NT8-JDCPNavigation Display module with BT connectivity

Page No : 1 Radio Type Approval Page No : 2 Radio Type Approval : CANADA : Page No : 3 Radio Type Approval : USA : Page No : 4 Radio Type Approval : EUROPEAN UNION(EU) : Page No : 5 Thank You

FCC, Request for non-disclosure Date: 16-Jul-10 RF_501, Issue 6 Page 1 of 1 Company Name: Visteon Electronics Germany GmbH Address: An der RaumFabrik 33b City: Karlsruhe Country: Germany To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: NT8-JDCP Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: Planned Release Date STC: (notes 2, 3, 4, 5) Date: 03/29/2021 Name and signature of applicant: Imad Hjije Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

Visteon Corporation One Village Center Drive Van Buren Township, MI, 48111 Declaration of Authorization We Name: Visteon Corporation Address: One Village Center Drive City: Van Buren Township, MI, 48111 Country: USA Declare that: Name Representative of agent: Imad Hjije, Abdellah Ahakki, Teoman.Soner-Sunar (1) Agent Company name: 7layers GmbH Address: Borsigstr. 11 City: 40880 Ratingen Country Germany is authorized to apply for Certification of the following product(s): Product description: Navigation display module with BT connectivity Model: JDCP Trademark: Visteon FCC ID NT8-JDCP Validity/ expiry date: This agreement expires one year from the current date. on our behalf. Date: .. City: .. Name: .. (2) Function: ............................... Signature: . Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent. 23-March-2021 Van Buren Township Terry SanSouci Validation Engineer

Visteon Confidential Navigation display module with BT connectivity Model Name: JDCP (J1D, J1C1, P4D, D2K/D3K, D2G2/D3G) LABEL’s limitations 20-April-2021 2 Introduction There are significant difficulties to incorporate an external certification label due to: 1.Limitations for the dimensions –small device 2.Lack of surfaces to incorporate a label 3.Esthetic and trade limitations 3 Limitations of the device SMALL device Dimensions : ~ 7 cm x 5 cm Weight:~ 0,070 kg 4 Limitations of the device Lack of surfaces to incorporate a label 5 Limitations of the device –QR code 1.There are no options to include the labels and additional information in the QR code – Current QR code content and dimensions - -Visteon part number, Customer part number -SW version, HW version and the Production date. -dimensions -10 mm x 10 mm If we include content model: JDCPthe size will increase by 15 mm x15 mm, so that the label can not be fixed between the connectors. 6 Limitations of the device –Traceability label The traceability label can be extended onlywith model: JDCPcontent. We need to keep some buffer for the manufacturing purposes (related to the nearby convex surfaces). 7 Limitations of the device Esthetic and trade limitations -OEM will not accept the labels on the external surface -Final product (motorcycle) will be uncompetitive 8 Visteon approach Visteon would like to use an option to include certification labels and model name in the User manual, using the exemptions in the legislation for: -Small device installed in the vehicle -Impracticable to incorporate the label With the suggested option Visteon will follow the approach: -Model name JDCP will be included on the label as is shown. -All certification labels and warnings will be included on the User manual and can be effectively visible for the final user. -Spare parts will be marked on the packaging.

Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Frank Spiller Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Alexandre Norré-Oudard Steuer-Nr./TAX-No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF RF Exposure Assessment Report Reference: MDE_VIS_2017_MPE_02 on Navigation display module with BT connectivity JDCP FCC ID: NT8-JDCP IC: 3043A-JDCP REPORT REFERENCE: MDE_VIS_2017_MPE_02 Page 2 of 6 Summary Type of Report RF Exposure calculation for the Navigation display module with BT connectivity JDCP Applicable FCC and ISED Rules For RF Exposure: OET Bulletin 65 Edition 97‐01 August 1997 FCC 47 CFR §1.1307 FCC 47 CFR §1.1310 RSS‐102 Issue 5 – March 2015 Report version control Rev Version Release date Changes Version validity - 27.04.2021 Initial version Valid (responsible for report) Mr. Imad Hjije REPORT REFERENCE: MDE_VIS_2017_MPE_02 Page 3 of 6 Administrative Data: Testing Laboratory Company Name: 7layers GmbH Address: Borsigstr. 11 40880 Ratingen Germany Report Template Version: 2018-03-13 Project Data Responsible for report: Mr. Imad Hjije Date of Report: 2021-04-27 Testing Period: - (please see referenced test reports) Applicant Data Company Name: Visteon Corporation Address: One Village Center Drive Van Buren Township, MI, 48111, U.S.A Contact Person: Heidi Sepanic, Corporative Secretary Manufacturer Data Company Name: please see Applicant data Address: - - - Contact Person: - REPORT REFERENCE: MDE_VIS_2017_MPE_02 Page 4 of 6 Test object Data General Description of Radio Device Kind of Device product description Navigation Display Module with BT connectivity for two wheeler vehicle Product name Navigation display module with BT connectivity Type JDCP Declared EUT data by the supplier Voltage Type DC Voltage Level 13.5 V Antenna / Gain Integral / 2.2 dBi Tested Modulation Type GFSK General product description A 1.49" TFT with TBT (Turn By Turn navigation) and FOTA feature for 2 wheeler products. The module is customized to suit premium variants for Royal Enfield models. The Module syncs up with mobile app developed by Royal Enfield. The app then transmits the TBT information from mobile to display module via Bluetooth. The SW updates or image changes if any, will be uploaded via FOTA. Specific product description for the EUT BT-LE transceiver in the 2.4 GHz band. EUT ports (connected cables during testing): Cable Harness incl. DC Tested datarates 1 Mbps Special software used for testing NXP software provided by Applicant Assessed Radio Devices Sample Name Sample Code Description EUT B DE1105009ag01 Radiated Sample Sample Parameter Value Serial No. - HW Version PWB25068 SW Version V07.05 Comment Sample with integral Antenna Sample Name Sample Code Description EUT C DE1105009al01 Conducted Sample Sample Parameter Value Serial No. - HW Version PWB25068 SW Version V07.05 Comment Sample with temporary external antenna connector REPORT REFERENCE: MDE_VIS_2017_MPE_02 Page 5 of 6 General description of ancillary equipment Device Details (Manufacturer, Type Model, HW, SW, S/N) Description - - - General description of auxiliary equipment Device Details (Manufacturer, Type Model, HW, SW, S/N) Description AUX 1 -, -, -, -, - USB to TTL Converter General description of setups Setup Details Description Setup_01 EUT A, AUX 1 - Documents used for assessment supplied to applicant Radio technology Details Description Bluetooth MKW36A/35A An ultra-low power, highly integrated Bluetooth® Low Energy wireless microcontroller FCC 15.247 Test Report: max. -1.2 dBm conducted Measured RF Output Power Ambient temperature: 24 °C Air Pressure: 1005 hPa Humidity: 31 % BT LE 1 Mbit/s Band Channel No. Frequency [MHz] Peak Power [dBm] Limit [dBm] Margin to Limit [dB] E.I.R.P [dBm] 2.4 GHz ISM 0 2402 -2.2 30.0 32.2 0.0 19 2440 -1.9 30.0 31.9 0.3 39 2480 -1.2 30.0 31.2 1.0 REPORT REFERENCE: MDE_VIS_2017_MPE_02 Page 6 of 6 RF Exposure Evaluation Standards OET Bulletin 65 Edition 97-01 August 1997 RSS-102 Issue 5 – March 2015 Test limits As specified in Table 1B of 47 CFR 1.1310 – Limits for Maximum Permissible Exposure (MPE), Limits for General Population/Uncontrolled Exposure. Frequency range (MHz) Power density (mW/cm²) 300 – 1,500 f/1500 1,500 – 100,000 1.0 Limits specified per RSS-102, Issue 5. Frequency range (MHz) Power density (W/m²) Power density (mW/cm²) 300 – 6000 0.02619 f 0.6834 mW/cm² = W/m² * 0.1 Equation OET bulletin 65, page 18, edition 97-01: 푆= 푃퐺 4휋푅 2 = 퐸퐼푅푃 4휋푅² Where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the centre of radiation of the antenna Test Protocol <End of Assessment> Operational Bands Frequency (MHz) Antenna Gain (dBi) Antenna Gain -numeric- (mW/cm²) Output Power -conducted- (dBm) Duty Cycle correction factor Max. mean output power (dBm) Output Power -conducted- (mW) Output Power (EIRP) (mW) IC Limit (mW/cm²) FCC Limit (mW/cm²) Power Density value (mW/cm²) Margin to FCC Limit (mW/cm²) Margin to IC Limit (mW/cm²) BLE 2.4 GHz24802.21.6596-1.200-1.200.761.260.54691.00000.00030.99970.5466

Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Frank Spiller Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Alexandre Norré-Oudard Steuer-Nr./TAX-No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF FCC Measurement/Technical Report on Navigation display module with BT connectivity JDCP FCC ID: NT8-JDCP IC: 3043A-JDCP Test Report Reference: MDE_VIS_2017_FCC_02 TEST REPORT REFERENCE: MDE_VIS_2017_FCC_02 Page 2 of 30 Table of Contents 1 Applied Standards and Test Summary 3 1.1 Applied Standards 3 1.2 FCC-IC Correlation Table 4 1.3 Measurement Summary 5 2 Revision History / Signatures 6 3 Administrative Data 7 3.1 Testing Laboratory 7 3.2 Project Data 7 3.3 Applicant Data 7 3.4 Manufacturer Data 7 4 Test object Data 8 4.1 General EUT Description 8 4.2 EUT Main components 8 4.3 Ancillary Equipment 9 4.4 Auxiliary Equipment 9 4.5 EUT Setups 9 4.6 Operating Modes / Test Channels 9 4.7 Product labelling 10 5 Test Results 11 5.1 Conducted Emissions at AC mains 11 5.2 Radiated Emissions 14 6 Test Equipment 19 7 Antenna Factors, Cable Loss and Sample Calculations 23 7.1 LISN R&S ESH3-Z5 (150 kHz – 30 MHz) 23 7.2 Antenna R&S HFH2-Z2 (9 kHz – 30 MHz) 24 7.3 Antenna R&S HL562 (30 MHz – 1 GHz) 25 7.4 Antenna R&S HF907 (1 GHz – 18 GHz) 26 7.5 Antenna EMCO 3160-09 (18 GHz – 26.5 GHz) 27 7.6 Antenna EMCO 3160-10 (26.5 GHz – 40 GHz) 28 8 Measurement Uncertainties 29 9 Photo Report 30 TEST REPORT REFERENCE: MDE_VIS_2017_FCC_02 Page 3 of 30 1 APPLIED STANDARDS AND TEST SUMMARY 1.1 APPLIED STANDARDS Applicable FCC Rules Prepared in accordance with the requirements of FCC Rules and Regulations as listed in 47 CFR Ch.1 Parts 2 and 15 (10-1-19 Edition). The following subparts are applicable to the results in this test report. Part 2, Subpart J - Equipment Authorization Procedures, Certification Part 15, Subpart B – Unintentional Radiators § 15.107 Conducted limits § 15.109 Radiated emission limits; general requirements Applicable ISED Standards ICES-Gen, Issue 1 ICES-003, Issue 6 Note: ANSI C63.4–2014 is applied. TEST REPORT REFERENCE: MDE_VIS_2017_FCC_02 Page 4 of 30 1.2 FCC-IC CORRELATION TABLE Correlation of measurement requirements for Information Technology Equipment (ITE) from FCC and IC Measurement FCC reference IC reference Conducted Emissions (AC Power Line) §15.107 ICES-003 Issue 6: 6.1 Radiated Spurious Emissions §15.109 ICES-003 Issue 6: 6.2 Remarks: 1. FCC Part 15 subpart B, ICES 003 and CISPR 22 contain different definitions of Class A and Class B limits, i.e. which class is applicable to which kind of EUT. ICES 003 and CISPR 22 distinguish between the location where the EUT is intended to operate whilst FCC refers to the method of commercial distribution (distributive trades). 2. The correct assignment of the appropriate class to the concrete EUT is not scope of this test report! 3. A radio apparatus that is specifically subject to an Industry Canada Radio Standard Specification (RSS) and which contains an ITE is not subject to ICES-003 provided the ITE is used only to enable operation of the radio apparatus and the ITE does not control additional functions or capabilities. 4. ISM (Industrial, Scientific or Medical) radio frequency generators, though they may contain ITE, are excluded from the definition of ITE and are not subject to ICES-003. They are instead subject to the Interference-Causing Equipment Standard ICES-001, which specifically addresses ISM radio frequency generators. TEST REPORT REFERENCE: MDE_VIS_2017_FCC_02 Page 5 of 30 1.3 MEASUREMENT SUMMARY 47 CFR CHAPTER I FCC PART 15 Subpart B § 15.107 / Class B Conducted Emissions at AC mains The measurement was performed according to ANSI C63.4 Final Result OP-Mode AC mains connection, Test setup Setup Date FCC IC via auxiliary equipment, stand-alone S01_AF01 2021-04-01 Passed Passed 47 CFR CHAPTER I FCC PART 15 Subpart B § 15.109 / Class B Radiated Emissions The measurement was performed according to ANSI C63.4 Final Result OP-Mode AC mains connection, Measurement range, Test setup Setup Date FCC IC via auxiliary equipment, 1 GHz - 18 GHz, stand-alone S01_AF01 2021-03-26 Passed Passed via auxiliary equipment, 30 MHz - 1 GHz, stand-alone S01_AF01 2021-03-24 Passed Passed N/A: Not applicable N/P: Not performed TEST REPORT REFERENCE: MDE_VIS_2017_FCC_02 Page 7 of 30 3 ADMINISTRATIVE DATA 3.1 TESTING LABORATORY Company Name: 7layers GmbH Address: Borsigstr. 11 40880 Ratingen Germany The test facility is accredited by the following accreditation organisation: Laboratory accreditation no: DAkkS D-PL-12140-01-01| -02 | -03 FCC Designation Number: DE0015 FCC Test Firm Registration: 929146 ISED CAB Identifier DE0007; ISED#: 3699A Responsible for accreditation scope: Dipl.-Ing. Marco Kullik Report Template Version: 2021-01-13 3.2 PROJECT DATA Responsible for testing and report: M.Sc. Joel Asongwe Employees who performed the tests: documented internally at 7Layers Date of Report: 2021-04-21 Testing Period: 2021-03-24 to 2021-04-01 3.3 APPLICANT DATA Company Name: Visteon Corporation Address: One Village Center Drive Van Buren Township, MI, 48111, U.S.A Contact Person: Heidi Sepanic, Corporative Secretary 3.4 MANUFACTURER DATA Company Name: please see Applicant Data Address: Contact Person: TEST REPORT REFERENCE: MDE_VIS_2017_FCC_02 Page 8 of 30 4 TEST OBJECT DATA 4.1 GENERAL EUT DESCRIPTION Kind of Device product description A 1.49" TFT with TBT (Turn By Turn navigation) and FOTA feature for 2 wheeler products. The module is customized to su…

