
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Reed switchMicrocontroller RF modulation module Simple block diagram of Trek Fork Sensor Antenna
Reed switchMicrocontroller RF modulation module Simple block diagram of Trek Fork Sensor Antenna
PHOTOGRAPH OF THE PRODUCT FRONT VIEW OF THE PRODUCT PHOTOGRAPH OF THE PRODUCT REAR VIEW OF THE PRODUCT
PHOTOGRAPH OF THE PRODUCT FRONT VIEW OF THE PRODUCT PHOTOGRAPH OF THE PRODUCT REAR VIEW OF THE PRODUCT
To: David Townzen, UltraVision Security Systems, Inc. [email protected] From: Stan Lyles [email protected] FCC Equipment Authorization Branch Applicant: UltraVision Security Systems, Inc. FCC ID: USJCMD2A-F2 731 Confirmation Number: EA209004 Date of Original E-Mail: 6/22/2009 Subject: FCC Equipment Authorization System Our records indicate that the referenced application has been pending for an extended period. No reply to our request for Technical Information sent via E-Mail to David Townzen, our CRR # 37344 Dated April 20, 2009 has been received. Unless we hear back from you within one week from the date of this FAX, your application will be Dismissed under the provisions of FCC Section 2.917(c). For questions concerning extending short-term confidentiality, please e-mail [email protected]. Do not hit the reply button for this email. To: Jack O'Leary, UltraVision Security Systems, Inc. [email protected] From: Stan Lyles [email protected] FCC Equipment Authorization Branch Applicant: UltraVision Security Systems, Inc. FCC ID: USJCMD2A-F2 731 Confirmation Number: EA209004 Date of Original E-Mail: 6/22/2009 Subject: FCC Equipment Authorization System Our records indicate that the referenced application has been pending for an extended period. No reply to our request for Technical Information sent via E-Mail to David Townzen, our CRR # 37344 Dated April 20, 2009 has been received. Unless we hear back from you within one week from the date of this FAX, your application will be Dismissed under the provisions of FCC Section 2.917(c). For questions concerning extending short-term confidentiality, please e-mail [email protected]. Do not hit the reply button for this email. To: Kouma Sinn, Intertek Testing Services NA Inc. [email protected] From: Stan Lyles [email protected] FCC Equipment Authorization Branch Applicant: UltraVision Security Systems, Inc. FCC ID: USJCMD2A-F2 731 Confirmation Number: EA209004 Date of Original E-Mail: 6/22/2009 Subject: FCC Equipment Authorization System Our records indicate that the referenced application has been pending for an extended period. No reply to our request for Technical Information sent via E-Mail to David Townzen, our CRR # 37344 Dated April 20, 2009 has been received. Unless we hear back from you within one week from the date of this FAX, your application will be Dismissed under the provisions of FCC Section 2.917(c). For questions concerning extending short-term confidentiality, please e-mail [email protected]. Do not hit the reply button for this email.
PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT TOP VIEW PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT BOTTOM VIEW
PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT TOP VIEW PHOTOGRAPH OF THE PRODUCT INNER CIRCUIT BOTTOM VIEW
FCC ID: O4G-TKBKSP-A Circuit Description The 2457.1 MHz crystal oscillator drives the base of IC the final/buffer amplifier. The modulation provided by IC. The output of IC has the matching network consisting of L100, L101 and L102, C108, C110 that limit the harmonic content and effect the proper coupling of the antenna to the output stage. Antenna, Ground and Power Source No external antenna. There is no external ground connection. The ground is only that of the printed circuit board. Electric current is supplied by a 3 Volt (βLR44β size battery x 2) primary battery Operation Descriptions The transmitter is a movement sensor operating at 2457.1MHz band. The transmitter is powered by a 3V battery (βLR44β size battery x 2) and the transmitting frequency is crystal controlled. The operation is achieved by different combinations of form pulse modulating signal on the 2457.1 MHz carrier frequency. Remarks: The EUT transmit when a movement is detected. Modulation by IC; and type is Pulse modulation.
