O55T77025Wi-Fi Tablet

1 Logic T7-QUAD User Manual Statements, Disclosures and Precautions 4 Getting to Know Your Logic T7-QUAD Tablet 6 Switching Your Tablet On/Off 6 Touch Screen 7 Using a Micro SD Card 7 Getting Started 8 Charging Your Device 9 Desktop 11 Lock Screen 12 2 Installed Applications 12 Desktop Menu 13 Managing Applications 13 Clock 14 Installing Software Online 17 Browser 19 Calendar 17 Camera 18 Calculator 19 Sound Recorder 19 Email 19 File Manager 22 Wi-Fi 28 Music 23 Video Player 24 Settings 30 FAQ 331 Device Specifications 373 Battery management 384 Important safety instructions and certifications 404 Statements, disclosures and precautions Thank you for purchasing this innovative tablet from Logic. We invite you to read the instructions contained in this user manual so you can configure and utilize all the functions of your new tablet. For additional information you can visit us at: logicmobility.com Warnings and Precautions 3  Please do not disassemble; this is a highly precise electronic product.  Avoid any heavy impact or collision with this product  Avoid using this product in the following conditions: high or low temperatures, moist or dusty environments, strong magnetic fields, and/or long term exposure to sunlight.  If cleaning is necessary, only use a soft moist cotton cloth to wipe the outer shell of the product. Do not use any other chemical cleaning solutions.  Avoid placing this product near any liquids in case there is accidental spillage onto or into the product  Excess use of headphones at high volume may cause permanent hearing impairment.  Please only use permitted batteries, chargers, and accessories with this product; use of any other types will violate the warranty regulations and may be dangerous.  Please follow the relevant local environmental regulations to deal with obsolete products and accessories. 4  If the product becomes faulty at any point, Logic assumes no responsibility for any loss of data/music/video and/or any other files. Please follow the user manual for standard operation and timely backups. Statements and Disclosures  Specifications are subject to change without notice.  While the utmost care has been taken in producing this manual neither Logic, nor any other affiliated company, assume responsibility for any mistakes or errors contained in this document.  Screen captures presented in this manual are for reference purposes, actual screens may vary.  Logic and the Logic logo are registered trademarks of Logic. Other trademarks are the property of their respective owners.  Always remember to back-up important data; we assume no responsibility for any errors with this product  Please read the operating instructions carefully. Use the accessories supplied with the product to avoid any 5 unexpected damage. Warranty cannot be honored if the product is used with incompatible accessories.  Although the latest version of Android available at the time of the products manufacturing is compatible with tablet specifications, Logic assumes no responsibility for the performance of the Android software supplied by Google and/or any errors/software bugs/software failures.  There may be slight discrepancies between pictures/data in this manual and the actual product. The actual product is accurate.  We cannot be responsible for any act of downloading illegal software and/or anything else that is considered illegal.  Logic cannot support the Android Operating System or offer any support for any Android based software that the user may download, install, and/or purchase. Getting to Know Your Logic T7-QUAD 6 Switching Your Tablet On/Off To switch on: press and hold the power switch for 3 seconds and wait for startup. To switch off: press and hold the power switch for 3 seconds → click Power off → click OK. Lock/unlock screen: briefly press the power switch to lock/unlock the screen. Forced shout down: if the device is not responding, press and hold the power switch for 7 seconds to force a shut-down. 7 Warning: a forced shut-down may cause unexpected errors in the system Touch Screen The touch screen is easy and convenient to use. You can use the touch screen in the following methods: Single click: briefly tap the screen with your finger. Click and hold: click the screen with your finger and hold for about 2 seconds. Drag: click a certain icon on the screen and hold, then move your finger, the icon will move accordingly. To avoid damaging the screen, never put anything on it. Using a Micro SD Card Your device supports up to a 32GB storage card. Locate the slot labeled T-Flash on your tablet to access the Micro SD slot. 8 Insert the card into the card slot, and push it in with your finger until a “click” is heard. Now the card is ready for use. Removing Micro SD card First, close all programs or files on the card. Click Settings → Storage → Remove SD card → OK. Then press the card with your finger, and simply remove it when it is ejected. Avoid inserting and removing the card repeatedly in a short time, this may cause damage to the card. We suggest you use name brand cards to ensure compatibility. Getting Started Reminder icons These reminder icons appear in the information bar along the top of the screen to provide information as to the status of your tablet. New email Airplane Mode on USB connected USB connected Return button Downloading Display Home button Charge Wi-Fi connected 9 Buttons: Descriptions and Functions Power button Long press: turn on/shut down Short press: sleep/wake up Volume +（up） Increase the volume Volume -（down） Decrease the volume HOME button Click from any screen to return to the main screen Back button Click from any screen to return to the previous screen Setting button Click to display the menu interface Menu button Display recently browsed history Charging the device The device is equipped with a built-in battery which must be charged before using for the first time. It is recommended to charge the battery for minimum of 10 ho…

