O55XL442A4 inch Smart Phone

1 XL4 user manual 2 Table of Contents Safety Information ....................................................................................................3 Appearance and Key Function..............................................................................5 Introduction ................................................................................................................6 Call Functions ...........................................................................................................8 Contacts ....................................................................................................................10 Messaging ................................................................................................................13 Internet Browser .....................................................................................................14 Bluetooth ..................................................................................................................16 Camera ......................................................................................................................17 Gallery .......................................................................................................................19 Music..........................................................................................................................20 3 Sound Recorder ......................................................................................................22 Alarm Clock ..............................................................................................................23 FM Radio ...................................................................................................................24 Settings .....................................................................................................................27 Storage ......................................................................................................................31 Safety Information Please carefully read the terms below: Use Safely Do not use your mobile phone where it might cause danger. Transportation Safety Please observe all transportation laws and regulations. Please drive with both hands on the wheel. DO NOT TEXT AND DRIVE Hospitals Please follow limitations. 4 Please turn off your mobile phone when near medical instruments. Airports Please follow all flight safety regulations and do not use your phone during flight. Toxic Chemicals Do not use your mobile phone around fuels or chemicals. Explosion Hazard Please observe related limitations and do not use your mobile phone around an area where explosions may occur. Accessories and Batteries Please use only Blu authorized acc ess ories and batteries. Backup Please remember to keep a written record of all important information. Water Your phone is not waterproof. Keep it away from water and liquids. SOS Emergency Calls Make sure your mobile phone is switched on and in a service area. In home screen, tap the phone key and dial 911 and send. 5 Appearance and Key Function Volu me Power Back Home Menu Front Camera 6 Introduction Installation of the SIM Card Please install the SIM card before using your phone. Rear Camera Flash Speaker 7 Note: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please be cautious when carrying, installing or taking out the SIM card. To insert SIM card(s): 1. Switch off the mobile phone and remove the rear cover. 2. Insert the SIM card(s) 3. Replace the rear cover of the mobile phone and power on. Power On and Off On - Please ensure the SIM card has been properly inserted into the phone. Long press the Power key to switch on the phone on. Off - In standby mode, long press on Power key until an options menu appears. Select OFF in the SIM Slot(s) 8 menu and confirm Password Lock You may set a screen unlock picture or a PIN code lock as a security measure. For further information regarding password locks, password revision and other functions please enter the security settings of the phone. Call Functions At the dial keyboard, enter the phone number and then click the dial key. You may choose which SIM card the call will be placed on. If dialing an extension, you may click the dial pad icon in the bottom of the screen to open the interface and enter the number of the extension. You may also enter an input number and call contacts through speed dial. 9 Call Logs Every telephone number called and received will be saved in the phones call log. There will be an indicator in the call logs that will display SIM1 or SIM2. All numbers in the call log can be dialed directly by clicking the dial icon on the right side of the screen. W hen the number appears on the list, click it to view details. Proximity Sensor The proximity sensor determines how far away an object is from the device. During the call or when you place the phone close to the ear, the backlight will turn off automatically which conserves battery and 10 prevents inadvertently touching. Contacts Enter: Click on the applications menu and select contacts • The default display is the phone contacts and SIM card contacts • The contacts are organized alphabetically by default. 11 Click the Search icon to enter the contact search interface. • Any numbers or letters associated with any of the contacts saved in the list will be shown in the search results. • If there were no matches for the inputted contact, the interface will display no contacts found. Add New Contact Add Contact Searc h 12 1. Click “Add Contact” icon 2. Select to save contacts to phone or SIM card 3. You may edit contact picture, name, telephone number, group, address, and email among other options 4. Click to finish and save contact. 13 Messaging You may use this function to exchange text messages and multimedia messages with your family and friends. The messages to and from th…

Text truncated - open the document above for the full version.

Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 63 of 72 8 EUT Constructional Details Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 64 of 72 Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 65 of 72 Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 66 of 72 Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 67 of 72

