ODCHW-390M2.4G Wireless Headset

HW-390M HW-390M User manual guide for 2.4G Wireles (Work with X BOX 360/PS3/WII/MAC/TV)PC/ s Transmission S stem yy Features Interfaces: Transmitter: 1. 3.5mm audio input 2. Mini USB port 3. Working indicator light Connections: A. The left part of headset B. The right part of headset 1.The HW-390M is a 2.4Ghz wireless headset, specially designed for use with X BOX 360 and PS3. The transmitter has a built-in Microsoft approved non-driver USB sound card and adopts a pure-digit decoding system. You can hear both game sounds and the chat through headset courtesy of the special circuit design and in built amplifier. Hear chat in real-time overlayed with stereo game sounds. Use volume buttons on the headset to adjust the volume.. 2. Digital wireless technology allows you to operate the headphones at a distance of up to 10 meters from the transmitter – allowing you freedom to move around without wires while playing games. The headset can be used for up to 8 hours between charges. 3. The headphones fit snugly over your ears sealing in sounds so you can play games at reasonable volumes without disturbing those nearby. High quality 40mm drivers deliver crystal clear sound quality and allow even low volume sounds to be heard during game play giving great advantage to the serious game player. 4. The headphones can also be used with WII, PC,MAC, and TV, for good stereo sound effects while playing games, watching movies and listening to music. It is plug-and-play and fully supports USB2., 5. The microphone is detachable, and can be removed if not being used.. 1. 3.5mm microphone interface 2. 3.5mm XBOX360 interface. 3.Working indicator light 4.Volume+ / Volume_ buttons 5. MIC mute button 1. Power on/off button 2. USB recharging port 3. Recharging indicator light. 1. Connect with PC: use the USB cable to connect the transmitter with PC as pictured below: Operation: Precautions: 2. Connect with PS3: Use RCA cable to connect with TV and transmitter: plug 3.5mm jack into 3.5mm hole of the transmitter, the white/red RCA plugs are connected with the corresponding interface of TV; Use the USB cable to connect with the transmitter and USB port of PS3 as pictured below: 3. Connect with X BOX 360: Use RCA cable to connect with TV and transmitter: plug 3.5mm jack into 3.5mm hole of the transmitter, the white/red RCA plugs are connected with the corresponding interface of TV; Use the USB cable to connect with the transmitter and USB port of XBOX360; Use the 2.5-3.5mm cable to connect the headset with the controller of XBOX360, 3.5mm plug connected with headset, 2.5mm plug connected with the controller of the XBOX360 as pictured below: 1. Use USB cable to connect the transmitter with the port of USB device such as PC, PS3, XBOX360, the working indicator light will be flashing. 2. Push the power toggle button on the right of headset to "on" position to power on the headset. If the headset and transmitter was paired successfully, the LED lights for both headset and transmitter will stop flashing; otherwise, the LED lights continue flashing. 3. How to pair the headset and transmitter: when you need to pair the headset and transmitter, please close the all applications on your PC, or exit MIC mode if using a PS3; please keep within 50 CM between the headset and the transmitter, press the MIC "Mute" button on the left earlap for 5 seconds to enter pairing mode, when the LED light on the left earlap of the headset is quickly flashing, release the button, after 5-10 seconds, the LED light stops flashing and stop flashing. This means the pairing is successful. When pairing is finished, don't press any keys wait for 6 seconds,power off the headset and then power it on again, the headset will auto pair with the transmitter and also auto save the pairing settings in the memory.. 4. On the left side of the headset, there are MIC mute button, game sounds and chat sounds adjustment buttons available. Press these buttons to adjust the volume. When MIC is on, press the mute button to mute the mic, press the button again to turn off mute. When you press and hold the game or chat volume button, it will go to the maximum or minimum level respectively. The last operation memory will be saved after you power off the Headset. 1.If the battery is depleted no LED will be shown when you attempt to power on. Charge the headset using the USB charging cable and continue charging until the red LED is no longer displayed. Charge time is approximately 3 hours.. 2.The headset will be paired to the transmitter as default using factory settings. If you need to re-pair the headset hold down the Mic Mute button until the LED flashes quickly. Once paired the LED will stop flashing. Wait for 6 seconds and power off the headset. Then power on and it will auto pair with the transmitter and save the pair to memory. Packaging contents: Headset : Specifications: Transmitter: 3. Low battery warning: when the voltage of the built-in battery is low, the LED light on the left side of headset will flash for 1 second, to remind you that the battery strength is low. 4. When you use the headset for PC/MAC, the game volume+, volume- cannot be used. Control volumes using the PC or Mac operating system. 5. When you use headset for WII/TV as an amplified headset,the chat Volume buttons will be disabled. 6. If no sound is heard on the headset – check all connections and also try pressing the volume buttons to increase the volume. 7. PC Trouble Shooting: Right click the speaker icon at the right down of PC screen by using the mouse, select "Adjust Audio Properties / volume / Sound playback default device / 2.4G WIRELESS HEADSET AND RECORD/2.4G WIRELESS HEADSET. After tick "default device only", click "apply/ confirm" to exit. Restart the PC with the headset connected. 1. Transmitter---------------1PCS 2. Wireless headset------------------1PCS 3. RCA-3.5 cable----------------------1PCS 4. USB-USB mini cable---------------1PCS 5. 3.5-2.5 cable------------------------1PCS(…

Text truncated - open the document above for the full version.