Text truncated - open the document above for the full version.

SWAGTEK 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Date: 2015-11-5 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID:O55T77025 To Whom It May Concern: This letter is to ascertain that SWAGTEK Product Wi-Fi Tablet has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely, Client’s signature : Client’s name / title : Charles Cheng/ Manager Contact information / address: 10205 NW 19th Street, STE101, Miami, FL, 33172, USA

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 5.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (current) 4.0 5.0 Sept 16 2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 5.0 SWAGTEK 2015-10-30 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ SWAGTEK _____hereby authorize SIEMIC, Inc. to act as a Certification Body for certifying for the following project(s): (Wi-Fi Tablet, model number: T7, iSWAG Allure Plus, UNONU U7007 FCC ID:O55T77025 Sincerely, Client’s signature : Client’s name / title : Charles Cheng/ Manager Contact information / address: 10205 NW 19th Street, STE101, Miami, FL, 33172, USA

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (current) 3.0 4.0 March-26-2015 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 4.0 SWAGTEK (2015-10-30) To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID:O55T77025 We hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature : Client’s name / title : Charles Cheng/ Manager Contact information / address: 10205 NW 19th Street, STE101, Miami, FL, 33172, USA

SWAGTEK 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Statement We, SWAGTEK Product: Wi-Fi Tablet FCC ID: O55T77025 Model: T7, iSWAG Allure Plus, UNONU U7007 are all identical in interior structure, electrical circuits and components, and just model name, colors is different for the marketing requirement. Your assistance on this matter is highly appreciated. Yours sincerely, Client’s signature : Client’s name / title : Charles Cheng/ Manager Contact information / address: 10205 NW 19th Street, STE101, Miami, FL, 33172, USA

SWAGTEK WIFI Channel 12 & 13 Declaration Letter To whom it may concern: We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID:O55T77025 Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. Others Pls explain detail here. Company Name: SWAGTEK Address : 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Name / Title : Charles Cheng / Manager Signature : Phone : 305 459 9908 Email : [email protected] Date :2015-10-30

SWAGTEK ______________________________________________________ Statement We Hereby that The product Wi-Fi Tablet, models no. T7, iSWAG Allure Plus, UNONU U7007. When we design the main board, due to the different client’s need, we made compatibility. Different functions achieved by the module pasted on the main board. When paste module 8098, it only support WIFI, when paste module 8703, support WIFI and Bluetooth. This product use module 8089, only support WIFI. You can see it in the schematic. Your assistance on this matter is highly appreciated. Yours sincerely, Client’s signature : Client’s name / title : Charles Cheng/ Manager Contact information / address: 10205 NW 19th Street, STE101, Miami, FL, 33172, USA

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 4 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 4 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 4 Fig.5 Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 4 Fig.7

FCC ID: O55T77025

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 3 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 Wifi Antenna SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 3 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 3 Fig.5

