz Transmission system OFDM Transmission speed 6M / 9M / 12M / 18M / 24M / 36M / 48M / 54M (Auto-sensing) Channel 1-11ch IEEE802.11n Bandwidth 2.4GHz Transmission system MIMO-OFDM Channel 1-11ch AntennaNon-directional antenna Device interface USB2.0 Hi-Speed (A Type) x 2 ports (Up to 1.0A of USB Bus power is available for the 2 USB ports combined) Supported protocols TCP/IP Supported OS Windows XP (32-Bit Edition) Windows Vista (32-Bit Edition/ 64-Bit Edition) Windows 7 (32-Bit Edition / 64-Bit Edition) Mac OS X 10.3.x - 10.5.x : PPC Version Mac OS X 10.4.4 - 10.7.x : Intel Version Number of connectable device (Number of USB devices can be connected at a 15 (* When USB Hub is used. Only one printer can be connected using a print server feature.) 1/5ページ 2013/11/11 time) Dimensions W:71.54mm × D:126.4mm × H:24.2mm Operating environment Temperature : 0°C to +40°C / +41°F to +104°F Humidity : 20% to 90%RH(Non-condensing) Storage environment Temperature : -10°C to +50°C / +14°F to +122°F Humidity : 20% to 90%RH(Non-condensing) EMCVCCI Class B / FCC Class B / ICES Class B Power supplyOperating voltage: 5V
Silex Technology shall not be liable for any loss or damage of data in data storage devices resulting from the use of SX-DS-3000WN. Silex Technology shall also not be liable for any leak, manipulation, loss, or corruption of data in data storage devices connected to SX-DS-3000WN as a result of improper use.
Some USB Hubs may not be compatible with SX-DS-3000WN.
When using isochronous devices such as Web cameras or USB speakers, etc, please connect them directly to SX-DS-3000WN.
If isochronous devices such as Web cameras or USB speakers, etc. are used wirelessly with SX- DS-3000WN, frame dropping or sound skipping may occur.
If isochronous devices such as Web cameras or USB speakers, etc. are used on a 100BASE- TX/10BASE-T network, frame dropping or sound skipping may occur.
Depending on the USB printing device specification, the Printer auto connection function may not be available.
When a print server feature is used, it is impossible to get printer status using the status monitor software that came with the printer or MFP. Also, if the printer supports bi-directional printing only, a print server feature cannot be used.
When using a print server feature, only one printer can be used at a time. To connect 2 or more printers, SX Virtual Link must be used.
Some USB devices may not be supported depending on the driver specification. For the latest compatibility information, please visit our website ( http://www.silexamerica.com/).
For the latest information on the supported operating system, please visit our website ( http://www.silexamerica.com/).
If an overcurrent is detected on a USB port, power supply to the USB port is automatically cut off via an overcurrent protection feature. If you are using USB devices that run on USB Bus power, it is recommended to avoid using two or more devices at once, so that the total power used does not exceed the maximum power capability of SX-DS-3000WN.
About USB Hub connection SX-DS-3000WN does not support the USB devices connected across two or more USB Hubs. (The cascade connection is not supported.) 2/5ページ 2013/11/11 FCC / IC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the userfs authority to operate the equipment. Federal Communication Interference Statement (United States only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, it
About the number of connection If SX-DS-3000WN is used with a MFP as shown below, total 3 connections will be occupied (1 connection for each printer, scanner and storage features). 3/5ページ 2013/11/11 may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This radio module and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. Canadian Department of Communications Industry Canada Notice (Canada only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC Rules, Part 15 / Industry Canadian This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference, including interference that may cause …

Text truncated - open the document above for the full version.

External Photo [Model: SX-DS-3000WN] External Photo [Model: SX-DS-3000WN] External Photo [Model: SX-DS-3000WN]

1 F E D 23 C B A 1 234 CHANGE OF CONTENTSREVIS FIRST EDITION DATEDESIGN × × × × × 1/1 SHEET MATERIAL APPROVEDCHECKED DWG No. TITLE FINISH SCALE F E D C B A A4 SIZE Confiden tial © sile x t echnolo gy, Inc . Compliance of RoHS (RoHS対応の事) T.MinobeSep. 30, 2013 EMI Label LN100211XX PET Film 50 μm White Printing Color: Black 1 : 1 T.KimotoK.Okazaki 39.5 ±0.2 44.4 ±0.2 39.5 ± 0.2 44.4 ± 0.2 5-R1 ModelSX-DS-3000WN FCC ID N6C-SXDS3000WN IC：4908A-SXDS3000WN Made in Japan E/A : 008092XXXXXX S/N : YYYYYYYYY プリンタ印字部 フォント：MSPゴシック 7pt E/A：指定された Ethernet Address を Barcode（Code 128）化して印刷する事。 E/A : の文字はエンコードしない。 S/N：Ethernet Addressの下6桁を10進数で表示したものを印刷する事。 9桁で示し、頭の1桁目は0とすること。 フォントがない場合は可能な限り、図面に合わせること。 プリンタ印字部は設備等により、図面のイメージと異なることがあります。

