O4GTITANBluetooth (BLE Watch)

Engineered by HP 2 CONTENTS English . . . . . . . . . . 4 French . . . . . . . . . 15 Regulatory Notices . . . 27 ENGLISH 54 Color Cover: CMYK + COOL GREY 9 + PMS 293; full bleed one side Flat size: 10 x 5 in. Fold 1: saddle-stitched booklet; Color Inside pages: CMYK + COOL GREY 9 +PMS 293 Finished size: 5 x 5 in. AB CHARGING & TURNING ON THE WATCHSETTING THE TIME 1. Gently pull crown out to its outermost position B . 2. Rotate the crown to the correct time. 3. Press the crown to return it to its normal position A . NOTE: If you are storing the watch, make sure to pull the crown out to its outermost position B . 2 1 3 Before you set up the watch, you must charge the watch fully and then turn it on. 1. Charge the watch for at least two hours 1 , 2 , 3 . WARNING: Do not attempt to change the battery yourself. Opening the watch case will void your warranty. Using an incorrect battery may cause the watch to overheat or catch fire. NOTE: The first time you charge the watch, the display might be blank. After you set up the watch, the charging icon is displayed while the watch charges. 2. To turn on the watch, press and hold the top watch button until the setup screen displays. 76 Color Cover: CMYK + COOL GREY 9 + PMS 293; full bleed one side Flat size: 10 x 5 in. Fold 1: saddle-stitched booklet; Color Inside pages: CMYK + COOL GREY 9 +PMS 293 Finished size: 5 x 5 in. 1. Install the Titan Smartwatch app. On your phone, go to watches.hp.com or search for Titan smartwatch in your app store. NOTE: Your phone must have either iOS 8 or higher or Android 4.4 operating system or higher. 2. Make sure that your phone’s Bluetooth ® is turned on. See your phone documentation for instructions. 3. Open the Titan Smartwatch app on your phone, and then follow the on-screen instructions to set up your account. SETTING UP YOUR PHONE APP AND WATCH FOR THE FIRST TIME 4. The phone app automatically searches for nearby watches. Press the top watch button 1 so that the setup screen is displayed and the app can find your watch. 5. In the phone app, select your watch. If prompted, press the top watch button 1 and enter the PIN displayed on your watch. 6. In the phone app, enable notification permissions. You can choose to push any notifications from a third-party app, such as Facebook or Twitter, to the watch. See your phone documentation for instructions for enabling notifications. 7. To configure the watch, in the phone app, select Activity Tracker, World Clock, Notifications, or Preferences. Notifications also controls vibration notification settings. See Vibration Notifications on page 12 for more information. 1 98 Color Cover: CMYK + COOL GREY 9 + PMS 293; full bleed one side Flat size: 10 x 5 in. Fold 1: saddle-stitched booklet; Color Inside pages: CMYK + COOL GREY 9 +PMS 293 Finished size: 5 x 5 in. DISPL AYING THE WATCH STATUS To display the watch status, press and hold button 2 for three seconds. The status dismisses automatically after five seconds. Bluetooth status icon: Appears when Bluetooth is disconnected. Charging status icon: Appears when the watch is connected to power. Battery status icon: Displays remaining battery charge. RESTARTING THE WATCH To restart the watch, press and hold both buttons for three seconds. Press button 2 to confirm. 1 2 NAVIGATING THE WATCH TURNING BLUETOOTH ON OR OFF To turn Bluetooth on or off, press and hold button 2 for three seconds. NAVIGATING BETWEEN APPS To navigate between apps (such as World Clock and Activity Tracker), press button 1 . To scroll the screen to read a text message or view the next page of an app (such as yesterday’s steps in the Activity Tracker app), press button 2 . DISMISSING NOTIFICATIONS To dismiss notifications or to decline a call, press button 1 . Press and hold button 1 to dismiss all notifications. TURNING AIRPLANE MODE ON OR OFF To turn airplane mode on or off, press both buttons. RESETTING TO FACTORY SETTINGS To reset to factory settings, press and hold button 2 while pressing button 1 three times. Press button 2 to confirm. 1110 Color Cover: CMYK + COOL GREY 9 + PMS 293; full bleed one side Flat size: 10 x 5 in. Fold 1: saddle-stitched booklet; Color Inside pages: CMYK + COOL GREY 9 +PMS 293 Finished size: 5 x 5 in. WATCH FUNCTIONS TEXT MESSAGE When you receive a text message, the sender’s name and message are displayed. Press button 2 to scroll and press button 1 to dismiss the text. ACTIVITY TRACKER The activity tracker keeps track of your daily steps and your progress to your daily goal. You can check today and yesterday’s steps on the watch. A notification is displayed when you reach your daily goal. Use the app to check your progress over the week or the month. INCOMING CALL 1 2 When you have an incoming call, the caller’s name is displayed. If the caller is not in your contacts, their phone number is displayed instead. Press button 1 to decline the call. WORLD CLOCK The world clock syncs automatically with your phone. In the app, you can select other time zones to be displayed. Press button 2 to scroll through your selected cities. CALENDAR REMINDERS The watch syncs with the calendar on your phone to notify you of upcoming appointments. Press button 2 to scroll for more information, such as meeting time and location. Press button 1 to dismiss the notification. BAT TERY STATUS When the watch battery has less than a 20% charge, there is a notification. There is also a notification when the watch battery has less than a 10% charge. 1312 Color Cover: CMYK + COOL GREY 9 + PMS 293; full bleed one side Flat size: 10 x 5 in. Fold 1: saddle-stitched booklet; Color Inside pages: CMYK + COOL GREY 9 +PMS 293 Finished size: 5 x 5 in. VIBRATION NOTIFICATIONS In addition to on-screen messages, your watch vibrates to notify you of events. The following table describes the default vibration patterns for notifications. NOTIFICATIONVIBRATION PATTERNDEFAULT Incoming callOn Text messageOn Activity goal reachedOn Calendar reminderOn EmailOff KEY = Short …

