NI3-SI-7800BWireless LAN AP

SENAO International 1 17 SENAO International 2 17 1. Understanding the Hardware 1.1 Hardware Configuration RJ-45 Ethernet Connector – Provides 10 Mbps connectivity to a wired Ethernet LAN. Reset Button – By holding this down for more than 3 seconds, the unit will reset to its factory default settings. Power Supply Connector – Connects to the power adapter. 1.2 Hardware Installation A. Configure your notebook or PC with a wireless LAN card. B. For a wired LAN, connect your PC’s Ethernet port to the unit’s LAN port via an Ethernet cable. C. For WLAN, position the unit in a proper location. D. Plug in the power cord into the power outlet. SENAO International 3 17 2. System Consists of Administrator SettingsFirmware UpgradeResetRestore Defaults 1. Administrator Settings Enter new password and then click save and restart SENAO International 4 17 2. Firmware Upgrade step 1 step 2 Click Browse to find new Firmwarethen click save and restart 3. Reset Click Reset SENAO International 5 17 4. Restore Defaults Click Restore Defaults 3. LAN Consists of LAN SettingsDNS Settings 1. LAN Settings Change IP AddressSubnet Mask Default and Gateway and then click save and restart SENAO International 6 17 2. DNS Settings Enable DNS Relay Servicechange Domain Name Suffix and Primary Domain Name Server Address and then click save and restart 4. Services 1. Network Servives Consists of SNMP ServerDHCP ServerSystem Log DaemonEasy Setup Wizard A. SNMP Server step 1 Enable and then click Configure to enter into settings step 2 SENAO International 7 17 Read only community , enter public Read write community, enter private After modifications, click save and restart SENAO International 8 17 B. DHCP Server step 1 Enable and click Configure to enter into settings step 2 Change IP Pool starting AddressIP Pool Ending Address and Lease Time and then click save and restart SENAO International 9 17 C. System Log Daemon step 1 Enable and click Configure to enter into settings step 2 Change System Log Daemon IP Address and System Log Daemon Port number and then click save and restart SENAO International 10 17 D. Easy Setup Wizard Click Enable to use Easy Setup Wizard SENAO International 11 17 5. Wireless Consists of SettingsOperational ModeSecurity SettingsMAC Filtering 1. Settings Click save and restart after change 2. Operational Mode Click save and restart after change SENAO International 12 17 3. Security Settings Click save and restart after change 4. MAC Filtering Click save and restart after change SENAO International 13 17 6. Information Consists of System StatusWireless StatusAssociation ListLAN StatisticsWireless StatisticsDHCP Client List 1. System Status You can find LAN and System Information settings here 2. Wireless Status You can find SSID and Channel settings here SENAO International 14 17 3. Association List You can find what wireless LAN or AP are attached to SI 7800B AP 4. LAN Statistics You can find the Total BytesTotal PacketsTotal CRC here SENAO International 15 17 5. Wireless Statistics You can find Unicast PacketsBroadcast PacketsMulticast Packets here 6. DHCP Client List You can find which client are connected to server when AP Enable DHCP Sever was used SENAO International 16 17 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. SENAO International 17 17 IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

APPENDIX A. Photographs of EUT

REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A1 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A2 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A3 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A4 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A5 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A6 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A7 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A8 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A9 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A10 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A11 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A12 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255 REPORT NO. : F452811 SPORTON International Inc. PAGE NUMBER : A13 OF A13 TEL : 886-2-2696-2468 ISSUED DATE : July 01, 2004 FAX : 886-2-2696-2255

FCC ID: NI3-SI-7800B Issued on Jul. 31, 2004 Report No.: F452811 SPORTON International Inc. TEL : 886-2-2696-2468 FAX : 886-2-2696-2255 FCC TEST REPORT CATEGORY : Mobile End Product PRODUCT NAME : Wireless LAN AP FCC ID. : NI3-SI-7800B FILING TYPE : Certification BRAND NAME : SENAO MODEL NAME : SI-7800B APPLICANT : SENAO INTERNATIONAL CO., LTD. 2FL, NO. 531 CHUNG CHENG RD., HSIN-TIEN, TAIPEI, TAIWAN, R.O.C. 231 MANUFACTURER : Same as Applicant ISSUED BY : SPORTON INTERNATIONAL INC. 6F, No. 106, Sec. 1, Hsin Tai Wu Rd., His Chih, Taipei Hsien, Taiwan, R.O.C. Statements: The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. Certificate or Test Report could not be used by the applicant to claim the product endorsement by CNLA, NVLAP or any agency of U.S. government. The test equipment used to perform the test are calibrated and traceable to NML/ROC or NIST/USA. _____________________ Dr. Alan Lane Vice General Manager SPORTON International Inc. Lab Code: 200079-0 FCC ID: NI3-SI-7800B Issued on Jul. 31, 2004 Report No.: F452811 SPORTON International Inc. FCC ID. : NI3-SI-7800B TEL : 886-2-2696-2468 Page No. : i FAX : 886-2-2696-2255 Issued Date : Jul. 31, 2004 Table of Contents History of this test report..................................................................................................................ii 1. General Description of Equipment under Test.............................................................................................1 1.1. Applicant..........................................................................................................................................................................................1 1.2. Manufacturer ...................................................................................................................................................................................1 1.3. Basic Description of Equipment under Test ....................................................................................................................................1 1.4. Features of Equipment under Test..................................................................................................................................................1 1.5. Table for Carrier Frequencies .........................................................................................................................................................2 2. Test Configuration of the Equipment under Test.........................................................................................3 2.1. Description of the Test ....................................................................................................................................................................3 2.2. Frequency Range Investigated .......................................................................................................................................................3 2.3. Description of Test Supporting Units...............................................................................................................................................3 2.4. Connection Diagram of Test System ..............................................................................................................................................4 2.5. Test Software ..................................................................................................................................................................................5 3. Test Location and Standards .........................................................................................................................6 3.1. Test Location...................................................................................................................................................................................6 3.2. Test Conditions ...............................................................................................................................................................................6 3.3. Standards for Methods of Measurement .........................................................................................................................................6 3.4. DoC Statement................................................................................................................................................................................6 4. List of Measurements......................................................................................................................................7 4.1. Summary of the Test Results ..........................................................................................................................................................7 5. Test Result .......................................................................................................................................................8 5.1. Test of 6dB Spectrum Bandwidth ( DSSS System ) .......................................................................................................................8 5.2. Test of Maximum Peak Output Power ..........................................................................................................................................11 5.3. Test of Peak Power Spectral Density............................................................................................................................................12 5.4. Test of Band Edges Emission .......................................................................................................................................................15 5.5. Test of AC Power Line Conducted Emission .....................................................................................................................…

Text truncated - open the document above for the full version.