1 F E D 2 34 C B A 1 234 567 F E D 567 C B 8 A Confidential F CHANGE OF CONTENTSREVIS FIRST EDITION DATEDESIGN × × × × × 1/1 SHEET MATERIAL APPROVEDCHECKED DWG No. TITLE FINISH SCALE1:1 A3 SIZE © silex technology, Inc. (注:寸法は突起物を含まない。) Outside Drawing KG100570XX T.MinobeOct.09,13 T.KimotoK.Okazaki 71.5 ±2 126.4 ±2 24.2 ±2 ModelSX-DS-3000WN FCC ID N6C-SXDS3000WN IC：4908A-SXDS3000WN Made in Japan E/A : 008092XXXXXX S/N : YYYYYYYYY

Internal Photo [Model: SX-DS-3000WN] Internal Photo [Model: SX-DS-3000WN] Internal Photo [Model: SX-DS-3000WN]

UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Applicant: silex technology, Inc. Type of Equipment : SX-DS-3000WN Model No. : SX-DS-3000WN FCC ID: N6C-SXDS3000WN silex technology, Inc. declares that Model : SX-DS-3000WN ⇒ complies with FCC radiation exposure requirement specified in the FCC Rules 2.1091 (for mobile). RF Exposure Calculations: ← The following information provides the minimum separation distance for the highest gain antenna provided with the “SX-DS-3000WN“ as calculate d from (B) Limits for General Population / Uncontrolled Exposure of TABLE 1- LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) of §1.1310 Radiofrequency radiation exposure limits. This calculation is based on the highest EIRP possible from the system, considering maximum power and antenna gain, and considering a 1.0mW/cm^2 uncontrolled exposure limit. The Friis formula used was: S = (P * G) / (4* π * r 2 ) Where P = 45.39 mW (Average output power) G = 1.58 Numerical Antenna gain; equal to2.00dBi r =20.0 cm For: SX-DS-3000WNS =0.01431 mW/cm 2 No. : 10003588H RF Exposure / MPE Calculation

