
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the userβs authority to operate the equipment. Radiation Exposure Statement This device complies with RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Specific Absorption Rate (SAR) certification information The device conforms to U.S. Federal Communications Commission (FCC) standards that limit human exposure to radio frequency (RF) energy emitted by radio and telecommunications equipment. These standards prevent the sale of mobile devices that exceed a maximum exposure level (known as the Specific Absorption Rate, or SAR) of 1.60W/kg. SAR information on this and other model devices can be accessed online on the FCCβs website through transition.fcc.gov/oet/rfsafety/sar.html. In normal use, the actual SAR is likely to be much lower, as the device has been designed to emit only the RF energy necessary to transmit a signal to the nearest base station. By automatically emitting lower levels when possible, your device reduces your overall exposure to RF energy. The FCC has granted an Equipment Authorization for this model device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. This device has a FCC ID:O55104320 and the specific SAR levels for this device can be found at the following FCC website : www.fcc.gov/oet/ea/. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.
FCC ID: O55104320 FCC ID: O55104320 FCC ID: O55104320
FCC ID: O55104320 10.1 inch 4G Tablet Model: T10L FCC ID: O55104320 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: O55104320 GSM/WCDMA/LTE Main antenna LTE Diversity antenna WIFI/BT antenna FCC ID: O55104320
` Report No.: 18220WC00157201 FCC ID:O55104320 Page 1 of 150 FCC SAR TEST REPORT For SWAGTEK 10.1 inch 4G Tablet Prepared For : SWAGTEK Address : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Prepared By : Shenzhen Anbotek Compliance Laboratory Limited Address : 1/F., Building1, SEC Industrial Park, No.0409 Qianhai Road, Nanshan District, Shenzhen, Guangdong, China Tel:(86)755-26066440 Fax:(86)755-26014772 Report Number : SZAWW191017009-01 Date of Test : Dec.14, 2020 ~ Dec.18,2020 Date of Report : Dec.21,2020 Model No.: T10L, Stream 10, NT10 FCC ID: O55104320 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 2 of 150 Contents 1. Statement of Compliance ................................................................................................... 6 2. General Information .......................................................................................................... 7 2.1 Client Information ............................................................................................................................................... 7 2.2 Testing Laboratory Information ............................................................................................................................ 7 2.3 Description of Equipment Under Test(EUT) .......................................................................................................... 7 2.4 Device Category and SAR Limits ......................................................................................................................... 9 2.5 Applied Standard .............................................................................................................................................. 10 2.6 Environment of Test Site .................................................................................................................................... 10 2.7 Test Configuration ............................................................................................................................................. 10 3. Specific Absorption Rate (SAR) ....................................................................................... 11 3.1 Introduction ....................................................................................................................................................... 11 3.2 SAR Definition .................................................................................................................................................. 11 4. SAR Measurement System .............................................................................................. 12 4.1 E-Field Probe ................................................................................................................................................... 13 4.2 Data Acquisition Electronics (DAE) .................................................................................................................... 13 4.3 Robot ............................................................................................................................................................... 14 4.4 Measurement Server .......................................................................................................................................... 14 4.5 Phantom ........................................................................................................................................................... 15 4.6 Device Holder................................................................................................................................................... 16 4.7 Data Storage and Evaluation .............................................................................................................................. 17 5. Test Equipment List ........................................................................................................ 19 6. Tissue Simulating Liquids ............................................................................................... 20 7. System Verification Procedures ........................................................................................ 23 8. EUT Testing Position ...................................................................................................... 25 8.1. Define two imaginary lines on the handset ........................................................................................................... 25 8.2. Position for Cheek/Touch ................................................................................................................................... 26 8.3. Position for Ear / 15Β°Tilt .................................................................................................................................... 26 8.4. Body Worn Position .......................................................................................................................................... 27 9. Measurement Procedures ................................................................................................. 28 9.1 Spatial Peak SAR Evaluation ............................................................................................................................. 28 9.2 Power Reference Measurement ........................................................................................................................... 29 9.3 Area & Zoom Scan Procedures ........................................................................................................................... 29 9.4 Zoom Scan Procedures ...................................................................................................................................... 29 9.5 Volume Scan Procedures .................................................................................................................................... 30 9.6 Power Drift Monitoring ......................................................β¦
Text truncated - open the document above for the full version.
