NBG009014BField Disturbance Sensor

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 5 Functional Description / User Manual Date: 2011-11-04 No.: Hella KGaA Hueck & Co. 59552 Lippstadt User Manual Page 1 Author: Subject: LCA (Lane Change Assist), Gen. 1.7 SWA (Spurwechselassistent), Gen. 1.7 Org. unit/Gr.: Ref.: Enclosures: signed by: checked by: This document is confidential. Its contents are not to be exploited, passed on or disclosed to third p arties without our express permission. All rights a re reserved. Hella 3399EN (2000 -05) LCA (Lane Change Assist) Gen. 1.7 SWA (Spurwechselassistent) Gen. 1.7 Model Names: SWA SG1 / SWA SG2 (Audi / VW / Porsche / Hyundai) MODULE-L/C/A RH / MODULE-L/C/A LH (Mazda) System Function and Purpose The LCA system is an advanced driver assistant system, to warn the driver of the subject vehicle against potential collisions with vehicles to the side and/or to the rear of the subject vehicle, and moving in the same direction as the subject vehicle during lane change manoeuvres. The system therefore detects vehicles to the rear and sides of the subject vehicle. When the subject vehicle driver indicates the desire to make a lane change, the system will evaluate the situation and warn the driver if a lane change is not recommended. LCA is not meant to encourage aggressive driving. The absence of a warning will not guarantee that the driver can safely make a lane change manoeuvre. The system will not take any automatic action to prevent possible collisions. Responsibility for the safe operation of the vehicle remains with the driver. Date: 2011-11-04 No.: Hella KGaA Hueck & Co. 59552 Lippstadt Subject: LCA (Lane Change Assist), Gen. 1.7 SWA (Spurwechselassistent), Gen. 1.7 Page 2 of 5 Signed by: Checked by: Hella 3399DE (2000 -05) Vertraulich. Weitergabe sowie Verwertung und Mittei lung des Inhalts ist nur mit unserer ausdrücklichen Genehmigung gestattet. Alle Rechte vorbehalten. LCA System Architecture The LCA system consists of two radar sensor units which are mounted behind the rear bumper in the left and right rear corners of a car so that the rear and the sides of the car can be observed. One of the units is the main control unit "master = SWA SG1" and the other is the "slave = SWA SG2". For Mazda the units are the main control unit "master = MODULE-L/C/A RH " and the other is the "slave = MODULE-L/C/A LH ". The two units interchange data between each other via the sensor CAN-bus. The master interchanges data with other electronic control units of the vehicle via the vehicle CAN-bus. Both units incorporate a DSP-board and a Radar Frequency Unit (Radio Front End) to perform the radar signal processing. Only the DSP-board of the master incorporates a microprocessor which handles the communication to the vehicle CAN-bus. An on-off-tipper to activate and de-activate the system is connected to the DSP-board of the master unit. In the car a respective status lamp which indicates whether the system is activated or de-activated is connected to the DSP-board of the master unit. Warning lamps for the left and the right side are connected to the DSP-board of the slave unit. Date: 2011-11-04 No.: Hella KGaA Hueck & Co. 59552 Lippstadt Subject: LCA (Lane Change Assist), Gen. 1.7 SWA (Spurwechselassistent), Gen. 1.7 Page 4 of 5 Signed by: Checked by: Hella 3399DE (2000 -05) Vertraulich. Weitergabe sowie Verwertung und Mittei lung des Inhalts ist nur mit unserer ausdrücklichen Genehmigung gestattet. Alle Rechte vorbehalten. The RF units each consist of • one 24-GHz-VCO, • one transmit antenna, • two receivers (each consisting of antenna, LNA, mixer, BPF and base-band amplifier) and • one 2.4-GHz-PLL oscillator with a 10x-frequency multiplier. The transmit signal is generated by the 24-GHz-VCO. The 24-GHz-VCO is frequency modulated by a DAC on the DSP-board. The DSP-board is able to switch off the transmitter. The tenth harmonic of 2.4-GHz-PLL is generated and used to align the modulation of the 24-GHz-VCO and to keep it within the frequency band limits. The transmit antenna pattern is a microstrip patch antenna array with 5x8 elements. It is designed to illuminate the rear and the side of the vehicle and is thus a medium gain antenna. The three receivers down-convert the receive signals directly to zero-IF by using the 24-GHz-VCO signal. The base-band receiver signals are digitized by ADCs on the DSP-board. The receiver antennas are microstrip patch antennas with a lower gain than the transmit antenna (1x8 or 2x8 elements). Technical Data of LCA Supply Voltage +9 V ... +15 V Supply Current appr. 0.5 A (of master and slave without lamps connected) Frequency Band 1 24075 MHz ... 24175 MHz Frequency Band 2 24150 MHz ... 24250 MHz Modulation FMCW Modulation Bandwidth < 100 MHz EIRP < +20 dBmW Antenna Type microstrip patch array Antenna gain 16 dBi Operating Temperature Range -40°C ...+70°C Storage Temperature Range -40°C ...+90°C Supply Voltage +9 V ... +15 V Date: 2011-11-04 No.: Hella KGaA Hueck & Co. 59552 Lippstadt Subject: LCA (Lane Change Assist), Gen. 1.7 SWA (Spurwechselassistent), Gen. 1.7 Page 5 of 5 Signed by: Checked by: Hella 3399DE (2000 -05) Vertraulich. Weitergabe sowie Verwertung und Mittei lung des Inhalts ist nur mit unserer ausdrücklichen Genehmigung gestattet. Alle Rechte vorbehalten. Abbreviations ADC analog-to-digital converter BPF band pass filter CAN controller area network CP communication processor DAC digital-to-analog converter DSP digital signal processor EIRP equivalent isotropically radiated power FMCW frequency modulated continuous wave IF intermediate frequency HC-2 Lane Change Decision Aid System LNA low noise amplifier PLL phase-locked-loop RF radio frequency Rx Receive SWA Spurwechselassistent - german term for LCDAS Tx Transmit VCO voltage controlled oscillator XTAL crystal oscillator

