O86-FLEX12BTablet

Tablet User Manual Model : FLEX 12B Make sure to read the user manual before operating the new device. Dear user: Thank you for purchasing the tablet! Please carefully read this product instruction and all accompanying manuals before using this product in order to protect your safety and interests. If you fail to operate or use the product based on the product manual, resulting in any personal injury, property or other losses, our company would not be responsible. Regarding this product manual: The copyright of the instruction manual belongs to our company; The symbols and font sizes involved in the manual belong to their respective rights holders; If t he content o f t he manual is inconsistent with t he actual product, the actual product shall prevail. The ownership and intellectual property rights of third-party product names or attributes mentioned in this user manual belong to the owners of each product or attribute and are protected by current intellectual property laws and international treaties. When the following situations occur, this product will no longer be covered by our company's warranty and services: (1) This product has undergone unauthorized repairs, specification changes, component replacements, or other unauthorized activities. (2) The serial number of this product is unclear or missing. If you have any objections to any content or terms of the manual, please submit a written objection to our company within seven days after purchasing the machine. Otherwise, it will be deemed that you have agreed, understood, and accepted all contents of the manual. Thank you for your cooperation! Disclaimer - 1 - Please read and comply with all security information before using this product to ensure optimal product performance and avoid dangerous or illegal situations ! Please use the accessories that come with this model of product; Using power supplies, chargers, or batteries that are not approved by the manufacturer may cause fire, explosion, or other risks. Do not let the tablet come into contact with magnets or other magnetic substances. Do not place the tablet in an overheated environment to avoid damage to the tablet; In high-temperature environments, overheating the battery may cause an explosion. Do not block any items from the ventilation vents or other open interfaces of the tablet. Otherwise, there may be a fire caused by int ernal component short circuits or electrical leakage caused by conductive obstructions. Do not spill any liquid onto the tablet to avoid damaging it or causing combustion. Keep the device dry. Do not swallow or bit e this product or accessories to avoid injury or product malfunction. Please comply with local regulations when disposing of this product, batteries, and other accessories. Do not dispose of old batteries in household waste; The battery is prohibited from disassembly, impact, squeezing, or being thrown int o f ire. If severe expansion occurs, please do not continue to use it. Specially pay attention to avoiding using tablet during thunderstorm seasons. Security Tips - 2 - 1. 2. 3. 4. 5. 6. 7. 8. Product Overview Volume Button Photosensitive hole Indicator Light Front-facing Camera Touch Screen Rear Camera - 3 - The product (host) warranty period is one year, the battery warranty period is six months, and the effective date is the date of purchase of the product by the customer. Within seven days from the date of purchase of the product, in case of product quality problems, consumers can choose to return or replace the same type of product. Within 15 days from the date of purchase of the product, if there is a product quality problem, consumers can choose to replace the same type of product or free repair. The product (host) warranty period is one year, the battery warranty period is six months, and the effective date is the date of purchase of the product by the customer. Within seven days from the date of purchase of the product, in case of product quality problems, consumers can choose to return or replace the same type of product. Within 15 days from the date of purchase of the product, if there is a product quality problem, consumers can choose to replace the same type of product or free repair. Power Button Loudspeaker Headphone Socket Type C interface Volume ButtonAdjust the volume of the system or multimedia Photosensitive hole Adjust the screen brightness according to the brightness of the outside light Show the working status of tablet components Take photos or video chat Indicator Light Front-facing Camera Touch Screen Displays the text or graphics, support multi-touch screen Rear CameraTake photos or videos, scan QR codes, etc Type C interfaceUsed to transfer data or charge the tablet Audio outputHeadphone Socket Power Button Long press the power button to turn on or off, tap to lock the screen when the device is powered on LoudspeakerVoice output system - 4 - Chargingthetablet You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the tablet). Use standard specification charger and cables. Other chargers or cables may damage the device. This will invalidate your tablet warranty. Do not expose your tablet to extreme temperatures lower than 0 °C and higher than 45 °C . The physicochemical processes created by chargers impose temperature limits when charging the battery. Your tablet automatically protects the batteries in extreme temperatures. Stop charging when battery is higher than 55 °C ,and restore charging when below 50 °C . - 8 - System Physical Standard Configuration: Interface Configuration: Power Software Configuration: Type Product Form Dimensions Housing Weight LCD panel Process composition CPU SSD Key Fornt Camera Real Camera Speaker fingerprint Descriptions Tablet 282.1*184.9*7.5mm Full metal 519g 12.6" AMOLED with TP,2560x1600 Glass GT7986P+ RM692E6 "Alder Lake 6W N100, Speed: 0.8GHz~3.4GHz N200, Speed: 1.0GHz~3.7GHz(option) N300, Speed: 0.8GHz~3.8GHz(option)" …

