OMC453584CTablet

iFIT Health and Fitness, Inc. To: Federal Communications Commission Date: 2024/05/30 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Certification designating a U.S. Agent for Service of Process Section 2.911(d)(7) (KDB 986446 D01 Covered Equipment) iFIT Health and Fitness, Inc. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Contact Person: Trekton Christiansen FRN: 0009109950 Company Name: iFIT Health and Fitness, Inc. Company Address: 1500 S 1000 W, Logan, Utah, United States, 84321 Email: [email protected] Sincerely yours, Applicant Company (Grantee): iFIT Health and Fitness, Inc. Contact Person / Title: Trekton Christiansen / Regulatory Compliance Engineer Tel.: +1 435-786-5599 E-mail: [email protected]

Certification Application Attestation Statements Date: June 26, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) iFIT Health and Fitness, Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) iFIT Health and Fitness, Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is /  - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. Thank you, Contact Person / Title: Trekton Christiansen/Regulatory Compliance Engineer Tel.: +1 435-786-5915 E-mail: [email protected]

Date : 8/2/2024 UNII Device Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization, Device FCC ID : OMC453584C Device IC : 3673A-453584C (1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A (2)Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 5150~5250 Yes , No Yes , No Yes , No Yes , No 5250~5350 Yes , No Yes , No Yes , No Yes , No 5470~5725 Yes , No Yes , No Yes , No Yes , No 5725~5825 Yes , No Yes , No Yes , No Yes , No (3)Country code selection ability - Yes , No If no, pls explain how it was implemented : This function is disabled via firmware setting. (4)Meet 15.202 / RSS 247 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5)For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non- DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Contact Person / Title: Trekton Christiansen / Regulatory Compliance Engineer Tel.: +1 435-786-5915 E-mail: [email protected] Signature:

Declaration of Authorization We Company Name: iFIT Health and Fitness, Inc. Address: 1500 S 1000 W City: Logan State: Utah Country: United States Declare that Name Representative of agent: William Chung / Senior Director Agent Company name: Eurofins E&E Wireless Taiwan Co., Ltd. Address: No. 140-1, Changan Street, Bade District, City: Taoyuan Country: Taiwan Is authorized to apply for Certification of the following product(s) Product Name: Tablet FCC ID : OMC453584C on our behalf This is valid until December 31, 2025, or until FCC certification are completed, whichever comes sooner. Date: 2024/8/2 Contact Person / Title: Trekton Christiansen / Regulatory Compliance Engineer Tel.: +1 435-786-5915 E-mail: [email protected] Signature:

FCC, Request for non-disclosure Date: 02-01-2022 RF_501, Issue 10 Company Name: iFIT Health and Fitness, Inc. Address: 1500 S 1000 W, City: Logan, Utah Country: United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: OMC453584C Reference number: ###### Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application: Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below): Internal Photos User’s Manual Test Set-up Photos External Photos Justification: 180 Days The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. Date: 2024/8/2 Name and signature of applicant: Trekton Christiansen /Regulatory Compliance Engineer Notes: 1) A document or type of document can only have ONE type of confidentiality! 2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)! The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this! 5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period

Date: 2024/8/2 WIFI Channel 12 & 13 Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability for FCC ID : OMC453584C Please check Product hardware does not have the capability to operate on channel 12 & 13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. This product is compliant with 15.247 and support location recognition by country code. Others Pls explain detail here. Contact Person / Title: Trekton Christiansen / Regulatory Compliance Engineer Tel.: +1 435-786-5915 E-mail: [email protected] Signature:

Label & Label Location Model: MP 10- X E N O N- C WLAN printing is outside of bottom door FCC ID: OMC453584C IC: 3673A-453584C

