O4G-BELLCOMB-ABike Speed and Cadence Combo Transmitter

PHOTOGRAPH OF THE PRODUCT FRONT VIEW OF THE PRODUCT PHOTOGRAPH OF THE PRODUCT REAR VIEW OF THE PRODUCT

 0678 PDF created with FinePrint pdfFactory Pro trial version www.pdffactory.com

PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT TOP VIEW PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT BOTTOM VIEW

FCC ID: O4G-BELLCOMB-A Circuit Description The 2400-2483.5 MHz IC oscillator drives the base of IC the final/buffer amplifier. The modulation provided by IC. The output of IC has the matching network consisting of L100, L102 and X103, C105, C108 that limit the harmonic content and effect the proper coupling of the antenna to the output stage. Antenna, Ground and Power Source No External Antenna. There is no external ground connection. The ground is only that of the printed circuit board. Electric current is supplied by a 3 Volt (“CR2032” size battery x 1) primary battery Operation Descriptions The transmitter is a cycle meter operating at 2400-2483.5MHz band. The transmitter is powered by a 3V battery (“CR2032” size battery x 1) and the transmitting frequency is crystal controlled. The operation is achieved by different combinations of form pulse modulating signal on the 2400-2483.5 MHz carrier frequency. Remarks: The transmitter is a sensor . The EUT continues to transmit while sense a movement, Modulation by IC; and type is Pulse modulation.

