O5OGD-W913N802.11b/g/n device

GD-W913N/ND 1 1 Cable Connection Please follow the steps below to connect the device Step 1 Connect the ADSL port of the router to the Modem port of the splitter using a telephone cable. Connect the phone to the phone port of the splitter using a telephone cable. Connect the incoming line to the Line port of the splitter. Step 2 The spliiter has three ports: LINE: Connect to a wall phone jack (RJ-11 jack) Modem: Connect to the ADSL interface of the router PHONE: Connect to a telephone set Step 3 Connect the LAN port of the router to the network card of the PC through an Ethernet cable. Step 4 Plug one end of the power adapter into the wall outlet and the other end to the Power port of the router. The followig figure show the connection of the DSL router, PC and telephones. Figure 1 Connecting the DSL router GD-W913N/ND 2 2 WAN Configuration for Internet Connection 2.1 Configuring IP Address of Network Card Configure TCP/IP properties of your network card to Obtain an IP address automatically from modem, or set the IP address of the computer with the same network mask of the modem. For example, if the IP address of modem is 192.168.1.1/255.255.255.0, you can set the IP address of the computer to 192.168.1.x/255.255.255.0. The range for x is from 2 to 253. 2.2 Accessing Router To log in to the DSL router, perform the followings: Step 1 Open a Web browser on your computer. Step 2 Enter http://192.168.1.1 (the default IP address of the DSL router) in the address bar. The login page appears. Step 3 Enter the user name and the password. Step 4 Click OK to log in to the Web page. Otherwise, click Cancel to exit the login page. Figure 2 Login page After logging in to the DSL router as a super user, you can query, configure, and modify all the settings, and diagnose the system. GD-W913N/ND 3 2.3 WAN Service Choose Advance Setup > WAN Service, and the following page appears. Figure 3 WAN service configuration In this page, you may add, remove or edit a WAN service. Adding a PPPoE WAN Service This section describes the steps for adding the PPPoE WAN service. Step1 In the Wide Area Network (WAN) Service Setup page, click the Add button to display the following page. (First a proper ATM configuration should be added for this WAN service.) Figure 4 WAN service interface configuration (PPPoE) GD-W913N/ND 4 Step2 In this page, you can select a ATM Interface for the WAN service. After selecting the ATM interface, click Next to display the following page. Figure 5 WAN service configuration (PPPoE) Step3 In this page, select the WAN service type to be PPP over Ethernet (PPPoE). Click Next to display the following page. GD-W913N/ND 5 Figure 6 PPP username and password (PPPoE) Step4 In this page, you can modify the PPP username, PPP password, PPPoE service name and authentication method. PPP Username: The correct user name provided by your ISP. PPP Password: The correct password provided by your ISP. PPPoE Service Name: If your ISP provides it to you, please enter it. If not, do not enter any information. Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO. Enable Fullcone NAT: NAT is one where all requests from the same internal IP address and port are mapped to the same external IP address and port. Furthermore, any external host can send a packet to the internal host, by sending a packet to the mapped external address. GD-W913N/ND 6 Dial on demand (with idle timeout timer): If this function is enabled, you need to enter the idle timeout time. Within the preset minutes, if the modem does not detect the flow of the user continuously, the modem automatically stops the PPPoE connection. Once it detects the flow (like access to a webpage), the modem restarts the PPPoE dialup. If this function is disabled, the modem performs PPPoE dial-up all the time. The PPPoE connnection does not stop, unless the modem is powered off and DSLAM or uplink equipment is abnormal. PPP IP extension: If you want to configure DMZ Host, you should enable it first. Use Static IPv4 Address: If this function is disabled, the modem obtains an IP address assigned by an uplink equipment such as BAS, through PPPoE dial-up. If this function is enabled, the modem uses this IP address as the WAN IP address. Enable PPP Debug Mode: Enable or disable this function. Bridge PPPoE Frames Between WAN and Local Ports: Enable or disable this function. Enable IGMP Multicast Proxy: If you want PPPoE mode to support IPTV, enable it. Step5 After setting the parameters, click Next to display the following page. GD-W913N/ND 7 Figure 7 Routing-default gateway (PPPoE) Step6 In this page, select a preferred WAN interface as the system default gateway interface and then click Next to display the following page. GD-W913N/ND 8 Figure 8 DNS server configuration (PPPoE) Step7 In this page, you may select a DNS server interface from the available WAN interfaces. Click Next, and the following page appears. Figure 9 PPPoE summary Step8 In this page, it displays the information about the PPPoE settngs. Click Apply/Save to save and apply the settings. GD-W913N/ND 9 2.4 Wireless Choose Wireless > Basic to display the following page. This page allows you to configure the basic features of the wireless LAN interface. Enable Wireless: Enable or disable the wireless function. Hide Access Point: if you want to hide any access point for your router, select this option, and then a station cannot obtain the SSID through the passive scanning. GD-W913N/ND 10 Clients Isolation: When many clients connect to the same access point, they can access each other. If you want to disable the access between the clients that connect to the same access point, you can select this option. Disable WMM Advertise: After enabling this option, the transmission performance multimedia of the voice and video data can be improved. Enable Wireless Multicast Forwarding (WMF): After enabling this option, the transmission quality of video service such as IPTV can b…