MPE Evaluation Report for FCC Report No.: USSC247189001 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 12 Template: v01.00 MPE Evaluation Report for FCC Applicant Name : iFIT Health and Fitness, Inc. Applicant Address : 1500 S 1000 W, Logan, Utah, United States, 84321 Product Name : Tablet Brand Name : iFIT Model Number : MP10-XENON-C FCC ID : OMC453584C Report Number : USSC247189001 Compliant Standards : FCC 47 CFR §2.1091 Sample Received Date : Jul. 12, 2024 Report Issued Date : Aug. 19, 2024 The above equipment has been tested by Eurofins E&E Wireless Taiwan Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Device Under Test (DUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s characteristics under the conditions specified in this report. Note: 1. The test results are valid only for samples provided by customers and under the test conditions described in this report. 2. This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3. The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. Approved By： Ted Fu / Assistant Manager MPE Evaluation Report for FCC Report No.: USSC247189001 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 12 Template: v01.00 Table of Contents Revision History ........................................................................................................................................................................... 3 1. Test Regulations .................................................................................................................................................................... 4 1.1. Reference Standard and Guidance .............................................................................................................................. 4 1.2. RF Exposure Limits ...................................................................................................................................................... 4 2. Information of Testing Laboratory ....................................................................................................................................... 6 3. DUT (Device Under Test) Information .................................................................................................................................. 7 3.1. Device Overview .......................................................................................................................................................... 7 4. Maximum Permissible Exposure (MPE) Assessment ......................................................................................................... 8 4.1. Introduction .................................................................................................................................................................. 8 4.2. Determination of Exemption for Low Power Devices ................................................................................................... 8 4.3. Standalone Maximum Permissible Exposure Evaluation ........................................................................................... 11 4.4. Total Exposure Ratio Evaluation for Simultaneous Transmission............................................................................... 12 MPE Evaluation Report for FCC Report No.: USSC247189001 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 12 Template: v01.00 Revision History Rev. Issued Date Description Revised by 00 Aug. 19, 2024 Initial Issue Rowan Hsieh MPE Evaluation Report for FCC Report No.: USSC247189001 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 12 Template: v01.00 1. Test Regulations 1.1. Reference Standard and Guidance The Maximum Permissible Exposure (MPE) evaluation documented in this report were performed in accordance with following FCC published KDB guidance and standard： 47 CFR Part 1.1307 47 CFR Part 1.1310 47 CFR Part 2.1091 KDB Publication 447498 D01 – General RF Exposure Guidance v06 KDB Publication 447498 D04 – Interim General RF Exposure Guidance v01 1.2. RF Exposure Limits According to 47 CFR §1.1310, for operations within the frequency range of 300 kHz and 6 GHz (inclusive), the limits for maximum permissible exposure (MPE), derived from whole-body SAR limits and listed in below table, may be used instead of whole-body SAR limits to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b), except for portable devices as defined in §2.1093 of this chapter as these evaluations shall be performed according to the SAR provisions in §2.1093. At operating frequencies above 6 GHz, the MPE limits listed in below table shall be used in all cases to evaluate the environmental impact of human exposure to RF radiation as specified in §1.1307(b). Limits for Maximum Permissible Exposure (MPE) to Radiofrequency Electromagnetic Fields Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Averaging Time (minutes) (i) Limits for Occupational / Controlled Exposure 0.3 – 3.0 614 1.63 *(100) ≤ 6 3.0 – 30 1842 / f 4.89 / f *(900 / f2) < 6 30 – 300 61.4 0.163 1.0 < 6 300 – 1500 N/A N/A f / 300 < 6 1500 – 100000 N/A N/A 5 < 6 (ii) Limits for General Population / Uncontrolled Exposure 0.3 – 1.34 614 1.63 *(100) < 30 1.34 – 30 824 / f 2.19 / f *(180 / f2) < 30 30 – 300 27.5 0.073 0.2 < 30 300 – 1500 N/A N/A f / 1500 < 30 1500 – 100000 N/A N/A 1.0 < 30 Notes: 1. f = frequency in MHz. * = Plane-wave equivalent power…

Text truncated - open the document above for the full version.

Doc.No.:3.8.05 Rev00 1 ANTENNA INFORMATION OEM NA ODM Compal Platform model name MP10-XENON-C Intel platform (ex: Yes, No or NA) NA Platform type (ex: regular NB, convertible PC, AIO...etc) Tablet SAR minimum separation (mm) NA Antenna manufacturer INPAQ Technology Co.,Ltd. Address 2F., No.135, Ligone St., Beitou Dist., Taipei City 112019, Taiwan(R.O.C) Antenna Part number DC33002Y02H (WA-P-LA-03-327) Antenna type (ex: PIFA, Dipole...etc) PIFA Antenna Peak gain w/ cable loss (dBi)* 2400MHz 2450MHz 2500MHz BT 2.61 2.32 2.28 Cable Assembly Part Number and Information Cable PN Cable length(mm) Cable diameter(mm) Impedance(ohm) Connector type BT 01-13LC2-0P4 245 1.13 50 ohm I-PEX * 3D Antenna Peak Gain required being test in system basis. Doc.No.:3.8.05 Rev00 3 1. Test & System Description 1.1 Measurement Method and System Test setting： 1.2 Test setup Doc.No.:3.8.05 Rev00 4 1.3 Equipment list Device Manufacturer ■ SATIMO SG24 system : 0.4 to 6 GHz MVG ■ Control unit MVG ■ Power and control unit MVG ■ Tx and Rx amplification units MVG ■ Instrumentation rack MVG ■ Uninterruptible power supply FT ■ Reference horns MVG ■ Vector Network Analyzer Agilent E5071C 2. Radiation characteristics of antenna loaded in Host Platform BT Antenna ◼ BT Antenna: 2400MHz Peak Gain Total 2.61 Doc.No.:3.8.05 Rev00 5 ◼ BT Antenna: 2450MHz Peak Gain Total 2.32 ◼ BT Antenna: 2500MHz Peak Gain Total 2.28 Doc.No.:3.8.05 Rev00 6