KENDY ENTERPRISE LTD. Date: Page No.: Oct 24 2007 of 15 1 INDENTED PARTS LIST JANETPrepared by: Confirmed by: Approved by: Mechanical Division Electronic Division Engineering Manager Project Manager Q.C. Procurement Production Management Verified by: Model No.:BS64700 ARGOS 6.0 BLACKBURN TI CASE W/RD KEYS Revision:1.04 Description: Doc. Control No.: Level BOM No. Item No.DescriptionUom Qty. BOM Remarks Scrap Rate % GIFT BOX ARGOS 6.0 BS64700C8-BS647B 1 pc1.00000ECN06930 14JUL07 0.00 CD ROM BELL ARGOS MANUAL W/SLEEVE 29-8850 1 set1.00000*ECN06930 14JUL07 Pending sample 0.00 LENS PROTECTIVE LABEL PVC W/ PRINTING BBJET D2-M1232 1 pc1.000000.00 1PLY CARTON BOX 16"X 10-5/8" ARGOS 4/5/6 C1-1371 1 pc0.062502/32* ECN07219 25/SEPT/07 SSA 0.00 3PLY CARTON BOX ID 16-1/2"X11"x11-1/4" ARGOS 4/5/6/ C3-1382 1 pc0.031251/32* ECN07219 25/SEPT/07 SSA 0.00 PAPER STAND BBJET ARGOS 4.0/ 5.0/6.0 BS645/BS647 C8-BS645C 1 pc1.00000*ECN07219 25/SEPT/07 SSA 0.00 WARRANTY & REPAIR GUIDE BBJET 2.0-6.0 DELPHI 13 LANG. 11-154000 1 pc1.000000.00 MANUAL BELL NEURO 4/5/6 AROGS11-171000 1 pc1.00000*ECN07219 25/SEPT/07 SSA 0.00 PET SHEET 0.3mm THK. CLEAR W/RECYCLE MARK ARGOS 4/5/6 26-10090CL 1 pc1.00000*ECN07219 25SEP07 0.00 BACK SHEET PP 0.5 THK BLACK ARGOS 4.0-6.0 26-10100BK 1 pc1.00000*ECN07219 25SEP07 0.00 CHEST STRAP PAPER SLEEVE 30X33X8MM WATCH A C8-SI501F 1 pc1.000000.00 SHIPPING CARTON BAR CODE LABEL ARGOS 6.0 D2-B1611 1 pc0.062502/32 *ECN07219 25/SEPT/07 SSA 0.00 FIBRE LABEL GIFT BOX GT70301, PR15201,PR05000,PR08800 D2-R0739A 1 pc2.000000.00 60CM SOFT ELASTIC BELT SQ.STITCHING LE TREND 29-6490 1 set1.000000.00 WING ON SOLDER PASTE 0 LEAD FREE LF-RMAC7H2 (500g/CAN) D1-C854 1 pc0.00017FOR CPU1.00 KENDY ENTERPRISE LTD. Date: Page No.: Oct 24 2007 of 15 2 INDENTED PARTS LIST JANETPrepared by: Confirmed by: Approved by: Mechanical Division Electronic Division Engineering Manager Project Manager Q.C. Procurement Production Management Verified by: Model No.:BS64700 ARGOS 6.0 BLACKBURN TI CASE W/RD KEYS Revision: Description: Doc. Control No.: Level BOM No. Item No.DescriptionUom Qty. BOM Remarks Scrap Rate % AISU SOLDER WIRE LEAD FREE 0.8mm LFW-CU005-90 SPEED C0-111 1 pc0.00200FOR CPU0.00 BOND WIRE 1MIL ALWI0031 EL1-4% ALW-29S BL15-18g 1000'/2"ROLL 83-SI50003 1 pc0.00105FOR CPU0.00 HOT MELT ADHESIVE(STICK FORM) "#C001,CLEAR" D1-A481B 1 lb0.00044FOR TR0.00 3140 RTV COATING DOW CORNING NET 1LB/Tin D1-C850A 1 pc0.00020FOR CPU0.00 EPOXY EMS A-400-30 Black HD 4.4Kg/4Litre D1-E485 1 pc0.00004FOR CPU0.00 CONFORMAL COATING(DCA05L) 5 LITRE/TIN OR 1GL/TIN D1-C266CG 1 pc0.00003FOR TR0.00 XYLENE 20 LITER/TIND1-C852 1 pc0.00001FOR TR0.00 PATTEX CONTACT CEMENT PX28N (1TIN =650ml) D1-A132 1 can0.00020FOR CPU0.00 COMPUTER HEAD ARGOS 6.0 BELL SPORT B9-BS6470000 1 B9-BS6470000 set1.000000.00 BOTTOM CASE BLACK ABS W/SENSOR HOLE BELL ARGOS (17-33100ABK) 17-33260ABK 2 pc1.000003.00 LENS SPACER MYLAR 0.2 CLEAR W/DOUBLE SIDE TAPE BBJET 26-969ACL 2 pc1.00000*ECN07274 12OCT07 0.00 O-RING OD 3.8 X 1.0 BLACK NBR 60-70 CONTACT PIN 38-0380BKO 2 pc2.000001.00 RESET PIN BRASS NI-PLEATED BELL ARGOS 48-5430BN 2 pc2.00000ECN06930 14JUL07 0.00 RESET KEY CLEAR SILCONE RUBBER CLEAR CM SERIES 27-04190CL 2 pc2.000001.00 SCREW BT 1.4X4mm TRIANGULAR HEAD DIA 2.2 S/STEEL FOR ECG 92-21404BT22NE 2 pc6.00000*ECN06930 14JUL07 0.00 `O`RING OD 25.1 X 1.0 BLACK CHEST STRAP 38-2510BKOA 2 pc1.000000.00 SENSOR O-RING OD 7.0xID 5.0XDIA 1.0 NBR BLACK TREK ACH 38-0700BKOA 2 pc1.000000.00 TOP CASE WHITE + KEYS + LENS +PADS ASSY BELL ARGOS 6.0 A0-2666A307 2 A0-2666A307 set1.000000.00 KENDY ENTERPRISE LTD. Date: Page No.: Oct 24 2007 of 15 3 INDENTED PARTS LIST JANETPrepared by: Confirmed by: Approved by: Mechanical Division Electronic Division Engineering Manager Project Manager Q.C. Procurement Production Management Verified by: Model No.:BS64700 ARGOS 6.0 BLACKBURN TI CASE W/RD KEYS Revision: Description: Doc. Control No.: Level BOM No. Item No.DescriptionUom Qty. BOM Remarks Scrap Rate % TOP CASE SPRAY WHITE & FILL BK ON LOGO ASSY ARGOS 4.0-6.0 A0-2666A03 3 pc1.0000017-2666AAG Y 0.00 LENS W/SILK SCREEN ASSY BK TEXT/8420 SI MASK ARGO 6.0 A6-2670008 3 pc1.0000017-26700YC L 0.00 INSERT PAD LEFT ABS BLACK BBJET POLISH 17-2712AABK 3 pc1.000000.00 INSERT PAD RIGHT ABS BLACK BBJET POLISH 17-2713AABK 3 pc1.000000.00 `E'RING OD2.4XID0.8X0.2THK (Y080080190) 87-195T 3 pc4.000000.00 Click Disc L6.0 x W4.8 STROKE 0.5-0.6,S/S,F 360gm +/-50gm 44-R060NN 3 pc4.000000.00 KEY A RED 7427 INKFILL BK LOGO W/48-5400BN+38-0160BKO BBJET 29-2671A10RD1 3 29-2671A10RD1 set1.000000.00 BUTTON A ABS RED 7427C W/48-5400BN PIN BBJET POLISH 17-2671AARD 4 pc1.000000.00 TOP BUTTON PIN BRASS NI-P BBJECT48-5400BN 4 pc1.000000.00 KEY O-RING OD1.6 x 0.5 NBR7038-0160BKO 4 pc1.000000.00 KEY B RED 7427 W/48-5400BN +38-0160BKO BBJET 29-2672A10RD 3 29-2672A10RD set1.000000.00 BUTTON B ABS RED W/48-5400BN PIN BBJET POLISH 17-2672AARD 4 pc1.000000.00 TOP BUTTON PIN BRASS NI-P BBJECT48-5400BN 4 pc1.000000.00 KEY O-RING OD1.6 x 0.5 NBR7038-0160BKO 4 pc1.000000.00 KEY C RED 7427 W/48-5400BN +38-0160BKO BBJET 29-2673A10RD 3 29-2673A10RD set1.000000.00 BUTTON C ABS RED W/48-5400BN PIN BBJET POLISH 17-2673AARD 4 pc1.000000.00 TOP BUTTON PIN BRASS NI-P BBJECT48-5400BN 4 pc1.000000.00 KEY O-RING OD1.6 x 0.5 NBR7038-0160BKO 4 pc1.000000.00 KEY D RED 7427 W/48-5400BN +38-0160BKO BBJET 29-2674A10RD 3 29-2674A10RD pc1.000000.00 KENDY ENTERPRISE LTD. Date: Page No.: Oct 24 2007 of 15 4 INDENTED PARTS LIST JANETPrepared by: Confirmed by: Approved by: Mechanical Division Electronic Division Engineering Manager Project Manager Q.C. Procurement Production Management Verified by: Model No.:BS64700 ARGOS 6.0 BLACKBURN TI CASE W/RD KEYS Revision: Description: Doc. Control No.: Level BOM No. Item No.DescriptionUom Qty. BOM Remarks Scrap Rate % BUTTON D ABS RED W/48-5400BN PIN BBJET POLISH 17-2674AARD 4 pc1.000000.00 TOP BUTTON PIN BRASS NI-P BBJECT48-5400BN 4 pc1.000000.00 KEY O-RING OD1.6 x 0.5 NBR7038-0160BKO 4 pc1.000000.00 21-1135A PCB …