Text truncated - open the document above for the full version.

Date 01 st June 2015 BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, DAYTON INDUSTRIAL CO., LTD 2-12 Kwai Fat Road, 11-A Kwai Chung, New Territories, Hong Kong hereby authorize Name: Xavier, TSENG Company:TÜV SÜD Hong Kong Ltd (E&E – EMC) 3/F, West Wing, Lakeside 2, 10 Science Park West Avenue, Science Park, Shatin, Hong Kong. Tel : (852) 3728 6231 E-mail: :[email protected] to act as our agent in all matters relating to applications for equipment authorization , including the signing of all documents relating to these matters the authorization expires on 31 st December 2015. Sincerely, Project Manager:LAP FAI WONG Telephone Number: (852) 2422 4404 Fax: (852) 2480 4627 e-mail: [email protected]

Date: 15 th Oct 2015 BABT TCB BalfourHouse, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD. Confidential request Product: BLE Smart Watch Model: HSTNW-D02W FCC ID: O4GTITAN Dear Sir or Madam, Confidentiality Request Letter Pursuant to§§ 0.457(d) and 0.459 of the FCC Rules, the applicant hereby requests confidential treatment of the information supplied with this application as outlined below: Long Term Confidentiality is requested for the following: - Block Diagram - Schematics - Part L ist - Operational Description The above materials are not available to the public and contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. These materials are only made available to clients and vendors under NDA agreement. Short Term Confidentiality of 180 days is requested for the following: - E xternal Photos - Test Setup Photos - User’s Manual - Internal Photos The above materials are not available to the public and contain trade secrets and proprietary information not customarily released to the public. The application is for products that have not yet been announced to the public and the public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. These materials are only mode available to clients and vendors under NDA agreement.

Appendix B Date: 2015-10-15 Report Number: 60.960.15.139.01 / 60.960.15.140.01 Model No.: HSTNW-D02W Page 1 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix B Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 2 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong

Appendix C Date: 2015-10-15 Report Number: 60.960.15.139.01 / 60.960.15.140.01 Model No.: HSTNW-D02W Page 1 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 2 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 3 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 4 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 5 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 6 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 7 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 8 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix C Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 9 of 9 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong

Date: 2015-10-15 Report Number: 60.960.15.139.01 Model No.: HSTNW-D02W Radiofrequency radiation exposure evaluation According to KDB 447498 D01v05r02 section 4.3.1, >> The 1-g SAR test exclusion thresholds, for 100MHz to 6GHz, at test separation distances ” 50 mm are determined by: Power at 2402MHz = 0.0570 mW EIRP Power at 2440MHz = 0.0579 mW EIRP Power at 2480MHz = 0.0609 mW EIRP [(0.0570 mW) / (5 mm)] · [sqrt (2.402 GHz)] = 0.0176 which is ” 3.0 for 1-g SAR. [(0.0579 mW) / (5 mm)] · [sqrt (2.440 GHz)] = 0.0180 which is ” 3.0 for 1-g SAR. [(0.0609 mW) / (5 mm)] · [sqrt (2.480 GHz)] = 0.0191 which is ” 3.0 for 1-g SAR. Therefore the device is exempt from stand-alone SAR test requirements. >> The fundamental frequency of the EUT is 2402MHz-2480MHz, the test separation distance is < 50mm. (Manufacutuer Specification distance is <5mm) >> The power of EUT measured is: - For 2402MHz: 0.0570mW = 10 log (0.0570) dBm ~ -12.44dBm - For 2440MHz: 0.0579mW = 10 log (0.0579) dBm ~ -12.37dBm - For 2480MHz: 0.0609mW = 10 log (0.0609) dBm ~ -12.15dBm Page 1 of 1 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong

Report Number: 60.960.15.139.01R01 EMC_SZ_FR_22.00 FCC Release 2014-03-20 TÜV SÜD HONG KONG LTD. 3/F, West Wing, Lakeside 2, 10 Science Park W est Avenue, Science Park, Shatin, HK. Tel: +852-2776 1323 Fax: +852-2776 1206 Page 1 of 50 FCC - TEST REPORT Report Number: 60.960.15.139.01R01 Date of Issue:October 28, 2015 Model: HSTNW-D02W Product Type: BLE SMART WATCH Trade Name: Titan JUXT Applicant: DAYTON INDUSTRIAL CO., LTD Address: 2-12 Kwai Fat Road, 11-A Kwai Chung, New Territories, Hong Kong Production Facility : KENDY Enterprise Ltd Address: 2-12 Kwai Fat Road, 11-A Kwai Chung, New Territories, Hong Kong Test Result: „Positive†Negative Total pages including Appendices : 50 TÜV SÜD HONG KONG LTD. is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. TÜV SÜD HONG KONG LTD. reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations TÜV SÜD HONG KONG LTD. shall have no liability for any deductions, inferences or generalizations drawn by the client or others from TÜV SÜD HONG KONG LTD. issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval. Report Number: 60.960.15.139.01R01 EMC_SZ_FR_22.00 FCC Release 2014-03-20 TÜV SÜD HONG KONG LTD. 3/F, West Wing, Lakeside 2, 10 Science Park W est Avenue, Science Park, Shatin, HK. Tel: +852-2776 1323 Fax: +852-2776 1206 Page 2 of 50 1 Table of Contents 1 Table of Contents ............................................................................................................ 2 2 Description of Equipment Under Test ............................................................................. 3 3 Summary of Test Standards ........................................................................................... 4 4 Details about the Test Laboratory ................................................................................... 5 4.1 Test Equipment Site List ................................................................................................... 6 4.2 Measurement System Uncertainty .................................................................................... 7 5 Summary of Test Results ................................................................................................ 8 6 General Remarks ............................................................................................................ 9 7 Emission Test Results .................................................................................................. 10 7.1 Spurious Radiated Emission ........................................................................................... 10 7.2 6dB & 99% Bandwidth .................................................................................................... 16 7.3 Peak Output Power ......................................................................................................... 22 7.4 Spurious Emissions at Antenna Terminals ...................................................................... 25 7.5 100kHz Bandwidth of band edges................................................................................... 28 7.6 Power Spectral Density ................................................................................................... 32 7.7 Antenna Requirement ..................................................................................................... 35 8 Appendix A - Photographs of EUT ................................................................................ 36 9 Appendix B - Setup Photographs of EUT ...................................................................... 49 10 Appendix C - General Product Information ................................................................. 50 Report Number: 60.960.15.139.01R01 EMC_SZ_FR_22.00 FCC Release 2014-03-20 TÜV SÜD HONG KONG LTD. 3/F, West Wing, Lakeside 2, 10 Science Park W est Avenue, Science Park, Shatin, HK. Tel: +852-2776 1323 Fax: +852-2776 1206 Page 3 of 50 2 Description of Equipment Under Test Description of the Equipment Under Test Product:BLE SMART WATCH Model no.:HSTNW -D02W FCC ID:O4GTITAN Rating: 1) For Bluetooth module: 3.6VDC (1 x 3.6VDC rechargeable button cell battery, Model: LIR2025) 2) For watch: 1.5VDC (1 x 1.5VDC button cell battery, Model:364) Frequency:2402MHz-2480MHz Antenna gain:0 dBi Number of operated channel: 40 Modulation:GFSK Report Number: 60.960.15.139.01R01 EMC_SZ_FR_22.00 FCC Release 2014-03-20 TÜV SÜD HONG KONG LTD. 3/F, West Wing, Lakeside 2, 10 Science Park W est Avenue, Science Park, Shatin, HK. Tel: +852-2776 1323 Fax: +852-2776 1206 Page 4 of 50 3 Summary of Test Standards Test Standards FCC Part 15 Subpart C 10-1-13 Edition Federal Communications Commission, PART 15 — Radio Frequency Devices, Subpart C — Unintentional Radiators Report Number: 60.960.15.139.01R01 EMC_SZ_FR_22.00 FCC Release 2014-03-20 TÜV SÜD HONG KONG LTD. 3/F, West Wing, Lakeside 2, 10 Science Park W est Avenue, Science Park, Shatin, HK. Tel: +852-2776 1323 Fax: +852-2776 1206 Page 5 of 50 4 Details about the Test Laboratory Site 1 Company name:TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Lakeside 2, 10 Science Park West Avenue, Science Park, Shatin, Hong Kong Site 2 Company name:TÜV SÜD China Ltd. Building 12&13 Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Shenzhen 518052, P.R.China FCC Registration Number: 502708 EmissionTests Test ItemTest Site FCC Par…

Text truncated - open the document above for the full version.

Appendix A Date: 2015-10-15 Report Number: 60.960.15.139.01 / 60.960.15.140.01 Model No.: HSTNW-D02W Page 1 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong Appendix A Date: 2015-10-15 Report Number: 60.790.15.139.01 / 60.790.15.140.01 Model No.: HSTNW-D02W Page 2 of 2 TÜV SÜD Hong Kong Ltd. 3/F, West Wing, Phase 2, 10 Science Park West Avenue, Hong Kong Science Park, Shatin, Hong Kong