Text truncated - open the document above for the full version.

Shenzhen Landing Electronics Co., Ltd. A409-410, Nanshan Medical Instrument Industry Park, 1019# Nanhai RD,Shenzhen.China Tel: +86-755-26021470 we, Shenzhen Landing Electronics Co., Ltd. declare under our sole responsibility that the channel of below product is 0-11 channels in USA. Product Description: 300Mbps Wireless ADSL2/2+ Router Model/Type Designation: GD-W913ND FCC ID: O5OGD-W913N Thank you. Sincerely, By: ____ ___ Jiayi Deng __ (Signature 1 ) (Print name) Title: __Manager__ On behalf of: __ Shenzhen Landing Electronics Co., Ltd.__ (Company Name) Telephone: __ +86-755-26021470__

Shenzhen Landing Electronics Co., Ltd. A409-410 Nanshan Medical Instrument Industry Park,1019# Nanhai Road,Nanshan District,Shenzhen,Guangdong,518067,P.R.China. Tel: +86-755-26021470 022311 – 6 Authority to Act as Agent Date: _July 27, 2012_ ___ American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: __ GUANGZHOU GRG METROLOGY&TEST CO.,LTD.__ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: ____9 Months___ By: _______________________ __ Jiayi Deng ___ ____ (Signature 1 ) (Print name) Title: __Manager __ On behalf of: __ Shenzhen Landing Electronics Co., Ltd. ___ (Company Name) Telephone: __ +86-755-26021470 _ _ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Shenzhen Landing Electronics Co., Ltd. A409-410 Nanshan Medical Instrument Industry Park,1019# Nanhai Road,Nanshan District,Shenzhen,Guangdong,518067,P.R.China. Tel: +86-755-26021470 022311 – 6 Request for Confidentiality Date: _ July 27, 2012____ Subject: Confidentiality Request for: __ O5OGD-W913N ___ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term √ Permanent Block Diagrams √ Short Term Permanent External Photos √ Short Term Permanent* 2 Internal Photos Short Term √ Permanent Operation Description/Theory of Operation Short Term √ Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term √ Permanent Schematics √ Short Term Permanent Test Setup Photos √ Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ __ Shenzhen Landing Electronics Co., Ltd. __ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __45_ _ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.”

LABEL LOCATION

RF Exposure Compliance Requirement 1. Standard requirement 15.247(b)(4) requirement: (4) The conducted output power limit specified in paragraph (b) of this section is based on the use of antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this section. if transmitting antennas of directional gain greater than 6 dBi are used. the conducted output power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1). (b)(2). and (b)(3) of this section. as appropriate. by the amount in dB that the directional gain of the antenna exceeds 6 dBi. TCB Exclusion List (7 July 2002) Exposure category low threshold high threshold general population (60/fGHz) mW. d < 2.5 cm (120/fGHz) mW. d ≥ 2.5 cm (900/fGHz) mW. d < 20 cm occupational (375/fGHz) mW. d < 2.5 cm (900/fGHz) mW. d ≥ 2.5 cm (2250/fGHz) mW. d < 20 cm When d20cmthe EUT should mark the recommend use distance for EUT external antenna and the MPE=1mW/cm 2 . 2. EUT RF Exposure The Max Conducted Peak Output Power is 29.80 dBm(95.50mW) in channel 1; The best case gain of the antenna is 3.0dBi. 3.0dB logarithmic terms convert to numeric result is nearly 2.0 According to the formula. calculate the EIRP test result: EIRP= P x G = 95.50mW x 2.0 = 191.00 mW S=1mW/cm 2 So,R= S PG π4 =5.51cm So the recommend use distance for EUT external antenna is larger than 5.51centimeter.

