OMC310900Wi-Fi Transmitter

1 Directions Meanings of icons: Forbidding: forbid improper operations to avoid damaging the MP7 Module. Caution: cautions for operators to avoid potential damages. Please note and remember. Importance: important information, common notes, definitions, general knowledge and references, etc. Other trademarks and trade name may be used in this manual to refer to either the entities claiming the marks and names or their products. The manufacture disclaims any proprietary interest in trademarks and trade names other than its own. Information in this manual is subject to change without notice. Reproduction in any manner whatsoever without the written permission from the manufacture is strictly forbidden. Product images in this manual are for your reference only. 2 Content Directions ....................................................................................................................... 1 Safety Precautions......................................................................................................... 3 FCC Compliance ............................................................................................................ 4 1 Knowing Your MP7 Module ........................................................................................ 5 1-1 Front View ............................................................................................................ 5 1-2 Left View .............................................................................................................. 5 1-3 Rear View ............................................................................................................. 5 2 Caring the MP7 Module .............................................................................................. 6 2-1 LCD Screen .......................................................................................................... 6 2-2 Other accessories................................................................................................. 6 2-3 If the water comes into the MP7 Module ............................................................... 7 2-4 Other Notes .......................................................................................................... 7 3 Traveling with the MP7 Module .................................................................................. 8 4 Turning on the MP7 Module ....................................................................................... 8 5 Get to know your system ........................................................................................... 9 6 For system security .................................................................................................. 10 7 Communication ......................................................................................................... 12 8 Fun ............................................................................................................................. 13 9 Spare Parts ................................................................................................................ 14 10 Appendix ................................................................................................................. 15 10-1 Troubleshooting ................................................................................................ 15 10-2 Specifications ................................................................................................... 16 3 Safety Precautions 1. DO NOT press or touch the LCD Screen. DO NOT place the MP7 Module with small items, they may scratch LCD Screen or enter the MP7 Module. 2. DO NOT expose the MP7 Module to dirty or dusty environment. Keep the environment clean and dry. 3. DO NOT place the MP7 Module on uneven or unstable work surface. 4. DO NOT place or drop objects on the top of the MP7 Module. DO NOT shove any foreign objects into the MP7 Module. DO NOT cover the LCD Screen strongly. 5. DO NOT expose the MP7 Module to strong magnetic or electrical fields; DO NOT place the floppy disk near or on the MP7 Module, that may loss the data of the floppy disk. 6. DO NOT leave the MP7 Module facing the sun as it can damage the LCD Screen, especially in the car. 7. SAFE TEMP: This MP7 Module should only be used in environments with ambient temperatures between 5°C(41°F) and 35°C(95°F). 8. DO NOT expose the MP7 Module to or use near liquids, rain, or moisture. 9. Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 10. DO NOT throw the MP7 Module in municipal waste. Check local regulations for disposal of electronic products. Please recycle the Battery Pack, and check with your Local Authority or retailer for recycling advice. 11. The MP7 Module and the Adapter may occur some heat during operating or charging. DO NOT leave the MP7 Module on your lap or any part of the body in order to prevent discomfort or injury from heat exposure. 12. INPUT RATING: Refer to the rating label on the MP7 Module and be sure that the Power Adapter complies with the rating. Only use attachments or accessories specified by the manufacturer. 13. Checking the connections between the main unit and attachments before turning on the MP7 Module. 14. DO NOT use the MP7 Module during eating food avoid dirtying the MP7 Module. 15. DO NOT insert anything into the MP7 Module that may result in short circuit or damage the circuit. 16. Powering off the MP7 Module, if you want install or remove some external devices, which are not support hot-plug. 17. Disconnect the MP7 Module from the electrical outlet and remove any installed batteries before cleaning. And Keep it away from children. 18. DO NOT disassemble the MP7 Module, only a certified service technician should perform repairs on your computer. Otherwise, problem may result and the manufacturer should not hold responsibility for the damage. 19. Only use Battery Packs approved by…

Text truncated - open the document above for the full version.

Date (02/28/2011) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: OMC310900 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Wanlida Group Co., Ltd on behalf of Icon Health & Fitness hereby requests permanent confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagrams Operational Descriptions The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Wang Guiteng Telephone Number: 86-596-7653680-8266 Email: [email protected]

Date (02/28/2011) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Icon Health & Fitness 1500 South 1050 West Logan, UT 84321, United States hereby authorize TUV-SUD China Shenzhen Branch 6/F, H Hall, Century Craftwork Culture Square, No. 4001 Fuqiang Road, Futian District, Shenzhen 518048 P. R. China Paul Yu Phone: +86-755-88286998-273 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Type of equipment: MP7 module Model name: 310900 FCC ID: OMC310900 This authorization expires one year from the current date. Sincerely, Compliance Engineer: Brent Thompson Telephone Number: (435) 750-5000 5272 Fax: (801) 753-0209

Date (02/28/2011) BABT TCB Balfour House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Icon Health & Fitness 1500 South 1050 West Logan, UT 84321, United States hereby authorize Wanlida Group Co., Ltd. No. 618, Jiahe Road, Wanlida Industry Zone, Xiamen 361006, P.R.China Wang Guiteng Phone: +86-596-7653680-8266 e-mail: [email protected] to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that neither we nor any party to this application are subject to denial of U.S Federal benefits, which include FCC benefits, pursuant to section 5301 of Anti-Drug Abuse Act of 1988, U.S.C 862 because of conviction for possession or distribution of controlled substance. This authorization is application to product: Type of equipment: MP7 module Model name: 310900 FCC ID: OMC310900 This authorization expires one year from the current date. Sincerely, Compliance Engineer: Brent Thompson Telephone Number: (435) 750-5000 5272 Fax: (801) 753-0209

External Photos of 310900

Internal Photos of 310900

Page 1 of 1 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Maximum Permissible Exposure(MPE) Estimation for 310900 1. Introduction 310900 is a MP7 module, which contain Wi-Fi function inside (802.11b/g/n). Also the MP7 module will be installed in the treadmill for expanded internet function. 2. Limit and Guidelines on Exposure to Electromagnetic Fields The minimum safe distance per FCC part 2.1091 was calculated the power density of 1 mW/cm limit for maximum permissible exposure in an uncontrolled environment per FCC part 1, section 1.1307(b). So the minimum safe distance is the larger of this calculated distance or 20cm. As this MP6 module, it is being insured by specify the minimum safe distance the antenna must be kept the user is 20cm in User manual. So this MP7 module is compliance with the FCC part 2.1091. 3. Calculation method For the final determination of compliance boundary the model for far-field calculation is used since this overestimates the field strength in the near-field region. Thus the calculated compliance boundary should be rather more conservative and on the safe side. For EUT the following compliance boundary is calculated: Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=power density in mW/cm 2 Pout=output power to antenna in mW G=gain of antenna in linear scale Pi=3.14159 R=distance between observation point and center of the radiator in cm 310900: Maximum power output: Pout=175.39mW(22.44dBm) Maximum Antenna gain of the certified antenna list: G=1dBi=1.259 Maximum EIRP from transmit antenna: EIRP=22.44+1.0 =23.44dBm(220.80mW) To be determine the overall exposure at 20cm from the EUT(R=20cm) Pd=0.0439 mW/cm 2 The power density at 20cm from the antenna of the EUT is 0.0439mW/cm 2, which is less than the permitted maximum power density. Jiangsu TUV Product Service Ltd. Shenzhen Branch Reviewed by: Prepared By: Paul Yu/Assistant EMC Manager Ken Li//EMC Project Engineer Date: 2011-03-14 Date: 2011-03-14