FCC ID: O4G-TKBKSP-A Circuit Description The 2457.1 MHz crystal oscillator drives the base of IC the final/buffer amplifier. The modulation provided by IC. The output of IC has the matching network consisting of L100, L101 and L102, C108, C110 that limit the harmonic content and effect the proper coupling of the antenna to the output stage. Antenna, Ground and Power Source No external antenna. There is no external ground connection. The ground is only that of the printed circuit board. Electric current is supplied by a 3 Volt (βLR44β size battery x 2) primary battery Operation Descriptions The transmitter is a movement sensor operating at 2457.1MHz band. The transmitter is powered by a 3V battery (βLR44β size battery x 2) and the transmitting frequency is crystal controlled. The operation is achieved by different combinations of form pulse modulating signal on the 2457.1 MHz carrier frequency. Remarks: The EUT transmit when a movement is detected. Modulation by IC; and type is Pulse modulation.
May 30, 2007Document Date TK61700 Model No. 1 SET QTY. DIGITAL SPEED TX ASSEMBLY Description : TREK FORK TRANSMITTER Cover Page Section : 21-1153 FORK SPEED TX W/SMT 21-1153 FORK SPEED TX W/SMT SOLDER PART ASSY 2.4G TREK ASSY 2.4G TREK 1 SET 1 SET Remarks : 002-9139Document Control No. Preliminary Part List Document Title 1/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. FAi Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: Assembly No. : A1 B1 C1 B9-TK6170000 OLD Part No. : A8-115300300 A8-115300100 Model Name:TREK FORK SPEED TX B9-TK6170000 MIS pn A8-115300300 A8-115300100 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 SET QTY. DIGITAL SPEED TX ASSEMBLY Description : TREK FORK TRANSMITTER Housing Section : TOP CASE ABS BLACK BOTTOM CASE ABS BLACK BATTERY COVER BLACK NYLON+ ALLEN SCREW FH M3X10 HEAD 5.0 CASE O-RING OD 15.0XDIA1.0 SCREW COVER SILICONE RUBBER BK FORK SENSOR FORK SENSOR FIBER FORK SENSOR S/S TREK FORK SENSOR BLACK NBR70 70 DEG TREK FORK SENSOR 1 1 1 1 1 1 BATTERY 1.5V GPA76 GP BATTERY 1.5V A76 ENERGIZER BATT.FOAM DIA5.5 X 2MM Alkaline Zn/MnO2 Alkaline Zn/MnO2 W/ADHESIVE TAPE BLACK 2 2 1 Remarks : PENDING PENDING ECN06843 18Jun07 ECN06843 18Jun07 ECN06843 18Jun07 002-9139Document Control No. Preliminary Part List Document Title 2/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. William Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: Assembly No. : A1 * * * OR B9-TK6170000 OLD Part No. : 17-32670ABK 17-32680ABK 17-32690XBK 94-23010M50NE 38-1500BKO 27-4150BK 10-01504GP 10-01504EN 124-165 Model Name:TREK FORK SPEED TX B9-TK6170000 MIS pn 17-32670ABK 17-32680ABK 17-32690XBK 94-23010M50NE 38-1500BKO 27-4150BK 10-01504GP 10-01504EN 24-1650DR 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 set QTY. 21-1153 FORK SPEED TX W/SMT Description : SOLDER PART ASSY 2.4G TREK SPEED TX Section : CRYSTAL 32768Hz 2x6mm 12.5pF REED SWITCH ORD9216 (1013) BATTERY CONTACT SPRING DIA0.5 +VE BATTERY CONTACT NICKEL ANTENNA P. BRONZE 0.7X20.7mm BATT.FOAM DIA5.5 X 2MM +/-5ppM EPSON 10-13AT MAX DIA 2.2x14MM OKI S/S NICKEL FORK SENSOR FORK SENSOR GOLD PLATED TREK FORK TX. W/ADHESIVE TAPE BLACK 1 1 1 1 1 1 21-1153 FORK SPEED TX W/SMT ASSY 2.4G TREK 1 SET Remarks : Y200 SW1 ECN06843 18Jun07 ECN06843 18Jun07 ANTENNA