NBGFS1901SPassive Entry / Passive Start radio identification device

HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 1 of 10 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 User Manual FS1901S Passive Entry / Passive Start radio identification devices HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 2 of 10 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 Content 1 FS1901S family overview 3 2 Safety warnings and precautions 3 3 Communication technologies 4 4 FS1901S Technical data summary 5 5 FS1901S pictures 6 6 FS1901S Modes of operation 10 6.1 Remote keyless entry (RKE) 10 6.2 Keyless Entry / Keyless Go (PKE) 10 6.3 Transponder mode 10 7 Statement: 10 HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 3 of 10 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 1 FS1901S family overview This document is to describe the FS19S family of Radio Identification Devices (RID) intended for use in automotive Passive Entry / Passive Start systems. All family members use the same PCB layout and basic type of housing. There are different variants regarding number of buttons, finish of the housing, labelling of the housing etc. Images of the devices are given in chapter 5. 2 Safety warnings and precautions Do not ingest battery, Chemical Burn Hazard This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. Should a child swallow a battery, consult a physician immediately. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. CAUTION Risk of explosion if the battery is replaced by an incorrect type Keep batteries away from direct sunlight, high temperature, and high humidity Please be sure to observe the following warnings. As batteries contains flammable substances such as lithium or other organic solvents, they may cause heating, rupture or ignition Warning 1. Do not charge, short, disassemble, deform or heat batteries. Do not throw batteries into fire. 2. When discarding batteries, insulate the positive and negative terminals of batteries with insulating tape, etc. When disposed of improperly, lithium batteries may short, causing them to become hot, burst or ignite. Caution 1. Be sure to connect the positive and negative electrodes correctly. 2. Avoid mixed use of batteries, i.e. new, used or different types. 3. Avoid direct soldering to batteries. HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 4 of 10 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 3 Communication technologies There are two basic communication technologies implemented in the FS19S devices: • Low Frequency (LF) communication, used for waking up the devices and for communication with the immobilizer system of the vehicle • RF (UHF) communication, used for communication between radio identification devices and vehicle HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 5 of 10 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 4 FS1901S Technical data summary Markets USA, Canada Model name FS1901S DC Supply voltage range Approx. 2.2V to 3.2 V Technology RF (UHF) Number of RF channels (1) 3 RF channel frequencies (1) 433.46 MHz 433.92 MHz 434.36 MHz RF radiated power Approx. 78 dBμV/m @ 3m (average) Mode of operation Simplex TX only (RKE mode) Half duplex TRX (PKE mode) Modulation method FSK (F1D) Frequency deviation +/- 7.8 KHz (RKE mode) +/ - 20 KHz (PKE mode) Data rate 7.8 Kbit / s (RKE mode) 19.2 Kbit / s (PKE mode) RF Antenna Integrated PCB loop LF Operating frequency 125 kHz Modes of operation LF detector Passive Transponding (1) Not all channels may be used for every RF mode of operation Table 1: Versions of Hella FS1901S HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 6 of 10 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 5 FS1901S pictures The following illustrations show the exterior view of the FS1901S devices. The images are exemplary, other designs e.g. with less buttons or less side buttons or different button labels or different button positions or different colors or different customer label or different finish may exist. Picture 1: FS1901S (3 top buttons, no side button) top Picture 2: FS1901S (3 top buttons, no side button) top Picture 3: FS1901S (4 top buttons, no side button) top Picture 4: FS1901S (4 top buttons, no side button) top Picture 5: FS190…

Text truncated - open the document above for the full version.

HELLA F - 1070 EN _ H KG (20 2 2 – 0 4 - 0 4 ) HELLA GmbH & Co. KGaA Rixbecker Straße 75, 59552 Lippstadt Deutsche Bank AG, Lippstadt IBAN DE59 4167 0027 0608 5013 00 SWIFT DEUTDE 3B416 VAT Ident. No. DE813832619 Head Office Lippstadt Commercial Register District Court Paderborn HRB 6857 General Partner HELLA Geschäftsführungsgesellschaft mbH, Lippstadt (District Court Paderborn HRB 5650) Managing Directors Dr. Rolf Breidenbach (CEO), Dr. Lea Corzilius, Yves Andres, Dr. Frank Huber, Bernard Schäferbarthold, Björn Twiehaus Chairman of the Supervisory Board Klaus Kühn Name Phone +49294138 E-mail Date Christoph Spiegel 33177 [email protected] 2022-09-13 Letter of Authorization Company: HELLA GmbH & Co. KGaA Address: Rixbecker Straße 75, 59552 Lippstadt / Germany Product Name: Passive Entry/Passive Start Radio Identification Devices Model Number: FS1901S FCC Identifier: NBGFS1901S We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. HELLA GmbH & Co. KGaA Rixbecker Straße 75 59552 Lippstadt, Germany Tel. + 49 2941 38-0 Fax + 49 2941 38-7133 www.hella.com Name: Christoph Spiegel Date: 2022-09-14 Title: Head of Program Management and Homologation Signature of applicant:

HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 7 of 26 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 5 FS1901S pictures The following illustrations show the exterior view of the FS1901S devices. The images are exemplary, other designs e.g. with less buttons or less side buttons or different button labels or different button positions or different colors or different customer label or different finish may exist. Picture 1: FS1901S (3 top buttons, no side button) top Picture 2: FS1901S (3 top buttons, no side button) top Picture 3: FS1901S (4 top buttons, no side button) top Picture 4: FS1901S (4 top buttons, no side button) top Picture 5: FS1901S (4 top buttons, no side button) top Picture 6: FS1901S (5 top buttons, no side button) top HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 8 of 26 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 Picture 7: FS1901S (5 top buttons, no side button) top Picture 8: FS1901S (5 top buttons, no side button) top Picture 9: FS1901S (3 top buttons, 2 side buttons) top Picture 10: FS1901S (4 top buttons, 2 side buttons) top Picture 11: FS1901S (4 top buttons, 2 side buttons) top Picture 12: FS1901S (5 top buttons, 2 side buttons) top Side button Side button Side button Side button Side button Side button Side button Side button HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 9 of 26 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 Picture 13: FS1901S (VW, no side button) back Picture 14: FS1901S (Seat, no side button) back Picture 15: FS1901S (Skoda, no side button) back Picture 16: FS1901S (Cupra, no side button) back Picture 17: FS1901S (Ford, no side button) back HELLA GmbH & Co. KGaA 59552 Lippstadt FS1901S Date: 2022-09-07 Processed: O. Kushova E-CA-D-HW Dr. F. Panhwar E-CA-D-HW Revision: 1.2 Page 10 of 26 This document is confidential. Its contents are not to be exploited, passed on or disclosed to third parties without our expr ess permission. All rights are reserved. Copyright Protection: Confidential - ISO 16016 Picture 18: FS1901S (VW, 2 side buttons) back Picture 19: FS1901S (Seat, 2 side buttons) back Picture 20: FS1901S (Skoda, 2 side buttons) back Picture 21: FS1901S (Cupra, 2 side buttons) back Picture 22: FS1901S (Ford, 2 side buttons) back Side button Side button Side button Side button Side button Side button Side button Side button Side button Side button

FS1901S LABEL LOCATION

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TESTREPORT Report No.:STS2209307W01 Issued for HELLA GmbH & Go. KGaA Rixbecker Straße 75 59552 Lippstadt / Germany Product Name: Passive Entry - Passive Start Radio identification device Brand Name: Hella Model Name: FS1901S Series Model: N/A FCC ID: NBGFS1901S Test Standard: FCC Part 15.231 S T L A B S Page 2 of 36 Report No.: STS2209307W01 TEST REPORT CERTIFICATION Applicant’s Name ........................ : HELLA GmbH & Go. KGaA Address ...................................... : Rixbecker Straße 75 59552 Lippstadt / Germany Manufacturer's Name ................. : HELLA GmbH & Go. KGaA Address ..................................... : Rixbecker Straße 75 59552 Lippstadt / Germany Product Description Product Name ............................. : Passive Entry - Passive Start Radio identification device Brand Name ............................... : Hella Model Name ............................... : FS1901S Series Model ............................... : N/A Test Standards .......................... : FCC Part 15.231 Test Procedure ........................... : ANSI C63.10-2013 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of STS, this document only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test .......................................... : 08 Sept. 2022 Date of performance of tests ................. : 08 Sept. 2022 ~ 20 Sept. 2022 Date of Issue ........................................ : 20 Sept. 2022 Test Result ............................................ : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 36 Report No.: STS2209307W01 TABLE OF CONTENTS Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 6 1.2 MEASUREMENT UNCERTAINTY 6 2. GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF THE EUT 7 2.2 DESCRIPTION OF THE TEST MODES 8 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 9 2.5 EQUIPMENTS LIST 10 3. EMC EMISSION TEST 12 3.1 CONDUCTED EMISSION MEASUREMENT 12 3.2 TEST PROCEDURE 13 3.3 TEST SETUP 13 3.4 TEST RESULTS 13 4. RADIATED EMISSION MEASUREMENT 14 4.1 RADIATED EMISSION LIMITS 14 4.2 TEST PROCEDURE 16 4.3 DEVIATION FROM TEST STANDARD 16 4.4 TEST SETUP 17 4.5 EUT OPERATING CONDITIONS 18 4.6 TEST RESULTS 18 4.7 FIELD STRENGTH CALCULATION 19 5. BANDWIDTH TEST 28 5.1 LIMIT 28 5.2 TEST REQUIREMENTS 28 5.3 TEST PROCEDURE 28 5.4 TEST SETUP 28 5.5 EUT OPERATION CONDITIONS 28 5.6 TEST RESULTS 29 6. DUTY CYCLE 31 6.1 TEST PROCEDURE 31 6.2 TEST SETUP 31 6.3 EUT OPERATION CONDITIONS 31 6.4 TEST RESULTS 32 Page 4 of 36 Report No.: STS2209307W01 TABLE OF CONTENTS Page 7. AUTOMATICALLY DEACTIVATE 33 7.1 STANDARD REQUIREMENT 33 7.2 TEST PROCEDURE 33 8. ANTENNA REQUIREMENT 35 8.1 STANDARD REQUIREMENT 35 8.2 EUT ANTENNA 35 APPENDIX 1-PHOTOS OF TEST SETUP 36 Page 5 of 36 Report No.: STS2209307W01 Revision History Rev. Issue Date Report NO. Effect Page Contents 00 20 Sept. 2022 STS2209307W01 ALL Initial Issue Page 6 of 36 Report No.: STS2209307W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part 15.231,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission N/A -- 15.205(a)/15.209/ 15.231.(b) Radiated Spurious Emission PASS -- 15.231(a)(1)/ 15.231(b)(2) Transmission requirement PASS -- 15.231(C) 20 dB Bandwidth PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) “N/A” denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2013. 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.87dB 2 Unwanted Emissions, conducted ±2.895dB 3 All emissions, radiated 9K-30MHz ±3.80dB 4 All emissions, radiated 30M-1GHz ±4.09dB 5 All emissions, radiated 1G-6GHz ±4.92dB 6 All emissions, radiated>6G ±5.49dB 7 Conducted Emission (9KHz-30MHz) ±2.73dB Page 7 of 36 Report No.: STS2209307W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Passive Entry - Passive Start Radio identification device Trade Name Hella Model Name FS1901S Series Model N/A Model Difference N/A Frequency band 433.46MHz, 433.92MHz, 434.36MHz Rating Input: DC 3V, 0.235A Modulation Type FSK Antenna Type PCB Gain 0dBi Hardware version number 21 Software version number 7 Connecting I/O Port(s) N/A Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications orthe User Manual. 2. The antenna information refer the manufacturer provide report, applicable only to the tested sample identified in the report. Due to the incorrect antenna information, a series of problems such as the accuracy of the test results will be borne by the customer. Page 8 of…