Label

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS15090072901 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC SAR REPORT Applicant: SWAGTEK Address of Applicant: 10205 NW19th Street, STE101Miami, Florida, 33172 USA Equipment Under Test (EUT) Product Name: 4 inch LTE Smart Phone Model No.: XL4 FCC ID: O55XL442A Applicable standards: FCC 47 CFR Part 2.1093 Date of Test: 15 Sep., 2015 ~ 04 Dec., 2015 Test Result: Maximum Reported 1-g SAR (W/kg) Head: 0.759 Body: 0.671 Hotspot: 0.795 Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 191 2 Version Version No. Date Description 00 07 Dec., 2015 Original Prepared by: Date: 07 Dec., 2015 Report Clerk Reviewed by: Date: 07 Dec., 2015 Project Engineer Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 191 3 Contents 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 SAR RESULTS SUMMARY ................................................................................................................................. 5 5 GENERAL INFORMATION .................................................................................................................................. 6 5.1 CLIENT INFORMATION ..................................................................................................................................................................... 6 5.2 GENERAL DESCRIPTION OF EUT ................................................................................................................................................... 6 5.3 MAXIMUM RF OUTPUT POWER ...................................................................................................................................................... 7 5.4 ENVIRONMENT OF TEST SITE ......................................................................................................................................................... 8 5.5 TEST LOCATION ............................................................................................................................................................................. 8 6 INTRODUCTION ................................................................................................................................................... 9 6.1 INTRODUCTION ............................................................................................................................................................................... 9 6.2 SAR DEFINITION ............................................................................................................................................................................ 9 7 RF EXPOSURE LIMITS ..................................................................................................................................... 10 7.1 UNCONTROLLED ENVIRONMENT ................................................................................................................................................... 10 7.2 CONTROLLED ENVIRONMENT ....................................................................................................................................................... 10 7.3 RF EXPOSURE LIMITS .................................................................................................................................................................. 10 8 SAR MEASUREMENT SYSTEM ....................................................................................................................... 11 8.1 E-FIELD PROBE............................................................................................................................................................................ 12 8.2 DATA ACQUISITION ELECTRONICS (DAE) .................................................................................................................................... 12 8.3 ROBOT .................................................................................................................................................................…

Text truncated - open the document above for the full version.

Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 101 of 191 Test Laboratory: CCIS Date/Time: 09.19.2015 15:47:21 DUT: Smart Phone; Type: XL4; Serial: 1# Communication System: UID 0, LTE(EU) (0); Frequency: 1860 MHz Medium parameters used: f = 1860 MHz; σ = 1.513 S/m; ε r = 52.414; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3924; ConvF(7.65, 7.65, 7.65); Calibrated: 07.10.2015;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1373; Calibrated: 07.23.2015  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1208  DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) LTE Band2 1RB 20(MHZ) Body Front/Low Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.678 W/kg LTE Band2 1RB 20(MHZ) Body Front/Low Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.973 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.919 W/kg SAR(1 g) = 0.521 W/kg; SAR(10 g) = 0.267 W/kg Maximum value of SAR (measured) = 0.700 W/kg 0 dB = 0.700 W/kg = -1.55 dBW/kg Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 102 of 191 Test Laboratory: CCIS Date/Time: 09.19.2015 18:02:19 DUT: Smart Phone; Type: XL4; Serial: 1# Communication System: UID 0, LTE-Fdd(USA) 1RB QPSK (0); Frequency: 1720 MHz Medium parameters used: f = 1720 MHz; σ = 1.508 S/m; ε r = 55.018; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3924; ConvF(7.94, 7.94, 7.94); Calibrated: 07.10.2015;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1373; Calibrated: 07.23.2015  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1208  DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) LTE Band4 1RB 20(MHZ) Body Front/Low Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.159 W/kg LTE Band4 1RB 20(MHZ) Body Front/Low Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 4.609 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 0.220 W/kg SAR(1 g) = 0.125 W/kg; SAR(10 g) = 0.066 W/kg Maximum value of SAR (measured) = 0.173 W/kg 0 dB = 0.173 W/kg = -7.62 dBW/kg Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 103 of 191 Test Laboratory: CCIS Date/Time: 09.20.2015 16:36:27 DUT: Smart Phone; Type: XL4; Serial: 1# Communication System: UID 0, LTE-Fdd(USA) 1RB QPSK (0); Frequency: 2510 MHz Medium parameters used (interpolated): f = 2510 MHz; σ = 1.954 S/m; ε r = 51.475; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3924; ConvF(7.3, 7.3, 7.3); Calibrated: 07.10.2015;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 31.0  Electronics: DAE4 Sn1373; Calibrated: 07.23.2015  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1208  DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) LTE Band 7 1RB 20(MHZ) Body Back/Low Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.135 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 0.208 W/kg SAR(1 g) = 0.108 W/kg; SAR(10 g) = 0.052 W/kg Maximum value of SAR (measured) = 0.149 W/kg LTE Band 7 1RB 20(MHZ) Body Back/Low Channel/Area Scan (41x61x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.0993 W/kg 0 dB = 0.0993 W/kg = -10.03 dBW/kg Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 104 of 191 Test Laboratory: CCIS Date/Time: 10.13.2015 21:20:48 DUT: Smart Phone; Type: XL4; Serial: 1# Communication System: UID 0, LTE-Fdd(USA) 1RB QPSK (0); Frequency: 710 MHz Medium parameters used: f = 710 MHz; ; σ = 0.86 S/m; ε r = 42.412; ρ = 1000 kg/m 3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY Configuration:  Probe: EX3DV4 - SN3924; ConvF(9.9, 9.9, 9.9); Calibrated: 07.10.2015;  Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 31.0  Electronics: DAE4 Sn1373; Calibrated: 07.23.2015  Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1208  DASY52 52.8.8(1222); SEMCAD X 14.6.10(7331) LTE Band 17 1RB (10MHz) Body Back/Middle Channel/Area Scan (41x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.213 W/kg LTE Band 17 1RB (10MHz) Body Back/Middle Channel/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 12.36 V/m; Power Drift = -0.16 dB Peak SAR (extrapolated) = 0.220 W/kg SAR(1 g) = 0.165 W/kg; SAR(10 g) = 0.120 W/kg Maximum value of SAR (measured) = 0.195 W/kg 0 dB = 0.195 W/kg = -7.10 dBW/kg Report No: CCIS15090072901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900729RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 105 of 191 Test…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS15090072801 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT (GSM & WCDMA) Applicant: SWAGTEK Address of Applicant: 10205 NW19th Street, STE101Miami, Florida, 33172 USA Equipment Under Test (EUT) Product Name: 4 inch LTE Smart Phone Model No.: XL4 FCC ID: O55XL442A Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 22 Subpart H FCC CFR Title 47 Part 24 Subpart E Date of sample receipt: 11 Sep., 2015 Date of Test: 11 Sep., to 27 Oct., 2015 Date of report issued: 27 Oct., 2015 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 72 2. Version Version No. Date Description 00 27 Oct., 2015 Original Tested by: Date: 27 Oct., 2015 Test Engineer Reviewed by: Date: 27 Oct., 2015 Project Engineer Report No: CCIS15090072801 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 72 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES .......................................................................................................................................................... 8 5.4 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................................... 8 5.5 TEST METHODOLOGY ............................................................................................................................................ 8 5.6 LABORATORY FACILITY .......................................................................................................................................... 8 5.7 LABORATORY LOCATION ....................................................................................................................................... 8 5.8 TEST INSTRUMENTS LIST ....................................................................................................................................... 9 6. SYSTEM TEST CONFIGURATION ........................................................................................................................ 10 6.1 EUT CONFIGURATION ......................................................................................................................................... 10 6.2 EUT EXERCISE .................................................................................................................................................... 10 6.3 CONFIGURATION OF TESTED SYSTEM ................................................................................................................ 10 6.4 DESCRIPTION OF TEST MODES ........................................................................................................................... 10 6.5 CONDUCTED OUTPUT POWER ............................................................................................................................ 11 6.6 OCCUPY BANDWIDTH .......................................................................................................................................... 16 6.7 PEAK-TO-AVERAGE POWER RATIO .................................................................................................................... 30 6.8 MODULATION CHARACTERISTIC ........................................................…