Text truncated - open the document above for the full version.

Rev1/26/2023 MobileDemand,LC FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:12-18-2023 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:O86-FLEX12B MobileDemand,LC("theapplicant")certifiesthattheequipmentforwhichauthorizationissoughtis not“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection 2.903oftheFCCrules. Sincerely, (Applicantsignature) (Applicantprintedname)MattMiller/President Rev1/26/2023 MobileDemand,LC FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:12-18-2023 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:O86-FLEX12B MobileDemand,LC(“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)MattMiller/President

MobileDemand,LC Date:12-18-2023 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD FCCID:O86-FLEX12B ToWhomItMayConcern: ThisletteristoascertainthatMobileDemand,LC EUT:Tablet MODELNo.:FLEX12B HasbeentheunitsusedforconductingFCCcompliancetesting,theSDoCparthavebe testedbyEMTEK(SHENZHEN)CO.,LTD. Ifyouhaveanyquestionorconcerns,pls.contactus. Sincerely, Client’sname/title：MattMiller/President Contactinformation/address:MobileDemand,LC/1501BoysonSquareDrive,Suite101, Hiawatha,Iowa,UnitedStates

Rev11/20/07 MobileDemand,LC FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationof FCCID: O86-FLEX12B PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName BlockDiagram, Schematics, OperationalDescription, softwaresecurityinformation BOMList BlockDiagram, Schematics, OperationalDescription, softwaresecurityinformation BOMList Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. Client’sname/title：MattMiller/President Contactinformation/address:MobileDemand,LC/1501BoysonSquareDrive,Suite101, Hiawatha,Iowa,UnitedStates Date ： 2023-12-18

MobileDemand,LC FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:12-18-2023 SUBJECT:FCCApplicationforFCCID:O86-FLEX12B ToWhomItMayConcern: We,theundersigned,herebyauthorizeLisaWangatEMTEK(SHENZHEN)CO.,LTD.on ourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment.Any andallactscarriedoutbyEMTEK(SHENZHEN)CO.,LTD.onourbehalfshallhavethe sameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,the applicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301ofthe Anti-DrugActof1988,21USC853a,andnopartytotheapplicationissubjecttoadenial offederalbenefitspursuanttothatsection. Regards, Sincerely, Client’sname/title ： MattMiller/President Contactinformation/address:MobileDemand,LC/1501BoysonSquareDrive,Suite101,Hiawatha,Iowa, UnitedStates

MobileDemand,LC Date:2023-12-27 To:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD RE:ShortTermConfidentialityRequestFor FCCID:O86-FLEX12B ToWhomItMayConcern: Inaccordancewithsections0.457and0.459ofCFR47,MobileDemand,LC.requests short-termConfidentialityoffollowingsectionsofthisapplicationforaperiodof180 daysaftergrantisissued. Testsetupphotos Externalphotos Internalphotos User’smanual Thesedocumentscontaindetailedsystemandequipmentdescriptionsandrelated informationabouttheproduct,whichMobileDemand,LCconsiderstobeproprietary, confidential,andacustomdesignandotherwise,wouldnotreleasetothegeneralpublic. Sincethisdesignisabasisfromwhichfuturetechnologicalproductswillevolve, MobileDemand,LCfeelsthatthisinformationwouldbeofbenefittoitscompetitors,and thatthedisclosureoftheinformationinthesedocumentswouldgiveourcompetitorsan unfairadvantageinthemarket. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Client’sname/title ： MattMiller/President Contactinformation/address:MobileDemand,LC/1501BoysonSquareDrive,Suite 101,Hiawatha,Iowa,UnitedStates

