OMC425338ETablet

Instructions for the iFIT TABLE operation 一，installation instructions 1、The 7tablet shipped by Yiwei is shown in the figure below： 2、The following detailed introduction and the assembly method of the plastic shell are provided for customer reference, and customers can match any shape design according to the requirements of the module 3D: www.sheway.com 下盖 背面 二，operation declaration 1. After power-on, the display picture is such as (Figure 1) graph 1 2. Click "" button to enter the next page and connect to WiFi network (Figure 2) www.sheway.com graph 2 3. After successful network connection: click the setting language, the default "" language need not be modified (Figure 3), directly click "" to enter the next page such as (Figure 4) graph 3 graph 4 4. Click the "" button in the top right corner (Figure 4) to enter the following picture (Figure 5) graph 5 4. Click the "" button to enter the main interface page (Figure 6) graph 6 6. Click " " in the upper left corner of (Figure 6) to enter the (Figure 7) page; graph 7 7. Click (Figure 7) after the button "" starts; the page display (Figure 8). Click "" will enter the exercise warm-up page (Figure 9) graph 8 graph 9 8. Click (Figure 9) "" and "" to adjust the speed and slope such as (Figure 10) graph 10 9. Click "" to connect to the Bluetooth headset, heart rate device, click connect to connect to the searched device (Figure 11, Figure 12), click any page Bluetooth connection pop-up page will be hidden. graph 11 graph 12 10. After the warm-up, enter the video playback page (Figure 13), and the speed and slope adjustment are the same as the above graph 13 11. Click any page (Figure 13) screen to enter the setting page (Figure 14) to adjust the volume, open the subtitles, connect the Bluetooth device, and end the movement graph 14 12. Click " " to end the movement to the relaxation page (Figure 15) graph 15 13. Click "" to end the movement to view the movement report (Figure 16) graph 16 Manufacturer's Name: IFIT HEALTH & FITNESS, INC. Product Name: Tablet Trade Mark: iFIT Model number: MP7-Argon2-E,MP7-Argon-E, MP7-Argon-CHP-E, MP7-Argon2X-E, MP7-Argon2-Nopv-E This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies with RF specifications when the device used at 20cm from your body. The product shall only be connected to a USB interface of version USB2.0 RF Secification: Function Operation Frequency Max RF outputpower: Limit BLE 2402MHz–2480MHz 8.13dBm 20 dBm. BT(BR+EDR) 2402MHz–2480MHz 8.67dBm 20 dBm. WIFI 802.11b/g/ n(HT20,HT40) 802.11b/g/n(20MHz): 2412~2472MHz; 802.11n(40MHz):2422~2462MHz 16.22dBm 20 dBm. Wi-Fi 5.2G(802.11a/n20/n4 0) 802.11a/ n20: 5180-5240MHz 802.11 n40: 5190-5230MHz 9.47dBm 23 dBm. Wi-Fi 5.3G(802.11a/n20/n4 0) 802.11a/ n20: 5260MHz~5320MHz 802.11n(40MHz):5270~5310MHz 9.71dBm 23 dBm. Wi-Fi 5.6G(802.11a/n20/n4 0) 802.11a/ n20: 5500MHz~5700MHz 802.11 n40: 5510MHz~5670MHz 9.8dBm 23dBm. Wi-Fi 5.8G(802.11a/n20/n4 0) 802.11a/n20:5745MHz~5825MHz 802.11 n40:5755MHz~5795MHz 9.39dBm 13.98 dBm. 5150-5250MHz product for indoor use only The use for 5.15-5.35GHz RLAN band is restricted to indoor use. This restriction will be applied to all Member States of European Union. DECLARATION OF CONFORMITY I hereby declare that the product Product Name: Tablet Product Description: Tablet Model: MP7-Argon2-E,MP7-Argon-E, MP7-Argon-CHP-E, MP7-Argon2X-E, MP7-Argon2-Nopv-E Tradename or Brand(s): iFIT (Name of product, type or model, batch or serial number) Antenna : FPC Antenna BT: 1.97 dBi WIFI 5G: 2.03 dBi Hard Ware Version: MT8163-21.5TG-A0 Soft Ware Version: com.ifit.eru-2.0.5.1213.apk, com.ifit.standalone-2.6.78.3818.apk, com.ifit.launcher-1.0.17.22.apk FW Version: Android 9 Satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU and declare that the same application has not been lodged with any other notified body. ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) ETSI EN 300 440 V2.2.1 (2018-07) ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 301 489-17 V3.2.4 (2020-09) EN 55032:2015+A11:2020 EN 55035:2017+A11:2020 EN IEC 61000-3-2:2019 EN 61000-3-3:2013+A1:2019 EN IEC 62311:2020 EN 62368-1:2014+A11:2017 (Title(s) of regulations, standards, etc.) All essential radio test suites have been carried out. NOTIFIED BODY: MiCOM Labs Inc Address: 575 Boulder Court Pleasanton CA 94566, USA Identification Number: 2280 MANUFACTURER or AUTHORISED REPRESENTATIVE: Address: ELectronic Way Technology Co., Ltd No.268, South Jiguang Rd ShiPu Town, KunShan, JiangSu china 215342 www.sheway.com FCC WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or reloca…