RF_160, Issue 02 Declaration of Authorization We Name: Hella KGaA Hueck & Co. Address: Rixbecker Str. 75 City: 59552 Lippstadt Country: Germany Declare that: Name Representative of agent: Mr Andreas Morsbach (1) Mrs Anja Hittig-Rademacher (1) Agent Company name: m. dudde hochfrequenz-technik Address: Rottland 5 a City: 51429 Bergisch Gladbach Country Germany is authorized to apply for Certification at FCC of the following product(s): Product description: LCA (Lane Change Assist) Gen. 1.7 SWA (Spurwechselassistent) Gen. 1.7 Model Names: Audi, VW, Porsche, Hyundai: SWA SG1 SWA SG2 Mazda: MODULE-L/C/A RH MODULE-L/C/A LH Type designation: see model names Trademark: Hella on our behalf. Date: 11 / 24 / 2011 City: Lippstadt Name: Heinz-Theo Holle (2) Function: Homologation Manager Signature: Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

FCC, Request for non-disclosure Date: 24-11-11 RF_501, Issue 3 Page 1 of 1 Hella KGaA Hueck & Co. Rixbecker Str.75 59552 Lippstadt Germany To: Telefication B.V. Attn: Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject:Request for confidentiality FCC ID:NBG009014B Reference number: LCA 1.7 Dear FCC TCB, Persuant to 47 CFR Section 0.459(a) & (b), Hella KGaA Hueck & Co. hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: NBG009014B Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Above materials contain secrets, proprietary and technical information, which would customarily be quarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. Hella KGaA Hueck & Co. understands that pursuant to 47 CFR section 0.457(d)(1)(ii) disclosure of the applicant and all accompanying documentation will not be made before the date of the grant. 11 / 24 / 2011 Lippstadt Heinz-Theo Holle Homologation Manager

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 1 External Photographs State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 LCA 1.7 SWA SG1 (Master) State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 LCA 1.7 SWA SG2 (Slave) State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 4 Label Sample State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Label sample State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Label location RSS-310 RSS-310

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 2 Internal Photographs State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 LCA 1.7 SWA SG1 (Master) State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 LCA 1.7 SWA SG2 (Slave) State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920