EUT EXTERNAL PHOTOGRAPHS ----------------The end----------------

Product NameTablet ModelFLEX 12B Input Rating20VDC, 3.25A FCC IDO86-FLEX12B IC10591A-FLEX12B CAN ICES-003(B) / NMB-003(B) ManufacturerMobileDemand, L.C. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 10mm Product NameTablet ModelFLEX 12B Input Rating20VDC, 3.25A FCC IDO86-FLEX12B IC10591A-FLEX12B CAN ICES-003(B) / NMB-003(B) ManufacturerMobileDemand, L.C. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 粘贴位置：粘贴于底壳，居中对齐，距离底壳下方10mm 92.8mm

EUT INTERNAL PHOTOGRAPHS AUX FPC Antenna Main FPC Antenna

----------------The end----------------

. Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/4 System Check_H2450 DUT: Dipole 2450 MHz; Type:D2450V2; SN:927 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz;σ=1.78S/m;ε r =40.11;ρ=1000kg/m 3 AmbientTemperature：22.0°C; LiquidTemperature：21.8°C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(8.06, 8.06, 8.06); Calibrated: 2023/5/17; - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (41x51x1):Interpolated grid: dx=2.000 mm, dy=2.000 mm Maximum value of SAR (interpolated) = 24.6 W/kg Pin=250mW/Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 113.7 V/m; Power Drift = 0.10 dB Peak SAR (extrapolated) = 29.6 W/kg SAR(1 g) = 13.09 W/kg; SAR(10 g) = 6.09 W/kg Maximum value of SAR (measured) = 23.0 W/kg Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/5 System Check_H5250 DUT: Dipole 5GHzV2;Type:D5GHzV2; SN:1169 Communication System: CW; Frequency: 5250 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5250 MHz;σ=4.68S/m;ε r = 36.82;ρ= 1000 kg/m 3 AmbientTemperature：22.2°C; LiquidTemperature：22.0°C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.85, 5.85, 5.85); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (7x9x1):Interpolated grid: dx=10.00 mm, dy=10.00 mm Maximum value of SAR (interpolated) = 22.1 W/kg Pin=100mW/Zoom Scan (8x8x13)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 58.428 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 35.4 W/kg SAR(1 g) =7.55 W/kg; SAR(10 g) = 2.14 W/kg Maximum value of SAR (measured) = 23.4 W/kg Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/6 System Check_H5600 DUT: Dipole 5GHzV2;Type:D5GHzV2; SN:1169 Communication System: CW; Frequency: 5600 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5600 MHz;σ=5.20S/m;ε r = 36.18;ρ= 1000 kg/m 3 AmbientTemperature：22.5°C; LiquidTemperature：22.3°C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.17, 5.17, 5.17); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (7x9x1):Interpolated grid: dx=10.00 mm, dy=10.00 mm Maximum value of SAR (interpolated) = 23.2 W/kg Pin=100mW/Zoom Scan (8x8x13)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 59.845 V/m; Power Drift = 0.05 dB Peak SAR (extrapolated) = 39.2 W/kg SAR(1 g) = 7.82 W/kg; SAR(10 g) = 2.19 W/kg Maximum value of SAR (measured) = 24.0 W/kg . Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/7 System Check_H5750 DUT: Dipole 5GHzV2;Type:D5GHzV2; SN:1169 Communication System: CW; Frequency: 5750 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5750 MHz;σ=5.40S/m;ε r = 35.77;ρ= 1000 kg/m 3 AmbientTemperature：21.6°C; LiquidTemperature：21.4°C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.2, 5.2, 5.2); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=100mW/Area Scan (7x9x1):Interpolated grid: dx=10.00 mm, dy=10.00 mm Maximum value of SAR (interpolated) = 21.2 W/kg Pin=100mW/Zoom Scan (8x8x13)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 49.715 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 33.4 W/kg SAR(1 g) = 7.58 W/kg; SAR(10 g) = 2.16 W/kg Maximum value of SAR (measured) = 21.5 W/kg

Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/4 2.4GWIFI DUT: FLEX 12B Communication System: 8 02.11b ; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used : f = 2437 MHz; σ =1.776 S/m; ε r = 40.4 24; ρ = 1000 kg/m 3 Ambient Temperature：22.0 °C; Liquid Temperature：21.8 °C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(8.06, 8.06, 8.06); Calibrated: 2023/5/17; - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Bottom-ANTB/Area Scan (6x12x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0548 W/kg Bottom-ANTB/Zoom Scan (5x5x7)/Cube 0:Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 2.659 V/m; Power Drift = 0.12 dB Peak SAR (extrapolated) = 0.486 W/kg SAR(1 g) = 0.172 W/kg; SAR(10 g) = 0.061 W/kg Maximum value of SAR (measured) = 0.191 W/kg Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/5 5.2GWIFI DUT: FLEX 12B Communication System: 8 02.11a; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5200 MHz; σ =4.688S/m;ε r = 36 .9 99; ρ = 1000 kg/m 3 Ambient Temperature：22.2 °C; Liquid Temperature：22.0 °C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.8, 5.8, 5.8); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Bottom-ANTB/Area Scan (6x12x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.296 W/kg Bottom-ANTB/Zoom Scan (9x9x16)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 4.658 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 3.97 W/kg SAR(1 g) = 0.633 W/kg; SAR(10 g) = 0.170 W/kg Maximum value of SAR (measured) = 1.49 W/kg Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/5 5.3GWIFI DUT:FLEX 12B Communication System: 802.11a; Frequency: 5300 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5300 MHz; σ =4 .81S/m; ε r = 36.791; ρ = 1000 kg/m 3 Ambient Temperature：22.2 °C; Liquid Temperature：22.0 °C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.8, 5.8, 5.8); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Bottom-ANTB/Area Scan (6x12x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.344 W/kg Bottom-ANTB/Zoom Scan (9x9x16)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 2.550 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 3.38 W/kg SAR(1 g) = 0.593 W/kg; SAR(10 g) = 0.166 W/kg Maximum value of SAR (measured) = 1.36 W/kg Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/6 5.6GWIFI DUT: FLEX 12B Communication System: 8 02.11a; Frequency: 5580 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5580 MHz; σ =5.153S/m;ε r = 36 .1 61; ρ = 1000 kg/m 3 Ambient Temperature：22.5 °C; Liquid Temperature：22.3 °C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.2, 5.2, 5.2); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Bottom-ANTB/Area Scan (6x12x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.368 W/kg Bottom-ANTB/Zoom Scan (9x9x16)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 5.476 V/m; Power Drift = -0.06 dB Peak SAR (extrapolated) = 5.02 W/kg SAR(1 g) = 0.762 W/kg; SAR(10 g) = 0.214 W/kg \Maximum value of SAR (measured) = 1.72 W/kg Test Laboratory: Shenzhen EMTEK Co.,Ltd.Date: 2023/12/7 5.8GWIFI DUT: FLEX 12B Communication System: 8 02.11a; Frequency: 5785 MHz;Duty Cycle: 1:1 Medium: H5G Medium parameters used: f = 5785 MHz; σ =5.396S/m;ε r = 35 .7 42; ρ = 1000 kg/m 3 Ambient Temperature：21.6 °C; Liquid Temperature：21.4°C DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(5.29, 5.29, 5.29); Calibrated: 2023/5/17; - Sensor-Surface: 2mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2023/4/25 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Bottom-ANTB/Area Scan (6x12x1):Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.388 W/kg Bottom-ANTB/Zoom Scan (9x9x16)/Cube 0:Measurement grid: dx=4mm, dy=4mm, dz=2mm Reference Value = 5.126 V/m; Power Drift = -0.18 dB Peak SAR (extrapolated) = 5.01 W/kg SAR(1 g) = 0.780 W/kg; SAR(10 g) = 0.219 W/kg Maximum value of SAR (measured) = 1.71 W/kg

