OBMALPHA-1-147ALPHANUMERIC PAGER

The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. This report shall not be reproduced except in full without prior authorization from Intertek Testing Services Hong Kong Limited Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2745 8306 Cirkisys Electronics Ltd. Application For Certification (FCC ID: OBMALPHA-1-147) Superheterodyne Receiver WO# 99044412 WN/at May 27, 1999 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 LIST OF EXHIBITS INTRODUCTION EXHIBIT 1:General Description EXHIBIT 2:System Test Configuration EXHIBIT 3:Emission Results EXHIBIT 4:Equipment Photographs EXHIBIT 5:Product Labelling EXHIBIT 6:Technical Specifications EXHIBIT 7:Instruction Manual EXHIBIT 8:Miscellaneous Information INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 i MEASUREMENT/TECHNICAL REPORT Cirkisys Electronics Ltd. - MODEL: ALPHA - ONE 6015N FCC ID: OBMALPHA-1-147 This report concerns (check one:)Original Grant X Class II Change _____ Equipment Type: Superheterodyne Receiver (example: computer, printer, modem, etc.) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)?Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37?Yes No X If no, assumed Part 15, Subpart B for unintentional radiator - the new 47 CFR [10-1-96 Edition] provision. Report prepared by:Wilbur Ng Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576, Castle Peak Road, Kowloon, Hong Kong Phone:852-2173-8502 Fax:852-2745-8306 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 ii Table of Contents 1.0 General Description.............................................................................................................2 1.1 Product Description............................................................................................................2 1.2 Related Submittal(s) Grants................................................................................................2 1.3 Test Methodology ..............................................................................................................3 1.4 Test Facility .......................................................................................................................3 2.0 System Test Configuration..................................................................................................5 2.2 EUT Exercising Software...................................................................................................5 2.4 Equipment Modification ....................................................................................................6 3.0 Emission Results ..................................................................................................................8 3.1 Field Strength Calculation ..................................................................................................9 3.2 Radiated Emission Configuration Photograph ..................................................................10 3.3 Radiated Emission Data ...................................................................................................11 4.0 Equipment Photographs ...................................................................................................14 5.0 Product Labelling..............................................................................................................16 6.0 Technical Specifications ....................................................................................................18 7.0 Instruction Manual ...........................................................................................................20 8.0 Miscellaneous Information................................................................................................22 8.2 Discussion of Pulse Desensitization .................................................................................23 8.3 Calculation of Average Factor..........................................................................................24 8.4 Emissions Test Procedures ...............................................................................................25 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 iii List of attached file Exhibit typeFile Descriptionfilename Cover LetterLetter of Agencyletter.pdf Test ReportTest Reportreport.doc Operation DescriptionTechnical Descriptiondescri.pdf Test Setup PhotoRadiated Emissionradiated1.jpg, radiated2.jpg External PhotoExternal Photoophoto1.jpg to ophoto2.jpg Internal PhotoInternal Photoiphoto1.jpg to iphoto4.jpg Block DiagramBlock Diagramblock.pdf SchematicsCircuit Diagramcircuit.pdf ID Label/LocationLabel Artwork and Locationlabel.pdf User ManualUser Manualmanual.pdf INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 0 EXHIBIT 1 GENERAL DESCRIPTION INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 1 1.0General Description 1.1Product Description The Equipment Under Test (EUT) is a POCSAG alpha-numeric pager operating at 143 - 151 MHz. The EUT is powered by a 1.5V “AAA” battery. It can operate from 143 MHz to 151 MHz by choosing corresponding value of channel crystal X1. It has two buttons and 16-characters (14-segment type) LCD display. The message will be displayed on the LCD glass and will scroll if more than 16 characters. When a new user message is being received, the pager will give an alert signal, such as buzzing sound or vibration form vibrator. For electronic filing, the brief circuit description is saved with filename: descri.pdf 1.2Related Submittal(s) Grants This is an application for Certification of a receiver. INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 2 1.3Test Methodolo…

Text truncated - open the document above for the full version.