Text truncated - open the document above for the full version.

Any reproduction of this document must be done in full. No single part of this document may be reproduced without permission from STS, all test data presented in this report is only applicable to presented test sample. Shenzhen STS Test Services Co., Ltd. A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China TEL: +86-755 3688 6288 FAX: +86-755 3688 6277 E-mail:[email protected] RADIO TEST REPORT Report No: STS2209307H01 Issued for HELLA GmbH & Go. KGaA Rixbecker Straße 75 59552 Lippstadt / Germany Product Name: Passive Entry - Passive Start Radio identification device Brand Name: Hella Model Name: FS1901S Series Model: N/A FCC ID: NBGFS1901S Test Standard: FCC 47CFR §2.1093 S T L A B S Page 2 of 9 Report No.: STS2209307W01 Test Report Certification Applicant’s Name ................. : HELLA GmbH & Go. KGaA Address ................................. : Rixbecker Straße 75 59552 Lippstadt / Germany Manufacturer's Name .......... : HELLA GmbH & Go. KGaA Address ................................. : Rixbecker Straße 75 59552 Lippstadt / Germany Product Description Product Name ........................ : Passive Entry - Passive Start Radio identification device Brand Name ......................... : Hella Model Name .......................... : ... : FS1901S Series Model .......................... : N/A Standards ............................. : FCC 47CFR §2.1093 447498 D04 Interim General RF Exposure Guidance v01 This report shall not be reproduced except in full, without the written approval of STS, this document only be altered or revised by STS, personal only, and shall be noted in the revision of the document. Date of Test ........................................... : Date of receipt of test item ..................... : 08 Sept. 2022 Date (s) of performance of tests ............. : 08 Sept. 2022 ~ 20 Sept. 2022 Date of Issue .......................................... : 20 Sept. 2022 Test Result.............................................. : Pass Testing Engineer : (Chris Chen) Technical Manager : (Sean she) Authorized Signatory : (Bovey Yang) Page 3 of 9 Report No.: STS2209307W01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 9 Page 4 of 9 Report No.: STS2209307W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 20 Sept. 2022 STS2209307H01 ALL Initial Issue Page 5 of 9 Report No.: STS2209307W01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Passive Entry - Passive Start Radio identification device Brand Name Hella Model Name FS1901S Series Model N/A Model Difference N/A Product Description The EUT is Passive Entry - Passive Start Radio identification device. Operation Frequency: 433.46MHz, 433.92MHz, 434.36MHz Modulation Type: FSK Antenna gain: 0dBi Antenna Designation: PCB antenna Rating Input: DC 3V, 0.235A Hardware version number 21 Software version number 7 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : A 1/F, Building B, Zhuoke Science Park, No.190 Chongqing Road, HepingShequ, Fuyong Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 9 Report No.: STS2209307W01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 7 of 9 Report No.: STS2209307W01 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . Page 8 of 9 Report No.: STS2209307W01 For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID.: NBGFS1901S DSC Setup photo Model name: FS1901S DSC radiation L DSC radiation H