Text truncated - open the document above for the full version.

iFITHealthandFitness,Inc. AgentAuthorization Company:iFITHealthandFitness,Inc. Address:1500S1000WLoganUTUnitedStates84321UnitedStatesOfAmerica ProductName:Tablet ModelNumber(s):MP7-Argon2-E,MP7-Argon-E,MP7-Argon-CHP-E,MP7- Argon2X-E,MP7-Argon2-Nopv-E ProductDescription:Tablet WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:9/6/2022 Name:KrisLuthy Title:RegulatoryComplianceEngineer Company:iFITHealthandFitness,Inc.

iFITHealthandFitness,Inc. Familymodelsdeclarationletter. 9/6/2022 We Company:iFITHealthandFitness,Inc. Address:1500S1000WLoganUTUnitedStates84321UnitedStatesOfAmerica Product:Tablet ModelName:MP7-Argon2-E FamilyModel:MP7-Argon-E,MP7-Argon-CHP-E,MP7-Argon2X-E,MP7-Argon2-Nopv-E AllthemodelarethesamecircuitandRFmodule,exceptthedifferentcountriesofexport,the softwaredisplaylanguageisdifferent,resultingindifferentnaming. Thanks Sincerely, Signature [Name]KrisLuthy [Title]RegulatoryComplianceEngineer iFITHealthandFitness,Inc.

iFITHealthandFitness,Inc. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:9/6/2022 Subject;RequestforConfidentiality FCCID:OMC425338E ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:KrisLuthy Title:RegulatoryComplianceEngineer Email:[email protected]

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

Photo 7 Photo 8 BT/WIFI ANT Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 Photo 15 Photo 16