Confidentiality Request Letter Shenzhen Bada Sheng Electronic Co., Ltd. Add: Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Tel: 0755-86174580 Fax: 0755-86174027 2012-06-15 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Confidentiality Request regarding application for certification of FCC ID: ODCHW-390M We hereby request confidential treatment of information accompanying this application as outlined below: - Schematics Diagram - Block Diagram - Operation description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Client’s name / title : Wonderful Wang /Manager Contact information / address : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Tel: 0755-86174580 Fax: 0755-86174027 E-Mail: [email protected]

Shenzhen Bada Sheng Electronic Co., Ltd. Add: Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Tel: 0755-86174580 Fax: 0755-86174027 Date: 2012-06-16 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: ODCHW-390M To Whom It May Concern: This letter is to ascertain that Shenzhen Bada Sheng Electronic Co., Ltd., 2.4G Wireless Transmission Box has been the units used for conducting FCC compliance testing, the DoC part will be tested by FCC recognized test lab. If you have any question or concerns, pls. contact us. Sincerely Client’s name / title : Wonderful Wang /Manager Contact information / address : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Tel: 0755-86174580 Fax: 0755-86174027 E-Mail: [email protected]

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. EXTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 Fig.3

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: ODCHW-390M This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1 LABEL AND LOCATION Label Location (Size: L 4.0 cm x 2.5 cm) Trade Name: BADA Model: HW-390M This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: OD CHW-390M

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 4 1. INTERIOR PHOTOGRAPHS Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 4 Fig.3 Fig.4 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 4 Fig.5 Antenna Fig.6 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF ________________________________________________________________________________ _________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 4 Fig.7

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 34 RADIO TEST REPORT FOR Shenzhen Bada Sheng Electronic Co., Ltd 2.4G Wireless Headset Model No.: HW-390M Prepared for : Shenzhen Bada Sheng Electronic Co., Ltd Address : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 1F., Xingyuan Industrial Park, Tongda Road, Bao’an Blvd., Bao’an District, Shenzhen, Guangdong, China Date of receipt of test sample : May 08, 2011 Number of tested samples : 1 Serial number : Prototype Date of Test : May 08, 2011 – June 08, 2012 Date of Report : June 08, 2012 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 34 TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ............... : LCS120508041TF Date of Issue ................................. : June 08, 2012 Testing Laboratory Name.......... : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ......................................... : 1F., Xingyuan Industrial Park, Tongda Road, Bao’an Blvd., Bao’an District, Shenzhen, Guangdong, China Testing Location/ Procedure......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ....................... : Shenzhen Bada Sheng Electronic Co., Ltd Address ......................................... : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Test Specification Standard ........................................ : FCC CFR 47 PART 15 Subpart C: 2011, ANSI C63.4-2009 Test Report Form No. ................ : LCSEMC-1.0 TRF Originator ............................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF................................... : Dated 2011-03 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. ................ : 2.4G Wireless Headset Trade Mark ................................... : BADA Manufacturer ................................ : Shenzhen Bada Sheng Electronic Co., Ltd Model/ Type reference ................. : HW-390M Ratings .......................................... : DC 3.7V Result .......................................... : Positive Compiled by: Supervised by: Approved by: Ada Liang/ File administrators Vito Cao/ Technique principal Gavin Liang/ Manager SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 3 of 34 RADIO -- TEST REPORT Test Result: Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCS120508041TF June 08, 2012 Date of issue Type / Model........................... : HW-390M EUT......................................... : 2.4G Wireless Headset Applicant............................... : Shenzhen Bada Sheng Electronic Co., Ltd Address.................................. : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Shenzhen Bada Sheng Electronic Co., Ltd Address................................... : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Telephone............................... : / Fax.......................................... : / Factory................................... : Shenzhen Bada Sheng Electronic Co., Ltd Address................................... : Rm 10, 6/F, Fonda Ind. Bldg, 37-39 Au Pui Wan St., Fotan, Shatin, N.T. Hong Kong Telephone............................... : / Fax.......................................... : / SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 4 of 34 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION .................................................................................................... 5 1.1 Description of Device (EUT)...............................................................................................................5 1.2 Host System Configuration List and Details .......................................................................................5 1.3 External I/O Cable ...............................................................................................................................5 1.4 Description of Test Facility .................................................................................................................5 1.5 Statement of The Measurement Uncertainty .......................................................................................6 1.6 Measurement Uncertainty....................................................................................................................6 1.7 Description Of Test …

Text truncated - open the document above for the full version.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emission Measurement Fig.1 Fig.2 SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID:ODCHW-390M Report No.:LCS120508041TF _______________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 2 of 2 Fig.3