ReportNo.ENS2311230096W00507RPage 1 of 50 Ver.1.0 TESTREPORT ProductName:Tablet ModelNumber:FLEX12B FCCID:O86-FLEX12B Preparedfor:MobileDemand,LC Address:1501BoysonSquareDrive,Suite101,Hiawatha, Iowa,UnitedStates Preparedby:EMTEK(SHENZHEN)CO.,LTD. Address:Bldg69,MajialongIndustryZone,NanshanDistrict, Shenzhen,Guangdong,China Tel:(0755)26954280 Fax:(0755)26954282 ReportNumber:ENS2311230096W00507R Date(s)ofTests:December04,2023toDecember07,2023 DateofIssue:December08,2023 ReportNo.ENS2311230096W00507RPage 2 of 50 Ver.1.0 TABLEOFCONTENTS 1.TESTRESULTCERTIFICATION.............................................................................................................................4 2.DescriptionofEquipmentUnderTest..................................................................................................................6 3.SARMeasurementSystem....................................................................................................................................7 3.1DefinitionofSpecificAbsorptionRate(SAR).....................................................................................................7 3.2SPEAGDASYSystem.....................................................................................................................................7 3.2.1Robot..................................................................................................................................................8 3.2.2Probes................................................................................................................................................9 3.2.3DataAcquisitionElectronics(DAE)....................................................................................................9 3.2.4Phantoms..........................................................................................................................................10 3.2.5DeviceHolder...................................................................................................................................11 3.2.6SystemValidationDipoles................................................................................................................11 3.2.7TissueSimulatingLiquids.................................................................................................................12 3.3SARSystemVerification.................................................................................................................................14 3.4SARMeasurementProcedure.......................................................................................................................15 3.4.1Area&ZoomScanProcedure..........................................................................................................15 3.4.2VolumeScanProcedure....................................................................................................................15 3.4.3PowerDriftMonitoring......................................................................................................................16 3.4.4SpatialPeakSAREvaluation...........................................................................................................16 3.4.5SARAveragedMethods...................................................................................................................16 4.SARMeasurementEvaluation..............................................................................................................................17 4.1ApplicableStandards......................................................................................................................................17 4.2EUTConfigurationandSetting.......................................................................................................................17 4.3EUTTestingPosition......................................................................................................................................19 4.3.1BodyExposureConditions...............................................................................................................19 4.3.2SARTestExclusionEvaluations.......................................................................................................21 4.4TissueVerification...........................................................................................................................................24 4.5SystemValidation...........................................................................................................................................24 4.6SystemVerification.........................................................................................................................................25 4.7MaximumOutputPower.................................................................................................................................26 4.7.1MaximumConductedPower............................................................................................................26 4.7.2MeasuredConductedPowerResult.................................................................................................27 4.8SARTestingResults.......................................................................................................................................33 4.8.1SARTestReductionConsiderations................................................................................................33 4.8.2SARResultsforBodyExposureCondition......................................................................................34 4.8.32.4GHz802.11g/nOFDMSARTestExclusionConsideration:........................................................37 4.8.4SARMeasurementVariability...........................................................................................................38 4.8.5EstimatedSARCalculation..............................................................................................................39 4.8.6<SARSummationAnalysis…

Text truncated - open the document above for the full version.

