O6TGDMALLBTH600NXBluetooth Headset

Information to user Notice: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. ThisequipmentcomplieswiththeFCCRFexposurelimitsset forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, exceptin accordance to FCC multi-transmitter RF exposureprocedures.

GLOBAL DIGITECH CO LTD NO25 ALLEY56 LANE245 SECTION4 BADE RD TAIPEI Taiwan 105 Date: 2014/08/14 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, GLOBAL DIGITECH CO LTD, hereby authorize A Test Lab Techno Corp., address: No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C., phone: +886-3-2710188 to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 2015/02/14 Sincerely, ___________________________________ KAREN YANG Tel: 886227668817 E-mail: [email protected]

GLOBAL DIGITECH CO LTD Date: 2014/08/14 Subject: DoC declaration To Whom it may concern, We, as the grantee of this project FCC ID: O6TGDMALLBTH600NX, would like to declare that the composite portion categorized as computer peripheral has been authorized under the Declaration of Conformity procedures. Brand Name and Model Name of the specified radio equipment: GDMALL/ BTH600NX FCC ID: O6TGDMALLBTH600NX Product Name: BLUETOOTH HEADSET Regards, ___________________________________ KAREN YANG Tel: 886227668817 E-mail: [email protected]

GLOBAL DIGITECH CO LTD Date 2014/08/14 BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: O6TGDMALLBTH600NX Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, GLOBAL DIGITECH CO LTD,hereby requests permanent confident Matias Corporation Schematics Block Diagrams Operational Description(Antenna Specification) GLOBAL DIGITECH CO LTD also hereby requests short-term confidential treatment of information accompanying this application as outlined below for a period of 180 days: Internal Photos External Photos User Manual Test Set-up Photographs The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: KAREN YANG Telephone Number: 886227668817 Email: [email protected]

1 of 4 External Photos Model Number: BTH600NX FCC ID: O6TGDMALLBTH600NX 2 of 4 EUT Photo 1 ) EUT Photo 2 ) 3 of 4 EUT Photo 3 ) EUT Photo 4 ) 4 of 4 EUT Photo 5 ) EUT Photo 6 )

ID Label info & Label Location FCC ID : O6TGDMALLBTH600NX

1 of 4 Internal Photos Model Number: BTH600NX FCC ID: O6TGDMALLBTH600NX 2 of 4 EUT Photo 1 ) EUT Photo 2 ) 3 of 4 EUT Photo 3 ) EUT Photo 4 ) Antenna 4 of 4 EUT Photo 5 )

