OC3BM1842Bluetooth module

NVC-MDCS42 Datasheet V2.1 NovaComm Technologies Confidential NVC-MDCS42 Datasheet – Class2 Bluetooth V2.1 Innovative Communication in Wireless World Version –V 2.1 Issue Date – Jan. 25, 2012 NVC-MDCS42 Datasheet V2.1 NovaComm Technologies Confidential Page 2 of 30 Copyright © 2012 NovaComm Technologies All rights reserved. NovaComm Technologies assumes no responsibility for any errors, which may appear in this manual. Furthermore, NovaComm Technologies reserves the right to alter the hardware, software, and/or specifications detailed herein at any time without notice, and do not make any commitment to update the information contained herein. The iNova ® and iNovaLE ® is registered trademark of NovaComm Technologies. The Bluetooth trademark is owned by the Bluetooth SIG Inc., USA, and is licensed to NovaComm Technologies. All other trademarks listed herein are owned by their respective owners. FCC and CE Caution NovaComm Technologies FCC Caution: § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. * RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. The module is designed to comply with the FCC statements. The Host system using the module, should have label indicated "Contains FCC ID: OC3BM1842". CE Caution: The module is designed to comply the CE statements. The host system using the module, should have label indicated “” NVC-MDCS42 Datasheet V2.1 NovaComm Technologies Confidential Page 3 of 30 Description: NVC-MDCS42 is a class 2 Bluetooth® 2.1 module. It is a highly integrated and sophisticated module which contains all the necessary elements from radio to antenna and a fully implemented protocol stack. It is an idea solution for integrating Bluetooth® into various products with limited knowledge of Bluetooth® and RF technologies. With NovaComm’s iNova® bluetooth stack firmware, designers can easily customize their applications to support different Bluetooth profiles, such as SPP, OPP, HID and etc. And the module can also interface with Apple’s Authentication Coprocessor and build an iAP over Bluetooth application. Please contact NovaComm for special firmware. . Typical Bluetooth applications:  Cable replacement  Bar code and RFID scanners  Measurement and monitoring systems  Industrial sensors and controls  Medical devices  Industrial PCs and laptops Features:  Bluetooth V2.1 (class2)  Onboard Meander line PCB antenna support 10 meters  Support sniff and deep sleep mode  Supports master and slave  Supports Bluetooth profiles SPP, OPP, HID )  UART and USB programming and data interfaces  I2C Master interface  Support Apple iAP protocol (with special firmware)  PCM digital audio interfaces  8MBit onboard flash  25.80x13.40x2.2mm  BQB/FCC/CE Certified  RoHS compliant Table 1 Ordering Information Ordering Number Package Items in One Package Comments NVC-MDCS42 Plastic tray 84 PCS Please also supply the customer firmware code issued by NovaComm Technologies when you place the order. NVC-MDCS42 Datasheet V2.1 NovaComm Technologies Confidential Page 4 of 30 Table of Contents 1.1. Pin Configuration ......................................................................................................................................... 6 2. Electrical Characteristic .................................................................................................................................. 8 2.1. Absolute Maximum Rating ......................................................................................................................... 8 2.2. Recommend operation conditions ............................................................................................................ 8 2.3. Power consumptions .................................................................................................................................. 8 2.4. Input/output Terminal Characteristics ...................................................................................................... 9 2.4.1. Digital Terminals .................................................................................................................................. 9 2.4.2. USB ....................................................................................................................................................... 9 3. Physical Interfaces ..........…

Text truncated - open the document above for the full version.

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 July 10, 2012 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: OC3BM1842 We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature Client’s name / title Feng Wang Address: 902A, #560 Shengxia Rd., ZJ Inno Park, Shanghai 201203, China Tel: 021-60453799 E-mail: [email protected]

