ON5-CCPA500BPADRONE SMART

SensorSensor The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Pat. and Design Pat. Pending Copyright© 2014 CATEYE Co., Ltd. CCPA500B-141114 066601195 1 CATEYE PADRONE SMART SMART COMPUTER CC-PA500B Quick Start This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. L’ appareil est conforme à la réglementation FCC, section 15 et Industrie Canada RSS standard exempts de licence (s). Son utilisation est soumise à deux conditions : 1. L’ appareil ne doit pas provoquer d’ interférences nuisibles, et 2. L’ appareil doit supporter les interférences reçues, y compris les interférences empêchant son fonctionnement correct. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by CatEye Co., Ltd. may void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Hereby, CATEYE Co., Ltd., declares that this CC-PA500B is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by CATEYE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners. Click MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE (2 sec.) MODE MODE MODE 7 0 0 x 2 3 c 0 - 9 0 – 23 [1 – 12] 00 – 59 L mmL mm or OPERATION FLOW AM PM MODEMODEMODE (2 sec.)(2 sec.)(2 sec.) Click Search CATEYE PADRONE SMART http://www.cateye.com/manual/CC-PA500B/ L = 100 – 3999 mm 24 12 1 2 3 0 = = = = = = = MENUMENUMENUMENUMENU MODE (2 sec.) MODE (2 sec.) MODE MODE MODE MODE ACAC MENUMENU MENUMENU ACACMENUMENU MENUMENU Power sensor 1603970 Speed sensor (Speed/Cadence) 1603980 Heart rate sensor kit OPTION (ISC-12) (ISC-12) OPTION (HR-12) 4 2 1 1 2 3 3 1 2 3 4 StemStem HandlebarHandlebar Computer Setting up the computer MENUMENU ACAC MODEMODE DOT section DOT section SMARTPHONE + PADRONE SMART PADRONE SMART Only km/h or mph MODE button operation MODE 2 MODE m/hkm/h Sensor ID 3 Searching ID Smartphone search screen Pairing complete For details of pairing, refer to the online manual on our website. 4 Tire size Tire size 24H/12H AM/PM Only when 12H time is selected Hour Minutes Clock 5 Finish 6 Mounting the computer or When no speed sensor is paired, tire size entry is skipped. Pair the computer with the sensor. 40-584650x38B2105 25-63027x1 ( 630 ) 2145 28-63027x1-1/82155 32-63027x1-1/42161 37-63027x1-3/82169 18-622700x18C2070 19-622700x19C2080 20-622700x20C2086 23-622700x23C2096 25-622700x25C2105 28-622700x28C2136 30-622700x30C2146 32-622700x32C2155 700C Tubular2130 35-622700x35C2168 38-622700x38C2180 40-622700x40C2200 42-622700x42C2224 44-622700x44C2235 45-622700x45C2242 47-622700x47C2268 54-62229x2.12288 60-62229x2.32326 56-622 40-584 54-584 57-584 207927.5x1.50 214827.5x2.1 2182 27.5x2.25 50-584209027.5x19.5 229829x2.2 75-55926x3.002170 28-59026x1-1/81970 37-59026x1-3/82068 37-58426x1-1/22100 650C Tubular 26x7/8 1920 20-571650x20C1938 23-571650x23C1944 25-571 650x25C 26x1 ( 571 ) 1952 40-590650x38A2125 ETRTOTire sizeL (mm) ETRTOTire sizeL (mm) 47-20312x1.75935 54-20312x1.95940 40-25414x1.501020 47-25414x1.751055 40-30516x1.501185 47-30516x1.751195 54-30516x2.001245 28-34916x1-1/81290 37-34916x1-3/81300 32-369 17x1-1/4 ( 369 ) 1340 40-35518x1.501340 47-35518x1.751350 32-40620x1.251450 35-40620x1.351460 40-40620x1.501490 47-40620x1.751515 50-40620x1.951565 28-45120x1-1/81545 37-45120x1-3/81615 37-50122x1-3/81770 40-50122x1-1/21785 47-50724x1.751890 50-50724x2.001925 54-50724x2.1251965 25-52024x1 ( 520 ) 1753 24x3/4 Tubular 1785 28-54024x1-1/81795 32-54024x1-1/41905 25-55926x1 ( 559 ) 1913 32-55926x1.251950 37-55926x1.402005 40-55926x1.502010 47-55926x1.752023 50-55926x1.952050 54-55926x2.102068 57-55926x2.1252070 58-55926x2.352083 Heart rate Cadence Power Speed/Cadence Speed ∙ Speed ∙ Cadence ∙ Heart rate ∙ Power Produce a sensor signal. Skip Press and release When installed on bracket Press and hold Type of sensor is automatically detected. Repeat if you have other sensors. * If you ha…

