OQA-FSAACT01ATransceiver Unit

Date: 19/02/2026 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: OQA-FSAACT01A We, Autec S.r.l., Via Pomaroli 65 – 36030 Caldogno (VI) ITALY, hereby authorize DEKRA Testing and Certification S.r.l., Via della Fisica, 20 36016, Thiene (VI) – Italy Mr./Ms. Fabio Carraro, e-mail: [email protected], Phone: +39 0445 367702 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, -------------------------------------------- By: Antonio Silvestri Title: Technical Director Company: Autec S.r.l Telephone: +39 0444 901000 e-mail: [email protected]

Date: 16/12/2025 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: FCC Modular approval letter for FCC ID: OQA-FSAACT01AA To whom it may concern: The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X Modular approval requirement Yes No* (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. Sincerely, -------------------------------------------- By: Antonio Silvestri Title: Technical Director Company: Autec S.r.l Telephone: +39 0444 901000 e-mail: [email protected]

FSAACT01A label FSAACT01A label position Labels_and_position_fsaact01a_rev0.pdf label TA1786-00 MODEL: FSAACT01A FREQUENCY: 915-928 MHz FCC ID: OQA-FSAACT01A Contains FCC ID: OQA-AUBGM240P32 Contains IC: 9061A-AUBGM240P32 IC : 9061A-FSAACT01A HVIN: FSAACT01A AUTEC Srl Via Pomaroli, 65 - 36030 Caldogno (VI) - Italy www.autecsafety.com

DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25198701 rev. 1.0 Page 1 of 18 (#) information provided by the customer Test report nr. R25198701 Federal Communication Commission (FCC) Customer AUTEC S.r.l. Via Pomaroli, 65, 36030 Caldogno (VI) - Italy (#) FCC ID OQA-FSAACT01A (#) Description of item tested Radio module (#) Trademark AUTEC (#) Model and/or type reference FSAACT01A (#) Manufacturer AUTEC S.r.l. Via Pomaroli, 65, 36030 Caldogno (VI) - Italy (#) Rating(s) 7,4 Vdc Test method requested, standard(s) KDB 447498 D01 General RF Exposure Guidance v06 Tested by (name / position & signature) S. Zanivan Technician Approved by (name / position & signature) F. Marenda Laboratory manager Date of issue 20.11.2025 General disclaimer The test results presented in this report relate only to the item tested. This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. Report template No FCC_SAR_portable_DEKRA DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25198701 rev. 1.0 Page 2 of 18 Summary SUMMARY ..................................................................................................................................................... 2 COMPETENCES AND GUARANTEES ......................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................... 3 DATA PROVIDED BY THE CUSTOMER ...................................................................................................... 3 REFERENCE STANDARDS .......................................................................................................................... 4 USAGE OF SAMPLES ................................................................................................................................... 5 TEST SAMPLE DESCRIPTION ..................................................................................................................... 6 PHOTOS OF THE TEST ITEM ...................................................................................................................... 7 TESTING PERIOD AND PLACE .................................................................................................................... 9 DOCUMENT HISTORY .................................................................................................................................. 9 LIST OF ATTACHMENTS .............................................................................................................................. 9 ENVIRONMENTAL CONDITIONS ............................................................................................................... 10 REMARKS AND COMMENTS ..................................................................................................................... 11 DEVIATIONS FROM TEST SPECIFICATION ............................................................................................. 11 TESTING VERDICTS ................................................................................................................................... 11 VERDICT SUMMARY .................................................................................................................................. 12 TEST RESULTS ........................................................................................................................................... 13 RF EXPOSURE ANALYSIS ............................................................................................................................ 13 ATTACHMENT 1 .......................................................................................................................................... 16 DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25198701 rev. 1.0 Page 3 of 18 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.r.l. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.r.l. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.r.l. at the time of performance of the test. DEKRA Testing and Certification S.r.l. is liable to the customer for the maintenance of the confidentiality of all information related to the item under test and the results of the test. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification S.r.l. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification S.r.l. and the Accreditation Bodies. Data provided by the customer Information relating to the description of the sample, components list, and software/hardware version (if reported) are provided by the customer/manufacturer. DEKRA Testing and Certification S.r.l. cannot be considered responsible for this information, for any other document provided by the customer/manufacturer and for any difference between t…

Text truncated - open the document above for the full version.