PENDING PCB TX FR4 DS GF 0.8mm 2.4GHz IC ANTSTX01 TI TSSOP20 ANT TX TREK FORK TX Digital RoHS REV.B T/R (DSI30006) RoHS 1 1 1/40 IC2 ECN06788 30MAY07 002-9139Document Control No. Preliminary Part List Document Title 3/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. FAi Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: IC ANTSTX01 TI TSSOP20 ANT TX IC nRF2402G-REEL 2.4GHz QFN16 Crystal TSX-4025 16MHz DSI1508 REV.B FLASH T/R (DSIxxxxx) TX Nordic VLSI T/R (DSI30005) TN4-25888 9pF TOYOCOM RoHS 1 1 1 IC2 IC3 Y100 Inductor 18nH 5% L-07C18NJV6T Inductor 2.7nH 5% L-07C2N7SV4T Inductor 6.8nH 5% L-07C6N8JV4T Ind 4.7nH L-07C4N7SV4T +-0.3nH C DIODE LMDL914T1G SOD323 CAP 0.9pF 50V +-0.1p JOHANSON 0402 JOHANSON T/R (DSI2155) 0402 JOHANSON T/R (DSI2138) 0402 JOHANSON T/R (DSI2142) 0402 JOHANSON DSI2140 RoHS LRC LEAD FREE COG 500R07S0R9BV4T T/R DSI1807 1 1 1 1 1 1 L101 X103 ECN06765 24MAY07 L100 L102 ECN06765 24MAY07 D200 C108 ECN06765 24MAY07 C RES 10M OHM 1/16W +-5% 0402 C RES 22K OHM 1/16W +-5% 0402 C RES 1M OHM 1/16W +-5% 0402 T/R T/R T/R 6 1 1 R200,RID41,RID01,RS L0,RID30.RID11 R100 R102 R205,RS,RCC RES 100K 1/16W +-5% 0402 T/R3 Assembly No. : B1 * * C1 * OR * * * A8-115300300 OLD Part No. : 68-1110505EP 42-1301013OK 23-3450TN 18-14000TN 23-3510PG 124-165 A8-115300100 21-1153 08-649TIB 08-649TIBF 08-647 68-160003CTO 79-1834JC 79-2724BC 79-6824BC 79-4724BCA 57-330 54-0P99BNTJ 55-1060JT 55-2230JT 55-1050JT 55-1040JT Model Name:TREK FORK SPEED TX A8-115300300 MIS pn 68-1110505EP 42-1301013OK 23-3450TN 18-14000TN 23-3510PG 24-1650DR A8-115300100 21-1153 08-649TIB 08-649TIBF 08-647 68-160003CTO 79-1834JC 79-2724BC 79-6824BC 79-4724BCA 57-330 54-0P99BNTJ 55-1060JT 55-2230JT 55-1050JT 55-1040JT 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 QTY. C RES 5.1M OHM 1/16W +-5% 0402 Description : T/R SPEED TX Section : C RES 4.7 OHM 1/16W +-5% 0402 C CAP 1000pF 16V +-10% X7R C CAP 15pF 25V +-5% NPO 0402 C CAP 0.1uF 6.3V/10V 10% X5R C CAP 4.7pF 25V +-0.25pF NPO C CAP 0.033uF 16V +-10% X7R T/R 0402 T/R T/R 0402 T/R 0402 T/R 0402 T/R 1 3 2 2 1 1 C CAP 2200pF 16V +-5% X7R C CAP 0.01uF 16V +-5% 0402 C TAN 47uF 6.3V +-20% A T/R 0402 T/R X7R T/R 1 2 2 R207 Remarks : R206 C104,C113,CS C111,C112 C200,C203 C103 C109 C110 C107,C114 TC1,TC2 002-9139Document Control No. Preliminary Part List Document Title 4/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. FAi Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: Supplementary AISU SOLDER WIRE LEAD FREE 0.8mm LFW-CU005-90 SPEED 0.002For TX PCB WING ON SOLDER PASTE 0 LEAD THREADLOCKING COMPOUNDS #ISL LF-RMAC7H2 (500g/CAN) -71 RED 50ml/bot.GOOPA LTD. 0.00016 7 0.0005 For TX PCB 1/2000 ECN06746 18May07 Assembly No. : * 55-5150JT OLD Part No. : 55-4R70JT 54-1025KXT 54-1507JNT 54-1044KXT 54-4P77CNT 54-3335KXT 54-2225JXT 54-1035JXT 61-4762MT C0-111 D1-C854 D1-A861 Model Name:TREK FORK SPEED TX 55-5150JT MIS pn 55-4R70JT 54-1025KXT 54-1507JNT 54-1044KXT 54-4P77CNT 54-3335KXT 54-2225JXT 54-1035JXT 61-4762MT C0-111 D1-C854 D1-A861 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 QTY. HEADER CARD TREK SPEEDTRAP Description : SENSOR 403683 V3 Accessory + Packing Section : CABLE TIE L185XW3.6X1.4THK 3PLY CARTON BOX ID 15x11-1/8xβ¦
Text truncated - open the document above for the full version.
