OJC6000-W916RT01

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 30 of 52 Exhibit 8 Exhibit 8: User’s Manual COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 31 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 32 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 33 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 34 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 35 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 36 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 37 of 52 Exhibit 8 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 38 of 52 Exhibit 8

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 50 of 51 Exhibit 13 Exhibit 13: Cover Letters May 3, 1999 FEDERAL COMMUNICATIONS COMMISSION Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Enclosed is a FCC Part 15 Section 15.249 Certification application for the Health Sense International Inc. Model 6000-4, FCC ID OJC6000-W916RT01. Please let me know if I can be of further assistance. Sincerely yours, COMMUNICATION CERTIFICATION LABORATORY Joseph W. Jackson V.P. Marketing COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 51 of 51 Exhibit 13 Request for Confidentiality

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 4 of 51 Exhibit 3 Exhibit 3: Photographs of Overall Appearance Front View of the 6000-4 with Senser’R Strip COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 5 of 51 Exhibit 3 Front View of the 6000-4 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 6 of 51 Exhibit 3 Front View of the 6000-4 with battery cover removed COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 7 of 51 Exhibit 3 Back View of the 6000-4 with Senser’R Strip COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 8 of 51 Exhibit 3 Back View of the 6000-4 without Senser’R Strip COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 9 of 51 Exhibit 3 Back View of the 6000-4 showing Senser’R Strip being installed

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 1 of 51 Exhibit 1 Exhibit 1: FCC ID Label Equipment Identification Label In accordance with the requirements of Sections 15.19 (a), 2.925 and 2.926 of the FCC Rules, the following information will be permanently affixed to the Health Sense International Inc. Model 6000-4 as shown in the photograph below. FCC ID: OJC6000-W916RT01 This device complies with FCC Rules Part 15. Operation is subject to the following two conditions. (1) This device may not cause harmful interference and 2) this device must accept any interference that may be received, including interference that may cause undesired operation. .75 1.50 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 2 of 51 Exhibit 1 Photograph showing label placement

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 38 of 51 Exhibit 9 Exhibit 9: Internal Photographs Inside view of the 6000-4 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 39 of 51 Exhibit 9 Front view of the test jig used to test the transmitter COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 40 of 51 Exhibit 9 Back view of the test jig used to test the transmitter COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 41 of 51 Exhibit 9 Front view of the transmitter and interface boards COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 42 of 51 Exhibit 9 Back view of the transmitter and interface boards COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 43 of 51 Exhibit 9 Front view of the transmitter board COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 44 of 51 Exhibit 9 Back view of the transmitter board COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 45 of 51 Exhibit 9 Front view of the interface board COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 46 of 51 Exhibit 9 Back view of the interface board

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 49 of 51 Exhibit 12 Exhibit 12: Operational Description '' 15.203 Antenna Requirements The 6000-4 uses an antenna that is soldered directly to the main board. The same type as specified by the manufacturer can only replace this antenna.

