OQA-AX0A01Z0W1Transceiver Unit

Date: 13/02/2026 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: OQA-AX0A01Z0W1 We, Autec S.r.l., Via Pomaroli 65 – 36030 Caldogno (VI) ITALY, hereby authorize DEKRA Testing and Certification S.r.l., Via della Fisica, 20 36016, Thiene (VI) – Italy Mr./Ms. Fabio Carraro, e-mail: [email protected], Phone: +39 0445 367702 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, -------------------------------------------- By: Antonio Silvestri Title: Technical Director Company: Autec S.r.l Telephone: +39 0444 901000 e-mail: [email protected]

AX0A0 1Z0W1 label AX0A0 1Z0W1 label position Labels_and_position_ax0a0_1z0w1.pdf label MODEL: J7A TYPE NZ2QH AUTEC Srl Via Pomaroli, 65 – 36030 Caldogno (VI) - Italy TA1604-01 BATTERY ............................................ LPM02 (7.4V ) ............................................................... LPM04 (7.4V ) ........................................................ MBM06MH (7.2V ) RADIO MODULE ............................................ AIRTR42FH PROTECTION DEGREE ............................................. IP65 --- FREQUENCY RANGE ................................... 863-870MHz RF POWER ................................................... <25mW ERP FREQUENCY RANGE ................................... 915-928MHz RF POWER ................................................... <50mW ERP --- FCC ID: OQA-J7ANZ2QH IC: 9061A-J7ANZ2QH HVIN: J7ANZ2QH --- MODEL: J9A TYPE VZ9QH AUTEC Srl Via Pomaroli, 65 – 36030 Caldogno (VI) - Italy TA1722-00 RADIO MODULE ............................................. FSAWIF01A ...................................... with Redpine RS9113-NB0-S1N FREQUENCY RANGE ...... 2402-2480MHz (<61mW ERP) --- --- BATTERY ............................................ LPM04 (7.4V ) ............................................................... LPM05 (7.2V ) PROTECTION DEGREE ............................................. IP65 RADIO MODULE ............................................. AIRTR42FH FREQUENCY RANGE ............863-870MHz (<25mW ERP) FREQUENCY RANGE ............915-928MHz (<50mW ERP) FCC ID: OQA-J9AV Z9QH IC: 9061A-J9AV Z9QH HVIN: J9AV Z9QH MODEL: J9A TYPE VZ9QH AUTEC Srl Via Pomaroli, 65 – 36030 Caldogno (VI) - Italy TA1722-02 RADIO MODULE ............................................. FSAWIF01A FREQUENCY RANGE ...... 2402-2480MHz (<61mW ERP) --- --- BATTERY ............................................ LPM04 (7.4V ) ............................................................... LPM05 (7.2V ) PROTECTION DEGREE ............................................. IP65 RADIO MODULE ............................................. AIRTR42FH FREQUENCY RANGE ............863-870MHz (<25mW ERP) FREQUENCY RANGE ............915-928MHz (<50mW ERP) FCC ID:OQA-J9AVZ9QH IC: 9061A-J9AVZ9QH HVIN: J9AVZ9QH ContainsIC: 8407A-RS9113SB ContainsFCCID:XF6-RS9113SB MODEL AX0A0 TYPE 1Z0W1 IP65 TAEX12-xx AUTEC Srl Via Pomaroli, 65 - 36030 Caldogno (VI) - Italy www.autecsafety.com BATTERY ..................................... LPM03 Ex (3.7 V ) RADIO MODULE ...................................... AIRTR42FHEX --- FREQUENCY RANGE ...... 863-870 MHz (<25 mW ERP) 0948 II 2GD Ex ia IIC T4 Gb Ex ia IIIC T135°C Db I M1 Ex ia I Ma -20°C ≤ Tamb ≤ +60°C TÜV IT 25 ATEX xxx IECEX TÜV xx.xxxx FREQUENCY RANGE ...... 915-928 MHz (<50 mW ERP) FCC ID: OQA-AX0A01Z0W1 IC: 9061A-AX0A01Z0W1 HVIN: AX0A01Z0W1

DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25186501 rev. 1.0 Page 1 of 19 (#) information provided by the customer Test report nr. R25186501 Federal Communication Commission (FCC) Customer Autec S.r.l. Via Pomaroli, 65 – 36030 Caldogno (VI) – Italy (#) FCC ID OQA-AX0A01Z0W1 (#) Description of item tested Remote station (#) Trademark Autec (#) Model and/or type reference Model AX0A0 Type 1Z0W1 (#) Manufacturer Autec S.r.l. Via Pomaroli, 65 – 36030 Caldogno (VI) – Italy (#) Rating(s) 3,7 Vdc from battery Test method requested, standard(s) KDB 447498 D01 General RF Exposure Guidance v06 Tested by (name / position & signature) S. Zanivan Technician Approved by (name / position & signature) F. Marenda Laboratory manager Date of issue 13.11.2025 General disclaimer The test results presented in this report relate only to the item tested. This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. Report template No FCC_SAR_portable_DEKRA DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25186501 rev. 1.0 Page 2 of 19 Summary SUMMARY ..................................................................................................................................................... 2 COMPETENCES AND GUARANTEES ......................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................... 3 DATA PROVIDED BY THE CUSTOMER ...................................................................................................... 3 REFERENCE STANDARDS .......................................................................................................................... 4 USAGE OF SAMPLES ................................................................................................................................... 5 TEST SAMPLE DESCRIPTION ..................................................................................................................... 6 PHOTOS OF THE TEST ITEM ...................................................................................................................... 7 TESTING PERIOD AND PLACE .................................................................................................................. 10 DOCUMENT HISTORY ................................................................................................................................ 10 LIST OF ATTACHMENTS ............................................................................................................................ 10 ENVIRONMENTAL CONDITIONS ............................................................................................................... 11 REMARKS AND COMMENTS ..................................................................................................................... 12 DEVIATIONS FROM TEST SPECIFICATION ............................................................................................. 12 TESTING VERDICTS ................................................................................................................................... 12 VERDICT SUMMARY .................................................................................................................................. 13 TEST RESULTS ........................................................................................................................................... 14 RF EXPOSURE ANALYSIS ............................................................................................................................ 14 ATTACHMENT 1 .......................................................................................................................................... 17 DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25186501 rev. 1.0 Page 3 of 19 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.r.l. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.r.l. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.r.l. at the time of performance of the test. DEKRA Testing and Certification S.r.l. is liable to the customer for the maintenance of the confidentiality of all information related to the item under test and the results of the test. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification S.r.l. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification S.r.l. and the Accreditation Bodies. Data provided by the customer Information relating to the description of the sample, components list, and software/hardware version (if reported) are provided by the customer/manufacturer. DEKRA Testing and Certification S.r.l. cannot be considered responsible for this information, for any other document provided by the customer/manufacturer and …

Text truncated - open the document above for the full version.

DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25186301 rev. 1.0 Page 1 of 60 00152 (#) information provided by the customer Test report nr. R25186301 Federal Communication Commission (FCC) Customer Autec S.r.l. Via Pomaroli, 65 – 36030 Caldogno (VI) – Italy (#) FCC ID OQA-AX0A01Z0W1 (#) Description of item tested Remote station (#) Trademark Autec (#) Model and/or type reference Model AX0A0 Type 1Z0W1 (#) Manufacturer Autec S.r.l. Via Pomaroli, 65 – 36030 Caldogno (VI) – Italy (#) Rating(s) 3,7 Vdc from battery Test method requested, standard(s) FCC Rules & Regulations, Title 47:2024 Part 15 paragraph(s): 203, 204, 205, 207, 209, 215 and 247 Tested by (name / position & signature) S. Zanivan Technician Approved by (name / position & signature) F. Marenda Laboratory manager Date of issue 12.11.2025 General disclaimer The test results presented in this report relate only to the item tested. This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. Report template No 15-247_Hopping_DEKRA DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25186301 rev. 1.0 Page 2 of 60 00152 Summary SUMMARY ..................................................................................................................................................... 2 COMPETENCES AND GUARANTEES ......................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................... 3 DATA PROVIDED BY THE CUSTOMER ...................................................................................................... 3 REFERENCE STANDARDS .......................................................................................................................... 4 USAGE OF SAMPLES ................................................................................................................................... 5 TEST SAMPLE DESCRIPTION ..................................................................................................................... 6 PHOTOS OF THE TEST ITEM ...................................................................................................................... 7 TESTING PERIOD AND PLACE .................................................................................................................. 10 DOCUMENT HISTORY ................................................................................................................................ 10 LIST OF ATTACHMENTS ............................................................................................................................ 10 ENVIRONMENTAL CONDITIONS ............................................................................................................... 11 REMARKS AND COMMENTS ..................................................................................................................... 12 DEVIATIONS FROM TEST SPECIFICATION ............................................................................................. 12 TESTING VERDICTS ................................................................................................................................... 12 VERDICT SUMMARY .................................................................................................................................. 13 TEST RESULTS ........................................................................................................................................... 14 ANTENNA REQUIREMENTS ........................................................................................................................... 14 EMISSIONS IN RESTRICTED FREQUENCY BANDS AND IN UNRESTRICTED FREQUENCY BANDS ............................. 15 20 DB BANDWIDTH ...................................................................................................................................... 36 CHANNEL SEPARATION ................................................................................................................................ 40 NUMBER OF HOPPING CHANNELS ................................................................................................................. 43 TIME OF OCCUPANCY .................................................................................................................................. 47 BAND EDGE ................................................................................................................................................ 50 PEAK OUTPUT POWER ................................................................................................................................ 54 ATTACHMENT 1 .......................................................................................................................................... 58 DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25186301 rev. 1.0 Page 3 of 60 00152 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.r.l. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.r.l. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.r.l. at the time of performance of the test. DEKRA Testing and Certification S.r.l. is li…

Text truncated - open the document above for the full version.

ANT039-01 pag 1 - 2 3_Description_ANT039-01 ANT039-01 The ANT039 antenna is a transducer designed to transmit and receive electromagnetic waves. It can can be used in Autec remote stations and it operates in 870-928MHz frequency band. It is a wide band dipole realized on PCB (printed circuit board). It is connected with a coaxial cable to the RF output of a radio module through a balun circuit which preserves the simmetry of currents between the two branches of the dipole. The ANT039 antenna has the following schematic diagram: ANT039-01 pag 2 - 2 3_Description_ANT039-01 The antenna characteristics is affected by the plastic material nearby it. All the Autec remote stations that use this type of antenna share the same antenna position so as to guarantee the same characteristic of it. Following an example of the resulting gain: By simulation, as this diagram reports, the realized gain of the antenna is -0.3565dBi and the System Total efficiency is -2.01dB.