Test report No. : 10003588H-A Page : 2of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 REVISION HISTORY Original Test Report No.: 10003588H-A Revision Test report No. Date Page revised Contents - (Original) 10003588H-A October 17, 2013 - - Test report No. : 10003588H-A Page : 3of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 CONTENTS PAGE SECTION 1: Customer information ......................................................................................................... 4 SECTION 2: Equipment under test (E.U.T.) ........................................................................................... 4 SECTION 3: Test specification, procedures & results ............................................................................ 5 SECTION 4: Operation of E.U.T. during testing .................................................................................... 8 SECTION 5: Conducted Emission .......................................................................................................... 11 SECTION 6: Radiated Spurious Emission ............................................................................................ 12 APPENDIX 1: Data of EMI test .............................................................................................................. 13 Conducted Emission ......................................................................................................................... 13 Radiated Spurious Emission ............................................................................................................. 14 APPENDIX 2: Test instruments ............................................................................................................. 24 APPENDIX 3: Photographs of test setup ............................................................................................... 25 Conducted Emission ......................................................................................................................... 25 Radiated Spurious Emission ............................................................................................................. 26 Worst Case Position .......................................................................................................................... 27 Test report No. : 10003588H-A Page : 4of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 1: Customer information Company Name : silex technology, Inc. Address : 2-3-1 Hikaridai, Seika-cho, Kyoto 619-0237, Japan Telephone Number : +81-774-98-3878 Facsimile Number : +81-774-98-3758 Contact Person : Toshiro Kometani SECTION 2: Equipment under test (E.U.T.) 2.1 Identification of E.U.T. Type of Equipment : SX-DS-3000WN Model No. : SX-DS-3000WN Serial No. : Refer to Section 4, Clause 4.2 Rating : DC 4.75 to 5.355V Receipt Date of Sample : February 20, 2013 Country of Mass-production : Japan Condition of EUT : Production prototype (Not for Sale: This sample is equivalent to mass-produced items.) Modification of EUT : No Modification by the test lab 2.2 Product Description Model No: SX-DS-3000WN (referred to as the EUT in this report) is the SX-DS-3000WN. General Specification Clock frequency(ies) in the system : 40MHz Radio Specification Radio Type : Transceiver Method of Frequency Generation : Synthesizer Power Supply (inner) : DC3.3V Specification of Wireless LAN (IEEE802.11b/g/n-20/n-40) Type of radio IEEE802.11b IEEE802.11g IEEE802.11n (20 M band) IEEE802.11n (40 M band) Frequency of operation 2412-2462MHz 2412-2462MHz 2412 - 2462MHz 2422 - 2452MHz Type of modulation DSSS (CCK, DQPSK, DBPSK) OFDM-CCK (64QAM, 16QAM, QPSK, BPSK) OFDM (64QAM, 16QAM, QPSK, BPSK) Channel spacing 5MHz Antenna type PIFA antenna Antenna Gain: G ANT 2.0dBi (including cableloss) Antenna Connector type U.FL connector *The EUT is the modified version of model: SX-DS-3000EWB (FCC ID: N6C-DS3000EW, IC Number: 4908A- SXDS3000WN). Contents of the change from model: SX-DS-3000EWB as below. 1) Module was set in the case. The radio specification is identical to the original. Therefore only Conducted Emission and Radiated Spurious Emission tests were performed in this report. Antenna terminal conducted tests were performed in previous test report. Please refer to UL Japan test report No. 32LE0279-HO-01-A-R1. Test report No. : 10003588H-A Page : 5of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 SECTION 3: Test specification, procedures & results 3.1 Test Specification Test Specification : FCC Part 15 Subpart C: 2013, final revised on June 11, 2013 and effective July 11, 2013 Title : FCC 47CFR Part15 Radio Frequency Device Subpart C Intentional Radiators Section 15.207 Conducted limits Section 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz * The revision on June 11, 2013 does not affect the test specification applied to the EUT. 3.2 Procedures and results Item Test Procedure Specification Worst margin Results Remarks Conducted Emission FCC: ANSI C63.4:2003 7. AC powerline Conducted Emission measurements FCC: Section 15.207 QP 7.0dB, 0.15918MHz, L AV 15.5dB, 0.43730MHz, N Complied - IC: RSS-Gen 7.2.4 IC: RSS-Gen 7.2.4 Spurious Emission Restricted Band Edges FCC: "Guidance for Performing Compliance Measurements on Digital Transmission Systems (DTS) Operating Under §15.247(issued on April 9, 2013)" FCC: Section15.247(d) 0.2dB 499.998MHz,…

Text truncated - open the document above for the full version.

Test report No. : 10003588H-A Page : 25of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Conducted Emission Photo 1 Photo 2 Test report No. : 10003588H-A Page : 26of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Radiated Spurious Emission Photo 1 Photo 2 Test report No. : 10003588H-A Page : 27of 27 Issued date : October 17, 2013 FCC ID : N6C-SXDS3000WN UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8999 Facsimile : +81 596 24 8124 Worst Case Position (11b Horizontal: Z-axis/ Vertical:X-axis) (11n20/11n40 Horizontal: X-axis/ Vertical:Z-axis) X-axis Y-axis Z-axis End of Report

Test report No. : 32LE0279-HO-01-A-R1 Page : 68 of 70 Issued date : September 4, 2012 Revised date : September 10, 2012 FCC ID : N6C-DS3000EWB UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 APPENDIX 3: Photographs of test setup Conducted Emission Photo 1 Photo 2 Test report No. : 32LE0279-HO-01-A-R1 Page : 69 of 70 Issued date : September 4, 2012 Revised date : September 10, 2012 FCC ID : N6C-DS3000EWB UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Radiated Spurious Emission Photo 1 Photo 2 Test report No. : 32LE0279-HO-01-A-R1 Page : 70 of 70 Issued date : September 4, 2012 Revised date : September 10, 2012 FCC ID : N6C-DS3000EWB UL Japan, Inc. Head Office EMC Lab. 4383-326 Asama-cho, Ise-shi, Mie-ken 516-0021 JAPAN Telephone : +81 596 24 8116 Facsimile : +81 596 24 8124 Worst Case Position (Ant Horizontal: X-axis/ Vertical:Z-axis) (Module Horizontal: X-axis/ Vertical:X-axis) X-axis X-axis Y-axis Y-axis Z-axis Z-axis End of Report