O4GPOWERCALHeart Rate Transmitter

Neutron Engineering Inc. Project No.: 1104C137 Page 2 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 2 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 3 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 3 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 4 of 8 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 5 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 5 of 8 1104C137 1104C137

Neutron Engineering Inc. Project No.: 1104C137 Page 6 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 6 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 7 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 7 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 8 of 8 1104C137 1104C137 Neutron Engineering Inc. Project No.: 1104C137 Page 8 of 8 1104C137 1104C137

Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 2 of 38 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutron shall have no liability for any declarations, inferences o r generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limit ation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 3 of 38 Table of Contents Page 1 . CERTIFICATION 5 2 . SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3 . GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 3.4 DESCRIPTION OF SUPPORT UNITS 11 4 . EMC EMISSION TEST 12 4.1 CONDUCTED EMISSION MEASUREMENT 12 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 12 4.1.2 MEASUREMENT INSTRUMENTS LIST 12 4.1.3 TEST PROCEDURE 13 4.1.4 DEVIATION FROM TEST STANDARD 13 4.1.5 TEST SETUP 13 4.1.6 EUT OPERATING CONDITIONS 13 4.1.7 TEST RESULTS 14 4.2 RADIATED EMISSION MEASUREMENT 15 4.2.1 RADIATED EMISSION LIMITS 15 4.2.2 MEASUREMENT INSTRUMENTS LIST 16 4.2.3 TEST PROCEDURE 19 4.2.4 DEVIATION FROM TEST STANDARD 19 4.2.5 TEST SETUP 20 4.2.6 EUT OPERATING CONDITIONS 21 4.2.7 TEST RESULTS (BETWEEN 30 – 1000 MHz) 23 4.2.8 TEST RESULTS (ABOVE 1000 MHz) 25 4.2.9 TEST RESULTS (2400 – 2483.5 MHz) 29 5 . BANDWIDTH TEST 30 5.1 MEASUREMENT INSTRUMENTS LIST 30 5.2 TEST PROCEDURE 30 5.3 DEVIATION FROM STANDARD 30 5.4 TEST SETUP 30 5.5 EUT OPERATION CONDITIONS 30 5.6 TEST RESULTS 31 6 . ANTENNA CONDUCTED SPURIOUS EMISSION 32 Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 4 of 38 Table of Contents Page 6.1 APPLIED PROCEDURES / LIMIT 32 6.1.1 MEASUREMENT INSTRUMENTS LIST 32 6.1.2 TEST PROCEDURE 32 6.1.3 DEVIATION FROM STANDARD 32 6.1.4 TEST SETUP 32 6.1.5 EUT OPERATION CONDITIONS 32 6.1.6 TEST RESULTS 33 7 . EUT TEST PHOTO 36 Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 5 of 38 1. CERTIFICATION E q u i p m e n t : Heart Rate Transmitter Brand Name : N/A Model Name. : POWERCAL A p p l i c a n t : Dayton Industrial Co. Ltd. F a c t o r y : Kendy Enterprise Ltd. A d d r e s s : 2-12 Kwai Fat Road, 11-A Kwai Chung, New Territories, Hong Kong Date of Test : Apr. 19, 2011 ~ Apr. 26, 2011 T e s t I t e m : ENGINEERING SAMPLE Standards : FCC Part15, Subpart C(15.249)/ ANSI C63.4 : 2003 The above equipment has been tested and found compliance with the requirement of the relative standards by Neutron Engineering Inc. EMC Laboratory. The test data, data evaluation, and equipment configuration contained in our test report (Ref No. NEI-FICP-1-1104C137) were obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of NVLAP and TAF according to the ISO-17025 quality assessment standard and technical standard(s). Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 6 of 38 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15, Subpart C (15.249) Canada RSS-210:2010 StandardSection FCC RSS-210 Test Item Judgment Remark 15.207 Conducted Emission - Note(1) 15.209 Radiated Emission PASS 15.249 A2.9(a) Radiated Spurious Emission PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 7 of 38 2.1 TEST FACILITY The test facilities used to collect the test data in this report is DG-C02/DG-CB03at the location of No.3,Jinshagang 1st Road, ShiXia, Dalang Town,Dong Guan, China.523792 Neutron's test firm number for FCC 319330 Neutron's test firm number for IC 4428B-1 2.2 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %。 A. Conducted Measurement : Test Site Method Measurement Frequency Range U，(dB) NOTE DG-C02 CISPR 150 KHz ~ 30MHz 1.94 B. Radiated Measurement : Test Site Method Measurement Frequency Range Ant. H / V U，(dB) NOTE 30MHz ~ 200MHz V 2.48 30MHz ~ 200MHz H 2.16 200MHz ~ 1,000MHz V 2.50 DG-CB03 CISPR 200MHz ~ 1,000MHz H 2.66 Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 8 of 38 3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT Equipment Heart Rate Transmitter Brand Name N/A Model Name. POWERCAL OEM Brand/Model Name N/A Model Difference N/A Product Description The EUT is a Heart Rate Transmitter. Product Type Low Power Communication Device Operation Frequency: 2457 MHz Modulation Type: GFSK Date rate: 1Mbps Number Of Channel 1CH .Please see note 2. An…

Text truncated - open the document above for the full version.

Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 36 of 38 7. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 36 of 38 7. EUT TEST PHOTO Radiated Measurement Photos 9K~30MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 37 of 38 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 37 of 38 Radiated Measurement Photos 30M~1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 38 of 38 Radiated Measurement Photos Above 1000MHz Neutron Engineering Inc. Report No.: NEI-FICP-1-1104C137 Page 38 of 38 Radiated Measurement Photos Above 1000MHz