O551818232G flip phone

1 Thanks for selecting this mobile phone. For the best performance we recommend that you read the manual carefully. Contents Overview. ..............................................................................................2 1. Introduction .........................................................................................3 2. Function of main menu.............................................................................4 3. Maintenance and service............................................................................9 2  Overview Please read the following concise rules carefully. Nonobservance to the rules may lead to danger or violence of the laws. The user’s manual gives details about the safety precautions.  Emergency call Make sure the equipment is in the covered area of the network service and the calling f unction is activated. As per the specific requirements, press the key of finish to clear the screen and return to the standby state. Input the emergency call number （112）and press the call key.  Function Description The phone is a perfect combination of humanized design and exquisite workmanship, the streamline and ingenious body is comfortable to hold. With streamline and ingenious frame, it feels comfortable to hold the mobile phone in your hand. It supports TXT electronic book, Blue-tooth, dual SIM cards with one standby, network camera, camera, FM and etc，It makes your work more convenient and your free time more fun with the combination of keyboard, florid colored screen, pleasant bells, cartoon head portrait for incoming calls, strong file management function (supporting T-FLASH card), fashionable camera function and long time tape recording function, music player, video player. 3  Introduction Insert the SIM card and the battery Ask your SIM card dealer whether he has provided SIM card service and the method of usage who may be service provider or other dealers，SIM card and its contacts are vulnerable to scratch or bending. Attention shall be attached when use, insert or take out the card.  Inserting/taking out T-FLASH CARD Only use approved and compatible T-FLASH card applicable to the mobile phone. Approved memory card trade standard is applied; however, certain bands may not be completely compatible with the mobile phone. Using incompatible memory card may damage not only the card and the mobile, but also the data stored in the card.  Charging the battery Check the model number of the charger before using it to charge the mobile，Only use approved battery, charger and accessories applicable to the specific mobile model. Using other types of battery, charger and accessories may violate the certification or warranty terms of the equipment and may result in danger，Refer to the dealer for supply of relative approved accessories.  Startup and shutdown Press the key of power supply to start up or shut down the mobile phone，If it is prompted to input PIN or UPIN, please input the required password (shown as **** on the screen). 4 Function of main menu  Contacts Save the information of contacts , including names and telephone numbers in the contacts.  Message Write a message: You can choose to send the complete message from SIM card 1 or SIM card 2, You can choose multiple receivers to send the message to more than 1 person..  Call logs By telephone if you need to check you call logs>click select call logs menu>View: 1.All calls 2.SIM1/2 missed calls 3.SIM1/2 Dialed calls 4.SIM1/2 Received calls 5.SIM1/2 Rejected calls 6.Delete call logs 7.call timers.  Settings Phone settings 1.1.Date&Time :You can set the phone's time and date and the format. 1.2.Language Settings:You can select the phone’s display language . 1.3.Shortcut Settings:You can set the phone right soft keys and the navigation key shortcut functions. 1.4.Auto power on/off:After setting the time, and by that time the phone will auto power on/off. 1.5.Power management:Battery remains. 1.6.Restore factory settings:Enter the correct password of the phone will have to change your phone settings back to factory default state value, the user of the function be used with caution. (Default password: 1234). Display Settings 1.1.Animation effect:Set power on/off animation. 1.2.Wallpaper setting:Set wallpaper. 5 1.3.Idle display settings:You can choose to display or not display. 1.4.Brightness:The menu is to control of mobile phone screen brightness 1.5.Display backlight :The menu is to control of mobile phone display backlight time. 1.6.Keypad backlight :The menu is to control of mobile phone Keypad backlight time. Call settings This is some of the communications settings. There are have Dual-SM, Call divert, Call waiting, Call barring, Hide ID and others. Security PIN/PIN2:The SIM1/2 security setting need provided network operator .for more details, please contact your operator. Phone locked: You can switch on or off to activate the phone lock function to protect your phone. Modify the phone password:You can change password here. The default password is “0000”. Privacy:You can open the privacy protection function, set up mobile privacy. Auto keypad lock:You can set the on/off automatically lock screen mobile phone. Lock screen by end key:Set end key as dedicated key to lock the phone. Fixed dialing:You can set a fixed dialing. Connections Configure the network parameter in the place.  Multimedia  Camera In the options of camera, you may set the photometry mode, flash light，exposure compensation, avoidance of flickering, postponing shooting, white balance, photo quality, photo size, special effect, profile and etc. You may enter the album to check the formats that the cell phone supports. 6  Image viewer Check the pictures in the memorial card in formats supported by the cell phone.  Video Recorder phone provides video recording, select video footage that can enter the video recording. In the preview video press OK button to begin, press stop again, can have white balance, exposure compensati…

Text truncated - open the document above for the full version.

SWAGTEK Family models difference declaration 2G flip phone Model: LOGIC F11, Folder, U28 Difference declaration: All models are the same circuit and RF module, except the Model name. Regards, Signature Charles Cheng / Manager Date/City: 2023-05-23 / Miami Phone: 1-305 421 9938 Fax: 1-305 471 9011 E-mail: [email protected]

(SWAGTEK) (2023.05.23) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID:O55181823) [SWAGTEK] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Charles Cheng (SWAGTEK) (2023.05.23) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID:O55181823) [SWAGTEK] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Charles Cheng

SWAGTEK U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: 5/22/2023 Ref: Attestation Statement – Part2.911(d)(7) filing FCC ID: O55181823 SWAGTEK (“the applicant”) certifies that, as of the date of the filing of the application, SWAGTEK(“the agent”) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. SWAGTEK ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: SWAGTEK FRN: 0021846670 GC: O55 Address: 10205 NW 19th Street STE101 Miami, FL 33172,United States Signature: Contact Person: Charles Cheng Tel: +1-305 421 9938 Email: [email protected] Applicant Company Name: SWAGTEK Address: 10205 NW 19th Street STE101 Miami, FL 33172,United States Signature: Contact Person: Charles Cheng Tel: +1-305 421 9938 Email: [email protected]

SWAGTEK Agent Authorization Letter (2023-05-22) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li [email protected] to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Charles Cheng / Manager Date/City: 2023-05-23 / Miami Phone: 1-305 421 9938 Fax: 1-305 471 9011 E-mail: [email protected]

SWAGTEK Long Term Confidentiality Request Letter (2023-05-23) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: 2G flip phone Model No.: LOGIC F11, Folder, U28 FCC ID:O55181823 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the  Schematic Diagram  Block Diagram  Part List / BOM List / PCB Layout  Operational Description  Tune-up Procedure Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Charles Cheng / Manager Date/City: 2023-05-23 / Miami Phone: 1-305 421 9938 Fax: 1-305 471 9011 E-mail: [email protected]

SWAGTEK Short Term Confidentiality Request Letter (2023-05-23) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: 2G flip phone Model No.: LOGIC F11, Folder, U28 FCC ID:O55181823 To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, < SWAGTEK >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which < SWAGTEK > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < SWAGTEK > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Charles Cheng / Manager Date/City: 2023-05-23 / Miami Phone: 1-305 421 9938 Fax: 1-305 471 9011 E-mail: [email protected]

Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9

Photo 1 Photo 2 Photo 3 Photo 4 BT ANT GSM ANT Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11

Page 1 of 80 Report No.: STR230328003004E FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： 2G flip phone Brand Name： LOGIC, ISWAG, UNONU Model Name： LOGIC F11 Family Model： Folder, U28 Report No.： STR230328003004E FCC ID： O55181823 Prepared for SWAGTEK 10205 NW 19th Street STE101 Miami, FL 33172,United States Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel.: 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 80 Report No.: STR230328003004E TEST RESULT CERTIFICATION Applicant’s name ................. : SWAGTEK Address .................................. : 10205 NW 19th Street STE101 Miami, FL 33172,United States Manufacturer's Name .......... : SWAGTEK Address .................................. : 10205 NW 19th Street STE101 Miami, FL 33172,United States Product description Product name ........................ : 2G flip phone Trademark ............................ : LOGIC, ISWAG, UNONU Model Name ......................... : LOGIC F11 Family Model ......................... : Folder, U28 Standards ............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992; IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number T230328002R003 Date of Test Date (s) of performance of tests .............. : Apr. 03, 2023 ~ Apr. 04, 2023 Date of Issue ........................................... : May. 06, 2023 Test Result ............................................... : Pass Prepared By (Test Engineer) : (Jack Li) Approved By (Lab Manager) : (Alex Li) Page 3 of 80 Report No.: STR230328003004E ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release May. 06, 2023 Jack Li Page 4 of 80 Report No.: STR230328003004E TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 9 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E-Field Probe .......................................................................................... 12 2.3.1. E-Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 22 4.2. System Verification Procedure .............................................................. 23 4.2.1. System Verification Results .............................................................. 24 5. SAR Measurement variability and uncertainty .................................................. 25 5.1. SAR measurement variability ................................................................. 25 5.2. SAR measurement uncertainty .............................................................. 25 6. RF Exposure Positions ........................................................................................ 26 6.1. Ear and handset referen…

Text truncated - open the document above for the full version.

DRAWING NO: TITLE: COMPANY: DATED: DATED: DATED: CODE: SIZE: <Drawing Number> A1 <Code> <QC Date> <Checked Date> <QC By> <Checked By> A SCALE: RELEASED: DATED: QUALITY CONTROL: CHECKED: DRAWN: REV: 10 1 <Scale> <Revision> <Release Date> <Released By> SHEET: OF APPROVED: ECO NO: 1 REVISION RECORD LTR DATE: A B C D 6 5 4 3 2 D C B <Drawn By> <Drawn Date> Impedance be 50ohm RF SWITCH & GSM PA 26M EZFM 22PF R106 NC R3001 24K R9027 10K C3006 220pF C118 22uF C117 100pF C119 100nF L108 3.6nH C110 0.5pF/50V +/-0.1pF C0401 1 ANT1 R0406 27pF R0401 47PF C0419 NC C0420 NC C0418 NF C0470 NC C0412 27pF C0410 NC C0426 NC L0402 NC L0408 120nH C0400 22pF C0432 NC C0403 47pF C0433 NC C300 47nF L101 33nH L200 100nH L311 68nH 1 VCC 2 NC 3 RFIN 4 EN 5 GND 6 RFOUT U1 DS-AW5007 AW5007STR C400 47nF C511 47nF C0007 33pF(NF) 1 ANT2 C802 22pF L500 120nH 1 2 TP100 RF-TEST-PAD R141 NC 3 HB_TX 4 GND 5 LB_TX 2 GND 6 GND 8 GND 14 GND 22 GND 21 GND 23 ANT 20 GND 19 GND 15 HB_RX 17 LB_RX 18 RSVD 24 GND 25 GND 26 GND 27 GND 28 GND 29 GND 30 GND 1 GND 31 GND 16 RSVD 13 RSVD 7 VBATT 9 VLOGIC 12 BS 11 TXEN 10 VRAMP U3 M05_PA_HS8269L_LAN POWER IN GSM BT FM 26M & CLK BUFFER MT6261 RF M8 APC B9 BPI_BUS0 B8 BPI_BUS1 A9 BPI_BUS2 A3 XTAL1 A4 XTAL2 F2 FM_ANT_P D2 TX_HB C1 TX_LB B2 RXHB A1 RXLB B6 FREF A7 BT_LNA A2 AVSS_2GHF C2 AVSS_2GHF D1 AVSS_2GHF B4 AVSS_2GLF A6 AVSS_BT F1 AVSS_FM B7 AVSS_BT C8 AVDD15_BTRF D5 EXT_CLK_SEL U1000-C U / MT6261 R301 0R 2 1 4 3 X2101 XTAL_CC_320X250_H065_LAN23 C3016 1uF C3007 100pF C3008 100pF C3009 100pF L0401 NC BT_LNA [9] FM_ANT-P [1,7] FM_ANT-P [1,7] XTAL1 [1] XTAL2 [1] XTAL1 [1] XTAL2 [1] VIO28 APC_VBIAS [1] APC_VBIAS [1] BANDSW [1] TX_EN [1] BANDSW [1] TX_EN [1] TR_SW_EN [1] TR_SW_EN [1] RXLB_P [1] RXHB_P [1] TXO_HB [1] TXO_LB [1] RXLB_P [1] RXHB_P [1] TXO_HB [1] TXO_LB [1] EZFM_ANT [1] EZFM_ANT [1] VIO28 EZFM_EN [3] VBAT <Drawn Date> <Drawn By> B C 2 3 4 5 6 D C B A DATE: LTR REVISION RECORD 1 ECO NO: APPROVED: SHEET: OF <Released By> <Release Date> <Revision> <Scale> 2 10 REV: DRAWN: CHECKED: QUALITY CONTROL: DATED: RELEASED: SCALE: A <Checked By> <QC By> <Checked Date> <QC Date> <Code> A1 <Drawing Number> SIZE: CODE: DATED: DATED: DATED: COMPANY: TITLE: DRAWING NO: CHARGE Close to BAT CON 40mil 40mil CON_BAT C1014 close to BATSNS ball close bb connect to pin L2 connect to pin R7 1 MK203 NC-FIDUCIALMARK 1 MK202 NC-FIDUCIALMARK 1 MK201 NC-FIDUCIALMARK 1 MK200 NC-FIDUCIALMARK R6201 47K R0202 100nF R6202 1.5KR POWER IN VBAT IN AUDIO LED DRV PMU LDO CHARGER SIM SYS CTL MT6261 ABB Boost D8 VIO28 G2 PWRKEY K2 KPLED K3 ISINK G3 VBAT_VA P8 VCORE J14 VSF R13 VSIM1 M14 VSIM2 N11 VUSB D12 GND R10 VIBR E5 VRF G1 VREF P9 VRTC R16 VMC M1 SPK_OUTN N1 SPK_OUTP R4 AU_HSN R2 AU_HPL R3 AU_HSP R1 AU_HPR M7 AU_VIN0_P N7 AU_VIN0_N P6 AU_VIN1_P P7 AU_VIN1_N P12 SIM1_SCLK R12 SIM1_SRST N16 SIM2_SCLK M16 SIM2_SRST M13 SIM2_SIO C12 VDDK H2 CHR_LDO H3 BATSNS H4 ISENSE K1 DRV J2 BATON L7 AU_MICBIAS0 M4 VSBST R9 VBAT_DIGITAL L8 ACCDET J13 RESETB M12 VIO18 G4 VCAMA J1 VCDT N4 AVSS44_BOOST M2 AVSS_SPK N2 AVSS_SPK G6 AVSS44_ALDO P4 VSBST_OUT R7 AVSS28_ABB E12 GND E9 GND F10 GND G7 GND G9 GND G8 GND H8 GND H9 GND J9 GND K10 GND E2 AVSS44_ALDO J12 GND L2 AVSS44_PMU P2 AVDD_SPK M11 SIM1_SIO R5 VA L4 AVDD25_V2P5 M5 VSBST E13 GND P5 AVSS28_ABB N5 AVSS44_BOOST L10 AVSS44_DLDO U1000-B U / MT6261 R6100 0.2R R6101 1uF R6102 39KR R6103 330KR C6100 1uF R6105 3.3KR C1014 2.2uF 1 TP300 1 TP301 C6102 10uF D1001 C2506 1uF C2505 1uF C2514 1uF C2512 1uF C2500 2.2uF C2504 1uF C2507 1uF C2509 10nF C2511 1uF C2516 1uF C2517 1uF C2515 1uF C2510 1uF C3202 1uF C1001 1uF C1002 2.2uF R1006 1K R1008 10K 3 D 2 B 1 E 4 S 5 G 6 C 7 D Q1 MOSFET_CJMNT32 1 2 3 4 5 6 J301 BAT_BTY21-3K32041 C6101 100nF(NF) 1 2 3 D1002 TVS_PTVSHC3VN C201 1uF R202 1uF(NF) DRV [2] CHR_LDO [2] VCDT [2] VCHG VCDT [2] CHR_LDO [2] DRV [2] VBAT VBAT ISENSE [2] ISENSE [2] VBAT VBAT VCORE VCORE VIO18 VIO18 VIO28 VIO28 VSF VSF VRF VRF VREF VREF VRTC VRTC VA VCAMA VMC VUSB VIBR VSIM1 VSIM2 VA VCAMA VUSB ISINK0 [4] KPLED [8] RESETB PWRKEY [8] VIO18 SIM1_SRST [6] SIM1_SCLK [6] SIM1_SIO [6] SIM2_SRST [6] SIM2_SCLK [6] SIM2_SIO [6] VBAT VBAT VBAT MICBIAS0 MICN1 [7] MICP1 [7] ACCDET [7] MICP0 [7] MICN0 [7] HSP [4,7] HSN [4,7] HPR [7,9] HPL [7] SPK_OUTN [9] SPK_OUTP [9] BATON [2] BATON [2] DRAWING NO: TITLE: COMPANY: DATED: DATED: DATED: CODE: SIZE: <Drawing Number> A1 <Code> <QC Date> <Checked Date> <QC By> <Checked By> A SCALE: RELEASED: DATED: QUALITY CONTROL: CHECKED: DRAWN: REV: 10 3 <Scale> <Revision> <Release Date> <Released By> SHEET: OF APPROVED: ECO NO: 1 REVISION RECORD LTR DATE: A B C D 6 5 4 3 2 D C B <Drawn By> <Drawn Date> C323 0805·â×° ̧Ä0603 2013-1-12 LCM MSDC CAMERA KEY UART I2C Other interface USB ADC SYS_CTL MT6261 BB R15 MCCK N14 MCCM0 P15 MCDA0 J15 LSCE_B J16 LSRSTB K16 LSCK K15 LSDA L15 LSA0 M15 LPTE B12 CMPDN A12 CMRST C9 CMDAT1 A10 CMDAT0 B10 CMMCLK B11 CMPCLK C15 KROW3 B15 KROW2 A15 KROW1 A16 KROW0 C14 KCOL3 C13 KCOL2 A13 KCOL1 B13 KCOL0 D15 URXD1 D16 UTXD1 E15 GPIO_1 F15 GPIO_2 G16 GPIO_4 P10 USB11_DM P11 USB11_DP N8 AUXIN4 G15 GPIO_5 E8 SCL28 D9 SDA28 B3 EINT C16 KROW4 D14 KCOL4 E14 GPIO_0 F16 GPIO_3 H15 GPIO_6 H14 GPIO_7 H13 GPIO_8 H12 GPIO_9 D4 GPIO_10 B5 GPIO_11 N15 MCDA1 P13 MCDA2 N13 MCDA3 G5 TESTMODE C5 SRCLKENAI U1000-A U / MT6261 R1100 4.7KR R1104 4.7KR R9028 10K R1105 10K(NF) R1106 10K(NF) URXD1 [6] UTXD1 [6] USB_DM [6] USB_DP [6] SCL28 [4] SDA28 [4] EAR_EINT [7] KCOL0 [8] KCOL1 [8] KCOL2 [4,8] KROW0 [8] KROW1 [4,8] KROW2 [8] KROW3 [8] KROW4 [8] BACK_PDN [4] CMRST [4] CMDAT1 [4] CMDAT0 [4] CMMCLK [4] CMPCLK [4] FRONT_PDN [4] LSCE_B [4] LSRSTB [4] LSCK [4] LSDA [4] LSA0 [4] LPTE [4] MCCK [5] MCCM0 [5] MCDA0 [5] MCDA1 [5] MCDA2 [5] MCDA3 [5] VIO28 VIO18 HALL_INT [10] BACK_FLASH_EN [4] WHTLED_EN [4] AUDIO_PA_EN [9] EZFM_EN [1] KCOL3 [8] KCOL4 [8] LCM_CS1 [4] DRAWING NO: TITLE: COMPANY: DATED: DATED: DATED: CODE: SIZE: <Drawing Number> A1 <Code> <QC Date> <Checked Date> <QC By> <Checked By> A SCALE: RELEASED: DATED: QUALITY CONTROL: CHECKED: DRAWN: REV: 10 4 <…