FCC ID: OMC425338E Maximum Permissible Exposure (MPE) According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method E (V/m) ＝ d GP**30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 *377 **30 D GP From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. BT: Measurement Result Operation Frequency: 2402MHz~2480MHz Power density limited: 1mW/ cm 2 Antenna Type: FPC antenna Antenna gain: 1.97dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1.97/10)=1.57 BR+EDR: conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 2402 6.878 7±18 6.3101.971.570.00201 2441 7.587 7±18 6.3101.971.570.00201 2480 7.219 7±18 6.3101.971.570.00201 2402 5.958 6±17 5.0121.971.570.00161 2441 6.575 6±17 5.0121.971.570.00161 2480 6.343 6±17 5.0121.971.570.00161 2402 6.116 6±17 5.0121.971.570.00161 2441 6.701 6±17 5.0121.971.570.00161 2480 6.469 6±17 5.0121.971.570.00161 Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 2DH5 3DH5 (mW/cm2 )(mW/cm2) Antenna Gain DH5 Max tune-up power BLE: conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 2402 6.873 7±18 6.3101.971.570.00201 2440 7.541 7±18 6.3101.971.570.00201 2480 7.226 7±18 6.3101.971.570.00201 (mW/cm2 )(mW/cm2) Antenna Gain GFSK Max tune-up power Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 2.4G WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, WIFI 802.11n HT40:2422-2452MHz Power density limited: 1mW/ cm 2 Antenna Type: FPC antenna Antenna gain: 1.97dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1.97/10)=1.57 conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 241215.7916±117 50.1191.971.570.01571 243715.4816±117 50.1191.971.570.01571 246216.2616±117 50.1191.971.570.01571 241212.6413±114 25.1191.971.570.00791 243713.5813±114 25.1191.971.570.00791 246212.9613±114 25.1191.971.570.00791 241212.7413±114 25.1191.971.570.00791 243713.6713±114 25.1191.971.570.00791 246213.3113±114 25.1191.971.570.00791 242210.5910±111 12.5891.971.570.00391 243713.5613±114 25.1191.971.570.00791 245210.8810±111 12.5891.971.570.00391 802.11n(H T40) Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 802.11g 802.11n H20 (mW/cm2 )(mW/cm2) Antenna Gain 802.11b Max tune-up power 5G WIFI: Operation Frequency: WIFI 802.11a/n(HT20): 5180-5240MHz;5260-5320MHz,5500- 5700MHz,5745-5825MHz;WIFI 802.11n(HT40): 5190-5230MHz;5270-5310MHz,5510- 5670MHz5755-5795MHz; Power density limited: 1mW/cm Antenna Type: FPC antenna Antenna gain:2.03dBi; R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(2.03/10)=1.57 5.2G conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 51809.97310±111 12.5892.031.600.00401 520010.07310±111 12.5892.031.600.00401 52409.5110±111 12.5892.031.600.00401 51809.9249±110 10.0002.031.600.00321 52009.9939±110 10.0002.031.600.00321 52409.7779±110 10.0002.031.600.00321 51909.6339±110 10.0002.031.600.00321 52309.2739±110 10.0002.031.600.00321 Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 802.11n H20 802.11n H40 (mW/cm2 )(mW/cm2) Antenna Gain 802.11a Max tune-up power 5.3G conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 52609.1889±110 10.0002.031.600.00321 52808.8649±110 10.0002.031.600.00321 53209.0499±110 10.0002.031.600.00321 52608.919±110 10.0002.031.600.00321 52808.829±110 10.0002.031.600.00321 53209.0289±110 10.0002.031.600.00321 52708.7839±110 10.0002.031.600.00321 53109.2049±110 10.0002.031.600.00321 Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 802.11n H20 802.11n H40 (mW/cm2 )(mW/cm2) Antenna Gain 802.11a Max tune-up power 5.6G conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 55009.8229±110 10.0002.031.600.00321 56009.1599±110 10.0002.031.600.00321 57009.0769±110 10.0002.031.600.00321 55009.9869±110 10.0002.031.600.00321 56009.6689±110 10.0002.031.600.00321 57009.4389±110 10.0002.031.600.00321 55108.9439±110 10.0002.031.600.00321 55909.5569±110 10.0002.031.600.00321 56709.0699±110 10.0002.031.600.00321 (mW/cm2 )(mW/cm2) Antenna Gain 802.11a Max tune-up power 802.11n(HT20 ) 802.11n(HT40 ) Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 5.8G conducted power Evaluation result Power density Limits (dBm)(mW)(dBi)Numeric 57459.4579±110 10.0002.031.600.00321 57859.7689±110 10.0002.031.600.00321 58259.849±110 10.0002.031.600.00321 57459.5969±110 10.0002.031.600.00321 57859.619±110 10.0002.031.600.00321 58259.3729±110 10.0002.031.600.00321 57559.1949±110 10.0002.031.600.00321 57959.549±110 10.0002.031.600.00321 (mW/cm2 )(mW/cm2) Antenna Gain 802.11a Max tune-up power Channel Freq. (MHz) modulation Tune-up power (dBm) (dBm) 802.11n H20 802.11n H40 Note: This product does not support simultaneous delivery. Signature: Date: 2022-09-07 NAME AND TITLE (Please print or type): alex li/Manager COMPANY (Please print or type): Shenzhen NTEK Testing Technology Co., Ltd./ 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen P.R. China.