Text truncated - open the document above for the full version.

Test Laboratory: 7layers GmbH Borsigstrasse 11 40880 Ratingen Germany Note: The following test results relate only to the devices specified in this document. This report shall not be reproduced in parts without the written approval of the test laboratory. 7layers GmbH Geschäftsführer/ Borsigstraße 11 Managing Directors: Registergericht/registered: a Bureau Veritas 40880 Ratingen, Germany Frank Spiller Düsseldorf HRB 75554 Group Company T +49 (0) 2102 749 0 Bernhard Retka USt-Id.-Nr./VAT-No. DE203159652 F +49 (0) 2102 749 350 Alexandre Norré-Oudard Steuer-Nr./TAX-No. 147/5869/0385 www.7layers.com Commerzbank AG Account No. 303 016 000 Bank Code 300 400 00 IBAN DE81 3004 0000 0303 0160 00 Swift Code COBADEFF Photo Report on Navigation display module with BT connectivity JDCP Report Reference: MDE_VIS_2017_FCC_01_Photo_Setups Test report Reference: MDE_VIS_2017_FCC_01_Photo_Setups Page 2 of 6 Photo 1: Test setup for radiated measurements (9 kHz - 30 MHz) Test report Reference: MDE_VIS_2017_FCC_01_Photo_Setups Page 3 of 6 Photo 2: Test setup for radiated measurements (30 MHz - 1 GHz) Test report Reference: MDE_VIS_2017_FCC_01_Photo_Setups Page 4 of 6 Photo 3: Test setup for radiated measurements (1 GHz – 26 GHz) Test report Reference: MDE_VIS_2017_FCC_01_Photo_Setups Page 5 of 6 Photo 4: Test setup for radiated measurements, EUT Test report Reference: MDE_VIS_2017_FCC_01_Photo_Setups Page 6 of 6 Photo 5: Test setup for conducted measurements on R&S TS8997