SCS-F26 Modular Approval Letter Page 1 of 2 Rev 7.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Modular Approval Declaration Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (Obsolete) 1.0 1.0 Dec-04-2006 Added IC Modular Letter (Obsolete) 1.0 2.0 Feb 16 2009 Add LMA and MA option (Obsolete) 2.0 3.0 April 14 2010 Revised per RSS Gen issue 3.0 (Obsolete) 3.0 4.0 Jan 12 2011 Removed Foot(2) (obsolete) 4.0 5.0 July 19 2011 Adding New note per KDB996369 D01 V01R03 (obsolete) 5.0 6.0 August 29 2011 Updated company template & Added text box (current) 6.0 7.0 Jan-31-2012 SCS-F26 Modular Approval Letter Page 2 of 2 Rev 7.0 July 10, 2012 NVC-MDCS42 FCC ID : OC3BM1842 , is seeking FCC Authorization as a Single Modular transmitter / Single Limited Modular Approval (Please check one). The EUT meets the requirements for Single Modular approval / Single Limited Modular Approval (please check one) as detailed in FCC public Notice DA00-1407. Compliance to each of the requirements is described below: Questions are: * Please provide a detailed explanation if the answer is “No.” 1. “The modular transmitter must have its own RF shielding.” Yes / No 2. “The modular transmitter must have buffered modulation/data inputs.” Yes / No 3. “The modular transmitter must have its own power supply regulation.” Yes / No 4. “The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c).” Yes / No 5. “The modular transmitter must be tested in a stand-alone configuration.” Yes / No 6. “The modular transmitter must be labeled with its own FCC ID number.” Yes / No 7. “The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacture must provide adequate instruction along with the module to explain any such requirements.” Yes / No 8. “The modular transmitter must comply with any applicable RF exposure requirements.” Yes / No Note: (1) LMA may be granted when one or more of the requirements in the table above cannot be demonstrated. LMA will also be issued in those instances where applicants can demonstrate that they will retain control over the final installation of the device, such that compliance of the end product is assured. In such cases, an operating condition on the LMA for the module must state that the module is only approved for use when installed in devices produced by a specific manufacturer. When LMA is sought, the application for equipment certification must specifically state how control of the end product into which the module will be installed, and will be maintained, such that full compliance of the end product is always ensured. (2) Please provide Clear and specific instructions describing the conditions, limitations and procedures for third-parties to use and/or integrate the module into a host device. (3) For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description of how such control is implemented to ensure prevention of third party modification must be provided (see KDB 594280). Note 1: Compliance of a module in its final configuration is the responsibility of the applicant. A host device will not be considered certified if the instructions regarding antenna configuration provided in the original description, of one or more separately certified modules it contains, were not followed. Example: A separately certified low-power transceiver module using Bluetooth technology which is housed in a desktop computer, laptop or peripheral does not require the overall system to be recertified, if the desktop computer, laptop or peripheral, as a stand-alone unit, complies with all applicable technical standards. Client’s signature Client’s name / title Feng Wang Address: 902A, #560 Shengxia Rd., ZJ Inno Park, Shanghai 201203, China Tel: 021-60453799 E-mail: [email protected]

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Certification File update Authorization Letter SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 3.0 August 6, 2012 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Certification File update Authorization Letter Product name: Bluetooth module model name: NVC-MDCS42 FCC ID：OC3BM1842 We, NovaComm Technologies Inc hereby authorize SIEMIC, INC. to act as a Certification Body for modifying for the following file(s): 1. External photo 2. Test report The original External photo on file has the bluetooth module and adapter plate together. Now we need the photo for bluetooth module to only show the module without the adapter plate. Please kindly help to update and replace it with the original photo on the test report. Would you please, have any inquiries, please, do not hesitate to contact us. Sincerely, Client’s signature Client’s name / title Feng Wang Address: 902A, #560 Shengxia Rd., ZJ Inno Park, Shanghai 201203, China Tel: 021-60453799 E-mail: [email protected]

Annex B. EUT External Photo EUT - Front View EUT - Rear View

Explanation: As shown in the box behind the dotted yellow line is label location. Label location

Annex B. EUT Internal Photo Uncover Without Shielding - Front View Uncover Without Shielding – Rear View

FCC ID : OCS3BM1842 Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB 447498 (2)(a)(i) Frequency Range Low Frequency (MHz) High Frequency(MHz) Center frequency (MHz) 60/f SAR Limitation (mw) 2402 2480 2441 24.58 Maximum measured transmitter power Conducted Power (mw) Max Antenna Gain (dBi) EIRP (mw) 2.31 1 2.91 Threshold at which no SAR required is 24.58 mw. Maximum Tx power is 2.91mw EIRP. Conclusion: No SAR is required. SIMULTANEOUS TRANSMISSION EVALUATION N/A