Report No.: S22062100113002 Version.1.3 Page 1 of 49 RADIO TEST REPORT FCC ID: OMC425338E Product: Tablet Trade Mark: iFIT Model No.: MP7-Argon2-E Family Model: MP7-Argon-E, MP7-Argon-CHP-E, MP7-Argon2X-E, MP7-Argon2-Nopv-E Report No.: S22062100113002 Issue Date: Aug 10, 2022 Prepared for iFIT Health and Fitness, Inc. 1500 S 1000 W Logan UT United States 84321 United States Of America Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S22062100113002 Version.1.3 Page 2 of 49 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard .................................................................................................................................. 14 7.1.2 Conformance Limit ................................................................................................................................... 14 7.1.3 Measuring Instruments ............................................................................................................................. 14 7.1.4 Test Configuration .................................................................................................................................... 14 7.1.5 Test Procedure ........................................................................................................................................... 14 7.1.6 Test Results ................................................................................................................................................ 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 15 7.2.1 Applicable Standard .................................................................................................................................. 17 7.2.2 Conformance Limit ................................................................................................................................... 17 7.2.3 Measuring Instruments ............................................................................................................................. 18 7.2.4 Test Configuration .................................................................................................................................... 18 7.2.5 Test Procedure ........................................................................................................................................... 19 7.2.6 Test Results ................................................................................................................................................ 20 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.3.1 Applicable Standard .................................................................................................................................. 26 7.3.2 Conformance Limit ................................................................................................................................... 26 7.3.3 Measuring Instruments ............................................................................................................................. 26 7.3.4 Test Setup .................................................................................................................................................. 26 7.3.5 Test Procedure ........................................................................................................................................... 26 7.3.6 Test Results ................................................................................................................................................ 26 7.4 DUTY CYCLE ..........................................…

Text truncated - open the document above for the full version.

Report No.: S22062100113003 Version.1.3 Page 1 of 80 FCC RADIO TEST REPORT FCC ID: OMC425338E Product: Tablet Trade Mark: iFIT Model No.: MP7-Argon2-E Family Model: MP7-Argon-E, MP7-Argon-CHP-E, MP7-Argon2X-E, MP7-Argon2-Nopv-E Report No.: S22062100113003 Issue Date: Aug 10, 2022 Prepared for iFIT Health and Fitness, Inc. 1500 S 1000 W Logan UT United States 84321 United States Of America Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website:http://www.ntek.org.cn Report No.: S22062100113003 Version.1.3 Page 2 of 80 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 6DB BANDWIDTH ....................................................................................................................................... 27 7.3 DUTY CYCLE ............................................................................................................................................... 29 7.4 MAXIMUM OUTPUT POWER .................................................................................................................... 30 7.5 POWER SPECTRAL DENSITY ................................................................................................................... 32 7.6 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 34 7.7 SPURIOUS RF CONDUCTED EMISSIONS ................................................................................................ 36 7.8 ANTENNA APPLICATION .......................................................................................................................... 37 8 TEST RESULTS ................................................................................................................................................... 38 8.1 MAXIMUM CONDUCTED OUTPUT POWER ....................................................................................................... 38 8.2 OCCUPIED CHANNEL BANDWIDTH .................................................................................................................. 39 8.3 MAXIMUM POWER SPECTRAL DENSITY LEVEL ............................................................................................... 52 8.4 BAND EDGE .................................................................................................................................................... 59 8.5 CONDUCTED RF SPURIOUS EMISSION ............................................................................................................. 68 Report No.: S22062100113003 Version.1.3 Page 3 of 80 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : iFIT Health and Fitness, Inc. Address ....................................... : 1500 S 1000 W Logan UT United States 84321 United States Of America Manufacturer's Name .................. : ELectronic Way Technology Co., Ltd Address ....................................... : No.268, South Jiguang Rd ShiPu Town, KunShan, JiangSu china 215342 Product description Product name .............................. : Tablet Trademark ................................. : iFIT Model and/or type reference ..... : MP7-Argon2-E Family Model ............................... : MP7-Argon-E, MP7-Argon-CHP-E, MP7-Argon2X-E, MP7-Argon2-Nopv-E Test Sample Number .................... S220621001013 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be repro…

