NZTSI03ABase Transmitter for Wireless Headphone

FCC ID: NZTSI03A Report No.: 070218FIA01 1 FCC TEST REPORT REPORT NO.: 070218FIA01 MODEL NO.: SI-03A RECEIVED: Feb. 15, 2007 TESTED: Feb. 15 ~ Mar. 14, 2007 ISSUED: Mar. 14, 2007 APPLICANT: Artchief Industries Ltd ADDRESS: Flat B, 16/F Chinabest International Centre, No.8 Kwai On Road, Kwai Chung, N.T., HongKong. ISSUED BY: ADT (Shanghai) Corporation ADDRESS: 2F, Building C, No.1618, Yishan Rd., 201103, Shanghai, China This test report consists of 19 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by A2LA or any government agencies. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. This report contains data that were produced under Laboratory ADT (Shanghai) Corporation. ADT (Shanghai) Corporation. V 1.0 FCC ID: NZTSI03A Report No.: 070218FIA01 2 Table of Contents 1 CERTIFICATION......................................................................................................... 3 2 SUMMARY OF TEST RESULTS ................................................................................ 4 3 GENERAL INFORMATION ......................................................................................... 5 3.1 GENERAL DESCRIPTION OF EUT ........................................................................... 5 3.2 DESCRIPTION OF TEST MODES ............................................................................. 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS............................................. 6 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................... 7 4 TEST PROCEDURE AND RESULT............................................................................ 8 4.1 CONDUCTED EMISSION MEASUREMENT.............................................................. 8 4.1.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 8 4.1.2 TEST INSTRUMENTS ................................................................................................ 8 4.1.3 TEST PROCEDURE ................................................................................................... 8 4.1.4 TEST SETUP .............................................................................................................. 9 4.1.5 EUT OPERATING CONDITIONS ............................................................................... 9 4.1.6 TEST RESULTS........................................................................................................ 10 4.2 RADIATED EMISSION MEASUREMENT................................................................. 12 4.2.1 LIMITS OF RADIATED EMISSION MEASUREMENT .............................................. 12 4.2.2 TEST INSTRUMENT ................................................................................................ 13 4.2.3 TEST PROCEDURE ................................................................................................. 14 4.2.4 TEST SETUP ............................................................................................................ 15 4.2.5 EUT OPERATING CONDITION ................................................................................ 15 4.2.6 TEST RESULT .......................................................................................................... 16 4.3 BAND EDGES MEASUREMENT ............................................................................. 18 4.3.1 LIMITS OF BAND EDGES MEASUREMENT ........................................................... 18 4.3.2 TEST INSTRUMENTS .............................................................................................. 18 4.3.3 TEST PROCEDURE ................................................................................................. 18 4.3.4 DEVIATION FROM TEST STANDARD..................................................................... 18 4.3.5 EUT OPERATING CONDITION ................................................................................ 18 4.3.6 TEST RESULTS........................................................................................................ 19 5 INFORMATION ON THE TESTING LABORATORY ................................................. 20 FCC ID: NZTSI03A Report No.: 070218FIA01 3 1 CERTIFICATION PRODUCT : Wireless Headphone with Transmitter BRAND NAME : Addicon MODEL NO : SI-03A TEST ITEM : Engineering Sample APPLICANT : Artchief Industries Ltd STANDARDS : FCC Part 15, Subpart C(15.235) ANSI C63.4-2003 We, ADT (Shanghai) Corporation, declare that the equipment above has been tested in our facility and found compliance with the requirement limits of applicable standards. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. TECHNICAL ACCEPTANCE : , DATE:Mar. 14, 2007 Bright Tong Engineering Supervisor APPROVED BY : , DATE:Mar. 14, 2007 Wallace Pan Director of Operations FCC ID: NZTSI03A Report No.: 070218FIA01 4 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPE RESULTREMARK 15.207 Conducted Emission Test PASS Minimum passing margin is –28.55dB at 0.277MHz 15.235 15.209 Radiated Emission Test PASS Minimum passing margin is –3.45dB at 66.51MHz 15.235 (b) Band Edge Measurement Test PASS Meet the requirement of limit FCC ID: NZTSI03A Report No.: 070218FIA01 5 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Wireless Headphone with Transmitter MODEL NO. SI-03A POWER SUPPLY 120Vac, 60Hz POWER ADAPTER SUPPLIED 2m, non-shielded, non-detachable CABLE SUPPLIED 1m, non-shielded, non-detachable MODULATION TYPE FM CARRIER FREQUENCY OF EA…

Text truncated - open the document above for the full version.

CE RE