NovaComm Technologies Inc Bluetooth module Main Model: NVC-MDCS42 Serial Model: N/A July 25, 2012 Report No.: 12020543-FCC-R1 (This report supersedes NONE) Modifications made to the product : None This Test Report is Issued Under the Authority of: Alan Lv Compliance Engineer Alex Liu Technical Manager This test report may be reproduced in full only. Test result presented in this test report is applicable to the representative sample only. Title: RF Test Report for Bluetooth module Main Model: NVC-MDCS42 Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4 :2003 Report No: 12020543-FCC-R1 Issue Date: July 25, 2012 Page: 2 of 47 www.siemic.com.cn Laboratory Introduction SIEMIC, headquartered in the heart of Silicon Valley, with superior facilities in US and Asia, is one of the leading independent testing and certification facilities providing customers with one-stop shop services for Compliance Testing and Global Certifications. In addition to testing and certification, SIEMIC provides initial design reviews and compliance management through out a project. Our extensive experience with China, Asia Pacific, North America, European, and international compliance requirements, assures the fastest, most cost effective way to attain regulatory compliance for the global markets . Accreditations for Conformity Assessment Country/Region Accreditation Body Scope USA FCC, A2LA EMC , RF/Wireless , Telecom Canada IC, A2LA, NIST EMC, RF/Wireless , Telecom Taiwan BSMI , NCC , NIST EMC, RF, Telecom , Safety Hong Kong OFTA , NIST RF/Wireless ,Telecom Australia NATA, NIST EMC, RF, Telecom , Safety Korea KCC/RRA, NIST EMI, EMS, RF , Telecom, Safety Japan VCCI, JATE, TELEC, RFTEMI, RF/Wireless, Telecom Mexico NOM, COFETEL, Caniety Safety, EMC , RF/Wireless, Telecom Europe A2LA, NIST EMC, RF, Telecom , Safety Accreditations for Product Certifications Country/Region Accreditation Body Scope USA FCC TCB, NIST EMC , RF , Telecom Canada IC FCB , NIST EMC , RF , Telecom Singapore iDA, NIST EMC , RF , Telecom EU NB EMC & R&TTE Directive Japan MIC, (RCB 208) RF , Telecom Hong Kong OFTA (US002) RF , Telecom Title: RF Test Report for Bluetooth module Main Model: NVC-MDCS42 Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4 :2003 Report No: 12020543-FCC-R1 Issue Date: July 25, 2012 Page: 3 of 47 www.siemic.com.cn This page has been left blank intentionally. Title: RF Test Report for Bluetooth module Main Model: NVC-MDCS42 Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4 :2003 Report No: 12020543-FCC-R1 Issue Date: July 25, 2012 Page: 4 of 47 www.siemic.com.cn CONTENTS 1 EXECUTIVE SUMMARY & EUT INFORMATION ..........................................................................................5 2 TECHNICAL DETAILS .........................................................................................................................................6 3 MODIFICATION.....................................................................................................................................................7 4 TEST SUMMARY....................................................................................................................................................8 5 MEASUREMENTS, EXAMINATION AND DERIVED RESULTS ..................................................................9 ANNEX A. TEST INSTRUMENT & METHOD ........................................................................................................36 ANNEX B. EUT AND TEST SETUP PHOTOGRAPHS ...........................................................................................41 ANNEX C. TEST SETUP AND SUPPORTING EQUIPMENT................................................................................42 ANNEX D. USER MANUAL / BLOCK DIAGRAM / SCHEMATICS / PART LIST ............................................46 ANNEX E. DECLARATION OF SIMILARITY ........................................................................................................47 Title: RF Test Report for Bluetooth module Main Model: NVC-MDCS42 Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4 :2003 Report No: 12020543-FCC-R1 Issue Date: July 25, 2012 Page: 5 of 47 www.siemic.com.cn 1 EXECUTIVE SUMMARY & EUT INFORMATION The purpose of this test programme was to demonstrate compliance of the NovaComm Technologies Inc, Bluetooth module and model: NVC-MDCS42 against the current Stipulated Standards. The Bluetooth module has demonstrated compliance with the FCC 15.247: 2012, ANSI C63.4 :2003. EUT Information EUT Description : Bluetooth module Main Model : NVC-MDCS42 Serial Model : N/A Antenna Gain : Bluetooth: 1 dBi Input Power : The control board power supply： DC 3.3V Classification Per Stipulated Test Standard : FCC 15.247: 2012, ANSI C63.4 :2003 Title: RF Test Report for Bluetooth module Main Model: NVC-MDCS42 Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4 :2003 Report No: 12020543-FCC-R1 Issue Date: July 25, 2012 Page: 6 of 47 www.siemic.com.cn 2 TECHNICAL DETAILS Purpose Compliance testing of Bluetooth module with stipulated standard Applicant / Client NovaComm Technologies Inc 902A, #560 Shengxia Rd. , ZJ Inno Park, Shanghai 201203, China Manufacturer NovaComm Technologies Inc 902A, #560 Shengxia Rd， ZJ Inno Park, Shanghai 201203, China Laboratory performing the tests SIEMIC Nanjing (China) Laboratories NO.2-1,Longcang Dadao, Yuhua Economic Development Zone, Nanjing, China Tel:+86(25)86730128/86730129 Fax:+86(25)86730127 Email:[email protected] Test report reference number 12020543-FCC-R1 Date EUT received July 9, 2012 Standard applied FCC 15.247: 2012, ANSI C63.4 :2003 Dates of test (from – to) July 10 to July 17 2012 No of Units #1 Equipment Category DSS Trade Name RF Operating Frequency (ies) Bluetooth: 2402-2480MHz Number of Channels Bluetooth: 79 CH Modulation Bluetooth: GFSK FCC ID OCS3BM1842 Title: RF Test Report for Bluetooth module Main Model: NVC-MDCS42 Main Model: N/A To: FCC 15.247: 2012, ANSI C63.4 :2003 Report No: 12020543-FCC-R1 Issue Date: July 25, 2012 Page: 7…

Text truncated - open the document above for the full version.

Annex B. Test Setup Photo Conducted Emissions Test Setup - Front View Conducted Emissions Test Setup - Side View Radiated Spurious Emissions Test Setup Below 1GHz - Front View Radiated Spurious Emissions Test Setup Above 1GHz - Front View