Text truncated - open the document above for the full version.

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS15090072806 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1. Cover Page FCC REPORT (LTE) Applicant: SWAGTEK Address of Applicant: 10205 NW19th Street, STE101Miami, Florida, 33172 USA Equipment Under Test (EUT) Product Name: 4 inch LTE Smart Phone Model No.: XL4 FCC ID: O55XL442A Applicable standards: FCC CFR Title 47 Part 2 FCC CFR Title 47 Part 24 Subpart E FCC CFR Title 47 Part 27 Subpart L FCC CFR Title 47 Part 27 Subpart M FCC CFR Title 47 Part 27 Subpart H Date of sample receipt: 11 Sep., 2015 Date of Test: 11 Sep., to 27 Oct., 2015 Date of report issued: 27 Oct., 2015 Test Result: PASS* * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS15090072806 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 459 2. Version Version No. Date Description 00 27 Oct., 2015 Original Tested by: Date: 27 Oct., 2015 Test Engineer Reviewed by: Date: 27 Oct., 2015 Project Engineer Report No: CCIS15090072806 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS150900728RF No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 459 3. Contents Page 1. COVER PAGE .............................................................................................................................................................. 1 2. VERSION ....................................................................................................................................................................... 2 3. CONTENTS ................................................................................................................................................................... 3 4. TEST SUMMARY ......................................................................................................................................................... 4 5. GENERAL INFORMATION ........................................................................................................................................ 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. ....................................................................................................................... 5 5.3 TEST MODES ........................................................................................................................................................ 11 5.4 RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................................. 11 5.5 TEST METHODOLOGY .......................................................................................................................................... 11 5.6 LABORATORY FACILITY........................................................................................................................................ 11 5.7 LABORATORY LOCATION ........................................................................................................................…

Text truncated - open the document above for the full version.