Test report no. 12007400 Page 1 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG00914B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 Test Report acc. to FCC Title 47 CFR Part 15 relating to Hella KGaA Hueck & Co. SWA 1.7 (SWA/LCA/Module-L/C/A) Title 47 - Telecommunication Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators Measurement Procedure: ANSI C63.4-2009 Test report no. 12007400 Page 2 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG00914B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 Manufacturer’s details Manufacturer Hella KGaA Hueck & Co. Manufacturer’s grantee code NBG Manufacturer’s address Hella KGaA Hueck & Co. Rixbecker Strasse 75 D-59552 Lippstadt Germany Phone: +49 (0) 2941 38 8392 Fax: +49 (0) 2941 38 479392 Email: [email protected] Relevant standard used 47 CFR Part 15C - Intentional Radiators ANSI C63.4-2009 Test Report prepared by Technical engineer Ralf Trepper m. dudde hochfrequenz-technik (laboratory) Rottland 5a 51429 Bergisch Gladbach Germany Phone: +49 2207 96890 Fax: +49 2207 968920 Email: [email protected] Equipment Under Test (EUT) Equipment category Transceiver (Field disturbance sensor) Trade name Hella Type designation SWA 1.7 (SWA/LCA/Module-L/C/A) Serial no. 3CX2 9004 (Slave) / 3CW2 9001 (Master) Variants SWA 1.7 SG1 (Master) SWA 1.7 SG2 (Slave) Test report no. 12007400 Page 3 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG00914B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 1. Test results Clause Requirements headline Test result Report page number 8.1 Antenna Requirement Pass Fail N.t.* 9 8.2 Conducted limits Pass Fail N.t.* 10 to 12 8.3 Radiated emission limits Pass Fail N.t.* 13 to 20 8.4 Bandwidth (20 dB) Pass Fail N.t.* 21 to 22 * Not tested The equipment meets the requirements Yes No Signature: ............................. Signature: ............................. (Technician) (Manager) Test report no. 12007400 Page 4 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG00914B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 Table of contents 1. Test results ........................................................................................................................................................ 3 2. Introduction ...................................................................................................................................................... 5 3. Testing laboratory ............................................................................................................................................ 5 4. Applicant .......................................................................................................................................................... 6 5. Product and product documentation ................................................................................................................ 6 6. Conclusions, observations and comments ....................................................................................................... 7 7. Operational description ..................................................................................................................................... 8 8. Compliance assessment .................................................................................................................................... 9 8.1 Antenna requirement ...................................................................................................................................... 9 8.1.2 Result .................................................................................................................................................... 9 8.2 Conducted limits ............................................................................................................................................ 10 8.2.1 Test equipment ..................................................................................................................................... 10 8.2.2 Test procedures ..................................................................................................................................... 11 8.2.3 Result .................................................................................................................................................... 11 8.3 Radiated emission limits ................................................................................................................................ 13 8.3.1 Test equipment ..................................................................................................................................... 14 8.3.2 Test procedure ...................................................................................................................................... 15 8.3.3 Calculation of the field strength ........................................................................................................... 16 8.3.4 Result .................................................................................................................................................... 17 8.4 Bandwidth (20 dB) ......................................................................................................................................... 21 8.4.1 Test equipment ..................................................................................................................................... 21 8.4.2 Test procedure ...............…

Text truncated - open the document above for the full version.

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 3 Occupied Bandwidth Plot State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 20 dB bandwidth Master Slave State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 99% bandwidth Master Slave

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 10 Antenna Descriptions Hella LCA 1.7 SWA SG1 / LCA 1.7 SWA SG2 Antenna short description The radar sensors LCA and LCA SG1 1.7 1.7 1.7 SWA SWA 1.7 SG2 from the Hella KGaA Hueck & Co. contain in each case one transmitting antenna (Tx) and three receiving antennas (Rx1, 2.3) in the same housing: Each antenna is realized from an array of individual planar patches. The polarization of each antenna is vertical. The transmitting antenna in the azimuth direction has the maximum of the gain at about phi = 12 ° look angle (see diagram below). In elevation direction, the maximum is at around theta = 0 °. The maximum gain of the transmitting antenna is about 15.0 dBi. SWA 1.7 TX Radiation Pattern -50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 -90-80-70-60-50-40-30-20-100102030405060708090 Angle in [deg] norm Gain in [dB] Tx AzimutTx Elevation Phi=0°