Text truncated - open the document above for the full version.

东莞市森岭智能科技有限公司 东莞市松山湖工业东路现代企业加速器6栋402 TEL：86-0769-89208968 FAX：86-0769-89208969 www.sleing.com 承 认 书 项 目 表 序号项目 附件资料 备注 有无 1承认书封面（Spec Cover）□ □ 1.封面需注明产品料号、品名规格 2.经主管核准后加盖公司印章 客户满意度（Customer satisfaction） □ □ 请客户对我司给予真诚的评价 2承认书项目表（Spec Item ）□ □ 3工程成品图（Drawing）□ □ 4电性测试报告（Test Reports ）□ □ 5S参数测试（S Parameter）□ □ 与产品一致 6 方向图(Patten)/测试效率（Test Efficiency） □□ 与产品一致 7 样品检验记录 （Sample inspection） □□ 8SGS报告(SGS Report)□ □ 1.需依产品材质类别及颜色分别提供 2.报告有效期为一年 9其它□□ 依贵司具体要求另行说明 10□ □ 11□ □ 说明： 1.承认书内容需依查核表项目依顺序排列。 2.承认书依客户要求打印份数，SGS报告需加盖工程章. 3.所有材料一律经过客户确认后，任何材料/制程/可能影响产品品质及环境品质 的变更，都必需重新送样给客户确认后方可导入。 4.SGS报告有效期为一年。 5.依实际承认书所附件内容在查核表中勾选：“有”为已提供， “无”根据客户要求提供。 DONGGUAN CITY SLEing INTEL-TECH CO.,LTD ⭥ᙗ⍻䈅ᣕ੺ Test Reports Electrical Properties Frequency 2.4~2.55.15~5.85GHz() Impedance50 0hm Nominal V.S.W.Rİ 1.92 Return Loss-10 dB Max RadiationOmni-directional Gain (Peak) 2±0.5 dBi PolarizationLinear, Vertical Admitted Power2 W Connector MHF Physical Properties Antenna MaterialFPCB Cable Type Ï1.13mm Black Operating Temp. -25~+75 °C Storage Temp. -25~+75 °C Device Antenna ཙ㓯㓴㻵മ Antenna Profile T ⍪㔘㳳孽 6 3DUDPHWHU7HVW $JLOHQW (& 1HWZRUN $QDO\]HU :L)L 驻波 $QWHQQD 12 T ⍪㔘㳳孽 6 3DUDPHWHU7HVW $JLOHQW (& 1HWZRUN $QDO\]HU :L)L 回波损耗 $QWHQQD 12 ⍻䈅䇮༷ Test Setup NFC-500S 3D Chamber Coordinate System Definition Configuration of 3D Chamber ⍻䈅᭸⦷ 7HVW (IILFHQF\

Radiated Measurement Photos Conducted Measurement Photos