Page 1 of 94 FCC ID O5OGD-W913N TEST REPORT Report No.: EM201200254-4 Application No.: ZJ00016147 Client: Shenzhen Landing Electronics Co., Ltd. Address: A409-410 Nanshan Medical Instrument Industry Park,1019# Nanhai Road,Nanshan District,Shenzhen,Guangdong,518067,P.R.China Sample Description: 300Mbps Wireless ADSL2/2+ Router Model: GD-W913ND FCC ID: O5OGD-W913N Test Specification: FCC Part 15,Subpart C(Section 15.247) Issue Date: 2012-06-29 Test Result: Pass. Prepared By: Reviewed By: Approved By: Lynn Xiao/ Test Engineer Angel Liu / Technical Assistance Gavin Wu / Manager Date:2012-06-29 Date:2012-06-29 Date:2012-06-29 Other Aspects: / Abbreviations: ok / P = passed; fail / F = failed; n.a. / N = not applicable The test result in this test report refers exclusively to the presented test sample. This report shall not be reproduced except in full, without the written approval of GRGT. GRG Metrology and Test Co., Ltd. Address: 163, Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, P.R. China Tel:+86-20-38699960 Fax:+86-20-38695185 Email: [email protected] http://www.grgtest.com Ver.:1.0 / 01.Jan.2011 Report No.: EM201200254-4 Application No.: ZJ00016147 Page 2 of 94 FCC ID O5OGD-W913N DIRECTIONS OF TEST 1. This station carries out test task according to the national regulation of verifications which can be traced to National Primary Standards and BIPM. 2. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. 3. If there is any objection concerning the test, the client should inform the laboratory within 15 days from the date of receiving the test report. Report No.: EM201200254-4 Application No.: ZJ00016147 Page 3 of 94 FCC ID O5OGD-W913N Table of Contents 1. TEST RESULT SUMMARY ............................................................................................................................................... 5 2. GENERAL DESCRIPTION OF EUT................................................................................................................................. 6 2.1 APPLICANT .................................................................................................................................................................... 6 2.2 MANUFACTURER ......................................................................................................................................................... 6 2.3 BASIC DESCRIPTION OF EQUIPMENT UNDER TEST ............................................................................................. 6 3. LABORATORY AND ACCREDITATIONS ..................................................................................................................... 7 3.1 LABORATORY............................................................................................................................................................... 7 3.2 ACCREDITATIONS ....................................................................................................................................................... 7 3.3 MEASUREMENT UNCERTAINTY............................................................................................................................... 7 3.4 LIST OF USED TEST EQUIPMENT AT GRGT............................................................................................................. 8 4. ANTENNA REQUIREMENT ............................................................................................................................................. 9 5. CONDUCTED EMISSION MEASUREMENT ............................................................................................................... 10 5.1 LIMITS....................................................................................................................................................................... 10 5.2TEST PROCEDURES................................................................................................................................................. 10 5.3 TEST SETUP ............................................................................................................................................................. 11 5.4 TEST RESULTS ......................................................................................................................................................... 12 6. RADIATED ELECTROMAGNETIC DISTURBANCE................................................................................................. 14 6.1 LIMITS....................................................................................................................................................................... 14 6.2TEST PROCEDURES................................................................................................................................................. 14 6.3 TEST SETUP ............................................................................................................................................................. 15 6.4 TEST RESULTS ......................................................................................................................................................... 17 7. SPURIOUS EMISSIONS AT ANTENNA PORT ............................................................................................................ 41 7.1 LIMITS....................................................................................................................................................................... 41 7.2 TEST PROCEDURES................................................................................................................................................ 41 7.3 TEST SETUP ............................................................................................................................................................. 41 7.4 TEST RESULTS ........…

Text truncated - open the document above for the full version.

TEST SETUP PHOTOS