May 30, 2007Document Date TK61700 Model No. 1 SET QTY. DIGITAL SPEED TX ASSEMBLY Description : TREK FORK TRANSMITTER Cover Page Section : 21-1153 FORK SPEED TX W/SMT 21-1153 FORK SPEED TX W/SMT SOLDER PART ASSY 2.4G TREK ASSY 2.4G TREK 1 SET 1 SET Remarks : 002-9139Document Control No. Preliminary Part List Document Title 1/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. FAi Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: Assembly No. : A1 B1 C1 B9-TK6170000 OLD Part No. : A8-115300300 A8-115300100 Model Name:TREK FORK SPEED TX B9-TK6170000 MIS pn A8-115300300 A8-115300100 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 SET QTY. DIGITAL SPEED TX ASSEMBLY Description : TREK FORK TRANSMITTER Housing Section : TOP CASE ABS BLACK BOTTOM CASE ABS BLACK BATTERY COVER BLACK NYLON+ ALLEN SCREW FH M3X10 HEAD 5.0 CASE O-RING OD 15.0XDIA1.0 SCREW COVER SILICONE RUBBER BK FORK SENSOR FORK SENSOR FIBER FORK SENSOR S/S TREK FORK SENSOR BLACK NBR70 70 DEG TREK FORK SENSOR 1 1 1 1 1 1 BATTERY 1.5V GPA76 GP BATTERY 1.5V A76 ENERGIZER BATT.FOAM DIA5.5 X 2MM Alkaline Zn/MnO2 Alkaline Zn/MnO2 W/ADHESIVE TAPE BLACK 2 2 1 Remarks : PENDING PENDING ECN06843 18Jun07 ECN06843 18Jun07 ECN06843 18Jun07 002-9139Document Control No. Preliminary Part List Document Title 2/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. William Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: Assembly No. : A1 * * * OR B9-TK6170000 OLD Part No. : 17-32670ABK 17-32680ABK 17-32690XBK 94-23010M50NE 38-1500BKO 27-4150BK 10-01504GP 10-01504EN 124-165 Model Name:TREK FORK SPEED TX B9-TK6170000 MIS pn 17-32670ABK 17-32680ABK 17-32690XBK 94-23010M50NE 38-1500BKO 27-4150BK 10-01504GP 10-01504EN 24-1650DR 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 set QTY. 21-1153 FORK SPEED TX W/SMT Description : SOLDER PART ASSY 2.4G TREK SPEED TX Section : CRYSTAL 32768Hz 2x6mm 12.5pF REED SWITCH ORD9216 (1013) BATTERY CONTACT SPRING DIA0.5 +VE BATTERY CONTACT NICKEL ANTENNA P. BRONZE 0.7X20.7mm BATT.FOAM DIA5.5 X 2MM +/-5ppM EPSON 10-13AT MAX DIA 2.2x14MM OKI S/S NICKEL FORK SENSOR FORK SENSOR GOLD PLATED TREK FORK TX. W/ADHESIVE TAPE BLACK 1 1 1 1 1 1 21-1153 FORK SPEED TX W/SMT ASSY 2.4G TREK 1 SET Remarks : Y200 SW1 ECN06843 18Jun07 ECN06843 18Jun07 ANTENNA PENDING PCB TX FR4 DS GF 0.8mm 2.4GHz IC ANTSTX01 TI TSSOP20 ANT TX TREK FORK TX Digital RoHS REV.B T/R (DSI30006) RoHS 1 1 1/40 IC2 ECN06788 30MAY07 002-9139Document Control No. Preliminary Part List Document Title 3/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. FAi Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: IC ANTSTX01 TI TSSOP20 ANT TX IC nRF2402G-REEL 2.4GHz QFN16 Crystal TSX-4025 16MHz DSI1508 REV.B FLASH T/R (DSIxxxxx) TX Nordic VLSI T/R (DSI30005) TN4-25888 9pF TOYOCOM RoHS 1 1 1 IC2 IC3 Y100 Inductor 18nH 5% L-07C18NJV6T Inductor 2.7nH 