Doc.No.:3.8.05 Rev00 1 ANTENNA INFORMATION OEM NA ODM Compal Platform model name MP10-XENON-C Intel platform (ex: Yes, No or NA) NA Platform type (ex: regular NB, convertible PC, AIO...etc) Tablet SAR minimum separation (mm) NA Antenna manufacturer PULSE Address 3F, No.2, Aly.1, Ln.235, Baoqiao Rd, Xindian Dist, New Taipei City, Taiwan Antenna Part number DC33002WZ2H (TZ29103) Antenna type (ex: PIFA, Dipole...etc) PIFA Antenna Peak gain w/ cable loss (dBi)* 2400MHz 2450MHz 2500MHz BT 2.57 2.17 2.15 Cable Assembly Part Number and Information Cable PN Cable length(mm) Cable diameter(mm) Impedance(ohm) Connector type BT 01-13LC2-0P4 245 1.13 50 ohm I- PEX * 3D Antenna Peak Gain required being test in system basis. Doc.No.:3.8.05 Rev00 3 1. Test & System Description 1.1 Measurement Method and System Test setting： 1.2 Test setup Doc.No.:3.8.05 Rev00 4 1.3 Equipment list Device Manufacturer ■ SATIMO SG24 system : 0.4 to 6 GHz MVG ■ Control unit MVG ■ Power and control unit MVG ■ Tx and Rx amplification units MVG ■ Instrumentation rack MVG ■ Uninterruptible power supply FT ■ Reference horns MVG ■ Vector Network Analyzer Agilent E5071C 2. Radiation characteristics of antenna loaded in Host Platform BT Antenna  BT Antenna: 2400MHz Peak Gain Total 2.57 Doc.No.:3.8.05 Rev00 5  BT Antenna: 2450MHz Peak Gain Total 2.17  BT Antenna: 2500MHz Peak Gain Total 2.15 Doc.No.:3.8.05 Rev00 6