A Test Lab Techno Corp. Changan Lab：No. 140 -1, Changan Street, Bade City, Taoyuan County, Taiwan R.O.C. Te l：886-3-271-0188 / Fax：886-3-271-0190 SAR EVALUATION REPORT Test Report No. ： 1410FS14 Applicant ： GLOBAL DIGITECH CO LTD Product Type ： BLUETOOTH HEADSET Trade Name ： GDMALL Model Number ： BTH600NX Date of Received ： Jul. 18, 2014 Test Period ： Oct. 14, 2014 Date of Issued ： Oct. 22, 2014 Test Environment ： Ambient Temperature： 22 ± 2 ° C Relative Humidity：40 - 70 % Standard ： KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r03 KDB 865664 D02 RF Exposure Reporting v01r01 KDB 447498 D01 General RF Exposure Guidance v05r02 ANSI/IEEE C95.1-1999 IEEE Std. 1528-2013 IEEE Std. 1528a-2005 47 CFR Part §2.1093; Max. Reported SAR ： 0.094 W/kg Body SAR Test Lab Location ： Chang-an Lab 1. The test operations have to be performed with cautious behavior, the test results are as attached. 2. The test results are under chamber environment of A Test Lab Techno Corp. A Test Lab Techno Corp. does not assume responsibility for any conclusions and generalizations drawn from the test results with regard to other specimens or samples. 3. The measurement report has to be written approval of A Test Lab Techno Corp. It may only be reproduced or published in full. This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. The test results in the report only apply to the tested sample. Approved By ： Tested By ： (Bill Hu) (Sky Chou) Report Number: 1410FS14Page 1 of 60 ©2014 A Test Lab Techno Corp. Contents 1. Description of Equipment under Test (EUT) .................................................................................................. 3 2. Introduction..................................................................................................................................................... 4 2.1 SAR Definition ..................................................................................................................................... 4 3. SAR Measurement Setup .............................................................................................................................. 5 3.1 DASY E-Field Probe System............................................................................................................... 6 3.2 Data Acquisition Electronic (DAE) System .......................................................................................... 9 3.3 Robot ................................................................................................................................................... 9 3.4 Measurement Server........................................................................................................................... 9 3.5 Device Holder .................................................................................................................................... 10 3.6 Phantom - SAM v4.0 ......................................................................................................................... 10 3.7 Oval Flat Phantom - ELI 4.0 .............................................................................................................. 11 3.8 Data Storage and Evaluation............................................................................................................. 11 4. Tissue Simulating Liquids............................................................................................................................. 14 4.1 Ingredients......................................................................................................................................... 15 4.2 Recipes.............................................................................................................................................. 15 4.3 Liquid Depth ...................................................................................................................................... 16 5. SAR Testing with RF Transmitters ............................................................................................................... 17 5.1 Conducted Power .............................................................................................................................. 17 5.2 Antenna location................................................................................................................................ 18 5.3 Stand-alone SAR Evaluate................................................................................................................ 19 5.4 Simultaneous Transmitting Evaluate ................................................................................................. 19 5.5 SAR test reduction according to KDB ............................................................................................... 20 6. System Verification and Validation ............................................................................................................... 21 6.1 Symmetric Dipoles for System Verification ....................................................................................... 21 6.2 Liquid Parameters ............................................................................................................................. 22 6.3 Verification Summary ........................................................................................................................ 22 6.4 Validation Summary .......................................................................................................................... 23 7. Test Equipment List ...................................................................................................................................... 24 8. Measurement Uncertainty ............................................................................................................................ 25 9. Measurement Procedure.......................................................…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART C Product Type ： BLUETOOTH HEADSET Applicant ： GLOBAL DIGITECH CO LTD Address ： NO25 ALY56 LN245 SEC4 BADE RD TAIPEI TAIWAN 105 Trade Name ： GDMALL Model Number ： BTH600NX Test Specification ： FCC 47 CFR PART 15 SUBPART C: Oct., 2013 ANSI C63.4:2009 Receive Date ： Jul. 18, 2014 Test Period ： Jul. 21~ Jul. 22, 2014 Issue Date ： Oct. 02, 2014 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1407FR19 1 of 48 Revision History Rev. Issue Date Revisions Revised By 00 Oct. 02, 2014 Initial Issue A Test Lab Techno Corp. Report Number: 1407FR19 2 of 48 Verification of Compliance Issued Date: 10/02/2014 Product Type : BLUETOOTH HEADSET Applicant : GLOBAL DIGITECH CO LTD Address : NO25 ALY56 LN245 SEC4 BADE RD TAIPEI TAIWAN 105 Trade Name : GDMALL Model Number : BTH600NX FCC ID : O6TGDMALLBTH600NX EUT Rated Voltage : DC 5V (USB Interface) Test Voltage : DC 3.7V Applicable Standard : FCC 47 CFR PART 15 SUBPART C: Oct., 2013 ANSI C63.4:2009 Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 15.207, 15.209, 15.247 . The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Fly Lu) (Testing Engineer) (Eric Ou Yang) A Test Lab Techno Corp. Report Number: 1407FR19 3 of 48 TABLE OF CONTENTS 1 General Information.................................................................................................................................... 6 1.1. Summary of Test Result ...................................................................................................................... 6 1.2. Measurement Uncertainty ................................................................................................................... 6 2 EUT Description .......................................................................................................................................... 7 3 Test Methodology ....................................................................................................................................... 8 3.1. Mode of Operation .............................................................................................................................. 8 3.2. EUT Exercise Software....................................................................................................................... 8 3.3. Configuration of Test System Details .................................................................................................. 9 3.4. Test Site Environment ......................................................................................................................... 9 4 Maximum Conducted Output Power Measurement .............................................................................. 10 4.1. Limit................................................................................................................................................... 10 4.2. Test Setup ......................................................................................................................................... 10 4.3. Test Instruments ................................................................................................................................ 10 4.4. Test Procedure .................................................................................................................................. 10 4.5. Test Result .........................................................................................................................................11 5 Radiated Interference Measurement....................................................................................................... 13 5.1. Limit................................................................................................................................................... 13 5.2. Test Instruments ................................................................................................................................ 13 5.3. Setup ................................................................................................................................................. 14 5.4. Test Procedure .................................................................................................................................. 15 5.5. Test Result ........................................................................................................................................ 16 6 20dB RF Bandwidth and 99 % Occupied Bandwidth Measurement .................................................... 20 6.1. Limit................................................................................................................................................... 20 6.2. Test Setup .......................…

Text truncated - open the document above for the full version.

Part 15C Test Setup Photographs Radiated Emissions Test Configuration: Below 1GHz _ Front View Below 1GHz _ Rear View A Test Lab Techno Corp. Report Number: 1407FR19 1 of 2 Above 1GHz _ Front View Above 1GHz _ Rear View A Test Lab Techno Corp. Report Number: 1407FR19 2 of 2