ANT044-00 pag 1 - 4 3_Description_ANT044-00 ANT044-00 The ANT044 antenna is a transducer designed to transmit and receive electromagnetic waves. It can can be used in Autec remote stations and it can operate in 863-870 MHz, 915-928 MHz and 2400- 2483.5 MHz frequency bands. It is a triple band dipole realized on PCB (printed circuit board). It is connected with a coaxial cable to the RF output of a radio module through a balun microstrip circuit which preserves the simmetry of the currents between the two branches of the dipole. The ANT044 antenna has the following schematic diagram: 1 2 J1 Pad_RG178 105 MM -0 MM +0.3 MM + 0.1 MM 72 MM - ANT044-00 pag 2 - 4 3_Description_ANT044-00 105 MM -0 MM +0.3 MM + 0.1 MM 72 MM - The antenna characteristics is affected by the plastic material nearby it. All the Autec remote stations that use this type of antenna share the same antenna position so as to guarantee the same characteristic of it. ANT044-00 pag 3 - 4 3_Description_ANT044-00 1. Resulting gain in 863-870 MHz and 915-928 MHz frequency band By simulation, as this diagram reports, the realized gain of the antenna is 0.1dBi and the System Total efficiency is -1.78dB. ANT044-00 pag 4 - 4 3_Description_ANT044-00 2. Resulting gain in 2400-2483.5 MHz frequency band By simulation, as this diagram reports, the realized gain of the antenna is 2.44 dBi and the System Total efficiency is -2.76 dB.

DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25198501 rev. 1.0 Page 1 of 66 00152 (#) information provided by the customer Test report nr. R25198501 Federal Communication Commission (FCC) Customer AUTEC S.r.l. Via Pomaroli, 65, 36030 Caldogno (VI) - Italy (#) FCC ID OQA-FSAACT01A (#) Description of item tested Radio module (#) Trademark AUTEC (#) Model and/or type reference FSAACT01A (#) Manufacturer AUTEC S.r.l. Via Pomaroli, 65, 36030 Caldogno (VI) - Italy (#) Rating(s) 7,4 Vdc Test method requested, standard(s) FCC Rules & Regulations, Title 47:2024 Part 15 paragraph(s): 203, 204, 205, 207, 209, 215 and 247 Tested by (name / position & signature) S, Zanivan Technician Approved by (name / position & signature) F. Marenda Laboratory manager Date of issue 19.11.2025 General disclaimer The test results presented in this report relate only to the item tested. This report shall not be reproduced, except in full, without the written approval of DEKRA Testing and Certification S.r.l. Report template No 15-247_Hopping_DEKRA DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25198501 rev. 1.0 Page 2 of 66 00152 Summary SUMMARY ..................................................................................................................................................... 2 COMPETENCES AND GUARANTEES ......................................................................................................... 3 GENERAL CONDITIONS ............................................................................................................................... 3 DATA PROVIDED BY THE CUSTOMER ...................................................................................................... 3 REFERENCE STANDARDS .......................................................................................................................... 4 USAGE OF SAMPLES ................................................................................................................................... 5 TEST SAMPLE DESCRIPTION ..................................................................................................................... 6 PHOTOS OF THE TEST ITEM ...................................................................................................................... 7 TESTING PERIOD AND PLACE .................................................................................................................... 9 DOCUMENT HISTORY .................................................................................................................................. 9 LIST OF ATTACHMENTS .............................................................................................................................. 9 ENVIRONMENTAL CONDITIONS ............................................................................................................... 10 REMARKS AND COMMENTS ..................................................................................................................... 11 DEVIATIONS FROM TEST SPECIFICATION ............................................................................................. 11 TESTING VERDICTS ................................................................................................................................... 11 VERDICT SUMMARY .................................................................................................................................. 12 TEST RESULTS ........................................................................................................................................... 13 ANTENNA REQUIREMENTS ........................................................................................................................... 13 CONDUCTED EMISSION ................................................................................................................................ 14 EMISSIONS IN RESTRICTED FREQUENCY BANDS AND IN UNRESTRICTED FREQUENCY BANDS ............................. 20 20 DB BANDWIDTH ...................................................................................................................................... 42 CHANNEL SEPARATION ................................................................................................................................ 46 NUMBER OF HOPPING CHANNELS ................................................................................................................. 49 TIME OF OCCUPANCY .................................................................................................................................. 53 BAND EDGE ................................................................................................................................................ 56 PEAK OUTPUT POWER ................................................................................................................................ 60 ATTACHMENT 1 .......................................................................................................................................... 64 DEKRA Testing and Certification S.r.l. Via della Fisica 20, 36016 Thiene (VI) - Italy Tel. +39 0445 367702 - [email protected] Report nr.: R25198501 rev. 1.0 Page 3 of 66 00152 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.r.l. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.r.l. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at …

Text truncated - open the document above for the full version.