
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Operation Description for R/C XGEAR Scrambler The R/C XGEAR Scrambler is powered by a 1 x 9V size battery. There are two control stick in the front of transmit body. When the forward or backward control stick pushed once, it will transmit a radio signal for receiver go forward and backward. When the Turn left or Turn right control stick pushed once, it will transmit a radio signal for receiver turn left or right. Referring to the transmitter circuit design, the circuit description is listed below: - TX2, 9014 and associated circuit act as encoder. - Y1, 9014 and associated circuit are for oscillator. - Q3 and associated circuit are for amplifier.
TEST REPORT Report No. : AG016948-001 Date : 2006 July 19 Page 1 of 11 FCC ID: OPMHC20028620 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Application No. : LG211854(0) Applicant : High Champion Limited Room 1901, 19/F., Block A, Kailey Ind. Centre, 12 Fung Yip Street, Chai Wan, Hong Kong Sample Description : One(1) submitted sample(s) stated to be R/C XGEAR Scrambler of Model No. 8620 Rating : 1 x 9V size battery No. of submitted sample : One (1) piece(s) *** Date Received : 2006 May 24 Test Period : 2006 June 1 โ 2006 July 17 Test Requested : FCC Part 15 Certification. Test Method : 47 CFR Part 15 (10-1-05 Edition) ANSI C63.4 โ 2003 Test Result : See attached sheet(s) from page 2 to 11. Conclusion : The submitted sample was found to comply with requirement of FCC Part 15 Subpart C. For and on behalf of CMA Industrial Development Foundation Limited Authorized Signature : ____________________________________________________ Danny Chui Deputy Manager - EL. Division TEST REPORT Report No. : AG016948-001 Date : 2006 July 19 Page 2 of 11 FCC ID: OPMHC20028620 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com Table of Contents 1 General Information............................................................................................................................. 3 1.1 General Description ..................................................................................................................... 3 1.2 Location of the test site ................................................................................................................ 4 1.3 List of measuring equipment........................................................................................................ 5 2 Description of the radiated emission test ............................................................................................. 6 2.1 Test Procedure ............................................................................................................................. 6 2.2 Test Result ................................................................................................................................... 6 2.3 Radiated Emission Measurement Data ........................................................................................ 7 3 Description of the Line-conducted Test............................................................................................... 8 3.1 Test Procedure ............................................................................................................................. 8 3.2 Test Result ................................................................................................................................... 8 3.3 Graph and Table of Conducted Emission Measurement Data ..................................................... 8 4 Photograph ........................................................................................................................................... 9 4.1 Photographs of the Test Setup for Radiated Emission and Conduction Emission....................... 9 4.2 Photographs of the External and Internal Configurations of the EUT......................................... 9 5 Supplementary document................................................................................................................... 10 5.1 Bandwidth .................................................................................................................................. 10 5.2 Duty cycle .................................................................................................................................. 10 5.3 Transmission time ...................................................................................................................... 10 6 Appendices......................................................................................................................................... 11 TEST REPORT Report No. : AG016948-001 Date : 2006 July 19 Page 3 of 11 FCC ID: OPMHC20028620 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1 General Information 1.1 General Description The equipment under test (EUT) is a transmitter for R/C XGEAR Scrambler. It is operate at 27.145MHz which is controlled by a crystal. The EUT is powered by 1 x 9V size battery and it has 2pcs of control stick in the EUT. When the control trigger is pressed once, it will transmit the radio frequency signal to receiver. The brief circuit description is listed as follows: - TX2, 9014 and associated circuit act as encoder. - Y1, 9014 and associated circuit act as oscillator. - Q3 and associated circuit act as RF amplify. TEST REPORT Report No. : AG016948-001 Date : 2006 July 19 Page 4 of 11 FCC ID: OPMHC20028620 This document shall not be reproduced except in full or with written approval by the laboratory. CMA Industrial Development Foundation Limited Room 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung St.., Fo Tan, Shatin, Hong Kong. Tel: (852) 2698 8198 Fax: (852) 2695 4177 E-mail: [email protected] Web Site: http://www.cmatcl.com 1.2 Location of the test site Radiated emissions measurements are investigated and taken pursuant to the โฆ
Text truncated - open the document above for the full version.
Room 1302, Yan Hing Centre, 9-13 ยท Fo Tan, Shatin ยท Hong Kong
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 27.145 MHz - 27.145 MHz | - |

RC Toy
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Radio Control Toys - Turbo Twister
Equipment Class
CRR - Superregenerative Receiver
Radio Control Toys - Turbo Twister
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter
Radio Control Mars Detector
Equipment Class
CRR - Superregenerative Receiver
Radio Control Patriot
Equipment Class
DXX - Part 15 Low Power Communication Device Transmitter