Report Number: 68.850.11.009.01 Page 1 of 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 FCC - TEST REPORT Report Number : 68.850.11.009.01 Date of Issue: 14 April 2011 Model : 310900 Product Type : MP7 Module Applicant : ICON Health & Fitness Inc. Address : 1500 S 1000 W, LOGAN, Utah 84321 Xiamen Fujian, China 361006 Production Facility : Wanlida Group Co., Ltd. Address : Wanlida Industry Zone, Nanjing, Fujian, China 363601 Test Result :  Positive  Negative Total pages including Appendices : 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch is a subcontractor to TÜV SÜD Product Service GmbH according to the principles outlined in ISO 17025. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch reports apply only to the specific samples tested under stated test conditions. Construction of the actual test samples has been documented. It is the manufacturer's responsibility to assure that additional production units of this model are manufactured with identical electrical and mechanical components. The manufacturer/importer is responsible to the Competent Authorities in Europe for any modifications made to the production units which result in non-compliance to the relevant regulations. Jiangsu TÜV Product Service Ltd. – Shenzhen Branch shall have no liability for any deductions, inferences or generalizations drawn by the client or others from Jiangsu TÜV Product Service Ltd. – Shenzhen Branch issued reports. This report is the confidential property of the client. As a mutual protection to our clients, the public and ourselves, extracts from the test report shall not be reproduced except in full without our written approval Report Number: 68.850.11.009.01 Page 2 of 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 1 Table of Contents 1 Table of Contents............................................................................................ 2 2 Details about the Test Laboratory..................................................................... 3 3 Description of the Equipment Under Test............................................................ 4 4 Summary of Test Standards............................................................................. 5 5 Summary of Test Results................................................................................ 6 6 General Remarks.......................................................................................... 7 7 Technical Requirements................................................................................. 8 7.1 Conducted Emission AC Power Port......................................................... 8 7.2 Conducted Peak Power......................................................................... 12 7.3 Band edge compliance of RF emission...................................................... 14 7.4 Spurious RF Conducted emission............................................................ 32 7.5 Spurious radiated emissions................................................................... 40 7.6 7.7 6dB bandwidth.................................................................................... Power spectral density........................................................................... 46 56 8 System Measurement Uncertainty................................................................... 66 Report Number: 68.850.11.009.01 Page 3 of 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 2 Details about the Test Laboratory Details about the Test Laboratory Test site1: Company name: Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6th Floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District 518048, Shenzhen,P.R.C. Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Test site2: Company name: Audix Technology (shenzhen) Co.,Ltd Block Shenzhen, Science & Industry Park, Nantou, Shenzhen, Guangdong, China Telephone: 86 755 2663 9496 Fax: 86 755 2663 2877 Report Number: 68.850.11.009.01 Page 4 of 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 3 Description of the Equipment Under Test Description of the Equipment Under Test Product: MP7 Module Model no.: 310900 Options and accessories: NIL Rating: DC 12V, 2A Test with adaptor: Input: AC 100-240V, 50/60Hz, 1A Output: DC 12V, 2A Antenna: Integral antenna inside enclosure of EUT, NOT accessible by end user Antenna Gain=1dBi RF Transmission Frequency: 2400-2483.5MHz Description of the EUT: NIL Auxiliary Equipment Used during Test: DESCRIPTION MANUFACTURER MODEL NO.(SHIELD) S/N(LENGTH) Laptop Lenovo X61 L3-L3729 08/03 Report Number: 68.850.11.009.01 Page 5 of 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 4 Summary of Test Standards Test Standards Part 15 Subpart C, Oct. 1, 2009 PART 15 - RADIO FREQUENCY DEVICES Subpart C - Intentional Radiators Report Number: 68.850.11.009.01 Page 6 of 66 Jiangsu TÜV Product Service Ltd. – Shenzhen Branch 6 floor, H Hall, Century Craftwork Culture Square, No. 4001, Fuqiang Road, Futian District, Shenzhen 518048, P. R. China, Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 5 Summary of Test Results Technical Requirements FCC Part 15 Subpart C Test Condition P…

Text truncated - open the document above for the full version.

Test setup photos of 310900 1. Conducted Emission Test setup Front side Rear Side 2. Radiated Emission Test Below 1GHz Above 1GHz