5% L-07C2N7SV4T Inductor 6.8nH 5% L-07C6N8JV4T Ind 4.7nH L-07C4N7SV4T +-0.3nH C DIODE LMDL914T1G SOD323 CAP 0.9pF 50V +-0.1p JOHANSON 0402 JOHANSON T/R (DSI2155) 0402 JOHANSON T/R (DSI2138) 0402 JOHANSON T/R (DSI2142) 0402 JOHANSON DSI2140 RoHS LRC LEAD FREE COG 500R07S0R9BV4T T/R DSI1807 1 1 1 1 1 1 L101 X103 ECN06765 24MAY07 L100 L102 ECN06765 24MAY07 D200 C108 ECN06765 24MAY07 C RES 10M OHM 1/16W +-5% 0402 C RES 22K OHM 1/16W +-5% 0402 C RES 1M OHM 1/16W +-5% 0402 T/R T/R T/R 6 1 1 R200,RID41,RID01,RS L0,RID30.RID11 R100 R102 R205,RS,RCC RES 100K 1/16W +-5% 0402 T/R3 Assembly No. : B1 * * C1 * OR * * * A8-115300300 OLD Part No. : 68-1110505EP 42-1301013OK 23-3450TN 18-14000TN 23-3510PG 124-165 A8-115300100 21-1153 08-649TIB 08-649TIBF 08-647 68-160003CTO 79-1834JC 79-2724BC 79-6824BC 79-4724BCA 57-330 54-0P99BNTJ 55-1060JT 55-2230JT 55-1050JT 55-1040JT Model Name:TREK FORK SPEED TX A8-115300300 MIS pn 68-1110505EP 42-1301013OK 23-3450TN 18-14000TN 23-3510PG 24-1650DR A8-115300100 21-1153 08-649TIB 08-649TIBF 08-647 68-160003CTO 79-1834JC 79-2724BC 79-6824BC 79-4724BCA 57-330 54-0P99BNTJ 55-1060JT 55-2230JT 55-1050JT 55-1040JT 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 QTY. C RES 5.1M OHM 1/16W +-5% 0402 Description : T/R SPEED TX Section : C RES 4.7 OHM 1/16W +-5% 0402 C CAP 1000pF 16V +-10% X7R C CAP 15pF 25V +-5% NPO 0402 C CAP 0.1uF 6.3V/10V 10% X5R C CAP 4.7pF 25V +-0.25pF NPO C CAP 0.033uF 16V +-10% X7R T/R 0402 T/R T/R 0402 T/R 0402 T/R 0402 T/R 1 3 2 2 1 1 C CAP 2200pF 16V +-5% X7R C CAP 0.01uF 16V +-5% 0402 C TAN 47uF 6.3V +-20% A T/R 0402 T/R X7R T/R 1 2 2 R207 Remarks : R206 C104,C113,CS C111,C112 C200,C203 C103 C109 C110 C107,C114 TC1,TC2 002-9139Document Control No. Preliminary Part List Document Title 4/5 Page No. Mechanical Division Verified by Electronic Division Engineering Manager Q.C. Procurement Production Management Approved By Part List No. FAi Prepared By Project ManagerConfirmed By : : :: : : : : : : 1.07Part List Version: Supplementary AISU SOLDER WIRE LEAD FREE 0.8mm LFW-CU005-90 SPEED 0.002For TX PCB WING ON SOLDER PASTE 0 LEAD THREADLOCKING COMPOUNDS #ISL LF-RMAC7H2 (500g/CAN) -71 RED 50ml/bot.GOOPA LTD. 0.00016 7 0.0005 For TX PCB 1/2000 ECN06746 18May07 Assembly No. : * 55-5150JT OLD Part No. : 55-4R70JT 54-1025KXT 54-1507JNT 54-1044KXT 54-4P77CNT 54-3335KXT 54-2225JXT 54-1035JXT 61-4762MT C0-111 D1-C854 D1-A861 Model Name:TREK FORK SPEED TX 55-5150JT MIS pn 55-4R70JT 54-1025KXT 54-1507JNT 54-1044KXT 54-4P77CNT 54-3335KXT 54-2225JXT 54-1035JXT 61-4762MT C0-111 D1-C854 D1-A861 617 Module No: May 30, 2007Document Date TK61700 Model No. 1 QTY. HEADER CARD TREK SPEEDTRAP Description : SENSOR 403683 V3 Accessory + Packing Section : CABLE TIE L185XW3.6X1.4THK 3PLY CARTON BOX ID 15x11-1/8xβ¦
Text truncated - open the document above for the full version.
