NTHEQUR1235APSelf Ballasted Lamp

USER'S GUIDE THE TEXT OF THIS INSTRUCTIONS WILL BE PRINTED ON THE SURFACE OF THE INDIVIDUAL BOX AT THE TIME OF MASS PRODUCTION. 1. PRODUCT SPECIFICATION 2. USER'S GUIDE ELECTRONIC BALLAST INSTANT ON, FLICKER-FREE AND LIGHT WEIGHT RELIABLE OPERATING TEMPERATURE RANGE : -10TO 40 1)CAUTION NOT FOR USE WITH DIMMERS. NOT FOR USE WITH TOTALLY ENCLOSED RECESSED FIXTURES. RISK OF ELECTRIC SHOCK - USE ONLY IN DRY LOCATIONS. THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXIT FIXTURES OR EMERGENCY EXIT LIGHTS. NOT FOR USE WHERE EXPOSED TO THE WEATHER. 2) NOTE This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communition equipment operating between 0.45-30MHz. Do not touch the lamp as soon as turn off because it is very hot. MODEL NO.VOLTAGE(V)FREQUENCY(Hz)POWER(W)CURRENT(A)LIFE(Hrs) EQUR1235AP12060350.510,000

KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 1 of 1 External photo

KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 1 of 1 FCC ID Sample Label LABELLING REQUIREMENTS PER ∫∫ ∫∫2.928 The Label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. Model Number: EQUR1235AP FCC ID : NTHEQUR1235AP Jung Woo International Inc. Made in Korea

KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 1 of 1 Label location FCC ID LABEL LOCATION

KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 1 of 2 Internal photo KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 2 of 2 Internal photo

KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 1 of 13 Test Report Test Report No.: KTI03EF05002 Registration No.: 99058 Applicant: Jung Woo International Inc. Applicant Address: 598-11, GamJung-Dong, Gimpo-City, Gyunggi-Do, Korea Product: SELF-BALLASTED LAMP FCC ID: NTHEQUR1235AP Model No. EQUR1235AP Receipt No.: 03-0434 Date of receipt: April 29, 2003 Date of Issue: May 15, 2003 Testing location Korea Technology Institute Co., Ltd. 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea Test Standards: FCC/OET MP-5 Rule Parts: FCC Part 18 Equipment Class: RF lighting devices (Consumer Equipment) Test Result: The above mentioned product has been tested and passed. Tested by: E. S. Park/ Engineer Approved by: G. C. Min/ President Signature Date Signature Date Other Aspects : Abbreviations : OK, Pass=passed Fail=failed N/A=not applicable This test report is not permitted to copy partly without our permission. This test result is dependent on only equipment to be used. This test result is based on a single evaluation of one sample of the above mentioned. This test report must not be used by the client to claim product endorsement by NVLAP or any agency of the U.S Government. We certify this test report has been based on the measurement standards that is traceable to the national or international standards. KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 2 of 13 Contents 1. 2. 3. 4. 5. 6. Annex1 Annex2 Contents List of Tables List of Figures List of Photographs General Test Site 2.1 Location 2.2 List of Test and Measurement Instruments 2.3 Test Data 2.4 Test Environment Description of the tested samples 3.1 Rating and Physical characteristics 3.2 Submitted documents Measurement conditions 4.1 Modes of operation 4.2 Additional equipments 4.3 Uncertainty 4.4 Test Setup Emission Test 5.1 Conducted Emissions 5.2 Radiated Emissions Photographs of the Test Set-up Label Photographs of EUT 2 2 2 3 3 3 4 4 4 5 5 5 6 6 6 6 6 7 8 11 12 14 15 16~19 List of Tables Table 1 List of test and measurement equipment Table 2 Test Data. Conducted Emissions Table 3 Test Data. Radiated Emissions List of Figures Figure 1 Spectral Diagram, LINE-PE Figure 2 Spectral Diagram, Neutral-PE List of Photographs Photograph 1 Setup for Conducted Emissions Photograph 2 Setup for Radiated Emissions 4 11 13 9 10 16 17 KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 3 of 13 1. General This equipment has been shown to be capable of compliance with the applicable technical standards and was tested in accordance with the measurement procedures as indicated in this report. We attest to the accuracy of data. All measurements reported herein were performed by Korea Technology Institute Co., LTD. And were made under Chief Engineer’s supervision. We assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. 2. Test Site Korea Technology Institute Co., LTD 2.1 Location 51-19, Sanglim3-Ri, Docheok-Myeun, Gwangju-Shi, Gyeungki-Do, Korea The Test Site is in compliance with ANSI C63.4/2001 for measurement of radio Interference. KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 4 of 13 2.2 List of Test and Measurement Instruments Table 1 : List of Test and Measurement Equipment Conducted Emissions Kind of Equipment Type S/N Calibrated until Spectrum Analyzer R3261C 61720417 11.2003 Field Strength Meter ESPC 832827/011 9.2003 LISN KNW407 8-1157-2 10.2003 LISN EM-7823 115019 3.2004 Conducted Cable N/A N/A 11.2003 Radiated Emissions Kind of Equipment Type S/N Calibrated until Field Strength Meter ESPC 832827/011 9.2003 Spectrum Analyzer R3261C 61720417 11.2003 Pre Amplifier 8447D 2944A06874 11.2003 BiconiLog Antenna 3142B 1705 12.2003 Bilog Antenna CBL6140A 1217 5.2004 Open Site Cable N/A N/A 11.2003 Antenna Mast DETT-03 N/A N/A Antenna & Turntable controller DETT-04 91X519 N/A 2.3 Test Date Date of Application : April 29, 2003 Date of Test : May 2, 2003 2.4 Test Environment See each test item’s description. KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 5 of 13 3. Description of the tested samples The EUT is SELF-BALLASTED LAMP 3.1 Rating and Physical Characteristics - Consumption Power: 35 W - Input Voltage: AC 120 V - Frequency of input line: 60 Hz - Current : 0.5 A 3.2 Submitted Documents User’s Guide Block Diagram KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 6 of 13 4. Measurement Conditions Testing Input Voltage: AC 120V. 4.1 Modes of Operation The EUT was in the following operation mode during all testing; After warming up time of 30 minutes, Testing in mode of Lamp on. 4.2 Additional Equipment DEVICE TYPE Manufacturer M/N S/N FCC ID None 4.3 Uncertainty 1) Radiated disturbance Uc (Combined standard Uncertainty) = 1.8dB Expanded uncertainty U=KUc K = 2 U = 3.6dB 2) Conducted disturbance Uc = 0.88dB U = KUc=2xUc = 1.8dB KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 7 of 13 4.4 Test setup EUT KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 8 of 13 5. EMISSION Test 5.1 Conducted Emissions Result : Pass The line-conducted facility is located inside a 2.3M x 3.5M x 5.5M shielded closure. The shielding effectiveness of the shielded room is in accordance with MIL-Std-285 or NSA 605-05. A 1m x 1.5m wooden table 80cm high is placed 80cm away from the conducting ground plane and 40cm away from the sidewall of the shielded room. Electro-Metroics Model EM-7823 (9kHz- 30MHz)50ohm/50 uH Line-Impedance Stabilization Networks (LISN) are bonded to the shielded room. The EUT is powered from the Electro-Metroics LISN and the support equipment is powered from the Kyoritsu LISN. Power to the LISN are filtered by a high-current high-insertion loss shield enclosures power line filters (100dB 14kHz-1GHz). The purpose of the filter is to attenuate …

Text truncated - open the document above for the full version.

KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 1 of 2 6. Photograph of the Test Set-Up Photograph 1 : Setup for radiated Emissions KTI03EF05002 FCC ID: NTHEQUR1235AP Korea Technology Institute Co., Ltd. Page 2 of 2 Photograph 2 : Setup for Conducted Emissions