Text truncated - open the document above for the full version.

2015/3/21 製品体積：30.0cc Print Size:H=1.25mm ・Label 3.5

FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products RF Exposure Statement: 50022935 002 Page 1 of 1 Client: CATEYE Co., Ltd. 2-8-25, Kuwazu, Higashi-Sumiyoshi-Ku, Osaka, 546-0041 Japan Test item: PADRONE SMART Identification: CC-PA500B FCC Requirement According to KDB 447498 D01 v05r02, SAR evaluation specified in FCC 2.1093 is not required for portable equipment if the transmitter power is below the following threshold for 100MHz to 6GHz: Highest Frequency of Transmitter Tunable Range [GHz] F [GHz] Min. Test Separation Distance D [mm] 1-g SAR Test Exclusion Threshold (3.0 · D / √F) + X [mW] [mW] 10-g SAR Test Exclusion Threshold (7.5 · D / √F) + X [mW] [mW] 2.480 5 9.525 23.813 Note: X = 0 for D (in mm) ≤ 50mm: X = (D – 50mm) · (1000 · F / 150) for D (in mm) > 50mm and F (in GHz) ≤ 1.5GHz X = (D – 50mm) · 10 for D (in mm) > 50mm and F (in GHz) > 1.5GHz IC Requirement According to RSS-102 (Issue 5), clause 2.5.1, no SAR evaluation is required if the transmitter has a minimum separation distance to the user less than or equal to 20cm and has an output power (both conducted and e.i.r.p.) below the following threshold specified by the usage distance: Frequency [MHz] Separation distance [mm] SAR Evaluation Threshold [mW] 2450 ≤5 4 Measurement Result The maximum measured transmitter power is given in the following table: Conducted Output Power [mW] Maximum Antenna Gain [dBi] EIRP Output Power [mW] 0.515 -4.49 0.183 Conclusion SAR evaluation is not required since the maximum transmitter output power (both conducted and e.i.r.p.) is below the FCC and IC thresholds. Refer to test report 50022935 001 for more details. TÜV Rheinland Japan Ltd. – Global Technology Assessment Center 4-25-2 Kita-Yamata, Tsuzuki-ku, Yokohama 224-0021, Japan

FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 2 von 44 Page 2 of 44 TEST SUMMARY 5.1.1 SUPPLY VOLTAGE REQUIREMENTS RESULT: PASS 5.1.2 ANTENNA REQUIREMENTS RESULT: PASS 5.1.3 RESTRICTED BANDS OF OPERATION RESULT: PASS 5.2.1 CONDUCTED OUTPUT POWER 5.3.1 DUTY CYCLE 5.3.2 20DB BANDWIDTH RESULT: PASS 5.3.3 99% BANDWIDTH 5.3.4 FIELD STRENGTH OF FUNDAMENTAL RESULT: Pass 5.3.5 RADIATED SPURIOUS EMISSIONS OF TRANSMITTER RESULT: PASS 5.4.1 AC POWER LINE CONDUCTED EMISSION OF TRANSMITTER RESULT: N/A FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 3 von 44 Page 3 of 44 Contents 1. GENERAL REMARKS ............................................................................................... 5 1.1 COMPLEMENTARY MATERIALS ................................................................................. 5 2. TEST SITES ............................................................................................................ 5 2.1 TEST FACILITIES ..................................................................................................... 5 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS ...................................................... 6 2.3 MEASUREMENT UNCERTAINTY ................................................................................. 7 3. GENERAL PRODUCT INFORMATION ........................................................................... 8 3.1 PRODUCT FUNCTION AND INTENDED USE .................................................................. 8 3.2 SYSTEM DETAILS .................................................................................................... 8 3.3 CLOCK FREQUENCIES ............................................................................................. 8 3.4 NOISE SUPPRESSING PARTS .................................................................................... 8 4. TEST SET-UP AND OPERATION MODES ..................................................................... 9 4.1 TEST METHODOLOGY .............................................................................................. 9 4.2 OPERATION MODES ................................................................................................ 9 4.3 PHYSICAL CONFIGURATION FOR TESTING ................................................................. 9 4.4 TEST SOFTWARE .................................................................................................. 11 4.5 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ............................................... 12 4.6 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE .............................................. 12 5. TEST RESULTS R ADI O ....................................................................................... 13 5.1 TECHNICAL REQUIREMENTS ................................................................................... 13 5.1.1 Supply Voltage Requirements ................................................................................................... 13 5.1.2 Antenna Requirements .............................................................................................................. 13 5.1.3 Restricted Bands of Operation ................................................................................................... 14 5.2 CONDUCTED MEASUREMENTS AT ANTENNA ............................................................ 15 5.2.1 Conducted Output Power ........................................................................................................... 15 5.3 RADIATED MEASUREMENTS ................................................................................... 16 5.3.1 Duty Cycle .................................................................................................................................. 16 5.3.2 20dB Bandwidth ......................................................................................................................... 17 5.3.3 99% Bandwidth .......................................................................................................................... 20 5.3.4 Field Strength of Fundamental ................................................................................................... 23 5.3.5 Radiated Spurious Emissions of Transmitter ............................................................................. 28 5.4 AC POWER LINE CONDUCTED MEASUREMENTS ...................................................... 37 5.4.1 AC Power Line Conducted Emission of Transmitter .................................................................. 37 6. PHOTOGRAPHS OF THE TEST SETUP....................................................................... 38 FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 4 von 44 Page 4 of 44 7. LIST OF TABLES .................................................................................................... 43 8. LIST OF FIGURES .................................................................................................. 43 9. LIST OF PHOTOGRAPHS ......................................................................................... 44 FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 5 von 44 Page 5 of 44 1. General Remarks 1.1 Complementary Materials There is no attachment to this test report. 2. Test Sites 2.1 Test Facilities TÜV Rheinland Japan Ltd. – Global Technology Assessment Center 4-25-2 Kita-Yamata, Tsuzuki-ku, Yokohama 224-0021, Japan The used test equipment is in accordance with CISPR 16 for measurement of radio interference. The Federal Communications Commission has reviewed the technical characteristics of the radiated and conducted emission facilities and has found these test sites to be in compliance with the requirements of section 2.948 of the FCC rules. The description of the t…

Text truncated - open the document above for the full version.

FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 38 von 44 Page 38 of 44 6. Photographs of the Test Setup Photograph 1: Set-up for RF Conducted Power at Antenna Port FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 39 von 44 Page 39 of 44 Photograph 2: Set-up for Radiated Emission of Transmitter, Measuring Antenna View at 80cm height Photograph 3: Set-up for Radiated Emission of Transmitter, Measuring Antenna View at 1.5m height FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 40 von 44 Page 40 of 44 Photograph 4: Set-up for Radiated Emission, EUT Configuration X-Axis at 80cm height Photograph 5: Set-up for Radiated Emission, EUT Configuration Y-Axis at 80cm height FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 41 von 44 Page 41 of 44 Photograph 6: Set-up for Radiated Emission, EUT Configuration Z-Axis at 80cm height Photograph 7: Set-up for Radiated Emission, EUT Configuration X-Axis at 1.5m height FCC ID:ON5-CCPA500B IC:5672A-CCPA500B Produkte Products Prüfbericht - Nr.: Test Report No.: 50022935 001 Seite 42 von 44 Page 42 of 44 Photograph 8: Set-up for Radiated Emission, EUT Configuration Y-Axis at 1.5m height Photograph 9: Set-up for Radiated Emission, EUT Configuration Z-Axis at 1.5m height