Test report no. 12007400 Page 1 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG009014B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 Test Report acc. to FCC Title 47 CFR Part 15 relating to Hella KGaA Hueck & Co. SWA 1.7 (SWA/LCA/Module-L/C/A) Title 47 - Telecommunication Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators Measurement Procedure: ANSI C63.4-2009 Test report no. 12007400 Page 2 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG009014B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 Manufacturer’s details Manufacturer Hella KGaA Hueck & Co. Manufacturer’s grantee code NBG Manufacturer’s address Hella KGaA Hueck & Co. Rixbecker Strasse 75 D-59552 Lippstadt Germany Phone: +49 (0) 2941 38 8392 Fax: +49 (0) 2941 38 479392 Email: [email protected] Relevant standard used 47 CFR Part 15C - Intentional Radiators ANSI C63.4-2009 Test Report prepared by Technical engineer Ralf Trepper m. dudde hochfrequenz-technik (laboratory) Rottland 5a 51429 Bergisch Gladbach Germany Phone: +49 2207 96890 Fax: +49 2207 968920 Email: [email protected] Equipment Under Test (EUT) Equipment category Transceiver (Field disturbance sensor) Trade name Hella Type designation SWA 1.7 (SWA/LCA/Module-L/C/A) Serial no. 3CX2 9004 (Slave) / 3CW2 9001 (Master) Variants SWA 1.7 SG1 (Master) SWA 1.7 SG2 (Slave) Test report no. 12007400 Page 3 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG009014B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 1. Test results Clause Requirements headline Test result Report page number 8.1 Antenna Requirement Pass Fail N.t.* 9 8.2 Conducted limits Pass Fail N.t.* 10 to 12 8.3 Radiated emission limits Pass Fail N.t.* 13 to 20 8.4 Bandwidth (20 dB) Pass Fail N.t.* 21 to 22 * Not tested The equipment meets the requirements Yes No Signature: ............................. Signature: ............................. (Technician) (Manager) Test report no. 12007400 Page 4 of 32 EUT: SWA 1.7 (SWA/LCA/Module-L/C/A) FCC ID: NBG009014B Date of issue: 2011-12-12 Date: 2011-05-13 Vers. no. 1.11 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel: +49 2207-96890 Fax +49 2207-968920 Table of contents 1. Test results ........................................................................................................................................................ 3 2. Introduction ...................................................................................................................................................... 5 3. Testing laboratory ............................................................................................................................................ 5 4. Applicant .......................................................................................................................................................... 6 5. Product and product documentation ................................................................................................................ 6 6. Conclusions, observations and comments ....................................................................................................... 7 7. Operational description ..................................................................................................................................... 8 8. Compliance assessment .................................................................................................................................... 9 8.1 Antenna requirement ...................................................................................................................................... 9 8.1.2 Result .................................................................................................................................................... 9 8.2 Conducted limits ............................................................................................................................................ 10 8.2.1 Test equipment ..................................................................................................................................... 10 8.2.2 Test procedures ..................................................................................................................................... 11 8.2.3 Result .................................................................................................................................................... 11 8.3 Radiated emission limits ................................................................................................................................ 13 8.3.1 Test equipment ..................................................................................................................................... 14 8.3.2 Test procedure ...................................................................................................................................... 15 8.3.3 Calculation of the field strength ........................................................................................................... 16 8.3.4 Result .................................................................................................................................................... 17 8.4 Bandwidth (20 dB) ......................................................................................................................................... 21 8.4.1 Test equipment ..................................................................................................................................... 21 8.4.2 Test procedure ...........…

Text truncated - open the document above for the full version.

State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 Annex no. 6 Test Setup Photographs State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 30 MHz – 1 GHz State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 1 GHz – 18 GHz State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 18 GHz -40 GHz State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 18 GHz -40 GHz State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 40 GHz -60 GHz State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 60 GHz -90 GHz