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 13 of 51 Exhibit 6 Exhibit 6: Test Report TEST REPORT FROM: COMMUNICATION CERTIFICATION LABORATORY 1940 W. Alexander Street Salt Lake City, Utah 84119-2039 Type of Report: Certification TEST OF: 6000-4 FCC ID: OJC6000-W916RT01 To FCC PART 15, Subpart C Section 15.249 Test Report Serial No: 73-6645 Applicant: Health Sense International Inc. 657 Newmark Avenue P.O. Box 293 Coos Bay, OR 97420 Date of Test: April 22, 1999 Issue Date: May 3, 1999 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 14 of 51 Exhibit 6 CERTIFICATION OF ENGINEERING REPORT This report has been prepared by Communication Certification Laboratory to determine compliance of the device described below with the notification requirements of FCC Part 15, Subpart C Section 15.249. This report may be reproduced in full, partial reproduction may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. -Applicant:Health Sense International Inc. - Manufacturer:Health Sense International Inc. -Trade Name:REDEEM -Model Number:6000-4 -FCC ID:OJC6000-W916RT01 On this 3 rd day of May 1999, I, individually, and for Communication Certification Laboratory, certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge, and are made in good faith. Although NVLAP has recognized that the Communication Certification Laboratory EMC testing facilities are in good standing, NVLAP does not endorse the product described in this report. COMMUNICATION CERTIFICATION LABORATORY Checked by: William S. Hurst, P.E. Vice President Tested by: Roger J. Midgley EMC Engineering Manager COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 15 of 51 Exhibit 6 SECTION 1.0 CLIENT INFORMATION 1.1 Client Information: Company Name: Health Sense International Inc. 657 Newmark Avenue P.O. Box 293 Coos Bay, OR 97420 Contact Name:Norman A. Roberts Title:Production & Engineering Manager COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 16 of 51 Exhibit 6 SECTION 2.0 EQUIPMENT UNDER TEST (EUT) 2.1 Identification of EUT: Trade Name:REDEEM Model Name or Number:6000-4 Serial Number:N/A Options Fitted:N/A Country of Manufacture:U.S.A. 2.2 Description of EUT: The REDEEM transmitter is a professional incontinence management system designed to sense a fluid release from patience in a nursing home or hospital. The transmitter (model 6000-4) is attached to a Sense’R Strip that recognizes a wet condition in the patience bed. When a wet condition is detected the transmitter is activated and sends a coded transmission to the companion REDEEM receiver (model 6000-3) located at the nurse’s station. The transmitter receives power from a 9-volt battery. This application is for the transmitter portion only; the receiver portion was tested and complies with the Declaration of Conformity procedures according to FCC Part 15 Subpart B. 2.3 Modification Incorporated/Special Accessories on EUT: There were no modifications or special accessories required to comply with the specification. Signature: Typed Name: Norman A. Roberts Title: Production & Engineering Manger COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 17 of 51 Exhibit 6 SECTION 3.0 TEST SPECIFICATION, METHODS & PROCEDURES 3.1 Test Specification: Title:FCC PART 15, Subpart C (47 CFR 15). Section 15.249 Operation within the bands 902-928 MHz, 2400- 2483.5 MHz, 5725-5875 MHz and 24.0-24.25 GHz. Purpose of Test: The tests were performed to demonstrate Initial compliance. 3.2 Methods & Procedures: 3.2.1 '' 15.249 (a) The field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental frequency Field strength of fundamental (millivolts/meter) Field strength of harmonics (microvolts/meter) 902 – 902 MHz50500 2400 – 2483.5 MHz50500 5725 – 5875 MHz50500 24.0 – 24.25 GHz2502500 (b) Field strength limits are specified at a distance of 3 meters. (c) Emissions radiated outside of the specified frequency bands, except for harmonics; shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in ' 15.209, whichever is the lesser attenuation. (d) As shown in ' 15.35(b), for frequencies above 1000 MHz, the above field strength limits are based on average limits. However, the peak field strength of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB under any condition of modulation. (e) Parties considering the manufacture, importation, marketing or operation of equipment under this section should also not the COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 18 of 51 Exhibit 6 requirements in ' 15.37(d). 3.2.2 '' 15.207 Conducted Limits (a) For an intentional radiator which is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 450 kHz to 30 MHz shall not exceed 250 microvolts. Compliance with the provision shall be based on the measurement of the radio frequency voltage between each power line and ground at the power terminals. 3.3 Test Procedure The line conducted and radiated emissions testing was performed according to the procedures in ANSI C63.4 (1992). Line conducted and radiated emissions testing was performed at CCL’s anechoic chamber located at 1940 W. Alexander Street in Salt Lake City, Utah. This site has been fully described in a report submitted to the FCC, and was accepted in a letter dated March 1, 1999 (31040/SIT). CCL participates in the National Voluntary Laboratory Accreditation Program (NVLAP) and has been accepted under NVLAP L…

Text truncated - open the document above for the full version.

