NPESVDN002DVD/VCR Combo

MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01 User's Manual ◆ In the initial settings, exclusive channel for DVD/Video is set to CH 3. Set the TV channel to CH3 before using it. ◆Region code of DVD/Video player for home is 1 or ALL. In inserting a disc with other region code, it does not operate. Please only use a disc with region code 1 or ALL. ◆ is a 'Prohibition' mark. If this mark is displayed in operating the product, please wait for a while, then use it. If 'Prohibition' mark continues to be displayed in pressing a button after that, it means the button does not function in the currently played disc. 1 MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. WARNING : CAUTION : IMPORTANT FOR LASER PRODUCTS LASER : This Digital Video Disc Player employs a Laser System. To ensure proper use of this product please read this owners manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location - see service procedure. Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated. DO NOT STARE INTO THE BEAM. DANGER : Visible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION : Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel. FCC NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rule. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception; which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experience radio/TV technical for help. CAUTION: Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Important Safeguards Important Safeguards 2 MODEL NO.: PLTDVCR600,PLDVCR500/2002.10.01 This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user. 1 READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2 RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3 HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. 4 FOLLOW INSTRUCTIONS All operating and use instructions should be followed. 5 CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6 ATTACHMENTS Do not use attachments unless recommended by the units manufacturer as they may cause hazards. 7 WATER AND MOISTURE Do not use this unit near water- for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool and the like. Caution : Maintain electrical safety. Powerline operated equipment or accessories connected to this unit should bear the UL listing mark or CSA certification mark on the accessory itself and should not be modified so as to defeat the safety features. This will help avoid any potential hazard from electrical shock or fire. If in doubt, contact qualified service personnel. 8 ACCESSORIES Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand , tripod, bracket, or table recommended by the manufacturer. 8-A A unit and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit and cart combination to overturn. 9 VENTILATION Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, o…

Text truncated - open the document above for the full version.

RF TUNER ANT IN RF OUT A/ V OUT A/ V IC CHIP 3.5795MHz DC12V INPUT POWER (MAIN) LOGIC KEY/ FUNCTION (VCR) MiCOM IC CHIP 14.318MHz Hi - Fi IC CHIP A/ V IN, OUTPUT AUDIO OUT A/ V IN VCR PART DVD PART POWER (DVD) IF MiCOM 8.38MHz DVD LOADER LOGIC KEY/ FUNCTION (DVD)

FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab.

FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. IDENTIFICATION LABEL: PROPOSED FCC ID LABEL The label included following statement will be attached on the rear side of product. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Made in Korea FCC ID : NPESVDN002 FCC ID AREA

FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab.

Page 1 of 15 FCC ID. : NPESVDN002 File No. : E02OR-029 This report shall not be reproduced except in full without our written approval. EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-Si, Kyounggi-Do, 464-860, Korea. (TEL: +82-31-765-8289 FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. ELECTROMAGNETIC EMISSION C OMPLIANCE REPORT FOR FCC CLASS B CERTIFICATION Test report file number : E024R-008 Applicant : SAMJUNG Co., Ltd. Address : 152-78 Hwanggye-Ri, Taean-Eup, Hwasung-Si, Kyounggi-Do, 445-977, Korea Manufacturer : SAMJUNG Co., Ltd. Address : 152-78 Hwanggye-Ri, Taean-Eup, Hwasung-Si, Kyounggi-Do, 445-977, Korea Type of Equipment : CAR DOUBLE FCC ID. : NPESVDN002 Model / Type No. : SVD-N411 Serial number : N/A Total page of Report : 14 pages (including this page) Date of Incoming : September 10, 2002 Date of issue : October 15, 2002 SUMMARY The equipment complies with the regulation; FCC CFR 47 PART 15 SUBPART B, Class B. This test report contains only the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Prepared by: Reviewed by: Y. K. Nam / Assist. Chief Engineer Y. K. Kwon / Chief Manager EMC Dept. EMC Dept. ONETECH Corp. ONETECH Corp. Page 2 of 15 FCC ID. : NPESVDN002 File No. : E02OR-029 This report shall not be reproduced except in full without our written approval. EMC-004 (Rev.0) HEAD OFFICE : #505 SK APT. Factory 223-28, Sangdaewon 1 Dong, Jungwon-Gu, Seongnam-City, Kyunggi-Do, 462-121, Korea (TEL: +82-31-746-8500, FAX: +82-31-746-8700) EMC Testing Dept : 426-1 Daessangryung-Ri, Chowol-Myun, Kwangju-Si, Kyounggi-Do, 464-860, Korea. (TEL: +82-31-765-8289 FAX: +82-31-766-2904) ONETECH Testing & Evaluation Lab. CONTENTS Page 1. VERIFICATION OF COMPLIANCE...............................................................................................................3 2. GENERAL INFORMATION................................................................................................................................4 2.1 PRODUCT DESCRIPTION................................................................................................................................4 2.2 MODEL DIFFERENCES: ..................................................................................................................................4 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................4 2.4 TEST SYSTEM DETAILS.................................................................................................................................5 2.5 TEST METHODOLOGY....................................................................................................................................5 2.6 TEST FACILITY..............................................................................................................................................5 3. SYSTEM TEST CONFIGURATION.................................................................................................................5 3.1 JUSTIFICATION...............................................................................................................................................5 3.2 EUT EXERCISE SOFTWARE............................................................................................................................6 3.3 CABLE DESCRIPTION.....................................................................................................................................6 3.4 NOISE SUPPRESSION PARTS ON CABLE.........................................................................................................6 3.5 EQUIPMENT MODIFICATIONS........................................................................................................................6 3.6 CONFIGURATION OF TEST SYSTEM...............................................................................................................7 3.6.1 Line Conducted Test :.............................................................................................................................................7 3.6.2 Radiated Emission Test ..........................................................................................................................................7 3.6.3 Output Signal Level Test.........................................................................................................................................7 3.6.4 Output Terminal Conducted Spurious Emission test..............................................................................................7 3.6.5 Transfer Switch Isolation Test ................................................................................................................................8 4. PRELIMINARY TEST............................................................................................................................................8 4.1 AC POWER LINE CONDUCTED EMISSION TEST.............................................................................................8 4.2 RADIATED EMISSIONS TESTS........................................................................................................................8 5. FINAL RESULT OF MEASURMENT.............................................................................................................9 5.1 CONDUCTED EMISSION TEST........................................................................................................................9 5.2. RADIATED EMISSION TEST.........................................................................................................................10 5.3 OUTPUT TERMINAL SIGNAL LEVEL TES…

Text truncated - open the document above for the full version.

FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab. FCC ID. : NPESVDN002 File No. : E02OR-029 ONETECH Testing & Evaluation Lab.