STC Test Report Date : 2007-07-20 Page 1 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre Ltd. For full text of βConditions of Issuance of Test Reportβ, please refer to overleaf or refer to the website of Homepage. Applicant (DAI001): Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. Manufacturer: Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. Description of Samples: Product: Fork Sensor Brand Name: Trek Model Number: Speedtrap FCC ID: O4G-TKBKSP-A Date Samples Received: 2007-06-12 Date Tested: 2007-07-17 Investigation Requested: Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15: 2006 and ANSI C63.4:2003 for FCC Certification. Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- Dr. LEE Kam Chuen, ElectroMagnetic Compatibility Department For and on behalf of The Hong Kong Standards and Testing Centre Ltd. STC Test Report Date : 2007-07-20 Page 2 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage CONTENT: Cover Page 1 of 16 Content Page 2-3 of 16 1.0 General Details 1.1 Test Laboratory Page 4 of 16 1.2 Applicant Details Page 4 of 16 Applicant HKSTC Code Number for Applicant Manufacturer 1.3 Equipment Under Test [EUT] Page 5 of 16 Description of EUT operation 1.4 Date of Order Page 5 of 16 1.5 Submitted Sample Page 5 of 16 1.6 Test Duration Page 5 of 16 1.7 Country of Origin Page 5 of 16 2.0 Technical Details 2.1 Investigations Requested Page 6 of 16 2.2 Test Standards and Results Summary Page 6 of 16 3.0 Test Results 3.1 Radiated Emission Page 7-10 of 16 STC Test Report Date : 2007-07-20 Page 3 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage Appendix A List of Measurement Equipment Page 11 of 16 Appendix B Duty Cycle Correction During 100 msec Page 12-13 of 16 Appendix C Photographs Page 14-16 of 16 STC Test Report Date : 2007-07-20 Page 4 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate New Territories, Hong Kong 1.2 Applicant Details Applicant Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. Manufacturer Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. STC Test Report Date : 2007-07-20 Page 5 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.3 Equipment Under Test [EUT] Description of Sample Model Name: Fork Sensor Manufacturer: Dayton Industrial Co., Ltd. Brand Name: Trek Model Number: Speedtrap Input Voltage: 3Vd.c. (βLR44β size battery x 2) 1.3.1 Description of EUT Operation The Equipment Under Test (EUT) is a Dayton Industrial Co., Ltd. Fork Sensor, the transmission signal is frequency hopping with channel frequency range 2.410-2.470 GHz. 1.4 Date of Order 2007-06-12 1.5 Submitted Sample(s): 1 Sample 1.6 Test Duration 2007-07-17 1.7 Country of Origin China STC Test Report Date : 2007-07-20 Page 6 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 2.0 Technical Details 2.1 Investigations Requested Perform Electromagnetic Interference measurements in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15 Regulations and ANSI C63.4:2003 for FCC Certification. 2.2 Test Standards and Results Summary Tables EMISSION Results Summary Test Condition Test Requirement Test Method Class / Test Result Severity Pass Fail N/A Field Strength of Fundamental & Harmonics Emissions FCC 47CFR 15.249 ANSI C63.4:2003 N/A Radiated Emissions FCC 47CFR 15.209 ANSI C63.4:2003 N/A Notβ¦
Text truncated - open the document above for the full version.