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report shall not be reproduced except in full without prior authorization from Intertek Testing Services Hong Kong Limited Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2745 8306 Cirkisys Electronics Ltd. Application For Certification (FCC ID: OBMALPHA-1-147) Superheterodyne Receiver WO# 99044412 WN/at May 27, 1999 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1:General Description EXHIBIT 2:System Test Configuration EXHIBIT 3:Emission Results EXHIBIT 4:Equipment Photographs EXHIBIT 5:Product Labelling EXHIBIT 6:Technical Specifications EXHIBIT 7:Instruction Manual EXHIBIT 8:Miscellaneous Information INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 ii MEASUREMENT/TECHNICAL REPORT Cirkisys Electronics Ltd. - MODEL: ALPHA - ONE 6015N FCC ID: OBMALPHA-1-147 This report concerns (check one:)Original Grant X Class II Change _____ Equipment Type: Superheterodyne Receiver (example: computer, printer, modem, etc.) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)?Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37?Yes No X If no, assumed Part 15, Subpart B for unintentional radiator - the new 47 CFR [10-1-96 Edition] provision. Report prepared by:Wilbur Ng Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576, Castle Peak Road, Kowloon, Hong Kong Phone:852-2173-8502 Fax:852-2745-8306 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 iii Table of Contents 1.0 General Description ............................................................................................................2 1.1 Product Description ...........................................................................................................2 1.2 Related Submittal(s) Grants ...............................................................................................2 1.3 Test Methodology ..............................................................................................................3 1.4 Test Facility .......................................................................................................................3 2.0 System Test Configuration .................................................................................................5 2.2 EUT Exercising Software ..................................................................................................5 2.4 Equipment Modification ....................................................................................................6 3.0 Emission Results ..................................................................................................................8 3.1 Field Strength Calculation..................................................................................................9 3.2 Radiated Emission Configuration Photograph .................................................................10 3.3 Radiated Emission Data...................................................................................................11 4.0 Equipment Photographs ...................................................................................................14 5.0 Product Labelling ..............................................................................................................16 6.0 Technical Specifications ....................................................................................................18 7.0 Instruction Manual ...........................................................................................................20 8.0 Miscellaneous Information ...............................................................................................22 8.2 Discussion of Pulse Desensitization.................................................................................23 8.3 Calculation of Average Factor .........................................................................................24 8.4 Emissions Test Procedures...............................................................................................25 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 iv List of attached file Exhibit typeFile Descriptionfilename Cover LetterLetter of Agencyletter.pdf Test ReportTest Reportreport.doc Operation DescriptionTechnical Descriptiondescri.pdf Test Setup PhotoRadiated Emissionradiated1.jpg, radiated2.jpg External PhotoExternal Photoophoto1.jpg to ophoto2.jpg Internal PhotoInternal Photoiphoto1.jpg to iphoto4.jpg Block DiagramBlock Diagramblock.pdf SchematicsCircuit Diagramcircuit.pdf ID Label/LocationLabel Artwork and Locationlabel.pdf User ManualUser Manualmanual.pdf INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 1 EXHIBIT 1 GENERAL DESCRIPTION INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 2 1.0 General Description 1.1Product Description The Equipment Under Test (EUT) is a POCSAG alpha-numeric pager operating at 143 - 151 MHz. The EUT is powered by a 1.5V “AAA” battery. It can operate from 143 MHz to 151 MHz by choosing corresponding value of channel crystal X1. It has two buttons and 16-characters (14-segment type) LCD display. The message will be displayed on the LCD glass and will scroll if more than 16 characters. When a new user message is being received, the pager will give an alert signal, such as buzzing sound or vibration form vibrator. For electronic filing, the brief circuit description is saved with filename: descri.pdf 1.2Related Submittal(s) Grants This is an application for Certification of a receiver. INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 3 1.3Test Methodo…

Text truncated - open the document above for the full version.