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: O55T77025 Report No.: LCS1510231222E ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 FCC RF Exposure Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Portable Device Refer Standard: KDB 447498 D01 General RF Exposure Guidance v06 FCC Part 2 §2.1093 Evaluation method According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations:“ Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)+ · *√f (GHz)+ ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: O55T77025 Report No.: LCS1510231222E ___________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 Conducted Power Results Mode Channel Frequency (MHz) Conducted Output Power (dBm, Average) Tolerance ±(dB) 802.11b 01 2412 8.37 8.2 ± 0.5 06 2437 8.51 8.2 ± 0.5 11 2462 8.34 8.2 ± 0.5 802.11g 01 2412 7.61 7.5 ± 0.5 06 2437 7.26 7.5 ± 0.5 11 2462 7.15 7.5 ± 0.5 802.11n HT20 01 2412 6.45 6.5 ± 0.5 06 2437 6.43 6.5 ± 0.5 11 2462 6.56 6.5 ± 0.5 802.11n HT40 03 2422 6.34 6.5 ± 0.5 06 2437 6.06 6.5 ± 0.5 09 2452 6.47 6.5 ± 0.5 Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW 802.11b 2.412 5 8.7 7.41 2.30<3.0 Yes 2.437 5 8.7 7.41 2.31<3.0 Yes 2.462 5 8.7 7.41 2.32<3.0 Yes 802.11g 2.412 5 8.0 6.31 1.96<3.0 Yes 2.437 5 8.0 6.31 1.97<3.0 Yes 2.462 5 8.0 6.31 1.98<3.0 Yes 802.11n HT20 2.412 5 7.0 5.01 1.56<3.0 Yes 2.437 5 7.0 5.01 1.56<3.0 Yes 2.462 5 7.0 5.01 1.56<3.0 Yes 802.11n HT40 2.422 5 7.0 5.01 1.56<3.0 Yes 2.437 5 7.0 5.01 1.56<3.0 Yes 2.452 5 7.0 5.01 1.56<3.0 Yes Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. ----------------THE END OF REPORT---------------

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 59 FCC TEST REPORT For SWAGTEK Wi-Fi Tablet Model No.: T7 Additionnal Model No.: iSWAG Allure Plus, UNONU U7007 Prepared for : SWAGTEK Address : 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : October 23, 2015 Number of tested samples : 1 Date of Test : October 23, 2015- October 29, 2015 Date of Report : October 29, 2015 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 59 FCC TEST REPORT FCC CFR 47 PART 15 C(15.247): 2014 Report Reference No. ............... : LCS1510231222E Date of Issue ................................. : October 29, 2015 Testing Laboratory Name ......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1/F., Xingyuan Industrial Park, Tongda Road, Bao'an Avenue, Bao'an District, Shenzhen, Guangdong, China Testing Location/ Procedure ........ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : SWAGTEK Address ......................................... : 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Test Specification Standard ........................................ : FCC CFR 47 PART 15 C(15.247): 2014 Test Report Form No. ................ : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF .................................. : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : Wi-Fi Tablet Trade Mark ................................... : LOGIC Model/ Type reference ................. : T7 Ratings .......................................... : DC 3.7V by battery (2600mAh) Adapter:Input AC 100-240V 50/60Hz ,0.35A Output DC 5V/2A Result .......................................... : Positive Compiled by: Supervised by: Approved by: Dick Su / File administrators Glin Lu / Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 59 FCC -- TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS1510231222E October 29, 2015 Date of issue Type / Model........................... : T7 EUT......................................... : Wi-Fi Tablet Applicant............................... : SWAGTEK Address.................................. : 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Telephone............................... : / Fax.......................................... : / Manufacturer........................ : SWAGTEK Address................................... : 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Telephone............................... : / Fax.......................................... : / Factory................................... : SWAGTEK Address................................... : 10205 NW 19th Street, STE101, Miami, FL, 33172, USA Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 59 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................................................. 5 1.1. DESCRIPTION OF DEVICE (EUT) ........................................................................................................................... 5 1.2. SUPPORT EQUIPMENT LIST .................................................................................................................................... 5 1.3. EXTERNAL I/O CABLE .......................................................................................................................................... 5 1.4. DESCRIPTION OF TEST FACILITY ........................................................................................................................... 6 1.5. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................ 6 1.6. MEASUREMENT UNCERTAINTY ............................................................................................................................ 6 1.7. DESCRIPTION OF TEST MODES ............................................................................................................................. 7 2. TEST METHODOL…

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement (X Position) Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:O55T77025 Report No.: LCS1510231222E _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 1.2. Photo of Line Conducted Emissions