Text truncated - open the document above for the full version.

                               

STC Test Report Date : 2008-01-21 Page 1 of 18 No. : HM160631 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre Ltd. For full text of “Conditions of Issuance of Test Report”, please refer to overleaf or refer to the website of Homepage. Applicant (Code DAI001): Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A, Kwai Chung, New Territories, Hong Kong. Manufacturer: Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A, Kwai Chung, New Territories, Hong Kong. Description of Samples: Product: Neuro 6.0 Brand Name: Bell Sport Model Number: Neuro 6.0 FCC ID: O4G-BELLCOMB-A Date Samples Received: 2007-11-22 Date Tested: 2007-11-22 to 2008-01-11 Investigation Requested: Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15: 2006 and ANSI C63.4:2003 for FCC Certification. Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- Dr. LEE Kam Chuen, ElectroMagnetic Compatibility Department For and on behalf of The Hong Kong Standards and Testing Centre Ltd. STC Test Report Date : 2008-01-21 Page 2 of 18 No. : HM160631 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage CONTENT: Cover Page 1 of 18 Content Page 2-3 of 18 1.0 General Details 1.1 Test Laboratory Page 4 of 18 1.2 Applicant Details Page 4 of 18 Applicant Manufacturer 1.3 Equipment Under Test [EUT] Page 5 of 18 Description of EUT operation 1.4 Date of Order Page 5 of 18 1.5 Submitted Sample Page 5 of 18 1.6 Test Duration Page 5 of 18 1.7 Country of Origin Page 5 of 18 2.0 Technical Details 2.1 Investigations Requested Page 6 of 18 2.2 Test Standards and Results Summary Page 6 of 18 3.0 Test Results 3.1 Radiated Emission Page 7-12 of 18 STC Test Report Date : 2008-01-21 Page 3 of 18 No. : HM160631 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage Appendix A List of Measurement Equipment Page 13 of 18 Appendix B Duty Cycle Correction During 100 msec Page 14-16 of 18 Appendix C Photographs Page 17-18 of 18 STC Test Report Date : 2008-01-21 Page 4 of 18 No. : HM160631 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate New Territories, Hong Kong 1.2 Applicant Details Applicant Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A, Kwai Chung, New Territories, Hong Kong. Manufacturer Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A, Kwai Chung, New Territories, Hong Kong. STC Test Report Date : 2008-01-21 Page 5 of 18 No. : HM160631 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.3 Equipment Under Test [EUT] Description of Sample Model Name: Neuro 6.0 Manufacturer: Dayton Industrial Co., Ltd. Brand Name: Bell Sport Model Number: Neuro 6.0 Input Voltage: 3Vd.c. (“CR2032” button cell x 1) 1.3.1 Description of EUT Operation The Equipment Under Test (EUT) is a Dayton Industrial Co., Ltd., Neuro 6.0, the transmission signal is frequency hopping with channel frequency range 2.456.8MHz. 1.4 Date of Order 2007-11-22 1.5 Submitted Sample(s): 1 Sample 1.6 Test Duration 2007-11-22 to 2008-01-11 1.7 Country of Origin China STC Test Report Date : 2008-01-21 Page 6 of 18 No. : HM160631 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 2.0 Technical Details 2.1 Investigations Requested Perform Electromagnetic Interference measurements in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15 Regulations and ANSI C63.4:2003 for FCC Certification. 2.2 Test Standards and Results Summary Tables EMISSION Results Summary Test Condition Test Requirement Test Method Class / Test Result Severity Pass Fail N/A Field Strength of Fundamental & Harmonics Emissions FCC 47CFR 15.249 ANSI C63.4:2003 N/A Radia…

Text truncated - open the document above for the full version.

PHOTOGRAPH OF THE PRODUCT MEASUREMENT OF RADIATED EMISSION TEST SET UP