RF Test Report Report No.: USRC247189002 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 64 Template : v02.00 RF Test Report Applicant ： iFIT Health and Fitness, Inc. Product Name ： Tablet Trade Name ： iFIT Model Number ： MP10-XENON-C Applicable Standard ： FCC 47 CFR PART 15 SUBPART C ANSI C63.10:2013 Received Date ： Jul. 12, 2024 Test Period ： Jul. 17, 2024 ~ Jul. 29, 2024 Issued Date ： Aug. 19, 2024 Issued by Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City 334025, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Frequency Range: 9 kHz to 325 GHz Bade test site： Test Firm Registration Number: 226252 Test Firm Designation Number: TW0010 Wugu test site： Test Firm Registration Number: 191812 Test Firm Designation Number: TW0034 Note: 1.The test results are valid only for samples provided by customers and under the test conditions described in this report. 2.This report shall not be reproduced except in full, without the written approval of Eurofins E&E Wireless Taiwan Co., Ltd. 3.The relevant information is provided by customers in this test report. According to the correctness, appropriateness or completeness of the information provided by the customer, if there is any doubt or error in the information which affects the validity of the test results, the laboratory does not take the responsibility. RF Test Report Report No.: USRC247189002 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 64 Template : v02.00 Revision History Rev. Issued Date Description Revised by 00 Aug. 19, 2024 Initial Issue Abby Hsu RF Test Report Report No.: USRC247189002 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 64 Template : v02.00 Verification of Compliance Applicant : iFIT Health and Fitness, Inc. Product Name : Tablet Trade Name : iFIT Model Number : MP10-XENON-C FCC ID : OMC453584C Applicable Standard : FCC 47 CFR PART 15 SUBPART C ANSI C63.10:2013 Test Result : Complied Performing Lab. : Eurofins E&E Wireless Taiwan Co., Ltd. No. 140-1, Changan Street, Bade District, Taoyuan City 334025, Taiwan (R.O.C.) Tel：+886-3-2710188 / Fax：+886-3-2710190 Taiwan Accreditation Foundation accreditation number: 1330 Eurofins E&E Wireless Taiwan Co., Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by Eurofins E&E Wireless Taiwan Co., Ltd. based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Approved By ： RF Test Report Report No.: USRC247189002 Issued Date: Aug. 19, 2024 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 64 Template : v02.00 TABLE OF CONTENTS 1 General Information ...................................................................................................... 5 1.1. Summary of Test Result .......................................................................................... 5 1.2. Testing Location ...................................................................................................... 6 1.3. Measurement Uncertainty ....................................................................................... 6 1.4. Test Site Environment ............................................................................................. 6 2 EUT Description ............................................................................................................ 7 3 Test Methodology ......................................................................................................... 9 3.1. Mode of Operation .................................................................................................. 9 3.2. EUT Test Step ......................................................................................................... 9 3.3. Configuration of Test System Details .................................................................... 10 3.4. Test Instruments ................................................................................................... 12 4 Measurement Procedure ............................................................................................ 15 4.1. AC Power Line Conducted Emission Measurement ............................................. 15 4.2. Radiated Emission Measurement ......................................................................... 17 4.3. Maximum Conducted Output Power Measurement .............................................. 21 4.4. 20 dB RF Bandwidth Measurement ...................................................................... 22 4.5. Carrier Frequency Separation Measurement ........................................................ 23 4.6. Number of Hopping Measurement ........................................................................ 24 4.7. Time of Occupancy (Dwell Time) Measurement ................................................... 25 4.8. Out of Band Conducted Emissions Measurement ................................................ 26 4.9. Antenna Measurement ......................................................................................... 27 4.10. Other requirements ............................................................................................... 27 5 Test Results ................................................................................................................ 28 5.1. Conducted Emission ............................................................................................. 28 5.2. Conducted Test Results ........................................................................................ 30 5.3. Radiated Emission Measurement ......................................................................... 31 Appendix A. Test Data…

Text truncated - open the document above for the full version.