PHOTOGRAPH OF THE PRODUCT MEASUREMENT OF RADIATED EMISSION TEST SET UP
STC Test Report Date : 2007-07-20 Page 1 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from the Hong Kong Standards and Testing Centre Ltd. For full text of βConditions of Issuance of Test Reportβ, please refer to overleaf or refer to the website of Homepage. Applicant (DAI001): Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. Manufacturer: Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. Description of Samples: Product: Fork Sensor Brand Name: Trek Model Number: Speedtrap FCC ID: O4G-TKBKSP-A Date Samples Received: 2007-06-12 Date Tested: 2007-07-17 Investigation Requested: Perform ElectroMagnetic Interference measurement in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15: 2006 and ANSI C63.4:2003 for FCC Certification. Conclusions: The submitted product COMPLIED with the requirements of Federal Communications Commission [FCC] Rules and Regulations Part 15. The tests were performed in accordance with the standards described above and on Section 2.2 in this Test Report. Remarks: ---- Dr. LEE Kam Chuen, ElectroMagnetic Compatibility Department For and on behalf of The Hong Kong Standards and Testing Centre Ltd. STC Test Report Date : 2007-07-20 Page 2 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage CONTENT: Cover Page 1 of 16 Content Page 2-3 of 16 1.0 General Details 1.1 Test Laboratory Page 4 of 16 1.2 Applicant Details Page 4 of 16 Applicant HKSTC Code Number for Applicant Manufacturer 1.3 Equipment Under Test [EUT] Page 5 of 16 Description of EUT operation 1.4 Date of Order Page 5 of 16 1.5 Submitted Sample Page 5 of 16 1.6 Test Duration Page 5 of 16 1.7 Country of Origin Page 5 of 16 2.0 Technical Details 2.1 Investigations Requested Page 6 of 16 2.2 Test Standards and Results Summary Page 6 of 16 3.0 Test Results 3.1 Radiated Emission Page 7-10 of 16 STC Test Report Date : 2007-07-20 Page 3 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage Appendix A List of Measurement Equipment Page 11 of 16 Appendix B Duty Cycle Correction During 100 msec Page 12-13 of 16 Appendix C Photographs Page 14-16 of 16 STC Test Report Date : 2007-07-20 Page 4 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.0 General Details 1.1 Test Laboratory The Hong Kong Standards and Testing Centre Ltd. EMC Laboratory 10 Dai Wang Street, Taipo Industrial Estate New Territories, Hong Kong 1.2 Applicant Details Applicant Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. Manufacturer Dayton Industrial Co., Ltd. 2-12 Kwai Fat Road, 11-A Kwai Chung, N.T., Hong Kong. STC Test Report Date : 2007-07-20 Page 5 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 1.3 Equipment Under Test [EUT] Description of Sample Model Name: Fork Sensor Manufacturer: Dayton Industrial Co., Ltd. Brand Name: Trek Model Number: Speedtrap Input Voltage: 3Vd.c. (βLR44β size battery x 2) 1.3.1 Description of EUT Operation The Equipment Under Test (EUT) is a Dayton Industrial Co., Ltd. Fork Sensor, the transmission signal is frequency hopping with channel frequency range 2.410-2.470 GHz. 1.4 Date of Order 2007-06-12 1.5 Submitted Sample(s): 1 Sample 1.6 Test Duration 2007-07-17 1.7 Country of Origin China STC Test Report Date : 2007-07-20 Page 6 of 16 No. : HM159082 The Hong Kong Standards and Testing Centre Ltd. 10 Dai Wang Street, Taipo Industrial Estate, N.T., Hong Kong Tel: (852) 2666 1888 Fax: (852) 2664 4353 Homepage: www.hkstc.org E-mail: [email protected] This report shall not be reproduced unless with prior written approval from The Hong Kong Standards and Testing Centre Ltd. For Conditions of Issuance of this test report, please refer to the overleaf or Homepage 2.0 Technical Details 2.1 Investigations Requested Perform Electromagnetic Interference measurements in accordance with FCC 47CFR [Codes of Federal Regulations] Part 15 Regulations and ANSI C63.4:2003 for FCC Certification. 2.2 Test Standards and Results Summary Tables EMISSION Results Summary Test Condition Test Requirement Test Method Class / Test Result Severity Pass Fail N/A Field Strength of Fundamental & Harmonics Emissions FCC 47CFR 15.249 ANSI C63.4:2003 N/A Radiated Emissions FCC 47CFR 15.209 ANSI C63.4:2003 N/A Notβ¦
Text truncated - open the document above for the full version.
PHOTOGRAPH OF THE PRODUCT MEASUREMENT OF RADIATED EMISSION TEST SET UP
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.46 GHz - 2.46 GHz | - |
RS HMI Control
Equipment Class
DTS - Digital Transmission System
LINK2CARE
Equipment Class
DTS - Digital Transmission System
E-Bike HMI with BLE and ANT+
Equipment Class
DTS - Digital Transmission System
SMART BIKE SENSOR with Bluetooth and ANT+ function.
Equipment Class
DTS - Digital Transmission System
E-Bike controller with BLE and ANT+ function
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter