O55PROFILEMobile Phone

1 User Manual Profile Brand name ： iSWAG FCC ID:O55PROFILE Please read the following guidelines before using your new iSWAG Profile phone. Utmost compliance with the following is highly recommended for your safety. Non-compliance may pose danger to you and your mobile phone, and may be illegal. The iSWAG Profile is packed with features to satisf y your needs such as Phonebook, Music Player, Video Player, Digital Camera, among others. It is Wi-Fi and Bluetooth capable and also meets the GSM/GPRS technical criteria. It is certified by both local and international authorities. iSWAG reserves the right to modify technical specifications without prior notice. Some content in this manual, i.e. software, images, accessories and more, may vary from that in the actual device. Please refer to your unit for accuracy. This guide aims to help you get started on your new iSWAG phone. Aside from the last two parts of this guide i.e. Section 6 - Important Safety Precautions and Section 7 - Troubleshooting, you will find the following icons periodically present to help you make better use of your device. Æ - indicat e - presen t - show s 2 e s sequence of processes t s additional notes on a topic or alt e s further cautionar y measures e rnative options for a feature to prevent dama g e to y ou r r mobile phone 1. Getting Started Switch y our Mobile Phone To switch y our mobile ph o animation appears on the properly. To switch OFF, press and h o Tap Power Off Æ OK and t h Install / Remove the SIM C a Make sure to switch off th e batter y . To install / remove t h 1. Snap open t h 2. Carefull y ins down and in 3. Carefull y ret u 4. To remove, c : If the screen displa y s th a Install / Remove the MemoThe Memor y Card is a han d remove the memor y card, p e 1. Tap and hold 2. Snap open th e 3. Remove batt e 4. Carefull y inse proper ali g nm 3 ON / OFF o ne ON, press and hold the P o screen. Make sure the batter y i s o ld the Power Ke y until a window p o h e phone will shut down. a rd and Batter y e device and disconnect from cha h e SIM card and batter y , perform t h h e phone’s back cover and pull out ert the SIM card into the SIM car d proper ali g nment with the phone’s m u rn the batter y into its slot and put t c arefull y slide the card out of the sl o a t the SIM card is locked permane n r y Card dy mobile stora g e device that ex p e rform the followin g : the Power Ke y to shut off the mobi l e phone’s back cover. e r y . rt the Memor y Card into its slot, m a ent with the phone’s metal contact s o wer Ke y until an s char g ed inserted o ps up. r g er before installin g and removin h e followin g : the batter y . d slot, makin g sure that the card’ s m etal contacts. h e cover back on. o t. n tl y , please consult your network o p p ands the mobile phone’s stora g e l e phone. a ke sure that the card’s g old plate i s . g the SIM card and s g old plate is facin g p erator. capacit y . To install / s facin g down and in 5. Return batter y 6. To remove, c a : It is vital that y ou restar t Charge the Battery 1. Plu g the char g 2. Connect the s The batter y indicator icon wi stops flashin g , disconnect th : Do not for g et to unplu g : Only use i SWAG appr o : You can use the phone Off state, a char g in g indicat o Switch to Sleep Mode / W a The Sleep Mode suspends y also g oes into Sleep Mode b display settings. Lightly press Power Ke y to s Press the Power Key to Wa k To confi g ure sleep settin g s, g : Switchin g the Phone to S 4 y . a refull y slide the card out of the slo t t y our phone for it to identif y with th g er into the electrical outlet. m all end of the char g er connector i n ll flash until char g in g is finished. W e phone from the char g er. the charger from the electrical outl e o ved char g er and other accessorie s while char g in g , but char g in g time o r will appear on the screen. a ke Up y our device to a low power consu m by itself when the displa y automatic a s witch to Sleep Mode. k e Up / activate y our screen displa y g o to Settings Æ Display Æ Sle e S leep Mode is a wa y to lock y our p h t . e newl y inserted memor y card. n to the mobile phone’s char g in g sl o W hen char g in g is complete, i.e. the b e t after char g in g . s . ma y increase. When char g in g the m ption state in order to prolong bat t a ll y turns off after a certain period o y . e p Æ choose time h one. o t. b atter y char g in g icon handset in its Power t er y life. Your device o f time, depending on Screen Lock You can lock y our screen f o sleep. 1. Go to Setti n 2. Touch the t y You can choose amon g the s Slide provides no protection, Face Unlock lets y ou unlock Pattern lets you draw a si m Unlock. PIN requires four or more n u Password requires four or password. : A stron g password is u symbols. Unlock Your Phone Drag the icon to the ri gh : To set Screen Lock patt e Security Codes The mobile phone and the S any of the codes mentione d phone’s settin g s for these Æ Choose which card to l o 5 o r additional securit y . After y ou se ng s Æ Security Æ Screen lock. y pe of lock y ou want and follow the s e lock options: but lets y ou g et to the Home scree y our tablet b y lookin g at it. This is t m ple pattern with y our fin g er to un u mbers. Lon g er PINs tend to be mo more letters or numbers. This is t h u suall y ei g ht or more characters l o h t, dependin g on y our screen lock p e rn, g o to Menu Æ Settings Æ S e S IM card support several passwor d d below, t y pe in the correct code a codes, g o to Menu [ ] Æ Se t o ck Æ Lock SIM Card Æ enter SI M t a lock, the screen is locked afte r onscreen instructions. n quickl y . t he least secure lock option. lock the tablet. This is sli g htl y mo r re secure. h e most secure option, as long as o n g , and is composed of alphabu m p attern. e curit y Æ Screen Lock Æ choos e d s in order to prevent misuse. Wh e nd then confirm b y tappin g the O K t tin g s [ ] Æ Security Æ Set M PIN Æ OK r the displa y g oes to r e secur…

Text truncated - open the document above for the full version.

Dec. 16, 2013 Federal Communication Commission Authorization and Evaluation Division FCC ID: O55PROFILE Re: Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1: Block Diagram 2: Circuit Diagram 3: Operational Description 4: Parts List 5: Tune Up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rules 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, SWAGTEK Contact person: Charles Cheng Title: Manager

Ersteller: D. Brandhorst Revision: 00 Erstelldatum: 21.06.07 Datum: 00.00.00 Seite 1 von 1 Date: Dec.16, 2013 Subject: Ad Hoc Mode Function Declaration FCC ID: O55PROFILE To Whom it may concern, This device is acting as host device and operating in the 2.4 GHz (2412 – 2462 MHz) band. Ad Hoc function is supported but not able to operate on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, SWAGTEK Contact person: Charles Cheng Title: Manager

FCC ID Label Location Mobile Phone Model: Profile Trade Name: iSWAG FCC ID: O55PROFILE

External Photos TOTAL VIEW OF EUT TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT

FCC ID Label Location Mobile Phone Model: Profile Trade Name: iSWAG FCC ID: O55PROFILE

Internal Photos OPEN VIEW OF EUT-1 OPEN VIEW OF EUT-2 GSM & WCDMA Antenna BT&WIFI &GPS Antenna OPEN VIEW OF EUT-3 INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2

FCC ID APPLIC PRODU BRAND MODEL CLIENT DATE O STAND REPOR A CAUTIO This rep laborato CATION PUR UCT DESIGN D NAME L NAME T OF ISSUE DARD(S) RT VERSION Attestat ON: port shall n ory and sha SA Rep : RPOSE : NATION : : : : : : : tion of G ot be repro all not be qu R Te port No.: A O55PRO F Original E Mobile P h iSWAG Profile SWAGTEK Dec.09, 20 IEEE Std. 47CFR § 2 IEEE/ANS V1.0 Global C oduced exc uoted out o est AGC0006 FILE Equipment hone K 013 1528:2003 2.1093 SI C95.1 Complia ept in full w of context. Rep 68131106 ance(Sh without the Report port 6FH01 henzhen e written pe t No.:AGC00 t n) Co., L ermission o 0068131106 Page 1 o Ltd. of the test FH01 of 232 Report No.:AGC00068131106FH01 Page 2 of 232 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec.09, 2013 Valid Original Report The test plans were performed in accordance with IEEE Std. 1528:2003; 47CFR § 2.1093; IEEE/ANSI C95.1 and the following specific FCC Test Procedures: ·KDB 447498 D01 General RF Exposure Guidance v05r01 ·KDB 648474 D04 SAR Handsets Multi Xmiter and Ant v01 ·KDB 865664 D01 SAR measurement 100 MHz to 6 GHz v01 ·KDB 941225 D01 SAR test for 3G devices v02 ·KDB 941225 D02 Guidance for 3GPP R6 and R7 HSPA v02v01 ·KDB 941225 D03 SAR Test Reduction GSM GPRS EDGE v01 ·KDB 941225 D06 Hot Spot SAR v01 ·KDB 248227 D01 SAR meas for 802 11 a b g v01r02 Applica Applica Manufa Manufa Product Brand N Model N Differen EUT Vo Applica Te s t Da Perform Report T nt Name nt Address cturer Name cturer Addre t Designatio Name Name nt Descriptio oltage ble Standard ate med Location Template Tes : SW : 10 e : K ess : F l Pa n : M : iS : P on N/ : D d : I E 47 IE : D n A t 2 G A Teste Check e Authoriz st Rep WAGTEK 0205 NW 19 ingtech Tele loor 3, Build ark, Bantian Mobile Phone SWAG rofile /A C3.7V by ba EEE Std. 152 7CFR § 2.10 EEE/ANSI C ec.06, 2013 ttestation of F, Building 2 ushu, Xixian GCRT-US-3 d By ed By zed By port C 9th Street, S ecom (Shenz ing A, No.3, n Street, Lon e attery 28:2003 093 C95.1 3 fGlobal Com 2, No.1-No.4 ng Street, B 3G/SAR (20 Sun Y Angela Solger Z Certific STE 101, Mia zhen) Co., L , Road 1 of S nggang Distr mpliance(Sh 4, Chaxi San ao'an Distric 13-03-01) Yin a Li hang Report cation ami, FL3317 Ltd. Shangxue D rict, Shenzh enzhen) Co nwei Techni ct, Shenzhe Dec.09, 201 Dec.09, 201 Dec.09, 201 t No.:AGC00 n 72, USA Dengxinkeng en City, PRC o., Ltd. cal Industria n, China 13 13 13 0068131106 Page 3 o g Industry C al Park, FH01 of 232 Report No.:AGC00068131106FH01 Page 4 of 232 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................ 7 2.1. EUT DESCRIPTION ...................................................................................................................................... 7 2.2. TEST PROCEDURE ...................................................................................................................................... 9 2.3. TEST ENVIRONMENT .................................................................................................................................... 9 2.4. TEST CONFIGURATION AND SETTING ........................................................................................................... 10 3. SAR MEASUREMENT SYSTEM ................................................................................................................... 11 3.1. SPECIFIC ABSORPTION RAT E (SAR) ............................................................................................................ 11 3.2. SAR MEASUREMENT PROCEDURE ............................................................................................................. 12 3.3. COMOSAR SYSTEM DESCRIPTION ............................................................................................................ 13 3.4. COMOSAR E-FIELD PROBE ..................................................................................................................... 15 3.5. ISOTROPIC E-FIELD PROBE SPECIFICATION ................................................................................................. 15 3.6. ROBOT ..................................................................................................................................................... 15 3.7. VIDEO POSITIONING SYSTEM ..................................................................................................................... 16 3.8. DEVICE HOLDER ....................................................................................................................................... 16 3.9. SAM TWIN PHANTOM ................................................................................................................................ 17 4. TISSUE SIMULATING LIQUID ..................................................................................................................... 18 4.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID ................................................................................... 18 4.2. TISSUE CALIBRATION RESULT ..................................................................................................................... 19 4.3. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS .............................................................. 20 5. SAR MEASUREMENT PROCEDURE ......................................................................................................... 21 5.1. SAR SYSTEM VALIDATION PROCEDURES .................................................................................................... 21 5.2. SAR SYSTEM VALIDATION .......................................................................................................................... 22 6. EUT TEST POSITION ...............…

Text truncated - open the document above for the full version.

Report No.:AGC00068131106FH01 Page 127 of 232 Repeated SAR<1> Test Laboratory: AGC Lab Date: Dec.06, 2013 GSM 835 Mid- Body- Back <SIM 1> DUT: Mobile Phone; Type: Profile Communication System: Generic GSM; Communication System Band: GSM 835; Duty Cycle: 1:8.3; Conv.F=5.46; Frequency: 836.6 MHz; Medium parameters used: f = 835 MHz; σ= 0.94mho/m; εr = 53.88; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.0, Liquid temperature (°C): 21.0 SATIMO Configuration: Probe: EP165; Calibrated: 01/31/2013 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: Flat Phantom; Type: Elliptical Phantom • Measurement SW: OpenSAR V4_02_01 Configuration/GSM 835 Mid-Body-Back/Area Scan (6x8x1): Measurement grid: dx=8mm, dy=8mm Configuration/GSM 835 Mid-Body-Back/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm,Very fast Phantom Validation plane Device Position Body Back Band GSM 835 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=8.00 SAR 10g (W/Kg) 0.458131 SAR 1g (W/Kg) 0.720889 Report No.:AGC00068131106FH01 Page 128 of 232 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.7452 0.4608 0.3027 0.2203 3D screen shot Hot spot position Report No.:AGC00068131106FH01 Page 129 of 232 Test Laboratory: AGC Lab Date: Dec.06, 2013 PCS 1900 Mid-Body- Back <SIM 1> DUT: Mobile Phone; Type: Profile Communication System: Generic GSM; Communication System Band: PCS 1900; Duty Cycle: 1:8.3; Conv.F=4.84; Frequency: 1880 MHz; Medium parameters used: f = 1900 MHz; σ= 1.49 mho/m; εr =52.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.0, Liquid temperature (°C): 21.0 SATIMO Configuration: Probe: EP165; Calibrated: 01/31/2013 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: Flat Phantom; Type: Elliptical Phantom • Measurement SW: OpenSAR V4_02_01 Configuration/PCS1900 Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/PCS1900 Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5mm; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm,Very fast Phantom Validation plane Device Position Body Back Band PCS 1900 Channels Middle Signal TDMA (Crest factor: 8.0) SURFACE SAR VOLUME SAR Maximum location: X=8.00, Y=16.00 SAR 10g (W/Kg) 0.521553 SAR 1g (W/Kg) 0.734272 Report No.:AGC00068131106FH01 Page 130 of 232 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.8103 0.5969 0.4389 0.3221 3D screen shot Hot spot position Report No.:AGC00068131106FH01 Page 131 of 232 Test Laboratory: AGC Lab Date: Dec.06, 2013 WCDMA Band II Low-Body-Towards Grounds (RMC) DUT: Mobile Phone; Type: Profile Communication System: UMTS; Communication System Band: Band II UTRA/FDD ;Duty Cycle:1:1; ConvF=4.84 Frequency: 1852.4 MHz; Medium parameters used: f = 1900 MHz; σ=1.49 mho/m; εr =52.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C):21, Liquid temperature (°C):21 SATIMO Configuration: Probe: EP165; Calibrated: 01/31/2013 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: Flat Phantom; Type: Elliptical Phantom • Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA band II Low-Body-back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA band II Low-Body-back/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5m; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm,Very fast Phantom Validation plane Device Position Body Back Band WCDMA band II Channels Low Signal TDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-1.00, Y=-31.00 SAR 10g (W/Kg) 0.522942 SAR 1g (W/Kg) 0.820047 Report No.:AGC00068131106FH01 Page 132 of 232 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.7674 0.4744 0.3091 0.2207 3D screen shot Hot spot position Report No.:AGC00068131106FH01 Page 133 of 232 Test Laboratory: AGC Lab Date: Dec.06, 2013 WCDMA Band II Mid-Body-Towards Grounds (RMC) DUT: Mobile Phone; Type: Profile Communication System: UMTS; Communication System Band: Band II UTRA/FDD ;Duty Cycle:1:1; ConvF=4.84 Frequency: 1880 MHz; Medium parameters used: f = 1900 MHz; σ=1.49 mho/m; εr =52.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C):21, Liquid temperature (°C):21 SATIMO Configuration: Probe: EP165; Calibrated: 01/31/2013 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: Flat Phantom; Type: Elliptical Phantom • Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA band II Mid-Body-back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA band II Mid-Body-back/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5m; Area Scan surf_sam_plan.txt ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm,Very fast Phantom Validation plane Device Position Body Back Band WCDMA band II Channels Middle Signal TDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-2.00, Y=-5.00 SAR 10g (W/Kg) 0.678224 SAR 1g (W/Kg) 1.007893 Report No.:AGC00068131106FH01 Page 134 of 232 Z (mm) 0.00 4.00 9.00 14.00 19.00 SAR (W/Kg) 0.0000 0.9722 0.6632 0.4612 0.3307 3D screen shot Hot spot position Report No.:AGC00068131106FH01 Page 135 of 232 Test Laboratory: AGC Lab Date: Dec.06, 2013 WCDMA Band II High-Body-Towards Grounds (RMC) DUT: Mobile Phone; Type: Profile Communication System: UMTS; Communication System Band: Band II UTRA/FDD ;Duty Cycle:1:1; ConvF=4.84 Frequency: 1907.6 MHz; Medium parameters used: f = 1900 MHz; σ=1.49 mho/m; εr =52.68; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C):21, Liquid temperature (°C):21 SATIMO Configuration: Probe: EP165; Calibrated: 01/31/2013 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: Flat Phantom; Type: Elliptical Phantom • Measurement SW: OpenSAR V4_02_01 Configuration/ WCDMA band II High-Body-back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA band II High-Body-back/Zoom Scan: Measurement grid: dx=8mm, dy=8mm, dz=5m; Area Scan s…

Text truncated - open the document above for the full version.

Report No.:AGC00068131106FH01 Page 183 of 232 APPENDIX C. TEST SETUP PHOTOGRAPHS &EUT PHOTOGRAPHS Test Setup Photographs LEFT-CHECK TOUCH LEFT-TILT 15 0 Report No.:AGC00068131106FH01 Page 184 of 232 RIGHT-CHECK TOUCH RIGHT-TILT 15 0 Report No.:AGC00068131106FH01 Page 185 of 232 Body Back 5mm Body Front 5mm 5mm Report No.:AGC00068131106FH01 Page 186 of 232 Body back with Headset Report No.:AGC00068131106FH01 Page 187 of 232 Body Back 10mm--Hotspot Body Front 10mm—Hotspot 10mm Report No.:AGC00068131106FH01 Page 188 of 232 DEPTH OF THE LIQUID IN THE PHANTOM—ZOOM IN Note：The position used in the measurement were according to IEEE 1528-2003 Report No.:AGC00068131106FH01 Page 189 of 232 EUT PHOTOGRAPHS TOTAL VIEW OF EUT Report No.:AGC00068131106FH01 Page 190 of 232 TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.:AGC00068131106FH01 Page 191 of 232 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.:AGC00068131106FH01 Page 192 of 232 LEFT VIEW OF EUT RIGHT VIEW OF EUT Report No.:AGC00068131106FH01 Page 193 of 232 OPEN VIEW OF EUT-1 OPEN VIEW OF EUT-2 GSM & WCDMA Antenna BT&WIFI &GPS Antenna Report No.:AGC00068131106FH01 Page 194 of 232 OPEN VIEW OF EUT-3 INTERNAL VIEW OF EUT-1 Report No.:AGC00068131106FH01 Page 195 of 232 INTERNAL VIEW OF EUT-2

Report No.:AGC00068131106FH01 Page 196 of 232 APPENDIX D. PROBE CALIBRATION DATA Report No.:AGC00068131106FH01 Page 197 of 232 Report No.:AGC00068131106FH01 Page 198 of 232 Report No.:AGC00068131106FH01 Page 199 of 232 Report No.:AGC00068131106FH01 Page 200 of 232 Report No.:AGC00068131106FH01 Page 201 of 232 Report No.:AGC00068131106FH01 Page 202 of 232 Report No.:AGC00068131106FH01 Page 203 of 232 Report No.:AGC00068131106FH01 Page 204 of 232 Report No.:AGC00068131106FH01 Page 205 of 232 Report No.:AGC00068131106FH01 Page 206 of 232 APPENDIX E. DIPOLE CALIBRATION DATA Report No.:AGC00068131106FH01 Page 207 of 232 Report No.:AGC00068131106FH01 Page 208 of 232 Report No.:AGC00068131106FH01 Page 209 of 232 Report No.:AGC00068131106FH01 Page 210 of 232 Report No.:AGC00068131106FH01 Page 211 of 232 Report No.:AGC00068131106FH01 Page 212 of 232 Report No.:AGC00068131106FH01 Page 213 of 232 Report No.:AGC00068131106FH01 Page 214 of 232 Report No.:AGC00068131106FH01 Page 215 of 232 Report No.:AGC00068131106FH01 Page 216 of 232 Report No.:AGC00068131106FH01 Page 217 of 232 Report No.:AGC00068131106FH01 Page 218 of 232 Report No.:AGC00068131106FH01 Page 219 of 232 Report No.:AGC00068131106FH01 Page 220 of 232 Report No.:AGC00068131106FH01 Page 221 of 232 Report No.:AGC00068131106FH01 Page 222 of 232 Report No.:AGC00068131106FH01 Page 223 of 232 Report No.:AGC00068131106FH01 Page 224 of 232 Report No.:AGC00068131106FH01 Page 225 of 232 Report No.:AGC00068131106FH01 Page 226 of 232 Report No.:AGC00068131106FH01 Page 227 of 232 Report No.:AGC00068131106FH01 Page 228 of 232 Report No.:AGC00068131106FH01 Page 229 of 232 Report No.:AGC00068131106FH01 Page 230 of 232 Report No.:AGC00068131106FH01 Page 231 of 232 Report No.:AGC00068131106FH01 Page 232 of 232

Report No.: AGC00068131105FE04 Page 1 of 72 Report No.: AGC00068131105FE04 FCC ID : O55PROFILE APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Mobile Phone BRAND NAME : iSWAG MODEL NAME : Profile CLIENT : SWAGTEK DATE OF ISSUE : Dec. 09, 2013 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. FCC Test Report Report No.: AGC00068131105FE04 Page 2 of 72 Report Revise Record Report Version Revise Time Issued Date Valid VersionNotes V1.0 / Dec. 09, 2013Valid Original Report Report No.: AGC00068131105FE04 Page 3 of 72 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ...................................................................................... 5 2. GENERAL INFORMATION .................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................... 6 2.2. TABLE OF CARRIER FREQUENCYS .......................................................................................... 6 2.3. IEEE 802.11N MODULATION SCHEME ...................................................................................... 7 2.4. RELATED SUBMITTAL(S) / GRANT (S) ....................................................................................... 7 2.5. TEST METHODOLOGY................................................................................................................ 7 2.6. SPECIAL ACCESSORIES ............................................................................................................ 7 2.7. EQUIPMENT MODIFICATIONS ................................................................................................... 7 3. MEASUREMENT UNCERTAINTY........................................................................................ 8 4. DESCRIPTION OF TEST MODES ........................................................................................ 8 5. SYSTEM TEST CONFIGURATION ...................................................................................... 9 5.1. CONFIGURATION OF EUT SYSTEM .......................................................................................... 9 5.2. EQUIPMENT USED IN EUT SYSTEM ......................................................................................... 9 5.3. SUMMARY OF TEST RESULTS .................................................................................................. 9 6. TEST FACILITY .................................................................................................................. 10 7. PEAK OUTPUT POWER .................................................................................................... 11 7.1. MEASUREMENT PROCEDURE ................................................................................................ 11 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................... 12 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................... 13 8. 6DB BANDWIDTH .............................................................................................................. 21 8.1. MEASUREMENT PROCEDURE ................................................................................................ 21 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................... 21 8.3. LIMITS AND MEASUREMENT RESULTS .................................................................................. 22 9. CONDUCTED SPURIOUS EMISSION ............................................................................... 30 9.1. MEASUREMENT PROCEDURE ................................................................................................ 30 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ....................................................... 30 9.3. MEASUREMENT EQUIPMENT USED ....................................................................................... 30 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................... 30 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY .............................. 33 10.1 MEASUREMENT PROCEDURE ............................................................................................... 33 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ...................................................... 33 10.3 MEASUREMENT EQUIPMENT USED ...................................................................................... 33 10.4 LIMITS AND MEASUREMENT RESULT ................................................................................... 33 Report No.: AGC00068131105FE04 Page 4 of 72 11. RADIATED EMISSION ..................................................................................................... 41 11.1. MEASUREMENT PROCEDURE .............................................................................................. 41 11.2. TEST SETUP ............................................................................................................................ 42 11.3. LIMITS AND MEASUREMENT RESULT .................................................................................. 43 11.4. TEST RESULT .......................................................................................................................... 43 12. BAND EDGE EMISSION .................................................................................................. 52 12.1. MEASUREMENT PROCEDURE .............................................................................................. 52 12.2. TEST SET-UP ................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC00068131105FE08 Page 1 of 50 FCC Test Report Report No.: AGC00068131105FE08 FCC ID : O55PROFILE APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Mobile Phone BRAND NAME : iSWAG MODEL NAME : Profile CLIENT : SWAGTEK DATE OF ISSUE : Dec. 09, 2013 STANDARD(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC00068131105FE08 Page 2 of 50 Report Revise Record Report Version Revise Time Issued Date Valid VersionNotes V1.0 / Dec. 09, 2013 Valid Original Report Report No.: AGC00068131105FE08 Page 3 of 50 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE......................................................................................................... 5 2.GENERAL INFORMATION ...................................................................................................................... 6 2.1PRODUCT DESCRIPTION ........................................…

Text truncated - open the document above for the full version.