Appendix A. Test Data Power Limit dBmWdBmWW DH16.550.00457.120.00515 <0.1258.00 DH36.530.00457.110.00514 <0.1258.00 DH56.570.00457.140.00518 <0.1258.00 DH16.510.00456.960.00497 <0.1258.00 DH36.540.00457.030.00505 <0.1258.00 DH56.550.00457.060.00508 <0.1258.00 DH16.520.00456.980.00499 <0.1258.00 DH36.510.00457.010.00502 <0.1258.00 DH56.540.00457.050.00507 <0.1258.00 2DH16.550.00459.410.00873 <0.1258.00 2DH36.560.00459.450.00881 <0.1258.00 2DH56.580.00469.470.00885 <0.1258.00 2DH16.520.00459.560.00904 <0.1258.00 2DH36.600.00469.580.00908 <0.1258.00 2DH56.620.00469.570.00906 <0.1258.00 2DH16.500.00459.420.00875 <0.1258.00 2DH36.560.00459.480.00887 <0.1258.00 2DH56.610.00469.530.00897 <0.1258.00 3DH16.570.00459.750.00944 <0.1258.00 3DH36.590.00469.780.00951 <0.1258.00 3DH56.610.00469.830.00962 <0.1258.00 3DH16.620.00469.820.00959 <0.1258.00 3DH36.640.00469.840.00964 <0.1258.00 3DH56.650.00469.900.00977 <0.1258.00 3DH16.600.00469.800.00955 <0.1258.00 3DH36.610.00469.860.00968 <0.1258.00 3DH56.660.00469.920.00982 <0.1258.00 Note: The relevant measured result has the offset with cable loss already. BT_8DPSK Test Mode 2402 2441 2480 BT_GFSK Maximum Conducted Output Power Measurement Test Software Version Command RF Power setting in Test Software 2480 BT_π/4-DQPSK 2441 2402 Frequency (MHz) Packet Type 2402 2441 2480 Average Power Peak Power RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd.Page 1 of 3 24020.8590.751 24410.8570.751 24800.8580.752 24021.2971.178 24411.2971.178 24801.2981.178 24021.016≧ 0.573 24411.008≧ 0.571 24801.002≧ 0.572 24020.976≧ 0.865 24411.258≧ 0.865 24801.318≧ 0.865 20 dB Emission Bandwidth and 99 % Occupied Bandwidth Measurement Limit (MHz) BT_8DPSK Test Mode Measurement (MHz) Carrier Frequency Separation Measurement BT_GFSK Frequency (MHz) Frequency (MHz) Test Mode BT_GFSK BT_8DPSK 20 dB RF Bandwidth (MHz) 99 % Occupied Bandwidth (MHz) RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd.Page 2 of 3 Cycle Calculate79CH * 0.4 = 31.6 (sec) The EUT Hopping Number per Sec1600 times/sec Each Channel Dwell Times per Sec800/79CH = 10.13 (times/sec) Each Channel Dwell Times on Cycle(1)31.6 * 10.13 = 320.108 (times) Each Channel Dwell Times (2)0.390 ms Dwell Times on Cycle (1) * (2)124.842 ms Limit (msec)< = 400 Cycle Calculate79CH * 0.4 = 31.6 (sec) The EUT Hopping Number per Sec1600 times/sec Each Channel Dwell Times per Sec400/79CH = 5.06(times/sec) Each Channel Dwell Times on Cycle(1)31.6 * 5.06 = 159.896(times) Each Channel Dwell Times (2)1.650 ms Dwell Times on Cycle (1) * (2)263.828 ms Limit (msec)< = 400 Cycle Calculate79CH * 0.4 = 31.6 (sec) The EUT Hopping Number per Sec1600 times/sec Each Channel Dwell Times per Sec266.7/79CH = 3.38(times/sec) Each Channel Dwell Times on Cycle(1)31.6 * 3.38 = 106.808(times) Each Channel Dwell Times (2)2.901 ms Dwell Times on Cycle (1) * (2)309.850 ms Limit (msec)< = 400 Cycle Calculate79CH * 0.4 = 31.6 (sec) The EUT Hopping Number per Sec1600 times/sec Each Channel Dwell Times per Sec800/79CH = 10.13 (times/sec) Each Channel Dwell Times on Cycle(1)31.6 * 10.13 = 320.108 (times) Each Channel Dwell Times (2)0.400 ms Dwell Times on Cycle (1) * (2)128.043 ms Limit (msec)< = 400 Cycle Calculate79CH * 0.4 = 31.6 (sec) The EUT Hopping Number per Sec1600 times/sec Each Channel Dwell Times per Sec400/79CH = 5.06(times/sec) Each Channel Dwell Times on Cycle(1)31.6 * 5.06 = 159.896(times) Each Channel Dwell Times (2)1.654 ms Dwell Times on Cycle (1) * (2)264.468 ms Limit (msec)< = 400 Cycle Calculate79CH * 0.4 = 31.6 (sec) The EUT Hopping Number per Sec1600 times/sec Each Channel Dwell Times per Sec266.7/79CH = 3.38(times/sec) Each Channel Dwell Times on Cycle(1)31.6 * 3.38 = 106.808(times) Each Channel Dwell Times (2)2.907 ms Dwell Times on Cycle (1) * (2)310.491 ms Limit (msec)< = 400 Test Mode Average Time of Occupancy (Dwell Time) Measurement 3DH1 Test Mode Average Time of Occupancy (Dwell Time) Measurement DH3 DH1 BT_8DPSK 3DH3 3DH5 DH5 BT_GFSK Time of Occupancy (Dwell Time) Measurement RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd.Page 3 of 3

RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 1 of 15 Appendix B. Test Plots Out of Band Conducted Spurious Emission BT_GFSK Low ch Mid ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 2 of 15 BT_8DPSK Low ch Mid ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 3 of 15 Conducted Band Edge BT_GFSK_Un-hopping Low ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 4 of 15 BT_GFSK_Hopping Low ch-High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 5 of 15 BT_8DPSK _Un-hopping Low ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 6 of 15 BT_8DPSK _Hopping Low ch-High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 7 of 15 Number of Hopping BT_GFSK CH00 - CH39 CH39- CH78 RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 8 of 15 BT_8DPSK CH00 - CH39 CH39- CH78 RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 9 of 15 20 dB RF Bandwidth & 99 % Occupied Bandwidth BT_GFSK Low ch Mid ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 10 of 15 BT_8DPSK Low ch Mid ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 11 of 15 Carrier Frequency Separation BT_GFSK Low ch Mid ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 12 of 15 BT_8DPSK Low ch Mid ch High ch RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 13 of 15 Time of Occupancy (Dwell Time) BT_GFSK DH1 DH3 DH5 RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 14 of 15 BT_π/4-DQPSK 2DH1 2DH3 2DH5 RF Test Report Report No.: USRC247189002 Eurofins E&E Wireless Taiwan Co., Ltd. Page 15 of 15 BT_8DPSK 3DH1 3DH3 3DH5