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 13 of 57 Exhibit 6 Exhibit 6: Test Report TEST REPORT FROM: COMMUNICATION CERTIFICATION LABORATORY 1940 W. Alexander Street Salt Lake City, Utah 84119-2039 Type of Report: Certification TEST OF: 6000-4 FCC ID: OJC6000-W916RT01 To FCC PART 15, Subpart C Section 15.231 Test Report Serial No: 73-6645 Applicant: Health Sense International Inc. 657 Newmark Avenue P.O. Box 293 Coos Bay, OR 97420 Date of Test: June 4, 1999 Issue Date: June 7, 1999 COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 14 of 57 Exhibit 6 CERTIFICATION OF ENGINEERING REPORT This report has been prepared by Communication Certification Laboratory to determine compliance of the device described below with the notification requirements of FCC Part 15, Subpart C Section 15.231. This report may be reproduced in full, partial reproduction may only be made with the written consent of the laboratory. The results in this report apply only to the sample tested. -Applicant:Health Sense International Inc. - Manufacturer:Health Sense International Inc. -Trade Name:REDEEM -Model Number:6000-4 -FCC ID:OJC6000-W916RT01 On this 7 th day of June 1999, I, individually, and for Communication Certification Laboratory, certify that the statements made in this engineering report are true, complete, and correct to the best of my knowledge, and are made in good faith. Although NVLAP has recognized that the Communication Certification Laboratory EMC testing facilities are in good standing, NVLAP does not endorse the product described in this report. COMMUNICATION CERTIFICATION LABORATORY Checked by: William S. Hurst, P.E. Vice President Tested by: Roger J. Midgley EMC Engineering Manager COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 15 of 57 Exhibit 6 SECTION 1.0 CLIENT INFORMATION 1.1 Client Information: Company Name: Health Sense International Inc. 657 Newmark Avenue P.O. Box 293 Coos Bay, OR 97420 Contact Name:Norman A. Roberts Title:Production & Engineering Manager COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 16 of 57 Exhibit 6 SECTION 2.0 EQUIPMENT UNDER TEST (EUT) 2.1 Identification of EUT: Trade Name:REDEEM Model Name or Number:6000-4 Serial Number:N/A Options Fitted:N/A Country of Manufacture:U.S.A. 2.2 Description of EUT: The REDEEM transmitter is a professional incontinence management system designed to sense a fluid release from patience in a nursing home or hospital. The transmitter (model 6000-4) is attached to a Sense’R Strip that recognizes a wet condition in the patience bed. When a wet condition is detected the transmitter is activated and sends a coded transmission to the companion REDEEM receiver (model 6000-3) located at the nurse’s station. The transmitter receives power from a 9-volt battery. This application is for the transmitter portion only; the receiver portion was tested and complies with the Declaration of Conformity procedures according to FCC Part 15 Subpart B. 2.3 Modification Incorporated/Special Accessories on EUT: There were no modifications or special accessories required to comply with the specification. Signature: Typed Name: Norman A. Roberts Title: Production & Engineering Manger COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 17 of 57 Exhibit 6 SECTION 3.0 TEST SPECIFICATION, METHODS & PROCEDURES 3.1 Test Specification: Title:FCC PART 15, Subpart C (47 CFR 15). Section 15.231 Periodic operation in the band 40.66-40.70 MHz and above 70 MHz. Purpose of Test: The tests were performed to demonstrate Initial compliance. 3.2 Methods & Procedures: 3.2.1 '' 15.231 (a) The provision of this section are restricted to periodic operation within the band 40.66-40.70 MHz and above 70 MHz. Except as Shown in paragraph (e) of this section, the intentional radiator is restricted to the transmission of a control signal such as those used with alarm systems, door openers, remote switches, etc. Radio control of toys in not permitted. Continuous transmissions, such as voice or video, and data transmissions are not permitted. The prohibition against data transmissions does not preclude the use of recognition codes. Those codes are used to identify the sensor that is activated or to identify the particular component as being part of the system. The following conditions shall be met to comply with the provisions for this periodic operation: (1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. (2) A transmitter activated automatically shall cease transmission within 5 seconds after activation. (3) Periodic transmissions at regular predetermined intervals are not permitted. However, polling or supervision transmission to determine system integrity of transmitters used in security or safety applications are allowed if the periodic rate of transmission does not exceed one transmission of not more than one second duration per hour for each transmitter. (4) Intentional radiators which are employed for radio control COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 18 of 57 Exhibit 6 purposes during emergencies involving fire, security, and safety of life, when activated to signal an alarm, may operated during the pendency of the alarm condition. (b) In addition to the provisions of ' 15.205, the field strength of emission from intentional radiators operated under this section shall not exceed the following: Fundamental frequency (MHz) Field strength of fundamental (microvolts/meter) Field strength of spurious emissions (microvolts/meter) 40.66 - 40.702,250225 70 –1301,250125 130 – 1741,250 to 3,750 **125 to 375 ** 174 – 2603,750375 260 – 4703,750 to 12,500 **375 to 1,250 ** Above 47012,5001,250 ** Linear interpolations (1) the above field s…

Text truncated - open the document above for the full version.

COMMUNICATION CERTIFICATION LABORATORYTEST REPORT: 73-6645 FCC ID: OJC6000-W916RT01 Page 29 of 51 Exhibit 7 Exhibit 7: Test Set-Up Photographs