Text truncated - open the document above for the full version.

Report No.: STR230328003002E 1 / 15 Conducted output power Band Channel Frequency (MHz) Power (dBm) Verdict GSM1900 512 1850.2 31.21 PASS GSM1900 661 1880 30.99 PASS GSM1900 810 1909.8 30.58 PASS GSM850 128 824.2 31.90 PASS GSM850 189 836.4 31.92 PASS GSM850 251 848.8 31.67 PASS Peak-to-Average Ratio Band Channel Frequency (MHz) Result (dB) high Limit (dB) Verdict GSM1900 512 1850.2 2.67 13 PASS GSM1900 661 1880 2.65 13 PASS GSM1900 810 1909.8 2.67 13 PASS GSM850 128 824.2 2.65 13 PASS GSM850 189 836.4 2.64 13 PASS GSM850 251 848.8 2.66 13 PASS GSM1900 Channel=512 GSM1900 Channel=810 Report No.: STR230328003002E 2 / 15 GSM1900 Channel=661 GSM850 Channel=128 Report No.: STR230328003002E 3 / 15 GSM850 Channel=189 GSM850 Channel=251 Report No.: STR230328003002E 4 / 15 Report No.: STR230328003002E 5 / 15 Occupied bandwidth Band Channel Frequency (MHz) 99% OBW (kHz) -26dB EBW (kHz) Verdict GSM1900 512 1850.2 252.755 310.939 PASS GSM1900 661 1880 247.482 308.165 PASS GSM1900 810 1909.8 250.679 315.276 PASS GSM850 128 824.2 245.562 313.550 PASS GSM850 189 836.4 252.427 318.433 PASS GSM850 251 848.8 239.305 310.896 PASS GSM1900 Channel=661 GSM1900 Channel=512 Report No.: STR230328003002E 6 / 15 GSM1900 Channel=810 GSM850 Channel=189 Report No.: STR230328003002E 7 / 15 GSM850 Channel=128 GSM850 Channel=251 Report No.: STR230328003002E 8 / 15 Report No.: STR230328003002E 9 / 15 Band edge Band Channel Frequency (MHz) Spur Freq (MHz) Spur Level (dBm) Limit (dBm) Verdict GSM1900 512 1850.2 1849.98 -29.20 -13 PASS GSM1900 810 1909.8 1910.02 -28.94 -13 PASS GSM850 128 824.2 823.98 -27.20 -13 PASS GSM850 251 848.8 849.02 -25.33 -13 PASS GSM1900 Channel=512 Report No.: STR230328003002E 10 / 15 GSM1900 Channel=810 GSM850 Channel=128 Report No.: STR230328003002E 11 / 15 GSM850 Channel=251 Report No.: STR230328003002E 12 / 15 Out-of-band emissions Band Channel Frequency (MHz) Spur Freq (MHz) Spur Level (dBm) Limit (dBm) Verdict GSM1900 512 1850.2 25950.09 -18.24 -13 PASS GSM1900 661 1880 26032.80 -18.29 -13 PASS GSM1900 810 1909.8 25944.13 -18.21 -13 PASS GSM850 128 824.2 26031.48 -20.97 -13 PASS GSM850 189 836.4 26238.61 -20.56 -13 PASS GSM850 251 848.8 25991.78 -20.40 -13 PASS GSM1900 Channel=512 Report No.: STR230328003002E 13 / 15 GSM1900 Channel=810 GSM1900 Channel=661 Report No.: STR230328003002E 14 / 15 GSM850 Channel=251 GSM850 Channel=189 Report No.: STR230328003002E 15 / 15 GSM850 Channel=128

Report No.: STR230328003002E Version.1.3 Page 1 of 29 FCC RADIO TEST REPORT FCC ID: O55181823 Product: 2G flip phone Trade Mark: LOGIC, ISWAG, UNONU Model No.: LOGIC F11 Family Model: Folder, U28 Report No.: STR230328003002E Issue Date: May 06, 2023 Prepared for SWAGTEK 10205 NW 19th Street STE101 Miami, FL 33172,United States Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District Shenzhen, Guangdong, China Tel:400-800-6106,0755-2320 0050 / 2320 0090 Website:http://www.ntek.org.cn Report No.: STR230328003002E Version.1.3 Page 2 of 29 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 12 7.1 FIELD STRENGTH OF SPURIOUS RADIATION ...................................................................................... 12 7.2 EFFECTIVE RADIATED POWER AND EFFECTIVE ISOTROPIC RADIATED POWER ........................ 16 7.3 CONDUCTED OUTPUT POWER ................................................................................................................ 20 7.4 FREQUENCY STABILITY ........................................................................................................................... 22 7.5 PEAK-TO-AVERAGE RATIO ............…

Text truncated - open the document above for the full version.