` Report No.: 18220WC00157201 FCC ID:O55104320 Page 112 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 113 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 114 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 115 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 116 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 117 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 118 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 119 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 120 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 121 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 122 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 123 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 124 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 125 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 126 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 127 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 128 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 129 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 130 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 131 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 132 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 133 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 134 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 135 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 136 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 137 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 138 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 139 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 140 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 141 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 142 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 143 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 144 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 145 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 146 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 147 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 148 of 150 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 149 of 150 Appendix E. Extended Calibration SAR Dipole Referring to KDB865664 D01, if dipoles are verified in return loss (<-20dBm, within 20% of prior calibration), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of Extended Calibration SAR Dipole D750V3β serial no.1163 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2019-09-03 -26.9 / 50.5 / -4.53 / 2020-09-01 -25.8 4.1 51.2 0.7 -4.29 0.24 Justification of Extended Calibration SAR Dipole D835V2β serial no.4d154 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2018-06-16 -29.8 / 49.2 / -3.11 / 2019-06-20 -28.9 3.02 48.4 0.8 -3.00 0.11 2020-06-18 -27.5 7.7 47.1 -2.1 -2.83 0.28 Justification of Extended Calibration SAR Dipole D1750V2β serial no.1021 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2019-07-03 -33.9 / 48.6 / -1.40 / 2020-07-01 -31.8 6.2 50.9 2.3 -1.25 0.15 Justification of Extended Calibration SAR Dipole D1900V2β serial no.5d175 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2019-06-15 -24.3 / 53.2 / 5.44 / 2020-06-18 -23.8 2.1 52.7 -0.5 5.63 0.19 ` Report No.: 18220WC00157201 FCC ID:O55104320 Page 150 of 150 Justification of Extended Calibration SAR Dipole D2450V2β serial no.910 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2018-06-15 -25.8 / 54.6 / 2.77 / 2019-06-20 -25.1 2.71 53.5 1.1 2.91 0.14 2020-06-18 -24.6 4.7 51.9 -2.7 3.04 0.27 Justification of Extended Calibration SAR Dipole D2600V2β serial no.1058 Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (johm) Delta (johm) 2019-06-20 -24.0 / 50.5 / -6.30 / 2020-06-18 -23.2 3.33 48.8 1.7 -6.16 0.14 The Return-Loss is <-20dB, and within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the value result should support extended cabration. *****END OF REPORT*****
Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China TEST REPORT FCC Part 22 Subpart H / Part 24 Subpart E Report Reference No. .....................: FCC ID. .............................................: GTS20201218008-1-1 O55104320 Compiled by ( position+printed name+signature) . : File administrators Jimmy Wang Supervised by ( position+printed name+signature) . : Test Engineer Aaron Tan Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue ..................................... : Dec.19, 2020 Testing Laboratory Name .............. : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China ............................ : SWAGTEK Address ............................................ : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Test specification ........................... : Standard ........................................... : FCC CFR Title 47 Part 2, Part 22H, Part 24E ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd.takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ......................: 10.1 inch 4G Tablet Trade Mark ....................................... : LOGIC, iSWAG, UNONU Manufacturer ................................... : SWAGTEK Model/Type reference ....................... : T10L Listed Models .................................. : Stream 10, NT10 Ratings ............................................. : DC 3.8V from battery Modulation ....................................... : GMSK, 8PSK, QPSK Hardware version ............................. : SF960C-G-MB-V1.0 Software version .............................. : LOGIC_T10L_TIGO_18092020 Frequency .......................................... GSM850, PCS1900, UMTS Band II, UMTS Band V Result................................................ : PASS Report No.: GTS20201218008-1-1 Page 2 of 43 TEST REPORT Test Report No. : GTS20201218008-1-1 Dec.19, 2020 Date of issue Equipment under Test : 10.1 inch 4G Tablet Model /Type : T10L Listed Models : Stream 10, NT10 Applicant : SWAGTEK Address : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Manufacturer : SWAGTEK Address : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Test result Pass * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201218008-1-1 Page 3 of 43 Contents Report No.: GTS20201218008-1-1 Page 4 of 43 1 SUMMARY 1.1 TEST STANDARDS The tests were performed according to following standards: FCC Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Part 22 Subpart H: PRIVATE LAND MOBILE RADIO SERVICES. FCC Part 24 Subpart E: PUBLIC MOBILE SERVICES ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.10-2013 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz FCCKDB971168D01 Power Meas License Digital Systems Test Description Test Item Section in CFR 47 Result RF Output Power Part 2.1046 Part 22.913 (a)(2) Part 24.232 (c) Pass Peak-to-Average Ratio Part 24.232 (d) Pass 99% & -26 dB Occupied Bandwidth Part 2.1049 Part 22.917 Pass Spurious Emissions at Antenna Terminal Part 2.1051 Part 22.917 (a) Part 24.238 (a) Pass Field Strength of Spurious Radiation Part 2.1053 Part 22.917 (a) Part 24.238 (a) Pass Out of band emission, Band Edge Part 22.917 (a) Part 24.238 (a) Pass Frequency stability Part 2.1055 Part 22.355 Part 24.235 Pass Report No.: GTS20201218008-1-1 Page 5 of 43 1.2 Address of the test laboratory Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. 1.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC-Registration No.: 165725 Shenzhen Global Test Service Co.,Ltd EMC Laborns Commission. The acceptance letter from the FCC is maintained in our files. atory has been registered and fully described in a report filed with the (FCC) Federal Communicatio A2LA-Lab Cert. No.: 4758.01 Shenzhen Global Test Service Co.,Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. CNAS-Lab Code: L8169 Shenzhen Global Test Service Co.,Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories. Date of Registration: Dec. 11, 2015. Valid time is until Dec. 10, 2024β¦
Text truncated - open the document above for the full version.
Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China TEST REPORT FCC Part 27 Report Reference No. .....................: FCC ID. .............................................: GTS20201218008-1-2 O55104320 Compiled by ( position+printed name+signature) . : File administrators Jimmy Wang Supervised by ( position+printed name+signature) . : Test Engineer Aaron Tan Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue ..................................... : Dec.19, 2020 Testing Laboratory Name .............. : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104,Building 7 and 8,DCC Cultural and Creative Garden No.98,Pingxin North Road,Shangmugu,Pinghu Street, Longgang District,Shenzhen,Guangdong,China ............................ : SWAGTEK Address ............................................ : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Test specification ........................... : Standard ........................................... : FCC CFR Title 47 Part 2, Part 24E ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd.takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ......................: 10.1 inch 4G Tablet Trade Mark ....................................... : LOGIC, iSWAG, UNONU Manufacturer ................................... : SWAGTEK Model/Type reference ....................... : T10L Listed Models .................................. : Stream 10, NT10 Ratings ............................................. : DC 3.8V from battery Modulation ....................................... : QPSK, 16QAM Hardware version ............................. : SF960C-G-MB-V1.0 Software version .............................. : LOGIC_T10L_TIGO_18092020 Frequency .......................................... E-UTRA FDD Band 4, 5, 7, 12 Result................................................ : PASS Report No.: GTS20201218008-1-2 Page 2 of 66 TEST REPORT Test Report No. : GTS20201218008-1-2 Dec.19, 2020 Date of issue Equipment under Test : 10.1 inch 4G Tablet Model /Type : T10L Listed Models : Stream 10, NT10 Applicant : SWAGTEK Address : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Manufacturer : SWAGTEK Address : 10205 NW 19th St. STE101, Miami, Florida, United States, 33172 Test result Pass * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20201218008-1-2 Page 3 of 66 Contents Report No.: GTS20201218008-1-2 Page 4 of 66 1 SUMMARY 1.1 TEST STANDARDS The tests were performed according to following standards: FCC Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Part 27 : MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.26-2015: IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services FCCKDB971168D01 Power Meas License Digital Systems 1.2 Test Description Test Item Section in CFR 47 Result RF Output Power Part 2.1046 Part 27.50(d)(4) Pass Peak-to-Average Ratio Part 27.50(d)(4) Pass 99% & -26 dB Occupied Bandwidth Part 2.1049 Part 27.53(h) Pass Spurious Emissions at Antenna Terminal Part 2.1051 Part 27.53(h) Pass Field Strength of Spurious Radiation Part 2.1053 Part 27.53(h) Pass Out of band emission, Band Edge Part 2.1051 Part 27.53(h) Pass Frequency stability Part 2.1055 Part 27.54 Pass Report No.: GTS20201218008-1-2 Page 5 of 66 1.3 Address of the test laboratory Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. 1.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC-Registration No.: 165725 Shenzhen Global Test Service Co.,Ltd EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. A2LA-Lab Cert. No.: 4758.01 Shenzhen Global Test Service Co.,Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. CNAS-Lab Code: L8169 Shenzhen Global Test Service Co.,Ltd. has been assessed and proved to be in compliance with CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories. Date of Registration: Dec. 11, 2015. Valid time is until Dec. 10, 2024. 1.5 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipmenβ¦
Text truncated - open the document above for the full version.
Report No.: GTS20201218008-1-2 Page 42 of 66 LTE FDD Band 4-1.4MHz Channel Bandwidth Middle Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 43 of 66 LTE FDD Band 4-1.4MHz Channel Bandwidth High Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 44 of 66 LTE FDD Band 4-3MHz Channel Bandwidth Low Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 45 of 66 LTE FDD Band 4-3MHz Channel Bandwidth Middle Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 46 of 66 LTE FDD Band 4-3MHz Channel Bandwidth High Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 47 of 66 LTE FDD Band 4-5MHz Channel Bandwidth Low Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 48 of 66 LTE FDD Band 4-5MHz Channel Bandwidth Middle Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 49 of 66 LTE FDD Band 4-5MHz Channel Bandwidth High Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 50 of 66 LTE FDD Band 4-10MHz Channel Bandwidth Low Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 51 of 66 LTE FDD Band 4-10MHz Channel Bandwidth Middle Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 52 of 66 LTE FDD Band 4-10MHz Channel Bandwidth High Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 53 of 66 LTE FDD Band 4-15MHz Channel Bandwidth Low Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 54 of 66 LTE FDD Band 4-15MHz Channel Bandwidth Middle Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 55 of 66 LTE FDD Band 4-15MHz Channel Bandwidth High Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 56 of 66 LTE FDD Band 4-20MHz Channel Bandwidth Low Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 57 of 66 LTE FDD Band 4-20MHz Channel Bandwidth Middle Channel QPSK 16QAM 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 LTE FDD Band 4-20MHz Channel Bandwidth High Channel QPSK 16QAM Report No.: GTS20201218008-1-2 Page 58 of 66 9KHz~150KHz 9KHz~150KHz 150KHz~30MHz 150KHz~30MHz 30MHz~26.5GHz 30MHz~26.5GHz 1RB#0 1RB#0 Report No.: GTS20201218008-1-2 Page 59 of 66 Radiated Measurement: Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE FDD Band 4; recorded worst cβ¦
Text truncated - open the document above for the full version.
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|---|---|---|---|---|
| 17 | 27 | 699 MHz - 716 MHz | 110.40 mW | 8M92W7D | 2.5 ppm |

Wireless Earbuds
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
Wireless Earbuds
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
4G MOBILE PHONE
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter
4G MOBILE PHONE
Equipment Class
JAB - Part 15 Class B Digital Device
4G TABLET
Equipment Class
PCB - PCS Licensed Transmitter