2.4~2.5/5.15~5.85/ 5.9~7.2 GHz 东莞市森岭智能科技有限公司 变更记录 MODIFICATION RECORD SHEET 版本 （REV.) 更改日期 （Modification date ） 更改内容描述（Summary of modification content） 拟制（ Signature ）批准（ Approval ） X12023.11.14 初版发行（First Issue）胡赵海（Jerry） 朱正锐(Jongrei) DONGGUAN SLEing INTEL-TECH CO.,LTD X22023.11.21 修改FPC及线长 胡赵海（Jerry） 朱正锐(Jongrei) 东莞市森岭智能科技有限公司 承认书项目表（Spec Item ） 序号 (N0.) 项目(Project)备注(Remark) 页码 (Page) 1承认书封面（Spec Cover） 1 2 变更记录（ MODIFICATION RECORD SHEET ） 2 3承认书项目表（Spec Item ） 3 4工程成品图（Drawing） 4 5电性测试报告（Test Reports ） 5 6 天线组装图（Antenna assembly diagram）6 7S 参数测试（S Parameter Test） 7 8 测试设备（Test Setup） 8 9 测试效率 (Test Efficiency) Give clear indication of: 1. The contents of the acknowledgement shall be arranged in order according to the items in the check sheet. 2. The number of copies of the acceptance letter shall be printed according to the customer's requirements, and the SGS report shall be stamped with the engineering seal. 3. All materials shall be confirmed by the customer. Any material/process/changes that may affect product quality and environmental quality must be re-sent to the customer for confirmation before import. 4. SGS report is valid for one year. 5. According to the contents attached to the actual acknowledgement, check the check form: "Yes" is provided, "no" is provided according to customer requirements. DONGGUAN SLEing INTEL-TECH CO.,LTD 9 ⭥ᙗ⍻䈅ᣕ੺ Test Reports Electrical Properties Frequency 2.4~2.55.15~5.85/ 5.9~7.2GHz() Impedance50 0hm Nominal V.S.W.Rİ 1.92 Return Loss-10 dB Max RadiationOmni-directional Gain (Peak) 2±0.5 dBi PolarizationLinear, Vertical Admitted Power2 W Connector MHF Physical Properties Antenna MaterialFPCB Cable Type Ï0.81mm Grey Operating Temp. -40~+85 °C Storage Temp. -5~+30 °C 东莞市森岭智能科技有限公司 DONGGUAN SLEing INTEL-TECH CO.,LTD T ⍪㔘㳳孽 6 3DUDPHWHU7HVW $JLOHQW (& 1HWZRUN $QDO\]HU :L)L 回波损耗 $QWHQQD 12 东莞市森岭智能科技有限公司 DONGGUAN SLEing INTEL-TECH CO.,LTD 东莞市森岭智能科技有限公司 测试设备 Test Setup DONGGUAN SLEing INTEL-TECH CO.,LTD 第 8 页 ⍻䈅᭸⦷ 7HVW (IILFHQF\ 东莞市森岭智能科技有限公司 DONGGUAN SLEing INTEL-TECH CO.,LTD

2.4~2.5/5.15~5.85/ 5.9~7.2 GHz 东莞市森岭智能科技有限公司 变更记录 MODIFICATION RECORD SHEET 版本 （REV.) 更改日期 （Modification date ） 更改内容描述（Summary of modification content） 拟制（ Signature ）批准（ Approval ） X12023.11.14 初版发行（First Issue）胡赵海（Jerry） 朱正锐(Jongrei) DONGGUAN SLEing INTEL-TECH CO.,LTD X22023.1 1.21 修改FPC 胡赵海（Jerry） 朱正锐(Jongrei) 东莞市森岭智能科技有限公司 承认书项目表（Spec Item ） 序号 (N0.) 项目(Project)备注(Remark) 页码 (Page) 1承认书封面（Spec Cover） 1 2 变更记录（ MODIFICATION RECORD SHEET ） 2 3承认书项目表（Spec Item ） 3 4工程成品图（Drawing） 4 5电性测试报告（Test Reports ） 5 6 天线组装图（Antenna assembly diagram）6 7S 参数测试（S Parameter Test） 7 8 测试设备（Test Setup） 8 9 测试效率 (Test Efficiency) Give clear indication of: 1. The contents of the acknowledgement shall be arranged in order according to the items in the check sheet. 2. The number of copies of the acceptance letter shall be printed according to the customer's requirements, and the SGS report shall be stamped with the engineering seal. 3. All materials shall be confirmed by the customer. Any material/process/changes that may affect product quality and environmental quality must be re-sent to the customer for confirmation before import. 4. SGS report is valid for one year. 5. According to the contents attached to the actual acknowledgement, check the check form: "Yes" is provided, "no" is provided according to customer requirements. DONGGUAN SLEing INTEL-TECH CO.,LTD 9 ⭥ᙗ⍻䈅ᣕ੺ Test Reports Electrical Properties Frequency 2.4~2.5/5.15~5.85/ 5.9~7.2GHz() Impedance50 0hm Nominal V.S.W.Rİ 1.92 Return Loss-1…

Text truncated - open the document above for the full version.