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report shall not be reproduced except in full without prior authorization from Intertek Testing Services Hong Kong Limited Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2745 8306 Cirkisys Electronics Ltd. Application For Certification (FCC ID: OBMALPHA-1-147) Superheterodyne Receiver WO# 99044412 WN/at May 27, 1999 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1:General Description EXHIBIT 2:System Test Configuration EXHIBIT 3:Emission Results EXHIBIT 4:Equipment Photographs EXHIBIT 5:Product Labelling EXHIBIT 6:Technical Specifications EXHIBIT 7:Instruction Manual EXHIBIT 8:Miscellaneous Information INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 ii MEASUREMENT/TECHNICAL REPORT Cirkisys Electronics Ltd. - MODEL: ALPHA - ONE 6015N FCC ID: OBMALPHA-1-147 This report concerns (check one:)Original Grant X Class II Change _____ Equipment Type: Superheterodyne Receiver (example: computer, printer, modem, etc.) Deferred grant requested per 47 CFR 0.457(d)(1)(ii)?Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37?Yes No X If no, assumed Part 15, Subpart B for unintentional radiator - the new 47 CFR [10-1-96 Edition] provision. Report prepared by:Wilbur Ng Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576, Castle Peak Road, Kowloon, Hong Kong Phone:852-2173-8502 Fax:852-2745-8306 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 iii Table of Contents 1.0 General Description ............................................................................................................2 1.1 Product Description ...........................................................................................................2 1.2 Related Submittal(s) Grants ...............................................................................................2 1.3 Test Methodology ..............................................................................................................3 1.4 Test Facility .......................................................................................................................3 2.0 System Test Configuration .................................................................................................5 2.2 EUT Exercising Software ..................................................................................................5 2.4 Equipment Modification ....................................................................................................6 3.0 Emission Results ..................................................................................................................8 3.1 Field Strength Calculation..................................................................................................9 3.2 Radiated Emission Configuration Photograph .................................................................10 3.3 Radiated Emission Data...................................................................................................11 4.0 Equipment Photographs ...................................................................................................14 5.0 Product Labelling ..............................................................................................................16 6.0 Technical Specifications ....................................................................................................18 7.0 Instruction Manual ...........................................................................................................20 8.0 Miscellaneous Information ...............................................................................................22 8.2 Discussion of Pulse Desensitization.................................................................................23 8.3 Calculation of Average Factor .........................................................................................24 8.4 Emissions Test Procedures...............................................................................................25 INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 iv List of attached file Exhibit typeFile Descriptionfilename Cover LetterLetter of Agencyletter.pdf Test ReportTest Reportreport.doc Operation DescriptionTechnical Descriptiondescri.pdf Test Setup PhotoRadiated Emissionradiated1.jpg, radiated2.jpg External PhotoExternal Photoophoto1.jpg to ophoto2.jpg Internal PhotoInternal Photoiphoto1.jpg to iphoto4.jpg Block DiagramBlock Diagramblock.pdf SchematicsCircuit Diagramcircuit.pdf ID Label/LocationLabel Artwork and Locationlabel.pdf User ManualUser Manualmanual.pdf INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 1 EXHIBIT 1 GENERAL DESCRIPTION INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 2 1.0 General Description 1.1Product Description The Equipment Under Test (EUT) is a POCSAG alpha-numeric pager operating at 143 - 151 MHz. The EUT is powered by a 1.5V “AAA” battery. It can operate from 143 MHz to 151 MHz by choosing corresponding value of channel crystal X1. It has two buttons and 16-characters (14-segment type) LCD display. The message will be displayed on the LCD glass and will scroll if more than 16 characters. When a new user message is being received, the pager will give an alert signal, such as buzzing sound or vibration form vibrator. For electronic filing, the brief circuit description is saved with filename: descri.pdf 1.2Related Submittal(s) Grants This is an application for Certification of a receiver. INTERTEK TESTING SERVICES FCC ID: OBMALPHA-1-147 3 1.3Test Methodo…

Text truncated - open the document above for the full version.